Energy-efficient pretreatments for the enhanced conversion of microalgal biomass to biofuels

Advanced biofuel production, policy and technological implementation of nano-additives for sustainable environmental management - A critical review

This review article critically evaluates the significance of adopting advanced biofuel production techniques that employ lignocellulosic materials, waste biomass, and cutting-edge technology, to achieve sustainable environmental stewardship. Through the analysis of conducted research and development initiatives, the study highlights the potential of these techniques in addressing the challenges of feedstock supply and environmental impact and implementation policies that have historically plagued the conventional biofuel industry. The integration of state-of-the-art technologies, such as nanotechnology, pre-treatments and enzymatic processes, has shown considerable promise in enhancing the productivity, quality, and environmental performance of biofuel production. These developments have improved conversion methods, feedstock efficiency, and reduced environmental impacts. They aid in creating a greener and sustainable future by encouraging the adoption of sustainable feedstocks, mitigating greenhouse gas emissions, and accelerating the shift to cleaner energy sources. To realize the full potential of these techniques, continued collaboration between academia, industry representatives, and policymakers remains essential.

Fate of five bisphenol derivatives in Chlamydomonas mexicana: Toxicity, removal, biotransformation and microalgal metabolism

Bisphenols (BPs) are recognized as emerging contaminants because of their estrogenic properties and frequent occurrence in environmental matrices. Here, we evaluated the toxic effects of five common BPs on freshwater microalga Chlamydomonas mexicana and removal of the BPs by the alga. Bisphenols -AF (BPAF), -B (BPB), and -Z (BPZ) (96 h, EC50 1.78-12.09 mg·L-1) exhibited higher toxicity to C. mexicana compared to bisphenol -S (BPS) and -F (BPF) (96 h, EC50 30.53-85.48 mg·L-1). In contrast, the mixture of BPs exhibited acute toxicity (96 h, EC50 8.07 mg·L-1). After 14 days, C. mexicana had effectively removed 61%, 99%, 55%, 87%, and 89% of BPS, BPF, BPAF, BPB, and BPZ, respectively, at 1 mg L-1. The biotransformed products of all five BPs were analyzed using UHPLC QTOF, and their toxicity was predicted. All biotransformed products were observed to be less toxic than the parent compounds. The fatty acid composition of C. mexicana after exposure to the BP mixture was predominantly palmitic acid (34.14%), followed by oleic acid (18.9%), and γ-linolenic acid (10.79%). The results provide crucial information on the ecotoxicity of these five BPs and their removal by C. mexicana; the resulting biomass is a potential feedstock for producing biodiesel.

Microalgae biomass deconstruction using green solvents: Challenges and future opportunities

Microalgae enablefixation of CO₂into carbohydrates, lipids, and proteins through inter and intracellularly biochemical pathways. These cellular components can be extracted and transformed into renewable energy, chemicals, and materials through biochemical and thermochemical transformation processes.However, recalcitrant cell wall andlack of environmentally benign efficient pretreatment processes are key obstacles in the commercialization of microalgal biorefineries.Thus,current article describes the microalgal chemical structure, type, and structural rigidity and summarizes the traditional pretreatment methods to extract cell wall constituents. Green solvents such as ionic liquid (ILs), deep eutectic solvents (DES), and natural deep eutectic solvents (NDESs) have shown interesting solvent characteristics to pretreat biomass with selective biocomponent extraction from microalgae. Further research is needed in task-specific IL/DES design, cation-anion organization, structural activity understanding of ILs-biocomponents, environmental toxicity, biodegradability, and recyclability for deployment of carbon-neutral technologies. Additionally, coupling the microalgal industry with biorefineries may facilitate waste management, sustainability, and gross revenue.

Current trends in the pretreatment of microalgal biomass for efficient and enhanced bioenergy production

Biofuels from microalgal biomass is among some of the promising sustainable energy technologies that can significantly replace the dependence on fossil fuels worldwide due to potentiality to lower CO₂ emissions. Nevertheless, the extraction of biomolecules for biofuel generation is inhibited by the rigidity of the cellular structure of microalgal biomass. Various pretreatment strategies have been evaluated for their efficacy in microalgal cell wall disruption to enhance microalgal bioenergy production. However, the efficiency of the pretreatment methods depend on the particular species being treated due to the inherent variability of the composition of the cell wall. This paper reviews pretreatment strategies (mainly novel physical, chemical and physicochemical) employed in bioenergy generation from microalgal biomass, address existing constraints and provides prospects for economic and industrial-scale production. The authors have also discussed the different pretreatment methods used for biodiesel, bioethanol, and biohydrogen production.

Feasibility assessment of bioethanol production from humic acid-assisted alkaline pretreated Kentucky bluegrass (Poa pratensis L.) followed by downstream enrichment using direct contact membrane distillation

The effective fractionation of structural components of abundantly available lignocellulosic biomass is essential to unlock its full biorefinery potential. In this study, the feasibility of humic acid on the pretreatment of Kentucky bluegrass biomass in alkaline condition was assessed to separate 70.1% lignin and hydrolyzable biocomponents. The humic acid-assisted delignification followed by enzymatic saccharification yielded 0.55 g/g of reducing sugars from 7.5% (w/v) pretreated biomass loading and 16 FPU/g of cellulase. Yeast fermentation of the biomass hydrolysate produced 76.6% (w/w) ethanol, which was subsequently separated and concentrated using direct contact membrane distillation. The hydrophobic microporous flat-sheet membrane housed in a rectangular-shaped crossflow module and counter-current mode of flow of the feed (hot) and distillate (cold) streams yielded a flux of 11.6 kg EtOH/m²/24 h. A modular, compact, flexible, and eco-friendly membrane-integrated hybrid approach is used for the first time to effectively valorize Kentucky bluegrass biomass for sustainable production of biofuel.

A Review of Trends in the Energy Use of Biomass: The Case of the Dominican Republic

This review examines the use of residual biomass as a renewable resource for energy generation in the Dominican Republic. The odology includes a thorough examination of scientific publications in recent years about logistics operations. The use of mathematical models can be beneficial for the selection of areas with a high number of residual biomass and processing centers; for the design of feedstock allocation; for the planning and selection of the mode of transport; and for the optimization of the supply chain, logistics, cost estimation, availability of resources, energy efficiency, economic performance, and environmental impact assessment. It is also essential to consider the exhaustive analysis of the most viable technological solutions among the conversion processes, in order to guarantee the minimum emissions of polluting or greenhouse gases. In addition, this document provides a critical review of the most relevant challenges that are currently facing logistics linked to the assessment of biomass in the Dominican Republic, with a straightforward approach to the complementarity and integration of non-manageable renewable energy sources.

Biological-Based Produced Water Treatment Using Microalgae: Challenges and Efficiency

Produced water (PW) is the most significant waste stream generated in the oil and gas industries. The generated PW has the potential to be a useful water source rather than waste. While a variety of technologies can be used for the treatment of PW for reuse, biological-based technologies are an effective and sustainable remediation method. Specifically, microalgae, which are a cost-effective and sustainable process that use nutrients to eliminate organic pollutants from PW during the bioremediation process. In these treatment processes, microalgae grow in PW free of charge, eliminate pollutants, and generate clean water that can be recycled and reused. This helps to reduce CO2 levels in the atmosphere while simultaneously producing biofuels, other useful chemicals, and added-value products. As such, this review focuses on PW generation in the oil and gas industry, PW characteristics, and examines the available technologies that can be used for PW remediation, with specific attention to algal-based technologies. In addition, the various aspects of algae growth and cultivation in PW, the effect of growth conditions, water quality parameters, and the corresponding treatment performance are presented. Lastly, this review emphasizes the bioremediation of PW using algae and highlights how to harvest algae that can be processed to generate biofuels for added-value products as a sustainable approach.

Strategies and advances in the pretreatment of microalgal biomass

Modification of structural components, especially the cell wall, through adequate pretreatment strategies is critical to the bioconversion efficiency of algal biomass to biorefinery products. Over the years, several physical, physicochemical, chemical and green pretreatment methods have been developed to achieve maximum productivity of desirable by-products to sustain a circular bioeconomy. The effectiveness of the pretreatment methods is however, species specific due to diversity in the innate nature of the microalgal cell wall. This review provides a comprehensive overview of the most notable and promising pretreatment strategies for several microalgae species. Methods including the application of stress, ultrasound, electromagnetic fields, pressure, heat as well as chemical solvents (ionic liquids, supercritical fluids, deep eutectic solvents etc.) have been detailed and analyzed. Enzyme and hydrolytic microorganism based green pretreatment methods have also been reviewed. Metabolic engineering of microorganisms for product specificity and lower inhibitors can be a future breakthrough in microalgal pretreatment.

High-throughput integrated pretreatment strategies to convert high-solid loading microalgae into high-concentration biofuels

The commercial feasibility of energy-efficient conversion of highly concentrated microalgal suspensions to produce high-titer biofuels is a major bottleneck due to high energy consumption. Herein, high-titer biofuels (bioethanol, higher-alcohols, and biodiesel) were generated from carbohydrate-rich Chlamydomonas mexicana and lipid-rich Chlamydomonas pitschmannii biomass through energy-saving microwave pretreatment, successive fermentation, and transesterification. Microwave pretreatment needed low specific energy (4.2 MJ/kg) for 100 g/L of microalgal suspension. Proposed sustainable integrated pretreatments method achieved unprecedented total conversion efficiency (67%) and highest biomass utilization (87%) of C. pitschmannii (100 g/L) with high yields of bioethanol (0.48 g-ethanol/g-carbohydrates), higher-alcohols (0.44 g-higher-alcohols/g-proteins), and biodiesel (0.90 g-biodiesel/g-lipids). Transmission electron microscopy showed the changes in the microalgal cellular integrity before and after sequential fermentations. Energy-efficient integrated pretreatments enhanced the extraction efficiency and whole utilization of high-concentration microalgae to generate high-titer biofuels with minimum waste production.

Microwave Assisted Alkaline Pretreatment of Algae Waste in the Production of Cellulosic Bioethanol

Biomass pretreatment has an important role in the production of cellulosic bioethanol. In this study, the effectiveness of microwave assisted alkaline pretreatment of algae waste was analysed. After pretreatment, the product was hydrolysed using sulphuric acid. The effects of microwave power, irradiating time, solid–liquid ratio and NaOH concentration were examined. Under the best conditions, the fermentable sugars were converted to cellulosic bioethanol using Saccharomyces Cerevisiae with a bioethanol yield of 1.93 ± 0.01 g/g and a fermentation efficiency of 40.4%. The reducing sugars concentration was 30% higher than that obtained from conventional hydrolysis without pretreatment. The obtained results suggest that microwave assisted alkaline pretreatment is effective in improving the production of cellulosic bioethanol of algae waste compared to that without microwave effect. Considering energy consumption, low microwave power and short microwave irradiation time are favourable for this pretreatment.

Potential applications of algae in biochemical and bioenergy sector

Algae have gained substantial importance as the most promising potential green fuel source across the globe and is on growing demand due to their antioxidant, anticancer, antiviral, antihypertensive, cholesterol reducing and thickening properties. Therefore, it has vast range of application in medicines, pharmaceutical, cosmetics, paper and nutraceutical industries. In this work, the remarkable ability of algae to convert CO₂ and other toxic compounds in atmosphere to potential biofuels, foods, feeds and high-value bioactive compounds is reviewed. Algae produce approximately 50% of the earth's oxygen using its photosynthetic activity, thus acting as a potent tool to mitigate the effects of air pollution. Further, the applicability of algae as a desirable energy source has also been discussed, as they have the potential to serve as an effective alternative to intermittent renewable energy; and also, to combustion-based fossil fuel energy, making them effective for advanced biofuel conversions. This work also evaluates the current applications of algae and the implications of it as a potential substrate for bioplastic, natural alternative to inks and for making paper besides high-value products. In addition, the scope for integrated biorefinery approach is also briefly explored in terms of economic aspects at the industrial scale, as such energy conversion mechanisms are directly linked with sustainability, thus providing a positive overall energy outlook.

Comparison of dilute acid pretreatment of agave assisted by microwave versus ultrasound to enhance enzymatic hydrolysis

A comparison between microwave and ultrasound irradiations in the agave pretreatment using dilute sulfuric acid as catalyst was assessed for the first time. Pretreatments were performed using a Taguchi Orthogonal Array L9 (3⁴) to improve the hemicellulose removal and the agave digestibility. The results showed that under optimal conditions, the hemicellulose removal was superior in the pretreatment assisted with microwave (77.5%) compared to ultrasound (28.2%). Enzymatic hydrolysis yield of agave pretreated with microwave (MW_OC) was 2-fold higher than agave pretreated with ultrasound (US_OC). The relatively mild conditions of pretreatment with MW_OC allowed to obtain a hydrolyzed free of inhibitors with a high glucose concentration (47.7 g/L) at low solids loading (10% w/v). However, these conditions did not have a significant effect over the agave pretreated with ultrasound. The pretreatment assisted with MW_OC allowed to reduce time and temperature of the process compared to pretreatment with conventional heating.