Improving enzymatic saccharification of hardwood through lignin modification by carbocation scavengers and the underlying mechanisms

Efficacy and Functional Mechanisms of a Two-Stage Pretreatment Approach Based on Alkali and Ionic Liquid for Bioconversion of Waste Medium-Density Fiberboard

A novel pretreatment strategy utilizing a combination of NaOH and 1-Butyl-3-methylimidazolium chloride ([Bmim]Cl) was proposed to enhance the enzymatic hydrolysis of abandoned Medium-density fiberboard (MDF). The synergistic effect of NaOH and [Bmim]Cl pretreatment significantly improved the glucose yield, reaching 445.8 mg/g within 72 h, which was 5.04 times higher than that of the untreated samples. The working mechanism was elucidated according to chemical composition, as well as FTIR, 13C NMR, XRD, and SEM analyses. The combined effects of NaOH and [Bmim]Cl led to lignin degradation, hemicellulose removal, the destruction and erosion of crystalline regions, pores, and an irregular microscopic morphology. In addition, by comparing the enzymatic hydrolysis sugar yield and elemental nitrogen content of untreated MDF samples, eucalyptus, and hot mill fibers (HMF), it was demonstrated that the presence of adhesives and additives in waste MDF significantly influences its hydrolysis process. The sugar yield of untreated MDF samples (88.5 mg/g) was compared with those subjected to hydrothermal pretreatment (183.2 mg/g), Ionic liquid (IL) pretreatment (406.1 mg/g), and microwave-assisted ionic liquid pretreatment (MWI) (281.3 mg/g). A long water bath pretreatment can reduce the effect of adhesives and additives on the enzymatic hydrolysis of waste MDF. The sugar yield produced by the combined pretreatment proposed in this study and the removal ability of adhesives and additives highlight the great potential of our pretreatment technology in the recycling of waste fiberboard.

Coproduction of xylooligosaccharides, glucose, and less-condensed lignin from sugarcane bagasse using syringic acid pretreatment

Current strategies for the production of xylooligosaccharides (XOS) from biomass through non-enzymatic catalysis often led to a certain degree of lignin condensation, which severely restrains subsequent enzyme hydrolysis of cellulose. Herein, syringic acid (SA) pretreatment was investigated to coproduce XOS, glucose, and less-condensed lignin from sugarcane bagasse. SA acted as a catalyst and lignin condensation inhibitor during the pretreatment. The highest XOS yield of 58.7% (27.7% xylobiose and 24.7% xylotriose) was obtained at 180 °C - 20 min - 9% SA, and the corresponding xylose/XOS ratio was only 0.42. Compared with the pretreatment at 180 °C - 20 min - 0% SA, the addition of 9% SA increased the glucose yield from 85.7% to 92.4% and decreased the degree of lignin condensation from 0.55 to 0.42. Moreover, 26.7% of SA could be easily recovered. This work presents a pretreatment strategy in which the efficient production of XOS and the suppression of lignin condensation are achieved simultaneously.

Correlation between physicochemical characteristics of lignin deposited on autohydrolyzed wood chips and their cellulase enzymatic hydrolysis

Enzymatic hydrolysis is a method to generate biofuel from biomass, and autohydrolysis is a popular method to pretreat biomass prior to enzymatic hydrolysis. The primary aim of the present study was to determine the role of lignin produced in the autohydrolysis process on the enzymatic hydrolysis of biomass. The HSQC and ³¹P NMR analyses confirmed that β-O-4 of lignin was reduced, while β-5, β-β, and S/G-ratio of lignin were increased with intensifying the hydrolysis intensity.The increase in the hydrolysis intensity significantly enhanced the condensed and non-condensed phenolic OH group of lignin. Interestingly, the cellulase enzyme adsorbed more on lignin that had more phenolic content, and its association with lignin reduced its activity for hydrolyzing cellulose microcrystals. Strong negative correlations were observed between the enzymatic hydrolysis yield and the condensed S-OH (r² = 0.978) and G-OH (r² = 0.961) of lignin generated in the autohydrolysis process.

Organosolv pretreatment assisted by carbocation scavenger to mitigate surface barrier effect of lignin for improving biomass saccharification and utilization

BACKGROUND

Ethanol organosolv (EOS) pretreatment is one of the most efficient methods for boosting biomass saccharification as it can achieve an efficient fractionation of three major constituents in lignocellulose. However, lignin repolymerization often occurs in acid EOS pretreatment, which impairs subsequent enzymatic hydrolysis. This study investigated acid EOS pretreatment assisted by carbocation scavenger (2-naphthol, 2-naphthol-7-sulfonate, mannitol and syringic acid) to improve biomass fractionation, coproduction of fermentable sugars and lignin adsorbents. In addition, surface barrier effect of lignin on cellulose hydrolysis was isolated from unproductive binding effect of lignin, and the analyses of surface chemistry, surface morphology and surface area were carried out to reveal the lignin inhibition mitigating effect of various additives.

RESULTS

Four different additives all helped mitigate lignin inhibition on cellulose hydrolysis in particular diminishing surface barrier effect, among which 2-naphthol-7-sulfonate showed the best performance in improving pretreatment efficacy, while mannitol and syringic acid could serve as novel green additives. Through the addition of 2-naphthol-7-sulfonate, selective lignin removal was increased up to 76%, while cellulose hydrolysis yield was improved by 85%. As a result, 35.78 kg cellulose and 16.63 kg hemicellulose from 100 kg poplar could be released and recovered as fermentable sugars, corresponding to a sugar yield of 78%. Moreover, 22.56 kg ethanol organosolv lignin and 17.53 kg enzymatic hydrolysis residue could be recovered as lignin adsorbents for textile dye removal, with the adsorption capacities of 45.87 and 103.09 mg g^-1, respectively.

CONCLUSIONS

Results in this work indicated proper additives could give rise to the form of less repolymerized surface lignin, which would decrease the unproductive binding of cellulase enzymes to surface lignin. Besides, the supplementation of additives (NS, MT and SA) resulted in a simultaneously increased surface area and decreased lignin coverage. All these factors contributed to the diminished surface barrier effect of lignin, thereby improving the ease of enzymatic hydrolysis of cellulose. The biorefinery process based on acidic EOS pretreatment assisted by carbocation scavenger was proved to enable the coproduction of fermentable sugars and lignin adsorbents, allowing the holistic utilization of lignocellulosic biomass for a sustainable biorefinery.

Comparison of the effects of different pretreatments on the structure and enzymatic hydrolysis of Miscanthus

Miscanthus is regarded as a desired bioenergy crop with enormous lignocellulose residues for biofuels and other chemical products. In this study, the effect of different pretreatments (including microwave, NaOH, CaO, and microwave + NaOH/CaO) on sugar yields was investigated, leading to largely varied hexose yields at 4.0-73.4% (% cellulose) released from enzymatic hydrolysis of pretreated Miscanthus residues. Among them, the highest yield of 73.4% for hexoses was obtained from 12% NaOH (w/v) solution pretreatment, whereas 1% CaO (w/w) and microwave pretreatment resulted in a lower hexose yield than the control (without pretreatment). The sugar yield from microwave followed with 1% NaOH pretreatment was 4.3 times higher than that of microwave followed with 1% CaO. However, the enzymatic hydrolysis efficiencies of the sample were 15.2% and 58.5% under microwave pretreatment followed by 12% NaOH or 12.5% CaO, respectively, which were lower than those of the same concentration of alkali (NaOH and CaO) pretreatments. To investigate the mechanism of varied enzymatic saccharification under different pretreatments, the changes in the surface structure and porosity of the Miscanthus-pretreated lignocelluses were studied by means of Fourier transform infrared, Congo red staining, and scanning electron microscopy analysis. The results show that the different pretreatments destroy the cell wall cladding structure and reduce the bonding force between cellulose, hemicellulose, and lignin to different degrees, therefore increasing the accessibility of cellulose and enhancing cellulose digestion.

Comparative study on enzymatic digestibility of acid-pretreated poplar and larch based on a comprehensive analysis of the lignin-derived recalcitrance

Enzymatic digestibility of an acid-pretreated poplar (AP, 42.9%) was superior to that of a similarly acid-pretreated larch (AL, 12.5%). Effects of lignin-related recalcitrance on enzymatic hydrolysis were comprehensively investigated by disrupting the two predominant lignin fractions present in acid-pretreated material (extractable lignin and bulk lignin). Lignin removal and bovine serum albumin (BSA) addition were performed to estimate the relative contributions of lignin towards physical blocking and enzyme binding on enzymatic hydrolysis. The lignin physical blocking played a more significant role in limiting the enzymatic hydrolysis of AL. BSA addition improved enzymatic hydrolysis of AP more significantly than AL. Moreover, the effects of lignin embedded in the lignocellulosic matrix on enzyme non-productive binding were compared with the isolated lignin. It indicated that the lignin distribution would influence the lignin effects on enzyme non-productive binding during enzymatic hydrolysis. Results will give insights towards improvement of enzymatic hydrolysis on acid-pretreated woody biomass.