Performance of electro-Fenton process coupling with microbial fuel cell for simultaneous removal of herbicide mesotrione

Isolation, identification, and degradation mechanism by multi-omics of mesotrione-degrading Amycolatopsis nivea La24

Mesotrione is a herbicide used in agricultural production; however, its stability and long-term residues pose ecological risks to soil health and subsequent crops. In this research, the strain Amycolatopsis nivea La24 was identified as capable of completely degrading 50 mg∙L-1 mesotrione within 48 h. It exhibited a broad adaptability to various environment and could degrade three sulfonylurea herbicides (nicosulfuron, chlorimuron-methyl, and cinosulfuron). Non-target metabonomic and mass spectrometry demonstrated that La24 strain broke down the mesotrione parent molecule by targeting the β-diketone bond and nitro group, resulting in the production of five possible degradation products. The differentially expressed genes were significantly enriched in fatty acid degradation, amino acid metabolism, and other pathways, and the differentially metabolites in glutathione metabolism, arginine/proline metabolism, cysteine/methionine metabolism, and other pathways. Additionally, it was confirmed by heterologous expression that nitroreductase was directly involved in the mesotrione degradation, and NDMA-dependent methanol dehydrogenase would increase the resistance to mesotrione. Finally, the intracellular response of La24 during mesotrione degradation was proposed. This work provides insight for a comprehensive understanding of the mesotrione biodegradation mechanism, significantly expands the resources for pollutant degradation, and offers the potential for a more sustainable solution to address herbicide pollution in soil.

A critical review of approaches to enhance the performance of bio-electro-Fenton and photo-bio-electro-Fenton systems

The development of sustainable advanced energy conversion technologies and efficient pollutant treatment processes is a viable solution to the two global crises of the lack of non-renewable energy resources and environmental harm. In recent years, the interaction of biological and chemical oxidation units to utilize biomass has been extensively studied. Among these systems, bio-electro-Fenton (BEF) and photo-bio-electro-Fenton (PBEF) systems have shown prospects for application due to making rational and practical conversion and use of energy. This review compared and analyzed the electron transfer mechanisms in BEF and PBEF systems, and systematically summarized the techniques for enhancing system performance based on the generation, transfer, and utilization of electrons, including increasing the anode electron recovery efficiency, enhancing the generation of reactive oxygen species, and optimizing operational modes. This review compared the effects of different methods on the electron flow process and fully evaluated the benefits and drawbacks. This review may provide straightforward suggestions and methods to enhance the performance of BEF and PBEF systems and inspire the reader to explore the generation and utilization of sustainable energy more deeply.

Construction of Immobilized Laccase System Based on ZnO and Degradation of Mesotrione

Mesotrione (MES) is a new environmental pollutant. Some reports have indicated that microbial enzymes could be utilized for MES degradation. Laccase is a green biocatalyst whose potential use in environmental pollutant detoxification has been considered limited due to its poor stability and reusability. However, these issues may be addressed using enzyme immobilization. In the present study, we sought to optimize conditions for laccase immobilization, to analyze and characterize the characteristics of the immobilized laccase, and to compare its enzymatic properties to those of free laccase. In addition, we studied the ability of laccase to degrade MES, and analyzed the metabolic pathway of MES degradation by immobilized laccase. The results demonstrated that granular zinc oxide material (G-ZnO) was successfully used as the carrier for immobilization. G-ZnO@Lac demonstrated the highest recovery of enzyme activity and exhibited significantly improved stability compared with free laccase. Storage stability was also significantly improved, with the relative enzyme activity of G-ZnO@Lac remaining at about 54% after 28 days of storage (compared with only 12% for free laccase). The optimal conditions for the degradation of MES by G-ZnO@Lac were found to be 10 mg, 6 h, 30 °C, and pH 4; under these conditions, a degradation rate of 73.25% was attained. The findings of this study provide a theoretical reference for the laccase treatment of 4-hy-droxyphenylpyruvate dioxygenase (HPPD)-inhibiting herbicide contamination.

Integrated system of electro-catalytic oxidation and microbial fuel cells for the treatment of recalcitrant wastewater

The emission of recalcitrant wastewater poses serious threats to the environment. In this study, an integrated approach combining electrocatalytic oxidation (EC) for pretreatment and microbial fuel cells (MFC) for thorough pollutant degradation is proposed to ensure efficient degradation of target substances, with low energy input and enhanced bioavailability of refractory organics. When phenol was used as the pollutant, an initial concentration of 2000 mg/L phenol solution underwent EC treatment under constant current-exponential attenuation power supply mode, resulting in a COD removal rate of 54.53%, and a phenol degradation rate of 99.83%. Intermediate products such as hydroquinone and para-diphenol were detected in the solution. After subsequent MFC treatment, only minor amounts of para-diphenol were left, and the degradation rate of phenol and its intermediate products reached 100%, with an output power density of 110.4 mW m-2. When coal chemical wastewater was used as the pollutant, further examination of the EC-MFC system performance showed a COD removal rate of 49.23% in the EC section, and a 76.21% COD removal rate in the MFC section, with an output power density of 181.5 mW m-2. Microbiological analysis revealed typical electrogenic bacteria (such as Pseudomonas and Geobacter), and specific degrading functional bacteria (such as Stenotrophomonas, Delftia, and Brevundimonas). The dominant microbial communities and their proportions adapted to environmental changes in response to the variation of carbon sources.

A naked-eye visible aluminium (III)-based complex fluorescence sensor for sensitive detection of mesotrione

Mesotrione, which is a kind of herbicide to control broad-leaved weeds, has been increasingly used due to its excellent selectivity, rapid process and low toxicity. However, the excessive application of mesotrione have led to widespread contamination. Herein, a turn-on competitive coordination-based fluorescent probe, 2-hydroxy-1-(9-purin)-methylidenehydrazinenaphthalene (HPM), has been successfully synthesized. HPM could effectively detect Al3+ in CH3OH/HEPES (1/9, v/v) with low limit of detection (LOD) being 0.2 µM via coordination. HPM also exhibited excellent imaging capabilities for Al3+ in living cells with low cytotoxicity. On the basis of the competitive coordination of HPM with Al3+, the [HPM-Al3+] complex could also serve as a potential fluorescence sensor for detecting mesotrione with the LOD of 0.2 µM. Furthermore, [HPM-Al3+] complex was applied for the detection of mesotrione in real samples and test paper. Finally, the mechanism of [HPM-Al3+] for sensing mesotrione was investigated deeply as well. This work designed a new convenient method for on-site detection of mesotrione without the large-scale equipment or complicated pre-treatment.

The semen microbiome of miniature pony stallions

CONTEXT

Little is known about the microbial composition of stallion semen.

AIMS

To describe the microbiota detected in equine semen of healthy miniature pony stallions.

METHODS

Semen specimens were collected using a Missouri artificial vagina at a single time point. PacBio (Pacific Biosciences) genomic DNA sequencing of the 16S rRNA gene was performed on these specimens, following which next-generation microbiome bioinformatics platform QIIME2 was used to process fastq files and analyse the amplicon data. The data were categorised into genus, family, class, order and phylum.

KEY RESULTS

Firmicutes and Bacteroidetes phyla predominated (76%), followed by Proteobacteria (15%). Bacteroidales, Clostridiales and Cardiobacteriales predominated the microbial rank of order (86%). Class was mainly composed of Bacteroidia, Clostridia and Gammaproteobacteria (87%), while family was mainly composed of Porphyromonadaceae , Family_XI and Cardiobacteriaceae (62%). At the level of genus, 80% of the abundance was composed of seven genera, namely Porphyromonas, Suttonella, Peptoniphilus, Fastidiosipila, Ezakiella, Petrimonas and an unknown taxon.

CONCLUSIONS

The findings indicate that specific microbiota may be characteristic of healthy miniature pony stallions' semen with some inter-individual variations observed.

IMPLICATIONS

Larger equine studies involving fertile and infertile subjects could be informed by this study and could explore the relationship of the semen microbiome to male fertility.

Unraveling the contemporary use of microbial fuel cell in pesticide degradation and simultaneous electricity generation: a review

Pesticide is an inevitable substance used worldwide to kill pests, but their indiscriminate use has posed serious complications to health and the environment. Various physical, chemical, and biological methods are employed for pesticide treatment, but this paper deals with microbial fuel cell (MFC) as a futuristic technology for pesticide degradation with electricity production. In MFC, organic compounds are utilized as the carbon source for electricity production and the generation of electrons which can be replaced with pollutants such as dyes, antibiotics, and pesticides as carbon sources. However, MFC is been widely studied for a decade for electricity production, but its implementation in pesticide degradation is less known. We fill this void by depicting a real picture of the global pesticide scenario with an eagle eye view of the bioremediation techniques implemented for pesticide treatment with phytoremediation and rhizoremediation as effective techniques for efficient pesticide removal. The enormous literature survey has revealed that not many researchers have ventured into this new arena of MFC employed for pesticide degradation. Based on the Scopus database, an increase in annual trend from 2014 to 2023 is observed for MFC-implemented pesticide remediation. However, a novel MFC to date for effective remediation of pesticides with simultaneous electricity generation is discussed for the first time. Furthermore, the limitation of MFC technology and the implementation of MFC and rhizoremediation as a clubbed system which is the least applied can be seen as promising and futuristic approaches to enhance pesticide degradation by bacteria and electricity as a by-product.

Sense and Shoot: Unveiling the Electro-/Photocatalytic Potential of 2D White Graphene-Supported Perovskite Strontium Cobaltite from Detection to Remediation of Oxidative Stress Herbicide (Mesotrione)

In this research, we employed a strategy akin to "Feeding Two Birds with One Stone" aiming for the dual objectives of highly selective electrochemical detection and photocatalytic degradation of the environmentally hazardous herbicide mesotrione (MTN). We achieved this by utilizing hexagonal boron nitride (BN)-supported strontium cobaltite perovskite nanocomposites (SrCoO3/BN). The fabrication of the innovative bifunctional SrCoO3/BN nanocomposites involved a straightforward process of precipitation, followed by an annealing treatment and ultrasonication. The successful formation of these nanocomposites was corroborated through the application of diverse spectroscopic tools. Notably, as-prepared SrCoO3/BN nanocomposites exhibited a remarkable sensing platform for MTN, characterized by a notably low detection limit (11 nm), considerable sensitivity (3.782 μA μM-1 cm-2), and outstanding selectivity, alongside remarkable stability. Concurrently, these SrCoO3/BN nanocomposites demonstrated exceptional visible-light-driven photocatalytic efficacy for MTN degradation (99%) and complete mineralization. Our investigation systematically delved into the influence of operational parameters, including catalyst loading and the involvement of reactive oxidative species, in both the electrocatalytic and photocatalytic reactions. Drawing from these comprehensive studies, we have proposed plausible mechanisms for detecting and degrading MTN. Our findings pave the way for catalyst development, offering a unified solution for detecting and eliminating toxic organic compounds from the environment.

Insight into the Pseudocapacitive Behavior of Electroactive Biofilms in Response to Dynamic-Controlled Electron Transfer and Metabolism Kinetics for Current Generation in Water Treatment

Electroactive biofilms (EBs) engage in complex electron transfer and storage processes involving intracellular and extracellular mediators with temporary electron storage capabilities. Consequently, electroactive biofilms exhibit pseudocapacitive behaviors during substrate degradation processes. However, comprehensive systematic research in this area has been lacking. This study demonstrated that the pseudocapacitive property was an intrinsic characteristic of EBs. This property represents dynamic-controlled electron transfer and is critical in current generation, unlike noncapacitive responses. Nontransient charge and discharge experiments revealed a correlation between capacitive charge accumulation and current generation in EBs. Additionally, analysis of substrate degradation suggested that the maximum power density (Pmax) changed with the kinetic constants of COD degradation, with pseudocapacitances of EBs directly proportional to Pmax. The interaction networks of key latent variables were evaluated through partial least-squares path modeling analysis. The results indicated that cytochrome c was closely associated with the formation of pseudocapacitance in EBs. In conclusion, pseudocapacitance can be considered a valuable indicator for assessing the complex electron transfer behavior of EBs. Pseudocapacitive biofilms have the potential to efficiently regulate biological reactions and serve as a promising carbon-neutral and renewable strategy for energy generation and storage. An in-depth understanding of the intrinsic property of pseudocapacitive behavior in EBs can undoubtedly advance the development of this concept in the future.

Fate of pesticides in agricultural runoff treatment systems: Occurrence, impacts and technological progress

The levels of pesticides in air, water, and soil are gradually increasing due to its inappropriate management. In particular, agricultural runoff inflicts the damages on the ecosystem and human health at massive scale. Present study summarizes 70 studies in which investigations on removal or treatment of pesticides/insecticides/herbicides are reported. A bibliometric analysis was also done to understand the recent research trends through the analysis of 2218 publications. The specific objectives of this study are as follows: i) to inventorize the characteristics details of agriculture runoff and analyzing the occurrence and impacts of pesticides, ii) analyzing the role and interaction of pesticides in different environmental segments, iii) investigating the fate of pesticides in agriculture runoff treatment systems, iv) summarizing the experiences and findings of most commonly technology deployed for pesticides remediation in agriculture runoff including target pesticide(s), specifications, configuration of technological intervention. Among the reported technologies for pesticide treatment in agriculture runoff, constructed wetland was at the top followed by algal or photobioreactor. Among various advanced oxidation processes, photo Fenton method is mainly used for pesticides remediation such as triazine, methyl parathion, fenuron and diuron. Algal bioreactors are extensively used for a wide range of pesticides treatment including 2,4-Dichlorophenoxyacetic acid, 2-methyl-4-chlorophenoxyacetic acid, alachlor, diuron, chlorpyrifos, endosulfan, and imidacloprid; especially at lower hydraulic retention time of 2-6 h. This study highlights that hybrid approaches can offers potential opportunities for effective removal of pesticides in a more viable manner.

Profile and actual transmissibility of Carbapenem resistance genes: Intracellular and extracellular DNA in hospital wastewater

The current worldwide spread of carbapenem resistance genes (CRGs) has posed a major public health threat, which continues to grow in severity. Hospital wastewaters (HWWs) are major reservoirs for antibiotic resistance genes, while resistomes in HWWs are still poorly characterized when it comes to CRGs. We comprehensively characterized the profile and actual transmissibility of extracellular CRGs (eCRGs) and intracellular CRGs (iCRGs) in HWWs for the first time. In this study, CRGs showed similar relative abundance in treated and untreated HWWs. Meanwhile, HWWs treatments led to the enrichment of bla_IMP-8, probably attributed to the promotion of Novosphingobium and Prosthecobacter after treatment. To evaluate the transmission potential of CRGs, extracellular and intracellular carbapenem-resistant plasmids were captured from HWWs by transformation and conjugation, respectively. We found an interesting phenomenon regarding the transmission characteristics of CRGs: bla_KPC-carrying plasmids could only be captured by transformation, while bla_NDM-carrying plasmids were captured by conjugation. Further experiments showed that HWW treatments increased the conjugation ability of bla_NDM. In conclusion, our study demonstrated that HWWs are significant reservoirs of CRGs and various CRGs exhibit different modes of transmission in HWWs. CRGs cannot be removed by membrane bioreactor and chlorine disinfection. An urgent need is to develop more efficient wastewater treatments to limit CRG dissemination.

Iron cobalt-doped carbon nanofibers anode to simultaneously boost bioelectrocatalysis and direct electron transfer in microbial fuel cells: Characterization, performance, and mechanism

A self-supporting electrode (FeCo-MOF/CNFs) combining iron cobalt bimetallic metal-organic frameworks (FeCo-MOFs) with carbon nanofibers (CNFs) was applied as the anode of a microbial fuel cell (MFC). The introduction of FeCo-MOFs enhanced graphitization degree and electrical conductivity, which endowed FeCo-MOF/CNFs with excellent electrocatalytic performance and good biocompatibility. The hierarchical porous structure of FeCo-MOF/CNFs provided abundant attachment sites for electroactive bacteria (EAB) and facilitated rapid electron transfer. The MFC equipped with FeCo-MOF/CNFs anode (FeCo/CNFs-MFC) exhibited considerable power generation output (maximum power density: 5.3 ± 0.2 W/m², coulombic efficiency: 54 ± 4 %). In addition, FeCo/CNFs-MFC achieved a direct electron transfer (DET) catalytic current density of 0.63 A/m². FeCo-MOF/CNFs could simultaneously enhance the bioelectrocatalysis activity and promote the DET process of EAB, which provided an effective way to improve the sluggish extracellular electron transport process of the MFC anode.

Study on the performance and mechanism of bio-electrochemical system to mitigate membrane fouling in bioreactors

To alleviate membrane fouling, a membrane of the membrane bioreactor was directly used as the anode of the bio-electrochemical system. On the 14th day, the control group had blocked, while the experimental group with a current of 0.44 mA, the increase in ΔTMP was only 2.2 kPa. The polysaccharide and protein concentrations in the open-circuit group were 4.2 and 2.9 times higher than those in the closed-circuit group, respectively. Three-dimensional fluorescence spectroscopy and gas chromatography mass spectrometry showed that most of the deposition in the control group contained high-molecular-weight compounds, especially long-chain ester derivatives, phenols, and complex hydrocarbons, whereas the experimental group was the opposite. Therefore, current (electrons) can change the composition of the cake layer. High-throughput sequencing indicated that a significantly higher abundance of electroactive microorganisms on the experimental than control group. Two-dimensional correlation spectroscopy showed that electrons promote the degradation of polysaccharides, thereby alleviating membrane fouling.

Biocathode regulates enrofloxacin degradation by coupling with different co-metabolism conditions

In this study, biocathode system coupled with different co-metabolism conditions (NaAc, glucose and NaHCO₃) were developed to degrade quinolones enrofloxacin (ENR) due to its poorly metabolization, easily accumulation and potential toxicity. Simultaneously, ENR reduction kinetic rate constant in NaAc-fed, glucose-fed and NaHCO₃-fed biocathodes, and sole biocathode were increased by 343.62%, 320.46%, 189.19% and 130.88% when compared with that of abiotic cathode when the operational time and ENR concentration were set to 48 h and 25 mg/L. In addition, transformation pathways of ENR revealed pathway II were dominantly occurred in NaAc- and glucose-fed biocathode while pathway IV acting as key metabolic process were shown in NaHCO₃-fed biocathode. Moreover, 16S rRNA high-throughput sequencing analysis indicated that biocathodic communities were sensitive to switch-over of carbon source, namely Delftia and Bosea as organohalide-respiring bacteria (OHRB) were abundant in NaAc- and glucose-fed biocathodes while Mesotoga and Syntrophorhabdus that responsible for benzoyl-CoA metabolic process were enriched in NaHCO₃-fed biocathode. Overall, this study could unravel the underlying relationship between biocathode degradation pattern of ENR and different co-metabolism conditions, and further offer valuable scientific information on treating refractory quinolones antibiotics via green bioelectrochemical method.

Construction of a new type of three-dimensional honeycomb-structure anode in microbial electrochemical systems for energy harvesting and pollutant removal

Electrode materials occupy most of the construction cost of the microbial electrochemical system (MES), and the low mechanical strength and poor electrochemical performance of the commonly used traditional carbon-based materials restrict the promotion and application of this technology. In this study, polymer-based three-dimensional (3D) honeycomb-structure (HS) materials with good mechanical properties were used as supporting materials. Graphene (GR), carbon nanotube (CNT), and polypyrrole (PPy) was separately chosen as a surface conductivity coating layer for preparing MES anodes. The introduction of GR, CNT, and PPy on HS increased surface roughness, hydrophilicity, O and N content, electrochemically active surface area, and decreased charge transfer internal resistance, which promoted the adhesion of microorganisms on their surface and enhanced the extracellular electron transfer process at the electrode/microbe interface. The CNT-HS anode system got the better maximal power density (1700.7 ± 149.0 mW/m²) of the three modified anode systems and 3.60 times that of MES using CC (471.8 ± 27.2 mW/m²) as the anode. The accelerated reactions of the redox species in the outer cell membrane, the promoted electron shuttle secretion, and the enhanced abundance of the tricarboxylic acid cycle-related functional genes in biofilm led to better performance of the CNT-HS anode system. The CNT-HS anode system also exhibited long-term operational stability (>6 months) and a good chemical oxygen demand degradation effect. Furthermore, CNT-HS material exhibited its cost advantage, and its projected cost is estimated to be about $1.8/m², much lower than the currently used MES anodes ($8.2-548.2/m²). Considering the good mechanical properties, simple preparation process, low manufacturing cost, long-term stability, excellent bio-electrochemical performance, and good pollutant removal ability, HS-based anode has promising potential for high-performance MES in applications.

Improvement of zero waste sustainable recovery using microbial energy generation systems: A comprehensive review

Microbial energy generation systems, i.e., bioelectrochemical systems (BESs) are promising sustainable technologies that have been used in different fields of application such as biofuel production, biosensor, nutrient recovery, wastewater treatment, and heavy metals removal. However, BESs face great challenges such as large-scale application in real time, low power performance, and suitable materials for their configuration. This review paper aimed to discuss the use of BES systems such as conventional microbial fuel cells (MFCs), as well as plant microbial fuel cell (P-MFC), sediment microbial fuel cell (S-MFC), constructed wetland microbial fuel cell (CW-MFC), osmotic microbial fuel cell (OsMFC), photo-bioelectrochemical fuel cell (PBFC), and MFC-Fenton systems in the zero waste sustainable recovery process. Firstly, the configuration and electrode materials used in BESs as the main sources to improve the performance of these technologies are discussed. Additionally, zero waste recovery process from solid and wastewater feedstock, i.e., energy recovery: electricity generation (from 12 to 26,680 mW m^-2) and fuel generation, i.e., H₂ (170 ± 2.7 L^-1 L^-1 d^-1) and CH₄ (107.6 ± 3.2 mL^-1 g^-1), nutrient recovery of 100% (PO₄³-P), and 13-99% (NH₄⁺-N), heavy metal removal/recovery: water recovery, nitrate (100%), sulfate (53-99%), and sulfide recovery/removal (99%), antibiotic, dye removal, and other product recovery are critically analyzed in this review paper. Finally, the perspective and challenges, and future outlook are highlighted. There is no doubt that BES technologies are an economical option for the simultaneous zero waste elimination and energy recovery. However, more research is required to carry out the large-scale application of BES, as well as their commercialization.

Economic affordable carbonized phenolic foam anode with controlled structure for microbial fuel cells

In microbial fuel cells (MFCs), the anode electrode is a core structure as the catalytic area of exoelectrogens. The anode material for large-scale MFCs needs excellent bioelectrochemical performance and low fabrication costs. Herein, carbonized phenolic foam with controllable porous structures was developed as the bio-capacitor of MFCs. The proportion of sodium dodecylbenzene sulfonate (SDBS), which improved mixing and dissolution between the resin liquid and the foaming agent, was adjusted to form open pores on the foam film and skeletons, which promoted both the capacitance and biocompatibility of the anode. Within SDBS proportion from 0 to 1.2 wt%, the anode SPF-9 (0.9 wt%) obtained the best capacitance (37 ± 0.13 F g^-1), electrochemical active surface area (87 ± 0.38 cm²) and hydrophilia (contact angle 79 ± 0.2°). The MFCs with SPF-9 obtained the highest power density of 3980 ± 178 mW m^-2, while those of carbon-cloth anodes were 1600 ± 28 mW m^-2. The biofilm of SPF-9 also demonstrated higher activity and obtained larger abundance of exoelectrogens (68 ± 0.38%). The increased capacitance and biocompatibility mainly resulted in the good performance of SPF-9. The carbonized phenolic foam anode material was worth considering for the future application of MFCs due to its superior electrochemical performance and large-quantity fabrication capability.

Current advances in microbial fuel cell technology toward removal of organic contaminants - A review

At present, water pollution and demand for clean energy are most pressing global issues. On a daily basis, huge quantity of organic wastes gets released into the water ecosystems, causing health related problems. The need-of-the-hour is to utilize proficient and cheaper techniques for complete removal of harmful organic contaminants from water. In this regard, microbial fuel cell (MFC) has emerged as a promising technique, which can produce useful electrical energy from organic wastes and decontaminate polluted water. Herein, we have systematically reviewed recently published results, observations and progress made on the applications of MFCs in degradation of organic contaminants, including organic synthetic dyes, agro pollutants, health care contaminants and other organics (such as phenols and their derivatives, polyhydrocarbons and caffeine). MFC-based hybrid technologies, including MFC-constructed wetland, MFC-photocatalysis, MFC-catalysis, MFC-Fenton process, etc., developed to obtain high removal efficiency and bioelectricity production simultaneously have been discussed. Further, this review assessed the influence of factors, such as nature of electrode catalysts, organic pollutants, electrolyte, microbes and operational conditions, on the performance of pristine and hybrid MFC reactors in terms of pollutant removal efficiency and power generation simultaneously. Moreover, the limitations and future research directions of MFCs for wastewater treatment have been discussed. Finally, a conclusive summary of the findings has been outlined.

Persistent organic pollutants: The trade-off between potential risks and sustainable remediation methods

Persistent Organic Pollutants (POPs) have become a very serious issue for the environment because of their toxicity, resistance to conventional degradation mechanisms, and capacity to bioconcentrate, bioaccumulate and biomagnify. In this review article, the safety, regulatory, and remediation aspects of POPs including aromatic, chlorinated, pesticides, brominated, and fluorinated compounds, are discussed. Industrial and agricultural activities are identified as the main sources of these harmful chemicals, which are released to air, soil and water, impacting on social and economic development of society at a global scale. The main types of POPs are presented, illustrating their effects on wildlife and human beings, as well as the ways in which they contaminate the food chain. Some of the most promising and innovative technologies developed for the removal of POPs from water are discussed, contrasting their advantages and disadvantages with those of more conventional treatment processes. The promising methods presented in this work include bioremediation, advanced oxidation, ionizing radiation, and nanotechnology. Finally, some alternatives to define more efficient approaches to overcome the impacts that POPs cause in the hydric sources are pointed out. These alternatives include the formulation of policies, regulations and custom-made legislation for controlling the use of these pollutants.

Ni-Fe oxide-PEDOT modified anode coupled with BAF treating ammonia and nitrite in recirculating seawater of aquaculture system

Efficient ammonia and nitrite removal in low nutrient recirculating seawater of recirculating aquaculture system (RAS) is critical for healthy cultivation. However, it is hard for conventional biological aerated filters (BAFs) to meet this demand under short hydraulic retention time (HRT). The electrooxidation-BAFs (E-BAFs) were constructed for efficient seawater treatment in a RAS of Sebastes schlegelii, with high activity anodic catalyst Ni-Fe oxide-PEDOT. Satisfactory ammonia removal (88.2% in E-BAFs, 33.7% higher than the control, stage 3) and nitrite removal (69.9 % in E-BAFs, 45.3% in the control) were achieved at HRT of 50 min. The proportion of nitrifying bacteria (Nitrospira, Nitrosomonas and Nitrosopumilus) and nitrification/denitrification genes (amoCAB, nxrAB, narGHI, et. al) were higher in E-BAFs than the control, suggesting better potential in functional bacteria enrichment. Aerobic colony number in RAS with E-BAFs was lower and specific growth rate (SGR) of Sebastes schlegelii (3.79%) was significantly higher, indicating a better culture effect.

Plant microbial fuel cell: Opportunities, challenges, and prospects

Microbial fuel cells (MFCs) are considered as greener technologies for generation of bioenergy and simultaneously treatment of wastewater. However, the major drawback of these technologies was, rapid utilization of substrate by the microbes to generate power. This drawback is solved to a great extent by plant microbial fuel cell (PMFC) technology. Therefore, this review critically explored the challenges associated with PMFC technology and approaches to be employed for making it commercially feasible, started with brief introduction of MFCs, and PMFCs. This review also covered various factors like light intensity, carbon dioxide concentration in air, type of plant used, microbial flora in rhizosphere and also electrode material used which influence the efficiency of PMFC. Finally, this review comprehensively revealed the possibility of future intervention, such as application of biochar and preferable plants species which improve the performance of PMFC along with their opportunities challenges and prospects.

"Self-degradation" of 2-chlorophenol in a sequential cathode-anode cascade mode bioelectrochemical system

A sequential cathode-anode cascade mode bioelectrochemical system (BES) was designed and developed to achieve the "self-degradation" of 2-chlorophenol (2-CP). With the cooperation of cathode and anode, the electrons supplied for the cathode 2-CP dechlorination come from its own dechlorinated product in the anode, phenol. Separate degradation experiments of cathode 2-CP and anode phenol were firstly conducted. The optimum concentration ratio of anode acetate to phenolic compound (3.66/1.56) and the phenolic compound degradation ability of BES were investigated. With the formation of the bioanode able to degrade phenol, the sequential cathode-anode cascade mode BES was further developed, where 2-CP could achieve sequential dechlorination and ring-cleavage degradation. When applied voltage was 0.6 V and cathode influent pH was 7, 1.56 mM 2-CP reached 80.15% cathode dechlorination efficiency and 58.91% total cathode-anode phenolic compounds degradation efficiency. The bioanodes played a decisive role in BES. Different operating conditions would affect the overall performance of BES by changing the electrochemical activity and microbial community structure of the bioanodes. This study demonstrated the feasibility of the sequential cathode-anode cascade mode BES to degrade 2-CP wastewater and provided perspectives for the cooperation of cathode and anode, aiming to explore more potential of BES in wastewater treatment field.

Efficient degradation of refractory pollutant in a microbial fuel cell with novel hybrid photocatalytic air-cathode: Intimate coupling of microbial and photocatalytic processes

A microbial fuel cell-photocatalysis system with a novel photocatalytic air-cathode (MFC-PhotoCat) was proposed for synergistic degradation of 2,4,6-trichlorophenol (TCP) with simultaneous electricity generation. Stable electricity generation of 350 mV was achieved during 130 days of operation. Besides, 50 mg L^-1 TCP was completely degraded within 72 h, and the rate constant of 0.050 h^-1 was 1.8-fold higher than MFC with air-cathode without N-TiO₂ photocatalyst. Degradation pathway was proposed based on the intermediates detected and density functional theory (DFT) calculation, with two open-chain intermediates (2-chloro-4-keto-2-hexenedioic acid and hexanoic acid) detected. Furthermore, hierarchical cluster and PCoA revealed significant shifts of microbial community structures, with enriched exoelectrogen (55.2% of Geobacter) and TCP-degrading microbe (7.1% of Thauera) on the cathode biofilm as well as 61.8% of Pseudomonas in the culture solution. This study provides a promising strategy for synergic degradation of recalcitrant contaminants by intimate-coupling of MFC and photocatalysis.

Role of bioelectrochemical systems for the remediation of emerging contaminants from wastewater: A review

Bioelectrochemical systems (BESs) are a unique group of wastewater remediating technology that possesses the added advantage of valuable recovery with concomitant wastewater treatment. Moreover, due to the application of robust microbial biocatalysts in BESs, effective removal of emerging contaminants (ECs) can be accomplished in these BESs. Thus, this review emphasizes the recent demonstrations pertaining to the removal of complex organic pollutants of emerging concern present in wastewater through BES. Owing to the recalcitrant nature of these pollutants, they are not effectively removed through conventional wastewater treatment systems and thereby are discharged into the environment without proper treatment. Application of BES in terms of ECs removal and degradation mechanism along with valuables that can be recovered are discussed. Moreover, the factors affecting the performance of BES, like biocatalyst, substrate, salinity, and applied potential are also summarized. In addition, the present review also elucidates the occurrence and toxic nature of ECs as well as future recommendations pertaining to the commercialization of this BES technology for the removal of ECs from wastewater. Therefore, the present review intends to aid the researchers in developing more efficient BESs for the removal of ECs from wastewater.

Rechargeable microbial fuel cell based on bidirectional extracellular electron transfer

Rechargeable microbial electrochemical systems can be used as renewable energy storage systems or as potable bioelectronics devices. In this study, a bioelectrode capable of bidirectional extracellular electron transfer was firstly introduced to construct the rechargeable microbial fuel cell (MFC). The performance of rechargeable MFC was enhanced with the increase of charge/discharge cycles, and a maximum energy efficiency of 4.5 ± 0.2% and Coulombic efficiency of 29.4 ± 4.1% were obtained. H₂ was the main charge carrier, while the accumulated acetate was only about 10 mg L^-1. The charge time under constant current mode largely affected the energy recovery. A decreased abundance of Mycobacteria, Geobacter, and Azospirillum, accompanied by an increase of Azonexus and Rhodococcus was observed in the rechargeable MFC, compared to control tests fueled with acetate. This study demonstrates the potential of bioelectrode for energy storage and recovery.