Effect of the surface acid sites of tungsten trioxide for highly selective hydrogenation of cellulose to ethylene glycol

Sulfonated P-W modified nitrogen-containing carbon-based solid acid catalysts for one-pot conversion of cellulose to ethyl levulinate under water-ethanol medium

Converting cellulose (Cel) into ethyl levulinate (EL) is one of the promising strategies for supplying liquid fuels. In this paper, the prepared sulfonated P-W-modified N-containing carbon-based solid acid catalyst (PWNCS), in which the Polyaniline (PANI) was employed as N and C precursors, successfully converted Cel into EL under the water-ethanol medium. The characterization results demonstrated that a tiny addition of P increased the Brønsted acid sites (BAS) content and defective WO3 provided the Lewis acid sites (LAS), meanwhile, the sulfonation process did not change the fundamental structure but introduced the sulfonic groups to dramatically increase the acidic content. Therefore, under optimized reaction conditions, PWNCS realized about 100% Cel conversion and 71.61% of EL yield, furthermore, the selectivity of EL reached 89.14%. In addition, the effect of water on the reaction pathway of Cel to EL over PWNCS was proposed. The addition of water generally resulted in the hydration of defective WO3 to reduce the LAS and increase BAS, which significantly inhibited the side reactions of retro-aldol condensation (RAC) and subsequent etherification reactions during Cel conversion and then improved the selectivity of EL.

Unveiling the mechanism for selective cleavage of C-C bonds in sugar reactions on tungsten trioxide-based catalysts

Conversion of naturally occurring sugars, the most abundant biomass resources on Earth, to fuels and chemicals provides a sustainable and carbon-neutral alternative to the current fossil resource-based processes. Tungsten-based catalysts (e.g., WO3) are efficient for selectively cleaving C-C bonds of sugars to C2,3 oxygenate intermediates (e.g., glycolaldehyde) that can serve as platform molecules with high viability and versatility in the synthesis of various chemicals. Such C-C bond cleavage follows a mechanism distinct from the classical retro-aldol condensation. Kinetic, isotope 13C-labeling, and spectroscopic studies and theoretical calculations, reveal that the reaction proceeds via a surface tridentate complex as the critical intermediate on WO3, formed by chelating both α- and β-hydroxyls of sugars, together with the carbonyl group, with two adjacent tungsten atoms (W-O-W) contributing to the β-C-C bond cleavage. This mechanism provides insights into sugar chemistry and enables the rational design of catalytic sites and reaction pathways toward the efficient utilization of sugar-based feedstocks.

Tungsten oxide decorated silica-supported iridium catalysts combined with HZSM-5 toward the selective conversion of cellulose to C6 alkanes

Herein, WO_x-decorated Ir/SiO₂ (W/Ir = 0.06) and HZSM-5 were coupled to selectively convert microcrystalline cellulose (MCC) into C₆ alkanes. A 92.8% yield of liquid alkanes including an 85.3% yield of C₆ alkanes was produced at 210 °C. Cellulose hydrolysis, glucose hydrogenation and sorbitol hydrodeoxygenation were integrated to produce alkanes via a sorbitol route. Ir-WO_x/SiO₂ showed high performance for hydrogenation and hydrodeoxygenation reactions after hydrolysis catalyzed by HZSM-5. The intimate contact between WO_x and Ir enhanced the synergistic interaction through the electron transfer from Ir to WO_x. The interaction strengthened the reduction capability of Ir for hydrogenations, as well as improved the adsorption and activation of C-O bonds on reduced WO_x for deoxygenations. The monotungstate WO_x species provided moderate Lewis acids to cooperate with Ir to accelerate hydrodeoxygenations with alleviated retro-aldol condensation to yield more C₆ alkanes.

Synergistic Effect of Ni/W/Cu on MgAl2O4 for One-Pot Hydrogenolysis of Cellulose to Ethylene Glycol at a Low H2 Pressure

Nickel and tungsten, combined with copper, were incorporated into a magnesium aluminum spinel to form a multifunctional catalyst (Ni-W-Cu/MgAl₂O₄). Characterization results suggested that the adjacent Cu not only facilitated the reduction of W⁶⁺ to W⁵⁺ with substantial oxygen vacancies but also promoted the reducibility of the Ni species. Besides, the incorporation of Ni, W, and Cu into the support enhanced the catalytic acidity, as well as the L acid sites. The catalyst exhibited a strong synergistic effect between the three metals and the support, resulting in higher catalytic activity for the one-pot hydrogenolysis of cellulose to ethylene glycol. High cellulose conversion (100%) and ethylene glycol yield (52.8%) were obtained, even under a low H₂ pressure of 3 MPa.

Enhanced one-pot selective conversion of cellulose to ethylene glycol over NaZSM-5 supported metal catalysts

The mesopores/micropores NaZSM-5 was synthesised by sol–gel method. The 5%Al–8%Ni–25%W/NaZSM-5 catalyst exhibited the highest cellulose conversion of 100% with EG yield as high as 89% (C mol%) at moderate reaction conditions which is highly applicable in polymer Industry.

Cellulose Conversion Into Hexitols and Glycols in Water: Recent Advances in Catalyst Development

Conversion of biomass cellulose to value-added chemicals and fuels is one of the most important advances of green chemistry stimulated by needs of industry. Here we discuss modern trends in the development of catalysts for two processes of cellulose conversion: (i) hydrolytic hydrogenation with the formation of hexitols and (ii) hydrogenolysis, leading to glycols. The promising strategies include the use of subcritical water which facilitates hydrolysis, bifunctional catalysts which catalyze not only hydrogenation, but also hydrolysis, retro-aldol condensation, and isomerization, and pretreatment (milling) of cellulose together with catalysts to allow an intimate contact between the reaction components. An important development is the replacement of noble metals in the catalysts with earth-abundant metals, bringing down the catalyst costs, and improving the environmental impact.

Natural freezing-thawing pretreatment of corn stalk for enhancing anaerobic digestion performance

Natural freezing-thawing (NFT) was proposed as a low energy input and alternative pretreatment method for high biomethane production from corn stalk (CS) by anaerobic digestion (AD). The CS was pretreated by freezing-thawing in winter season using different pretreatment time periods (7d, 14d, 21d and 28d) and solid-to-liquid ratios (1:2, 1:4, 1:6, 1:8 and 1:10). The results showed that CS pretreated for 21d coupled with a solid-to-liquid ratio of 1:6 achieved the best result among all pretreatment conditions. In this case, the biomethane yield and VS removal rate of CS reached the highest values of 253 mL·g_vs^-1 and 58.6%, respectively_, which were 40.5% and 27.4% higher than that of the untreated. It was also found that the predominant bacterial and archaeal at genus level in AD were Clostridium_sensu_stricto_1 (36.1%) and Methanobacterium (54.0%), respectively. This study provided that NFT is a simple pretreatment strategy for efficient AD bioconversion of CS to biomethane.