Development of a single helical baffle to increase CO2 gas and microalgal solution mixing and Chlorella PY-ZU1 biomass yield

Regulation of microclimate and shading effects of microalgal photobioreactors on rooftops: Microalgae as a promising emergent for green roof technology

Urban areas remarkably affect global public health due to their emissions of greenhouse gases and poor air quality. Although urban areas only cover 2% of the Earth's surface, they are responsible for 80% of greenhouse gas emissions. Dense buildings limit vegetation, leading to increased air pollution and disruption of the local and regional carbon cycle. The substitution of urban gray roofs with microalgal green roofs has the potential to improve the carbon cycle by sequestering CO2 from the atmosphere. Microalgae can fix 15-50 times more CO2 than other types of vegetation. Advanced microalgal-based green roof technology may significantly accelerate the reduction of atmospheric CO2 in a more effective way. Microalgal green roofs also enhance air quality, oxygen production, acoustic isolation, sunlight absorption, and biomass production. This endeavor yields the advantage of simultaneously generating protein, lipids, vitamins, and a spectrum of valuable bioactive compounds, including astaxanthin, carotenoids, polysaccharides, and phycocyanin, thus contributing to a green economy. The primary focus of the current work is on analyzing the ecological advantages and CO2 bio-fixation efficiency attained through microalgal cultivation on urban rooftops. This study also briefly examines the idea of green roofs, clarifies the ecological benefits associated with them, discusses the practice of growing microalgae on rooftops, identifies the difficulties involved, and the positive aspects of this novel strategy.

Recent advances in microalgal production, harvesting, prediction, optimization, and control strategies

The market value of microalgae has grown exponentially over the past two decades, due to their use in the pharmaceutical, nutraceutical, cosmetic, and aquatic/animal feed industries. In particular, high-value products such as omega-3 fatty acids, proteins, and pigments derived from microalgae have high demand. However, the supply of these high-value microalgal bioproducts is hampered by several critical factors, including low biomass and bioproduct yields, inefficiencies in monitoring microalgal growth, and costly harvesting methods. To overcome these constraints, strategies such as synthetic biology, bubble generation, photobioreactor designs, electro-/magnetic-/bioflocculation, and artificial intelligence integration in microalgal production are being explored. These strategies have significant promise in improving the production of microalgae, which will further boost market availability of algal-derived bioproducts. This review focuses on the recent advances in these technologies. Furthermore, this review aims to provide a critical analysis of the challenges in existing algae bioprocessing methods, and highlights future research directions.

Unlocking the potential of microalgae bio-factories for carbon dioxide mitigation: A comprehensive exploration of recent advances, key challenges, and energy-economic insights

Microalgae are promising alternatives to mitigate atmospheric CO₂ owing to their fast growth rates, resilience in the face of adversity and ability to produce a wide range of products, including food, feed supplements, chemicals, and biofuels. However, to fully harness the potential of microalgae-based carbon capture technology, further advancements are required to overcome the associated challenges and limitations, particularly with regards to enhancing CO₂ solubility in the culture medium. This review provides an in-depth analysis of the biological carbon concentrating mechanism and highlights the current approaches, including species selection, optimization of hydrodynamics, and abiotic components, aimed at improving the efficacy of CO₂ solubility and biofixation. Moreover, cutting-edge strategies such as gene mutation, bubble dynamics and nanotechnology are systematically outlined to elevate the CO₂ biofixation capacity of microalgal cells. The review also evaluates the energy and economic feasibility of using microalgae for CO₂ bio-mitigation, including challenges and prospects for future development.

Recent advances in CO2 fixation by microalgae and its potential contribution to carbon neutrality

Many countries and regions have set their schedules to achieve the carbon neutrality between 2030 and 2070. Microalgae are capable of efficiently fixing CO₂ and simultaneously producing biomass for multiple applications, which is considered one of the most promising pathways for carbon capture and utilization. This work reviews the current research on microalgae CO₂ fixation technologies and the challenges faced by the related industries and government agencies. The technoeconomic analysis indicates that cultivation is the major cost factor. Use of waste resources such as wastewater and flue gas can significantly reduce the costs and carbon footprints. The life cycle assessment has identified fossil-based electricity use as the major contributor to the global warming potential of microalgae-based CO₂ fixation approach. Substantial efforts and investments are needed to identify and bridge the gaps among the microalgae strain development, cultivation conditions and systems, and use of renewable resources and energy.

Dynamic Foam Characteristics during Cultivation of Arthrospira platensis

This study is aimed at understanding the serious foaming problems during microalgal cultivation in industrial raceway ponds by studying the dynamic foam properties in Arthrospira platensis cultivation. A. platensis was cultivated in a 4 L bowl bioreactor for 4 days, during which the foam height above the algal solution increased from 0 to 30 mm with a bubble diameter of 1.8 mm, and biomass yield reached 1.5 g/L. The algal solution surface tension decreased from 55 to 45 mN/m, which favored the adsorption of microalgae on the bubble to generate more stable foams. This resulted in increased foam stability (FS) from 1 to 10 s, foam capacity (FC) from 0.3 to 1.2, foam expansion (FE) from 15 to 43, and foam maximum density (FMD) from 0.02 to 0.07. These results show a decrease in CO₂ flow rate and operation temperature when using the Foamscan instrument, which minimized the foaming phenomenon in algal solutions to a significantly lower and acceptable level.

Enhancing microalgae production by installing concave walls in plate photobioreactors

In order to optimize light distribution for promoting biomass growth rate of Chlorella pyrenoidosa, concave walls were installed in plate photobioreactors (PBR) to generate rotational flow field of microalgal solution circulated from top inlets to bottom outlets. Flow vortices in four corners of concave-wall PBR resulted in decreased mixing time and increased mass transfer coefficient. The CO₂ bio-fixation by C. pyrenoidosa increased by 27% and chlorophyll-a concentration enhanced by 18.5% in concave-wall PBR compared to those in control (flat-wall) PBR. The concave walls diverge light rays to enhance frontal light exposure and supply more light photons into interior regions of PBRs. The promotion in light distribution and vortex flow field with concave walls enhanced light and nutrients utilization by microalgal cells, leading to an increased biomass growth rate by 21%.

Analysis of productivity in raceway photobioreactor using computational fluid dynamics particle tracking coupled to a dynamic photosynthesis model

Raceway photobioreactors (RWPs) are the most common and affordable device for the mass culture of microalgae but due to geometry and the requirement of low input power, its photosynthetic performance is low. The fluid dynamics of RWPs have been studied for information such as energy dissipation and shear rate, CFD has never been used to analyze photosynthesis efficiency by coupling dynamic photosynthesis models with microalgae trajectories. In this work, we investigate by CFD simulation the effect of circulation velocities between 0.2 and 0.8 m s-1in a 0.15 m-1 deep RWPs under standard outdoor conditions to shows that in all circumstances the RWP from the point o view of photosynthesis operates as a perfectly segregated device (no mixing) and that the average growth rate is the result of the integration of the local growth rates at different depths (integration factor Γ = 0).