Facile synthesis of manganese oxide modified lignin nanocomposites from lignocellulosic biorefinery wastes for dye removal

Effective extraction of larch holocellulose with alkaline deep eutectic solvent and production of furan chemicals with the coordination of temperature-controlled polyoxometalates and metal salt in biphasic system

This study focused on extracting holocellulose from Changbai larch waste, which is rich in hexose and beneficial for furan chemicals production. Various alkaline deep eutectic solvents (DESs) was applied in the extraction of holocellulose. DES composed of lysine (Lys) and 2-aminoethanol (MEA) with strong alkalinity had a superior ability to remove lignin, and the purity of holocellulose could reach 82.7 %. Consequently, a double-acid system formed by a temperature-controlled polyoxometalates catalyst (ChnH3-nPW12, n = 1, 2, 3,) prepared by choline chloride (ChCl) and phosphotungstic acid (H3PW12O40) and different metal salts were used in the hydrolysis of holocellulose to 5-hydroxymethylfurfural (HMF) and 2-furaldehyde (FF) in a two-phase system of water and organic solvent. The yields of HMF and FF reached 43.5 % and 78.2 %, respectively, when ChH2PW12 and AlCl3 were employed under the conditions of 10 mL water/methyl isobutyl ketone (MIBK) (1:9, V:V), 9 h, and 150 °C. ChH2PW12is easy to recycle and can be used up to 5 times. This study offers a novel strategy to retain as much hemicellulose as possible to achieve holocellulose by alkaline DESs, and the one-pot process by the coordination of polyoxometalates and metal salt provides a simultaneous production of high-value furan chemicals from larch waste.

Synthesis of lignin nanoparticle‑manganese dioxide complex and its adsorption of methyl orange

Lignin nanoparticles (LNPs) were synthesized using an anti-solvent method and subsequently loaded with manganese dioxide (MnO2) via potassium permanganate treatment, resulting in the formation of MnO2@LNPs. An extensive investigation was conducted to elucidate the influence of MnO2@LNPs on the decolorization of methyl orange solution. The LNPs were successfully obtained by adjusting the preparation parameters, yielding particles exhibited average sizes ranging from 300 to 600 nm, and the synthesis process exhibited a high yield of up to 87.3% and excellent dispersion characteristics. Notably, LNPs size was reduced by decreasing initial concentration, increasing stirring rate, and adding water. In the acetone-water two-phase system, LNPs self-assembled into spherical particles driven by π-π interactions and hydrogen bond forces. Oxidation modification using potassium permanganate led to the formation of nanoscale MnO2, which effectively combined with LNPs. Remarkably, the resulting MnO2@LNPs demonstrated a two-fold increase in methyl orange adsorption capacity (227 mg/g) compared to unmodified LNPs. The process followed the Langmuir isotherm model and was exothermic.

Magnetic hydrochar derived from waste lignin for thallium removal from wastewater: Performance and mechanisms

Waste lignin, such as black liquor (BL) from paper and pulping industries, is an agro-industrial biowaste while its reuse raised global concerns. In this work, a hydrothermal carbonization procedure was employed to convert BL into magnetic lignin-based hydrochar (MLHC) for thallium elimination from wastewater. The results exhibited water purification potential due to a wider working pH window (2-9) with the magnetization intensity of 11.12 emu/g. The maximum adsorption capacity for Tl(III) was 278.9 mg/g, while the contribution of various mechanisms was elucidated with the order: surface precipitation (31.3 %), complexation (20.6 %), physical adsorption (18.2 %), chemical reduction (15.0 %), and ion exchange (14.9 %). This study revealed that hydrothermal treatment could be a potential and promising method to convert waste lignin into magnetic bio-adsorbent to recycle pulping black liquor and apply it for thallium pollution control.

Nanogreen is the new future: the conversion of lignin and lignocellulosic wastes into nanomaterials

The lignocellulose biorefinery industry has assumed an important role within the current scenario. Lignin is an abundant and available biopolymer and one of the compounds present in the lignocellulosic waste. Therefore, processing lignin into new materials and nanomaterials, such as nanolignin, has attracted the attention of the scientific community. Lignin nanoparticles are materials that have excellent properties, such as biodegradability and non-toxicity, and have great potential as chelating agents, antimicrobials agents, UV protectors, nanofillers, adsorbents, catalysts, supercapacitors, emulsion stabilizers, delivered systems, drugs, and gene carriers. This review article covers the emergent scenario of nanolignin and the main aspects of scientific interest, such as the conversion and functionalization of lignin, the valorization of lignocellulose waste, and nanoparticle synthesis. A techno-economic evaluation of the biorefinery model of the nanolignin synthesis is presented based on the simulation of the process on the experimental and commercial databases available and reported by some authors. Finally, the techno-economic assessment is complemented by the life cycle assessment of various nanolignin synthesis pathways reported to evaluate the environmental implications and support this emergent technology development.

A comprehensive review on sustainable greener nanoparticles for efficient dye degradation

The effluents released from textile industries mainly consist of dyes, metals and other pollutants. Dyes often are discharged in wastewater streams causing adverse effect on the environment. To eliminate these harmful dyes, various techniques are emerging out of which nanotechnology is the most reliable and safer. Nanotechnology offers convincing applications in case of environmental and economic concerns. The bio-synthesis of nanoparticles has several advantages over conventional methods and approach towards environment concern as well. Biological method of nanoparticles synthesis is concluded to be the most promising and efficient in action. Bio-synthesised nanoparticles could be used for treatment and decolourisation of dyes in an efficient manner. This review comprises the study of number of bio-synthesised nanoparticles utilised for degradation of various dyes present as pollutants in wastewater. Bio-synthesised nanoparticles such as gold, silver, iron, cobalt, zinc, titanium and molybdenum used for degradation of various dyes have been discussed in this review.

From residue to resource: new insights into the synthesis of functionalized lignin micro/nanospheres by self-assembly technology for waste resource utilization

Among the most abundant biopolymers in the biosphere, lignin is a renewable aromatic compound that represents an untapped opportunity to create new biological products. However, the complex interlacing structures of cellulose, hemicellulose and lignin, as well as the unique properties of lignin, limit the utilization of value-added lignin. Lignin-based nanomaterials open the door for lignin applications in environmental pollutant remediation, biofuel production, biomedicine, and other fields. Herein, we present various factors influencing the formation of micro-nanospheres by self-assembly techniques through a review of previous literature, and emphasize the simple and green synthesis of lignin micro/nanospheres (LMNPs) under non-modified conditions. More importantly, we discuss the mechanism of the formation of nanospheres. Considering the heterogeneity of lignin and the polarity of different solvents, we propose that self-assembly techniques should focus more on the influence brought by lignin itself or the solvent, so that the external conditions can be controlled to prepare LMNPs, which can be used in specific fields. A brief overview of the contribution of lignin-based nanomaterials in various fields is also presented. This review could provide insight for the development of lignin-based nanomaterials.

Coral-inspired environmental durability aerogels for micron-size plastic particles removal in the aquatic environment

Removing microplastics (MPs) from water has been a huge challenge due to their inherent features including small size and high stability. In this research, inspired by the active adsorption and passive adhesion mechanisms of corals to MPs, a new strategy to fabricate polydopamine enhanced magnetic chitosan (PDA-MCS) aerogels was developed with a target to match the surface properties of MPs, achieving high MPs removal efficiency. PDA-MCS aerogels were highly efficient in adsorbing polyethylene terephthalate (PET) microplastics in water at pH values of 6-9, with a removal efficiency of up to 91.6%. Even after three recycles, PDA-MCS aerogels still displayed comparatively high removal efficiency (83.4%). Kinetic and isothermal experiments showed that the adsorption process was the result of electrostatic interactions and physical adhesion between aerogels and microplastics. Moreover, PDA-MCS aerogels maintained high removal efficiency under simulated environmental conditions, and the removal efficiency of PET, polyethylene (PE) and polystyrene (PS) microplastics in waters reached 97.3%, 94.6%, and 92.3%, respectively. Therefore, high-efficiency environmentally durable aerogels adsorbent materials have the potential for the removal of MPs from the aquatic environment.

Detoxification of lignocellulosic prehydrolyzate by lignin nanoparticles prepared from biorefinery biowaste to improve the ethanol production

This study proposed a recyclable p-toluenesulfonic acid (p-TsOH) fractionation process for co-producing lignin nanoparticles (LNPs) and fermentable sugars from lignocellulosic biorefinery biowaste (enzymatic hydrolysis residue (EHR)). The prepared LNPs were used to detoxify the inhibitors in the xylose-rich prehydrolyzate for improving ethanol production. Results showed that the EHR was fractionated into a cellulose-rich water-insoluble solid (WIS) fraction and a lignin-rich spent liquor (SL) fraction. Cellulase hydrolysis of WIS produced 97.7% of glucose yield, while the LNPs of an average particle size of 98.0 nm with 76.3 % yield (based on the untreated EHR) were obtained from the diluted SL. LNPs demonstrated higher detoxification ability than EHR at the same dosage. Moreover, the fermentability of the detoxified xylose-rich prehydrolyzate was significantly improved. The sugar utilization ratio was 94.8%, and the ethanol yield reached its peak value of 85.4% after 36 h of fermenting the detoxified xylose-rich prehydrolyzate.

Biodegradable and re-usable sponge materials made from chitin for efficient removal of microplastics

Microplastics have attracted widespread attention due to their detrimental effects on organisms, and their efficient removal poses great challenges, especially those smaller than 3 µm that are more harmful for aquatic biota. Herein, the chitin based sponges with interconnected pores, excellent elasticity and mechanical durability were fabricated and composed with graphene oxide (GO) and oxygen-doped carbon nitride (O-C₃N₄). The chitin based sponges could effectively remove different functionalized microplastics (~1 µm) at pH 6-8, including carboxylate-modified polystyrene (PS-COOH), amine-modified polystyrene (PS-NH₂), and polystyrene (PS). Notably, the removal efficiency of three microplastics by the chitin based sponges reached up to 71.6-92.1% at an environmentally relevant concentration of 1 mg L^-1 in water system. The potential driving forces of the adsorption were electrostatic interactions, hydrogen bond interactions, and π-π interactions. In addition, the chitin based sponges are reusable and after re-used for 3 cycles due to their excellent compressibility. The algae toxicity test demonstrated good biocompatibility of the chitin based sponges and they are also biodegradable in a natural soil. This study provides a green and promising method for fabricating environmentally friendly adsorbents for small-size microplastics removal, and expands the insights into the mechanisms of microplastic adsorption onto the sponge materials.

Synthesis of a Lignin-Fe/Mn Binary Oxide Blend Nanocomposite and Its Adsorption Capacity for Methylene Blue

A high-performance modified lignin adsorbent was prepared through coprecipitation of ferrous, ferric, and permanganate with lignin in sodium hydroxide solution. The structural characteristics of the synthesized lignin-Fe/Mn binary oxide blend nanocomposite (L-F/M) and its performance on the methylene blue (MB) removal from aqueous solution were evaluated. Influence factors of adsorption effects were analyzed including pH, contact time, dye concentration, temperature, and thermodynamics. The pseudo-second-order kinetic model well described the adsorption kinetics, and the adsorption isotherms best fitted the Langmuir model with a maximum adsorption capacity of 252.05 mg g-1 at 298 K. The adsorption mechanism showed that the L-F/M introduced the metallic element and negative charges to the lignin surface, which improved the adherence of MB via hydrogen bonding, electrostatic interaction, and coordination. Moreover, the removal ratio of MB maintained 81.2% after being used in five adsorption-desorption cycles. Results indicated that the L-F/M obtained was an efficient candidate for dye wastewater treatment.