Valorization of waste eggshell-derived bioflocculant for harvesting T. obliquus: Process optimization, kinetic studies and recyclability of the spent medium for circular bioeconomy

Self-flocculation behaviour of cellulose-based bioflocculant synthesized from sewage water grown Chlorella sorokiniana and Scenedesmus abundans

The global energy crisis has spurred a shift from conventional to clean and sustainable energy sources. Biomass derived from microalgae is emerging as an alternative energy source with diverse applications. Despite the numerous advantages of microalgae, large-scale biomass harvesting is not economical and convenient. Self-flocculation is considered an effective phenomenon facilitated by extracting the flocculating substances from microalgae that assist aggregation of algal cells into flocs. A novel cellulose-based bioflocculant has been synthesized from sewage water grown Chlorella sorokiniana and Scenedesmus abundans for harvesting application. The produced bioflocculant amounted to 38.5% and 19.38% of the dry weight of S. abundans and C. sorokiniana, respectively. Analysis via FTIR, XRD, and FESEM-EDX revealed the presence of cellulose hydroxyapatite (HA) in algae-derived cellulose. Harvesting efficiencies of 95.3% and 89.16% were attained for S. abundans and C. sorokiniana, respectively, at a dosage of 0.5 g/L. Furthermore, the bioflocculant was recovered, enabling its reuse with recovery efficiencies of 52% and 10% for S. abundans and C. sorokiniana, respectively. This simple and efficient approach has the potential to replace other harvesting methods, thereby contributing to the economic algal biofuel production.

Technologies for harvesting the microalgae for industrial applications: Current trends and perspectives

Microalgae are emerging as a promising source for augmenting the supply of essential products to meet global demands in an environmentally sustainable manner. Despite the potential benefits of microalgae in industry, the high energy consumption for harvesting remains a significant obstacle. This review offers a comprehensive overview of microalgae harvesting technologies and their industrial applications, with particular emphasis on the latest advances in flocculation techniques. These cutting-edge methods have been applied to biodiesel production, food and nutraceutical processing, and wastewater treatment. Large-scale harvesting is still severely impeded by the high cost despite progress has been made in laboratory studies. In the future, cost-effective microalgal harvesting will rely on efficient resource utilization, including the use of waste materials and the reuse of media and flocculants. Additionally, precise regulation of biological metabolism will be necessary to overcome algal species-related limitations through the development of extracellular polymeric substance-induced flocculation technology.

Bioconversion of biowaste into renewable energy and resources: A sustainable strategy

Due to its high amount of organic and biodegradable components that can be recycled, biowaste is not only a major cause of environmental contamination, but also a vast store of useful materials. The transformation of biowaste into energy and resources via biorefinery is an unavoidable trend, which could aid in reducing carbon emissions and alleviating the energy crisis in light of dwindling energy supplies and mounting environmental difficulties related with solid waste. In addition, the current pandemic and the difficult worldwide situation, with their effects on the economic, social, and environmental aspects of human life, have offered an opportunity to promote the transition to greener energy and sources. In this context, the current advancements and possible trends of utilizing widely available biowaste to produce key biofuels (such as biogas and biodiesel) and resources (such as organic acid, biodegradable plastic, protein product, biopesticide, bioflocculant, and compost) are studied in this review. To achieve the goal of circular bioeconomy, it is necessary to turn biowaste into high-value energy and resources utilizing biological processes. In addition, the usage of recycling technologies and the incorporation of bioconversion to enhance process performance are analyzed critically. Lastly, this work seeks to reduce a number of enduring obstacles to the recycling of biowaste for future use in the circular economy. Although it could alleviate the global energy issue, additional study, market analysis, and finance are necessary to commercialize alternative products and promote their future use. Utilization of biowaste should incorporate a comprehensive approach and a methodical style of thinking, which can facilitate product enhancement and decision optimization through multidisciplinary integration and data-driven techniques.

Microbial Activity during Composting and Plant Growth Impact: A Review

Replacing harmful chemical pesticides with compost extracts is steadily gaining attention, offering an effective way for plant growth enhancement and disease management. Food waste has been a major issue globally due to its negative effects on the environment and human health. The methane and other harmful organisms released from the untreated waste have been identified as causes of this issue. Soil bacteria impart a very important role in biogeochemical cycles. The interactions between plants and bacteria in the rhizosphere are some of the factors that determine the health and fertility of the soil. Free-living soil bacteria are known to promote plant growth through colonizing the plant root. PGPR (Plant Growth Promoting Rhizobacteria) inoculants in compost are being commercialized as they help in the improvement of crop growth yield and provide safeguard and resistance to crops from disease. Our focus is to understand the mechanism of this natural, wet waste recycling process and implementation of a sustainable operative adaptation with microbial association to ameliorate the waste recycling system.

Cattle wastewater as a low-cost supplement augmenting microalgal biomass under batch and fed-batch conditions

The utilization of costly chemical fertilizers and large freshwater requirements make the microalgae cultivation process uneconomical and highly unsustainable. To address this challenge, the present study aimed to integrate cattle wastewater (CW) (alternate for fertilizers) with domestic sewage wastewater (DSW) (substitute for freshwater) to cultivate Chlorella thermophile. To maximize the biomass yield, in-depth nutrient consumption patterns in both batch and fed-batch cultivation conditions were analyzed. Out of the eight (1%-4.5%) different CW feed concentrations tested during the batch cultivation, 2.5% CW set gave the highest biomass yield (2.17 g L^-1), which was almost double the yield obtained using Bold Basal Medium (1.24 g L^-1) and DSW without any CW addition (1.22 g L^-1). However, the biomass yield declined with CW> 2.5%, and the ammonium (NH₄⁺) inhibitory effect was observed. To address the (NH₄⁺) toxicity challenge and further enhance the biomass yield, fed-batch experiments were designed with an intermittent CW feeding based on nutrient (NH₄⁺) consumption pattern. The fed-batch cultivation resulted in twofold increased biomass yield (4.52 g L^-1) in comparison to the batch process. The nutrient consumption pattern inferred that the (NH₄⁺) concentration greater than 600 mg L^-1 during the logarithmic phase was inhibitory for Chlorella thermophila cells. On biomass characterization, a significant improvement in protein content with CW addition was observed. The FAME analysis of the derived lipid stated its competitive biofuel quality with up-gradation of C:16 and C:18 groups. Based on the obtained results, projection analysis for an integrated rural model demonstrated the technology's potential for sustainable water management with valuable resource recovery.

Novel approach for harvesting of microalgal biomass using electric geyser waste material deposit as flocculant in coupling with poultry excreta leachate

The aim of this work was to study the flocculation efficiency of algal biomass (Chlorella pyrenoidosa) in coupling with waste materials i.e. poultry excreta leachate by using other waste material which was obtained from deposition of scaling in electric geyser. Utilization of electric geyser waste material deposit (EGWMD) for flocculation is a novel approach because of various elements which are replica of chemical flocculants responsible for flocculation mechanism in culture medium. Flocculation process was optimized by response surface methodology and 98.21% flocculation efficiency was achieved with designed process parameters as temperature 32.5 °C, flocculant dose 275 mgL^-1, pH 5 and time 30 min. The reusability of spent medium was also analyzed at 70.2% and 32.5% flocculation efficiency with two successive steps. The cellular morphology of pre-harvested and post-harvested Chlorella pyrenoidosa was also observed. EGWMD is abundant and freely available that has no application till now and can alternate of chemical flocculants.

Valorization of de-oiled microalgal biomass as a carbon-based heterogeneous catalyst for a sustainable biodiesel production

In this study, a novel carbon-based solid acid catalyst was synthesized by carbonization of de-oiled microalgal biomass followed by sulfonation. The effect of catalyst synthesis conditions such as carbonization temperature, sulfonation time, and H₂SO₄ concentration on the surface acidity of the catalyst and free fatty acid conversion was determined. The de-oiled microalgal biomass-based solid acid (DMB) catalyst was predominantly composed of carboxylic, phenolic, and sulfonic groups as indicated by the FTIR analysis and supported by the XPS analysis. The catalyst was further characterized by various methods to determine its physiochemical properties. A maximum fatty acid methyl ester (FAME) yield of 94.23% for microalgal oil (AO) and 96.25% for waste cooking oil (WCO) was obtained under optimized transesterification conditions. The catalyst exhibited high catalytic activity (FAME yield >90%) until the fourth cycle. Most of the biodiesel properties were within the permissible limit of EN 14,212 and ASTM D6751 standards.

Preparation of a bacterial flocculant by using caprolactam as a sole substrate and its application in amoxicillin removal

High cost is one of the limiting factors in the industrial production of bioflocculant. Simultaneous preparation of bioflocculant from the contaminants in wastewater was considered as a potential approach to reduce the production cost. In this study, caprolactam was verified as sole feedstock for the growth of strain Alcaligenes faecalis subsp. phenolicus ZY-16 in batch experiments. Chemical analysis showed that the as-prepared MBF-16 consisted of heteropolysaccharides (88.3%) and peptides (9.4%). XPS result indicated the plentiful acylamino, hydroxyl and amino groups in MBF-16, which have an indispensable role in amoxicillin flocculation. The flocculation of amoxicillin can be well stimulated by Freundlich isotherm equation, and the Kf was up to 178.6524 for amoxicillin. The kinetic fitting results proved that the flocculation of amoxicillin by MBF-16 was chemisorbed. This contribution may develop a novel technology for the preparation of bacterial flocculants that can consume toxic substrates (caprolactam) and have potential applications in amoxicillin removal.

Recent advances and perspectives in efforts to reduce the production and application cost of microbial flocculants

Microbial flocculants are macromolecular substances produced by microorganisms. Due to its non-toxic, harmless, and biodegradable advantages, microbial flocculants have been widely used in various industrial fields, such as wastewater treatment, microalgae harvest, activated sludge dewatering, heavy metal ion adsorption, and nanoparticle synthesis, especially in the post-treatment process of fermentation with high safety requirement. However, compared with the traditional inorganic flocculants and organic polymeric flocculants, the high production cost is the main bottleneck that restricts the large-scale production and application of microbial flocculants. To reduce the production cost of microbial flocculant, a series of efforts have been carried out and some exciting research progresses have been achieved. This paper summarized the research advances in the last decade, including the screening of high-yield strains and the construction of genetically engineered strains, search of cheap alternative medium, the extraction and preservation methods, microbial flocculants production as an incidental product of other biological processes, combined use of traditional flocculant and microbial flocculant, and the production of microbial flocculant promoted by inducer. Moreover, this paper prospects the future research directions to further reduce the production cost of microbial flocculants, thereby promoting the industrial production and large-scale application of microbial flocculants.

Improvement of two-stage composting of green waste by addition of eggshell waste and rice husks

With the development of urban greening and increases in the human population, the production of green waste (GW) has been increasing in China. Although GW is biodegradable, its composting is difficult because of its low degradation rate. This study focuses on how addition of eggshell waste (ESW; at 0, 10, and 20%) and/or rice husks (RH; at 0, 15, and 25%) affects the two-stage composting of GW on the basis of temperature, bulk density, particle-size distribution, pH, nitrogen changes, carbon dioxide emission, organic matter degradation, humic substances, the activities of microorganisms and enzymes, and the phytotoxicity to germinating seeds. The combined addition of 10% ESW and 25% RH produced the highest quality compost in the shortest time. To produce a stable and mature product, two-stage composting of GW required 30 days without additives but only 20 days with the combined addition of 10% ESW and 25% RH.