Enhancement of dark fermentative H2 production by gas separation membranes: A review

Hydrogen production pathways in Clostridia and their improvement by metabolic engineering

Biological production of hydrogen has a tremendous potential as an environmentally sustainable technology to generate a clean fuel. Among the different available methods to produce biohydrogen, dark fermentation features the highest productivity and can be used as a means to dispose of organic waste biomass. Within this approach, Clostridia have the highest theoretical H2 production yield. Nonetheless, most strains show actual yields far lower than the theoretical maximum: improving their efficiency becomes necessary for achieving cost-effective fermentation processes. This review aims at providing a survey of the metabolic network involved in H2 generation in Clostridia and strategies used to improve it through metabolic engineering. Together with current achievements, a number of future perspectives to implement these results will be illustrated.

Effect of Bimetallic-Activated Carbon Impregnation on Adsorption-Desorption Performance for Hydrogen Sulfide (H2S) Capture

This study reports on the impregnation of bi-metallic adsorbents based on commercial coconut activated carbon (CAC), surface-modified with metal acetate (ZnAc₂), metal oxide (ZnO and TiO₂), and the basic compound potassium hydroxide (KOH). The morphology of the adsorbents was then characterized with SEM-EDX, the microporosity was determined using Brunauer-Emmett-Teller (BET) analysis, the thermal stability was investigated via thermogravity analysis (TGA), and functional group analysis was undertaken with Fourier-transform infrared (FTIR) spectroscopy. These modified adsorbents were subjected to a real adsorption test for H₂S capture using a 1 L adsorber with 5000 ppm H₂S balanced for N₂, with temperature and pressure maintained at an ambient condition. Adsorption-desorption was carried out in three cycles with the blower temperature varied from 50 °C to 150 °C as the desorption condition. Characterization results revealed that the impregnated solution homogeneously covered the adsorbent surface, effecting the morphology and properties. Based on this study, it was found that ZnAc₂/TiO₂/CAC_DCM showed a significant increase in adsorption capacity with the different temperatures applied for the desorption in the second cycle: 1.67 mg H₂S/g at 50 °C, 1.84 mg H₂S/g at 100 °C, and 1.96 mg H₂S/g at 150 °C. ZnAc₂/ZnO/CAC_DCM seemed to produce the lowest percentage of degradation in the three cycles for all the temperatures used in the adsorption-desorption process. Therefore, ZnAc₂/ZnO/CAC_DCM has the potential to be used and commercialized for biogas purification for H₂S removal.

Integrated biohydrogen production via lignocellulosic waste: Opportunity, challenges & future prospects

Hydrogen production through biological route is the cleanest, renewable and potential way to sustainable energy generation. Productions of hydrogen via dark and photo fermentations are considered to be more sustainable and economical approach over numerous existing biological modes. Nevertheless, both the biological modes suffer from certain limitations like low yield and production rate, and because of these practical implementations are still far away. Therefore, the present review provides an assessment and feasibility of integrated biohydrogen production strategy by combining dark and photo-fermentation as an advanced biochemical processing while using lignocellulosics biomass to improve and accelerate the biohydrogen production technology in a sustainable manner. This review also evaluates practical viability of the integrated approach for biohydrogen production along with the analysis of the key factors which significantly influence to elevate this technology on commercial ground with the implementation of various environment friendly and innovative approaches.

Renewable hydrogen production by dark-fermentation: Current status, challenges and perspectives

Global urbanization has resulted in amplified energy and material consumption with simultaneous waste generation. Current energy demand is mostly fulfilled by finite fossil reserves, which has critical impact on the environment and thus, there is a need for carbon-neutral energy. In this view, biohydrogen (bio-H₂) is considered suitable due to its potential as a green and dependable carbon-neutral energy source in the emerging 'Hydrogen Economy'. Bio-H₂ production by dark fermentation of biowaste/biomass/wastewater is gaining significant attention. However, bio-H₂production still holds critical challenges towards scale-up with reference to process limitations and economic viabilities. This review illustrates the status of dark-fermentation process in the context of process sustainability and achieving commercial success. The review also provides an insight on various process integrations for maximum resource recovery including closed loop biorefinery approach towards the accomplishment of carbon neutral H₂ production.

Biohydrogen production in a continuous liquid/gas hollow fiber membrane bioreactor: Efficient retention of hydrogen producing bacteria via granule and biofilm formation

The aim of this work was to develop a continuous liquid/gas membrane bioreactor (L/G MBR), i.e. a fermenting module including hollow fibers membrane for L/G separation, for biohydrogen production by dark fermentation. Originally seeded with sludge from a wastewater treatment plant, the L/G MBR underwent a complete stop for eight months. It was then operated without further reseeding. In the present experiment, performed 551 days after the last reseeding, average hydrogen yield of 1.1 ± 0.2 mol per mol glucose added and hydrogen productivity of 135 ± 22 mL/L/h were reached, with acetate and butyrate as the main metabolite products. DNA sequence analysis revealed that Clostridium beijerinckii, Clostridium pasteurianum and Enterobacter sp. were dominant in liquid outlet, in a biofilm on the surface of the hollow fibers and in microbial granules. The L/G MBR has potential for the concentration and the long-term maintenance of an active hydrogen-producing bacterial community without need for reseeding.