Direct conversion of cellulose into sorbitol catalyzed by a bifunctional catalyst

An Overview of Heterogeneous Catalysts Based on Hypercrosslinked Polystyrene for the Synthesis and Transformation of Platform Chemicals Derived from Biomass

Platform chemicals, also known as chemical building blocks, are substances that serve as starting materials for the synthesis of various value-added products, which find a wide range of applications. These chemicals are the key ingredients for many fine and specialty chemicals. Most of the transformations of platform chemicals are catalytic processes, which should meet the requirements of sustainable chemistry: to be not toxic for humans, to be safe for the environment, and to allow multiple reuses of catalytic materials. This paper presents an overview of a new class of heterogeneous catalysts based on nanoparticles of catalytically active metals stabilized by a polymer matrix of hypercrosslinked polystyrene (HPS). This polymeric support is characterized by hierarchical porosity (including meso- and macropores along with micropores), which is important both for the formation of metal nanoparticles and for efficient mass transfer of reactants. The influence of key parameters such as the morphology of nanoparticles (bimetallic versus monometallic) and the presence of functional groups in the polymer matrix on the catalytic properties is considered. Emphasis is placed on the use of this class of heterogeneous catalysts for the conversion of plant polysaccharides into polyols (sorbitol, mannitol, and glycols), hydrogenation of levulinic acid, furfural, oxidation of disaccharides, and some other reactions that might be useful for large-scale industrial processes that aim to be sustainable. Some challenges related to the use of HPS-based catalysts are addressed and multiple perspectives are discussed.

Production of Sorbitol via Hydrogenation of Glucose over Ruthenium Coordinated with Amino Styrene-co-maleic Anhydride Polymer Encapsulated on Activated Carbon (Ru/ASMA@AC) Catalyst

Sorbitol, a product primarily derived from glucose hydrogenation, has extensive applications in the pharmaceutical, chemical and other industries. Amino styrene-co-maleic anhydride polymer encapsulated on activated carbon (Ru/ASMA@AC) catalysts were developed for efficient glucose hydrogenation and were prepared and confined Ru by coordination with styrene-co-maleic anhydride polymer (ASMA). Through single-factor experiments, optimal conditions were determined to be 2.5 wt.% ruthenium loading and a catalyst usage of 1.5 g, 20% glucose solution at 130 °C, reaction pressure of 4.0 MPa, and a stirring speed of 600 rpm for 3 h. These conditions achieved a high glucose conversion rate of 99.68% and a sorbitol selectivity of 93.04%. Reaction kinetics testing proved that the hydrogenation of glucose catalyzed by Ru/ASMA@AC was a first-order reaction, with a reaction activation energy of 73.04 kJ/mol. Furthermore, the catalytic performance of the Ru/ASMA@AC and Ru/AC catalysts for glucose hydrogenation were compared and characterized by various detection methods. The Ru/ASMA@AC catalyst exhibited excellent stability after five cycles, whereas the traditional Ru/AC catalyst suffered from a 10% decrease in sorbitol yield after three cycles. These results suggest that the Ru/ASMA@AC catalyst is a more promising candidate for high-concentration glucose hydrogenation due to its high catalytic performance and superior stability.

Construction of a stable biochar-supported amorphous aluminum solid acid catalyst with Brønsted–Lewis dual acid sites for efficient conversion of cellulose

The development of sustainable catalysts for the efficient conversion of biomass to desirable chemicals is significant and challenging. Herein, a stable biochar (BC)-supported amorphous aluminum solid acid catalyst with Brønsted-Lewis dual acid sites was constructed through one-step calcination of a mechanical activation (MA)-treated precursor (starch, urea, and Al(NO₃)₃). The as-prepared N-doped BC (N-BC)-supported Al composite (MA-Al/N-BC) was used for the selective catalytic conversion of cellulose to produce levulinic acid (LA). MA treatment promoted uniform dispersion and stable embedding of Al-based components in the N-BC support with nitrogen- and oxygen-containing functional groups. This process provided the MA-Al/N-BC catalyst with Brønsted-Lewis dual acid sites and improved its stability and recoverability. When the MA-Al/N-BC catalyst was used under optimal reaction conditions (180 °C, 4 h), it achieved a cellulose conversion rate of 93.1 % and a LA yield of 70.1 %. Additionally, it also showed high activity for catalytic conversion of other carbohydrates. The results of this study offer a promising solution for the production of sustainable biomass-derived chemicals through the use of stable and eco-friendly catalysts.

Chemocatalytic value addition of glucose without carbon-carbon bond cleavage/formation reactions: an overview

As the monomeric unit of the abundant biopolymer cellulose, glucose is considered a sustainable feedstock for producing carbon-based transportation fuels, chemicals, and polymers. The chemocatalytic value addition of glucose can be broadly classified into those involving C-C bond cleavage/formation reactions and those without. The C6 products obtained from glucose are particularly satisfying because their syntheses enjoy a 100% carbon economy. Although multiple derivatives of glucose retaining all six carbon atoms in their moiety are well-documented, they are somewhat dispersed in the literature and never delineated coherently from the perspective of their carbon skeleton. The glucose-derived chemical intermediates discussed in this review include polyols like sorbitol and sorbitan, diols like isosorbide, furanic compounds like 5-(hydroxymethyl)furfural, and carboxylic acids like gluconic acid. Recent advances in producing the intermediates mentioned above from glucose following chemocatalytic routes have been elaborated, and their derivative chemistry highlighted. This review aims to comprehensively understand the prospects and challenges associated with the catalytic synthesis of C6 molecules from glucose.

One-pot synthesis of sorbitol via hydrolysis-hydrogenation of cellulose in the presence of Ru-containing composites

The aim of this work was to study the one-pot synthesis of sorbitol via hydrolysis-hydrogenation of cellulose in the presence of Ru-containing composites based on H₃PW₁₂O₄₀ supported on ZrO₂ and Nb₂O₅ (Ru-PW/ZrO₂ and Ru-PW/Nb₂O₅). The main parameters impacted the reaction rate and yield of sorbitol, i.e. reaction conditions and type of catalyst were investigated. Ru-PW/ZrO₂ systems were more active than Ru-PW/Nb₂O₅. The yield of sorbitol was found to depend on the activation temperature of PW/ZrO₂ and PW/Nb₂O₅ which affected textural properties, the amount of acid sites and size of Ru nanoparticles. The highest 66% sorbitol yield was observed in the presence of 3%Ru-PW/ZrO₂ activated at 550 °C and 1/1 of weight ratio of cellulose/catalyst, 180 °C, 7 MPa hydrogen pressure. This catalyst was stable for three cycles of the reaction without lost of it's activity.

Mesoporous Activated Carbon Supported Ru Catalysts to Efficiently Convert Cellulose into Sorbitol by Hydrolytic Hydrogenation

Catalysts consisting of Ru nanoparticles (1 wt%), supported on mesoporous activated carbons (ACs), were prepared and used in the one-pot hydrolytic hydrogenation of cellulose to obtain sorbitol. The carbon materials used as supports are a pristine commercial mesoporous AC (named SA), and two samples derived from it by sulfonation or oxidation treatments (named SASu and SAS, respectively). The catalysts have been thoroughly characterized regarding both surface chemistry and porosity, as well as Ru electronic state and particle size. The amount and type of surface functional groups in the carbon materials becomes modified as a result of the Ru incorporation process, while a high mesopore volume is preserved upon functionalization and Ru incorporation. The prepared catalysts have shown to be very active, with cellulose conversion close to 50% and selectivity to sorbitol above 75%. The support functionalization does not lead to an improvement of the catalysts’ behavior and, in fact, the Ru/SA catalyst is the most effective one, with about 50% yield to sorbitol, and a very low generation of by-products.

Catalytic Production of Oxygenated and Hydrocarbon Chemicals From Cellulose Hydrogenolysis in Aqueous Phase

As the most abundant polysaccharide in lignocellulosic biomass, a clean and renewable carbon resource, cellulose shows huge capacity and roused much attention on the methodologies of its conversion to downstream products, mainly including platform chemicals and fuel additives. Without appropriate treatments in the processes of cellulose decompose, there are some by-products that may not be chemically valuable or even truly harmful. Therefore, higher selectivity and more economical and greener processes would be favored and serve as criteria in a correlational study. Aqueous phase, an economically accessible and immensely potential reaction system, has been widely studied in the preparation of downstream products of cellulose. Accordingly, this mini-review aims at making a related summary about several conversion pathways of cellulose to target products in aqueous phase. Mainly, there are four categories about the conversion of cellulose to downstream products in the following: (i) cellulose hydrolysis hydrogenation to saccharides and sugar alcohols, like glucose, sorbitol, mannose, etc.; (ii) selective hydrogenolysis leads to the cleavage of the corresponding glucose C-C and C-O bond, like ethylene glycol (EG), 1,2-propylene glycol (PG), etc.; (iii) dehydration of fructose and further oxidation, like 5-hydroxymethylfurfural (HMF), 2,5-furandicarboxylic acid (FDCA), etc.; and (iv) production of liquid alkanes via hydrogenolysis and hydrodeoxygenation, like pentane, hexane, etc. The representative products were enumerated, and the mechanism and pathway of mentioned reaction are also summarized in a brief description. Ultimately, the remaining challenges and possible further research objects are proposed in perspective to provide researchers with a lucid research direction.

Peroxide-periodate co-modification of carboxymethylcellulose to prepare polysaccharide-based tanning agent with high solid content

Dialdehyde carboxymethylcellulose (DCMC) solution generally has quite low solid content, which inevitably limits its industrial application. In this work, carboxymethylcellulose sodium (Na-CMC) was pre-degraded using H₂O₂ followed by periodate oxidation for preparing DCMC with high solid content as practical tanning agent. Pre-degradation conditions optimization showed that H₂O₂ dosage most impacted the tanning effect of DCMC, and the M_w and viscosity of Na-CMC underwent remarkable reduction. FT-IR and ¹H NMR illustrated that aldehyde group was successfully introduced into DCMC after periodate oxidation. Under the optimized conditions, the solid content of DCMC could be improved to around 30%. This DCMC could endow tanned leather with high shrinkage temperature and satisfactory fiber dispersion. Besides, DCMC tanned leather had comparable physical and organoleptic properties to those of leathers tanned by chrome tanning agent and commercial polyaldehyde tanning agent TWT. This suggests the prospect of DCMC with high solid content as useful tanning agent.