Hysteresis effect on backwashing process in a submerged hollow fiber membrane bioreactor (MBR) applied to membrane fouling mitigation

Prolonging the Life Span of Membrane in Submerged MBR by the Application of Different Anti-Biofouling Techniques

The membrane bioreactor (MBR) is an efficient technology for the treatment of municipal and industrial wastewater for the last two decades. It is a single stage process with smaller footprints and a higher removal efficiency of organic compounds compared with the conventional activated sludge process. However, the major drawback of the MBR is membrane biofouling which decreases the life span of the membrane and automatically increases the operational cost. This review is exploring different anti-biofouling techniques of the state-of-the-art, i.e., quorum quenching (QQ) and model-based approaches. The former is a relatively recent strategy used to mitigate biofouling. It disrupts the cell-to-cell communication of bacteria responsible for biofouling in the sludge. For example, the two strains of bacteria Rhodococcus sp. BH4 and Pseudomonas putida are very effective in the disruption of quorum sensing (QS). Thus, they are recognized as useful QQ bacteria. Furthermore, the model-based anti-fouling strategies are also very promising in preventing biofouling at very early stages of initialization. Nevertheless, biofouling is an extremely complex phenomenon and the influence of various parameters whether physical or biological on its development is not completely understood. Advancing digital technologies, combined with novel Big Data analytics and optimization techniques offer great opportunities for creating intelligent systems that can effectively address the challenges of MBR biofouling.

Up-concentration processes of organics for municipal wastewater treatment: New trends in separation

Carbon neutrality is a pressing goal for the whole society. Over 20% of municipality electrical energy on public utilities was consumed by the operation of wastewater treatment plants (WWTPs). Up-concentration of organic matters and maximum energy recovery is essential for a more sophisticated municipal wastewater management. Chemical coagulation and biological adsorption have been used to achieve efficient carbon capture, while separation is an overlooked step. It may lead to poor effluent quality, as well as consume most of the time and volume. The introduction of new driving forces, such as pressure and magnetism, significantly improved the retention rate and speed, respectively. In this paper, recent works were comprehensively reviewed and a horizontal comparison was conducted from aspects of separation speed, retention rate, concentrate characteristics and economic costs. This review also discussed the selection of technologies under different conditions. Finally, the practical application, fouling mitigation with considering the value of the concentrate, identification of unique concentrate characteristics, and the establishment of an evaluation system was suggested as core issues for future researches. This review will promote the development of an energy-efficient wastewater treatment system with up-concentration processes.

Characterizing the roles of pretreatment methods for model suspensions in the membrane fouling process: The case of yeast and kaolin

Model suspensions are important substances for characterizing fouling processes to study the mechanism of membrane fouling, thus, choosing a suitable standard suspension is critical for researches on membrane fouling processes. The pretreatment methods of model suspensions have long been neglected, which can alter the physical and chemical properties and affect fouling results. This study compared four different pretreatment methods (centrifuging and drying, magnetic stirring, ultrasonic processing, and dissolving in buffer solution) and found effects on size distribution, dispersion stability, pH variation over time, and fouling properties. Among the characterization of model suspensions, different pretreatment methods led to various changes in physical and chemical properties in this study. Membrane filtration experiments showed that these four pretreatments changed the rate of membrane fouling. The results of the analysis of filtration flux for suspensions indicated that for ultrasonic processing of all suspensions and magnetic stirring of kaolin suspensions, pore blocking was the main mechanism, while cake formation was dominant for the others. Therefore, special attention should be placed on different pretreatment methods and selecting appropriate model foulants. Finally, some guidance on selecting appropriate model foulants was given in the study.