Newly isolated Bacillus sp. PS-6 assisted phytoremediation of heavy metals using Phragmites communis: Potential application in wastewater treatment

Enhancing remediation efficiency of cadmium-contaminated soil: integrating forage-microorganism systems with agronomic strategies

Soil contamination due to heavy metals, especially cadmium (Cd), poses a growing concern. This study seeks to develop an economical and non-polluting sustainable remediation program for Cd-contaminated soil to address this issue. This study pioneered the exploration of Cd accumulation patterns in three forage species: Lolium multiflorum Lamk (LMJS), Sorghum bicolor × sudanense (SSBJ), and Sorghum sudanense (Piper) Stapf (SUJS) to identify their optimal harvest periods in Cd-contaminated soils. Additionally, a consortium of beneficial microorganisms (combinations of C, F, and H; C: 10% Bacillus subtilis; F: 20% Bacillus subtilis + 10% Bacillus cereus + 20% Citrobacter; H: 20% Deinococcus radiodurans + 10% Bacillus cereus) was implemented, with a focus on developing an efficient forage-microbial co-remediation system. Subsequently, agronomic strategies (mowing or chelating agents) were employed to improve the Cd enrichment capacity of the combined forage-microbe remediation system, offering sustainable field remediation strategies. The results indicate that the SSBJ + F combined remediation system was mowed on the 60th day (stubble left at 35 cm, light mowing) and harvested on the 120th day as the optimal choice. The bioaccumulation quantity (BCQ) unit accumulation in Cd-contaminated soil at a concentration of 10 mg/kg reached 0.397 mg/kg, and the annual Cd removal rate was 9.23%, representing a 29.63% increase compared to the control group. The results of this study provide valuable insights into the development of practical, field-applicable remedial measures for cadmium-contaminated soils while minimizing environmental impacts.

Microbe-assisted phytoremediation for sustainable management of heavy metal in wastewater - A green approach to escalate the remediation of heavy metals

Water pollution from Heavy metal (HM) contamination poses a critical threat to environmental sustainability and public health. Industrial activities have increased the presence of HMs in wastewater, necessitating effective remediation strategies. Conventional methods like chemical precipitation, ion exchange, adsorption, and membrane filtration are widely used but possess various limitations. These include high costs, environmental impacts, and the potential for generating secondary pollutants, highlighting the need for sustainable alternatives. Phytoremediation, enhanced by microbial interactions, offers an eco-friendly solution to this issue. The unique physiological and biochemical traits of plants, combined with microbial metabolic capabilities, enable efficient uptake and detoxification of HMs. Microbial enzymes play a crucial role in these processes by breaking down complex compounds, enhancing HM bioavailability, and facilitating their conversion into less toxic forms. Synergistic interactions between root-associated microbes and plants further improves metal absorption and stabilization, boosting phytoremediation efficiency. However, challenges remain, including the limited bioavailability of contaminants and plant resilience in highly polluted environments. Recent advancements focus on improving microbial-assisted phytoremediation through mechanisms like bioavailability facilitation, phytoextraction, and phytostabilization. Genetic engineering facilitates the altering of genes that control plant immune responses and growth which improves the ability of plants to interact beneficially with microbes to thrive in HM rich environments while efficiently cleaning contaminated wastewater. This review examines these strategies and highlights future research directions to enhance wastewater remediation using phytoremediation technologies.

Recent and sustainable advances in phytoremediation of heavy metals from wastewater using aquatic plant species: Green approach

A key component in a nation's economic progress is industrialization, however, hazardous heavy metals that are detrimental to living things are typically present in the wastewater produced from various industries. Therefore, before wastewater is released into the environment, it must be treated to reduce the concentrations of the various heavy metals to maximum acceptable levels. Even though several biological, physical, and chemical remediation techniques are found to be efficient for the removal of heavy metals from wastewater, these techniques are costly and create more toxic secondary pollutants. However, phytoremediation is inexpensive, environmentally friendly, and simple to be applied as a green technology for heavy metal detoxification in wastewater. The present study provides a thorough comprehensive review of the mechanisms of phytoremediation, with an emphasis on the possible utilization of plant species for the treatment of wastewater containing heavy metals. We have discussed the concept, its applications, advantages, challenges, and independent variables that determine how successful and efficient phytoremediation could be in the decontamination of heavy metals from wastewater. Additionally, we argue that the standards for choosing aquatic plant species for target heavy metal removal ought to be taken into account, as they influence various aspects of phytoremediation efficiency. Following the comprehensive and critical analysis of relevant literature, aquatic plant species are promising for sustainable remediation of heavy metals. However, several knowledge gaps identified from the review need to be taken into consideration and possibly addressed. Therefore, the review provides perspectives that indicate research needs and future directions on the application of plant species in heavy metal remediation.

Assessment of heavy metal pollution in soil-parent material relationship across ecosystems

The works of assessing the pollution posed by metals in agricultural areas in developing countries are limited. This study aims to assess metal concentrations and pollution indices of parent materials and soils representing the mantle and oceanic crust units of the ophiolite in the Eastern Mediterranean region, specifically in Kahramanmaraş Province. A total of 88 samples, comprising 44 soil (0-30 cm) and 44 parent material (90 + cm), were collected from the study area. Arsenic (As), mercury (Hg), selenium (Se), uranium (U), molybdenum (Mo), tin (Sn), and cesium (Cs) concentrations were analyzed in these samples, along with the reference metal, iron (Fe). Pollution levels were assessed using enrichment factor (EF) and contamination factor (CF) calculations. Results showed that elemental concentrations (Hg, Se, U, Mo, Sn, and Cs) in soils from the mantle and oceanic crust generally reflected those of the parent material. However, the average As concentration in soils from oceanic crust and mantle units was notably elevated, showing a 3 to fourfold increase compared to the parent material. Based on pollution index values, soils from these units demonstrated a moderate level of enrichment (2 < EF < 5) for As, while other elements (Hg, Se, U, Mo, Sn, and Cs) fell into the low enrichment class (EF < 2). Furthermore, the CF index indicated significant contamination (3 < CF < 6) for As. These findings suggest As contamination in soils from different units of the ophiolite (mantle and oceanic crust), potentially resulting from agricultural chemicals like pesticides and fertilizers.

Non-phytoremediation and phytoremediation technologies of integrated remediation for water and soil heavy metal pollution: A comprehensive review

Since the 1980s, there has been increasing concern over heavy metal pollution remediation. However, most research focused on the individual remediation technologies for heavy metal pollutants in either soil or water. Considering the potential migration of these pollutants, it is necessary to explore effective integrated remediation technologies for soil and water heavy metals. This review thoroughly examines non-phytoremediation technologies likes physical, chemical, and microbial remediation, as well as green remediation approaches involving terrestrial and aquatic phytoremediation. Non-phytoremediation technologies suffer from disadvantages like high costs, secondary pollution risks, and susceptibility to environmental factors. Conversely, phytoremediation technologies have gained significant attention due to their sustainable and environmentally friendly nature. Enhancements through chelating agents, biochar, microorganisms, and genetic engineering have demonstrated improved phytoremediation remediation efficiency. However, it is essential to address the environmental and ecological risks that may arise from the prolonged utilization of these materials and technologies. Lastly, this paper presents an overview of integrated remediation approaches for addressing heavy metal contamination in groundwater-soil-surface water systems and discusses the reasons for the research gaps and future directions. This paper offers valuable insights for comprehensive solutions to heavy metal pollution in water and soil, promoting integrated remediation and sustainable development.

Phytoremediation of Hg and chlorpyrifos contaminated soils using Phaseolus vulgaris L. with biochar, mycorrhizae, and compost amendments

Anthropogenic activities, encompassing vast agricultural and industrial operations around the world, exert substantial pressure on the environment, culminating in profound ecological impacts. These activities exacerbate soil contamination problems with pollutants such as mercury (Hg) and chlorpyrifos (CPF) that are notable for their widespread presence and detrimental effects. The objective of this study is to evaluate the phytoremediation potential of Phaseolus vulgaris L., augmented with various combinations of biochar, mycorrhizal, and compost amendments, as a sustainable alternative for the remediation of soils contaminated with Hg and CPF. For this purpose, soil from a mining area with mercury contamination has been taken, to which CPF has been added in different concentrations. Then, previously germinated Phaseolus vulgaris L. seedlings with an average height of 10 cm were planted. Electrical conductivity, pH, organic matter, CPF, and Hg, as well as seedling growth parameters, have been evaluated to determine the processes of absorption of soil contaminants into the plant. A combination of biochar with mycorrhiza has been found to be an optimal choice for CPF and Hg remediation. However, all amendments have proven to be efficient in the remediation processes of the tested contaminants.

Siderophores and metallophores: Metal complexation weapons to fight environmental pollution

Siderophores are small molecules of organic nature, released by bacteria to chelate iron from the surrounding environment and subsequently incorporate it into the cytoplasm. In addition to iron, these secondary metabolites can complex with a wide variety of metals, which is why they are commonly studied in the environment. Heavy metals can be very toxic when present in large amounts on the planet, affecting public health and all living organisms. The pollution caused by these toxic metals is increasing, and therefore it is urgent to find practical, sustainable, and economical solutions for remediation. One of the strategies is siderophore-assisted bioremediation, an innovative and advantageous alternative for various environmental applications. This research highlights the various uses of siderophores and metallophores in the environment, underscoring their significance to ecosystems. The study delves into the utilization of siderophores and metallophores in both marine and terrestrial settings (e.g. bioremediation, biocontrol of pathogens, and plant growth promotion), such as bioremediation, biocontrol of pathogens, and plant growth promotion, providing context for the different instances outlined in the existing literature and highlighting their relevance in each field. The study delves into the structures and types of siderophores focusing on their singular characteristics for each application and methodologies used. Focusing on recent developments over the last two decades, the opportunities and challenges associated with siderophores and metallophores applications in the environment were mapped to arm researchers in the fight against environmental pollution.

Sustainable approaches for removing toxic heavy metal from contaminated water: A comprehensive review of bioremediation and biosorption techniques

In this comprehensive study, highlights emerging environmentally friendly methods to eliminating hazardous heavy metals from contaminated water, with an emphasis on bioremediation and biosorption. Breakthroughs, such as the combination of biological remediation and nanotechnology to improve the elimination of metals effectiveness and the use of genetically modified microbes for targeted pollutant breakdown. Developing biosorption materials made from agricultural waste and biochar, this indicates interesting areas for future research and emphasizes the necessity of sustainable practices in tackling heavy metal contamination in water systems. There seems to be a surge in enthusiasm for the utilization of biological remediation and biosorption methods as sustainable and viable options for eliminating heavy metals from contaminated water in the past couple of decades. The present review intends to offer an in-depth review of the latest understanding and advances in the discipline of biological remediation methods like bioaccumulation, biofiltration, bio-slurping, and bio-venting. Biosorption is specifically explained and includes waste biomass as biosorbent with the removal mechanisms and the hindrances caused in the process are detailed. Advances in biosorption like microbes as biosorbents and the mechanism involved in it. Additionally, novel enhancement techniques like immobilization, genetic modification, and ultrasound-assisted treatment in microbial sorbent are clarified. However, the review extended with analyzing the future advances in the overall biological methods and consequences of heavy metal pollution.

Microbiological Mechanisms of Collaborative Remediation of Cadmium-Contaminated Soil with Bacillus cereus and Lawn Plants

Severe cadmium contamination poses a serious threat to food security and human health. Plant-microbial combined remediation represents a potential technique for reducing heavy metals in soil. The main objective of this study is to explore the remediation mechanism of cadmium-contaminated soil using a combined approach of lawn plants and microbes. The target bacterium Bacillus cereus was selected from cadmium-contaminated soil in mining areas, and two lawn plants (Festuca arundinacea A'rid III' and Poa pratensis M'idnight II') were chosen as the target plants. We investigated the remediation effect of different concentrations of bacterial solution on cadmium-contaminated soil using two lawn plants through pot experiments, as well as the impact on the soil microbial community structure. The results demonstrate that Bacillus cereus promotes plant growth, and the combined action of lawn plants and Bacillus cereus improves soil quality, enhancing the bioavailability of cadmium in the soil. At a bacterial suspension concentration of 105 CFU/mL, the optimal remediation treatment was observed. The removal efficiency of cadmium in the soil under Festuca arundinacea and Poa pratensis treatments reached 33.69% and 33.33%, respectively. Additionally, the content of bioavailable cadmium in the rhizosphere soil increased by up to 13.43% and 26.54%, respectively. Bacillus cereus increased the bacterial diversity in the non-rhizosphere soil of both lawn plants but reduced it in the rhizosphere soil. Additionally, the relative abundance of Actinobacteriota and Firmicutes, which have potential for heavy metal remediation, increased after the application of the bacterial solution. This study demonstrates that Bacillus cereus can enhance the potential of lawn plants to remediate cadmium-contaminated soil and reshape the microbial communities in both rhizosphere and non-rhizosphere soils.

Performance of vertical flow constructed wetland for the treatment of effluent from a brassware industry in city of Fez, Morocco: a laboratory scale study

Brassware industry constitutes the second most polluting industrial sector in Fez city, Morocco, owing to its high heavy metal load. The aim of this study is to examine and evaluate the performance of vertical flow constructed wetlands in treating brassware effluents using various plant species. Ten treatment systems were planted with four types of plants: Chrysopogon zizanioides, Typha latifolia, Phragmites australis, and Vitex agnus-castus, while another system remained unplanted. These systems underwent evaluation by measuring various parameters, including pH, electrical conductivity, suspended solids, chemical oxygen demand, biological oxygen demand, sulfates, orthophosphates, total Kjeldhal nitrogen, ammonium, nitrates, nitrites, and heavy metals such as silver, copper, and nickel, using standard methods over of ten weeks. The results obtained demonstrate effectiveness of these systems. When planted with Ch. zizanioides, the systems achieved elimination rates of 83.64%, 98.55%, 91.48%, 86.82%, 80.31%, 96.54%, 98%, and 98.82% for suspended solids, ammonium, nitrites, BOD5, sulfates, orthophosphates, silver, and nickel, respectively. System with V. agnus-castus showed significant reductions in nitrate and copper, with rates of 84.48% and 99.10%, respectively. Considerable decrease in pH and electrical conductivity values was observed in all systems, with a notable difference between planted and control systems regarding effectiveness of treatment for other parameters.

A Review about the Mycoremediation of Soil Impacted by War-like Activities: Challenges and Gaps

(1) Background: The frequency and intensity of war-like activities (war, military training, and shooting ranges) worldwide cause soil pollution by metals, metalloids, explosives, radionuclides, and herbicides. Despite this environmentally worrying scenario, soil decontamination in former war zones almost always involves incineration. Nevertheless, this practice is expensive, and its efficiency is suitable only for organic pollutants. Therefore, treating soils polluted by wars requires efficient and economically viable alternatives. In this sense, this manuscript reviews the status and knowledge gaps of mycoremediation. (2) Methods: The literature review consisted of searches on ScienceDirect and Web of Science for articles (1980 to 2023) on the mycoremediation of soils containing pollutants derived from war-like activities. (3) Results: This review highlighted that mycoremediation has many successful applications for removing all pollutants of war-like activities. However, the mycoremediation of soils in former war zones and those impacted by military training and shooting ranges is still very incipient, with most applications emphasizing explosives. (4) Conclusion: The mycoremediation of soils from conflict zones is an entirely open field of research, and the main challenge is to optimize experimental conditions on a field scale.

Heavy metal-tolerant bacteria Bacillus cereus BCS1 degrades pyrethroid in a soil-plant system

The heightened concern about the environmental impacts of pollutants drives interest in reducing their threats to humans and the environment. Bioremediating polluted sites under environmental stresses like biotic and abiotic poses significant challenges. This study aimed to isolate a bacterium that effectively degrades pyrethroids even under abiotic stresses involving heavy metals and biotic stresses with autochthonous factors. Here, a bacterial strain, Bacillus cereus BCS1 was isolated. The response surface methodology was established to quantify the environmental impacts on pyrethroid degradation. BCS1 effectively degraded pyrethroids across conditions at 21-36 °C, pH 6.5-8.0 and inoculum sizes 1.9-4.1 mg·L-1, exceeding 90% degradation. Notably, over 84% of β-cypermethrin (β-CP) was degraded even when exposed to various concentrations of lead (10-1000 mg·L-1), chromium (10-1000 mg·L-1), or cadmium (0.5-50 mg·L-1). Moreover, BCS1 significantly accelerated β-CP degradation in soil-plant systems, displaying biotic stress tolerance, with lower half-life values (10.1 and 9.5 d) in soil and higher removal (92.1% and 60.9%) in plants compared to controls (27.7 and 25.7 d), and (18.2% and 24.3%). This study presents a novel strain capable of efficiently degrading pyrethroids and displaying remarkable environmental stress resistance. Findings shed light on bioremediating organic pollutants in complex soil ecosystems.

Emerging micropollutants in aquatic ecosystems and nanotechnology-based removal alternatives: A review

There is a significant concern about the accessibility of uncontaminated and safe drinking water, a fundamental necessity for human beings. This concern is attributed to the toxic micropollutants from several emission sources, including industrial toxins, agricultural runoff, wastewater discharges, sewer overflows, landfills, algal blooms and microbiota. Emerging micropollutants (EMs) encompass a broad spectrum of compounds, including pharmaceutically active chemicals, personal care products, pesticides, industrial chemicals, steroid hormones, toxic nanomaterials, microplastics, heavy metals, and microorganisms. The pervasive and enduring nature of EMs has resulted in a detrimental impact on global urban water systems. Of late, these contaminants are receiving more attention due to their inherent potential to generate environmental toxicity and adverse health effects on humans and aquatic life. Although little progress has been made in discovering removal methodologies for EMs, a basic categorization procedure is required to identify and restrict the EMs to tackle the problem of these emerging contaminants. The present review paper provides a crude classification of EMs and their associated negative impact on aquatic life. Furthermore, it delves into various nanotechnology-based approaches as effective solutions to address the challenge of removing EMs from water, thereby ensuring potable drinking water. To conclude, this review paper addresses the challenges associated with the commercialization of nanomaterial, such as toxicity, high cost, inadequate government policies, and incompatibility with the present water purification system and recommends crucial directions for further research that should be pursued.

Recent trends in polycyclic aromatic hydrocarbons pollution distribution and counteracting bio-remediation strategies

Polycyclic aromatic hydrocarbons (PAHs) are distributed worldwide due to long-term anthropogenic pollution sources. PAHs are recalcitrant and highly persistent in the environment due to their inherent properties, such as heterocyclic aromatic ring structures, thermostability, and hydrophobicity. They are highly toxic, carcinogenic, immunotoxic, teratogenic, and mutagenic to various life systems. This review focuses on the unique data of PAH sources, exposure routes, detection techniques, and harmful effects on the environment and human health. This review provides a comprehensive and systematic compilation of eco-friendly biological treatment solutions for PAH remediation, such as microbial remediation approaches utilizing microbial cultures. In situ and Ex situ bioremediation of PAH methods, including composting land farming, biopiles, bioreactors bioaugmentation, and phytoremediation processes, are discussed in detail, as is a summary of the factors affecting and limiting PAH bioremediation. This review provides an overview of emerging technologies that use multi-process combinatorial treatment approaches and answers to generating value-added by-products during PAH remediation.

Microorganisms and Biochar Improve the Remediation Efficiency of Paspalum vaginatum and Pennisetum alopecuroides on Cadmium-Contaminated Soil

Phytoremediation can help remediate potential toxic elements (PTE) in soil. Microorganisms and soil amendments are effective means to improve the efficiency of phytoremediation. This study selected three microorganisms that may promote phytoremediation, including bacteria (Ceratobasidium), fungi (Pseudomonas mendocina), and arbuscular-mycorrhizal fungi (AMF, Funneliformis caledonium). The effects of single or mixed inoculation of three microorganisms on the phytoremediation efficiency of Paspalum vaginatum and Pennisetum alopecuroides were tested under three different degrees of cadmium-contaminated soil (low 10 mg/kg, medium 50 mg/kg, and high 100 mg/kg). The results showed that single inoculation of AMF or Pseudomonas mendocina could significantly increase the biomass of two plants under three different degrees of cadmium-contaminated soil, and the growth-promoting effect of AMF was better than Pseudomonas mendocina. However, simultaneous inoculation of these two microorganisms did not show a better effect than the inoculation of one. Inoculation of Ceratobasidium reduced the biomass of the two plants under high concentrations of cadmium-contaminated soil. Among all treatments, the remediation ability of the two plants was the strongest when inoculated with AMF alone. On this basis, this study explored the effect of AMF combined with corn-straw-biochar on the phytoremediation efficiency of Paspalum vaginatum and Pennisetum alopecuroides. The results showed that biochar could affect plant biomass and Cd concentration in plants by reducing Cd concentration in soil. The combined use of biochar and AMF increased the biomass of Paspalum vaginatum by 8.9-48.6% and the biomass of Pennisetum alopecuroides by 8.04-32.92%. Compared with the single use of AMF or biochar, the combination of the two is better, which greatly improves the efficiency of phytoremediation.

Evaluation of phytoremediation potential and resistance of Gladiolus grandiflora L. against cadmium stress

Although irrigation water is a fundamental need for plant growth, it is also a source of pollutants if contaminated with harmful materials like cadmium (Cd). Irrigation water possessing abundant Cd causes damage to soil, plants, animals and ultimately human beings through the food chain. A pot experiment was conducted to evaluate the gladiolus (Gladiolus grandiflora L.) potential of Cd accumulation and the capability of the plant to be an economically beneficial choice in presence of high Cd irrigation water supply. Artificially prepared four levels of Cd irrigation water were applied to the plants viz., 30, 60, 90 and 120 mg L^-1. The results revealed that 30 mg L^-1 Cd had no difference in all growth-related parameters when compared to the control. Photosynthesis rate, stomatal conductance and transpiration rate along with plant height and spike length were reduced with high accumulation levels of Cd in plants. The main plant portion for Cd storage found in Gladiolus grandiflora L was corm where the amount of Cd was 10-12 times higher than the amount found in leaves, and 2-4 times more than the stem. This deportment was further established by the translocation factor (TF). In corm to shoot TF and corm to stem TF, the factor reduced with increasing Cd levels, while, in corm to leaves TF, Cd levels were statistically non-significant. From corm to shoot TF value of 0.68 and 0.43 in case of 30 and 60 mg L^-1, Cd treatments indicates good phytoremediation potential of Gladiolus in low and moderate Cd-polluted environments. Conclusively, the study reveals the good capability of Gladiolus grandiflora L. to harvest Cd from the soil and water in reasonably good amount with sufficient potential to grow under irrigation-based Cd stress. Under revelations of the study, Gladiolus grandiflora L appeared as a Cd accumulator which could potentially be used as a sustainable approach for phytoremediation of Cd.

Acinetobacter schindleri SR-5-1 decipher morpho-physio-biochemical and nutritional improvements to Pisum sativum L. and Linum usitatissimum L. maintained under wastewater/cadmium stress

Metal retention in wastewater fertigated crops poses a potential hazard to food chain. Current work demonstrates the bioremediation and growth-promoting potential of Acinetobacter schindleri SR-5-1 by using nitrogen-fixing (pea) and non-nitrogen fixing (linseed) plants under cadmium (Cd) and wastewater irrigation regimes. Both plants were grown at 250 or 500 CdCl2 and 75 or 100% wastewater, each separately with and without A. schindleri SR-5-1 inoculation. The results revealed that Cd and wastewater significantly decreased growth, biomass, antioxidants, and nutrient acquisition through increased malondialdehyde, H2O2, and Cd accumulation. However, application of A. schindleri SR-5-1 significantly promoted morpho-physio-biochemical attributes while diminishing MDA and H2O2 under applied Cd and wastewater stress levels in both pea and linseed. Further, PGPR inoculation positively influenced pea and linseed seedlings through a substantial decline in Cd accumulation in roots/shoots and retained the optimal level of essential nutrients. It was inferred that both pea and linseed, with A. schindleri SR-5-1 application, exhibited higher growth and metabolism under Cd and wastewater stress but substantial tolerance was acquired under wastewater stress. Studied plants exhibited tolerance in order of 75% WW ≥ 250 µM Cd ≥ 100%WW ≥ 500 µM Cd treatment under A. schindleri inoculation. Current findings revealed the potential of A. schindleri to be exploited both for bioremediation and bio-fertilization under Cd, and wastewater-polluted regimes to reduce metal contamination of edible plants. It was suggested that with inoculation of A. schindleri SR-5-1, 75% WW dilution can be applied for irrigation of both nitrogen-fixing and non-nitrogen-fixing crops.

Engineered microbes as effective tools for the remediation of polyaromatic aromatic hydrocarbons and heavy metals

Heavy metals (HMs) and polycyclic aromatic hydrocarbons (PAHs) have become a major concern to human health and the environment due to rapid industrialization and urbanization. Traditional treatment measures for removing toxic substances from the environment have largely failed, and thus development and advancement in newer remediation techniques are of utmost importance. Rising environmental pollution with HMs and PAHs prompted the research on microbes and the development of genetically engineered microbes (GEMs) for reducing pollution via the bioremediation process. The enzymes produced from a variety of microbes can effectively treat a range of pollutants, but evolutionary trends revealed that various emerging pollutants are resistant to microbial or enzymatic degradation. Naturally, existing microbes can be engineered using various techniques including, gene engineering, directed evolution, protein engineering, media engineering, strain engineering, cell wall modifications, rationale hybrid design, and encapsulation or immobilization process. The immobilization of microbes and enzymes using a variety of nanomaterials, membranes, and supports with high specificity toward the emerging pollutants is also an effective strategy to capture and treat the pollutants. The current review focuses on successful bioremediation techniques and approaches that make use of GEMs or engineered enzymes. Such engineered microbes are more potent than natural strains and have greater degradative capacities, as well as rapid adaptation to various pollutants as substrates or co-metabolizers. The future for the implementation of genetic engineering to produce such organisms for the benefit of the environment andpublic health is indeed long and valuable.

Chromium toxicity and its remediation by using endophytic bacteria and nanomaterials: A review

Chromium (Cr) is a crucial element for all life forms. Various anthropogenic activities have been responsible for environmental contamination with Cr (VI) in recent years. For this review, articles were collected using electronic databases such as Web of Science, Pubmed, ProQuest, and Google Scholar as per the guidelines of PRISMA-2015, applying the Boolean search methods. Chromium can cause severe health complications in humans and animals and threatens the surrounding environment, with negative impacts on crop yield, development, and quality. Hence, monitoring Cr contamination is essential, and various remediation technologies have emerged in the past 50 years to reduce the amount of Cr in the environment. This review focuses on chromium exposure and the associated environmental health risks. We also reviewed sustainable remediation processes, with emphasis on nanoparticle and endophytic remediation processes.

A critical review on microbes-based treatment strategies for mitigation of toxic pollutants

Contamination of the environment through toxic pollutants poses a key risk to the environment due to irreversible environmental damage(s). Industrialization and urbanization produced harmful elements such as petrochemicals, agrochemicals, pharmaceuticals, nanomaterials, and herbicides that are intentionally or unintentionally released into the water system, threatening biodiversity, the health of animals, and humans. Heavy metals (HMs) in water, for example, can exist in a variety of forms that are inclined by climate features like the presence of various types of organic matter, pH, water system hardness, transformation, and bioavailability. Biological treatment is an important tool for removing toxic contaminants from the ecosystem, and it has piqued the concern of investigators over the centuries. In situ bioremediation such as biosparging, bioventing, biostimulation, bioaugmentation, and phytoremediation and ex-situ bioremediation includes composting, land farming, biopiles, and bioreactors. In the last few years, scientific understanding of microbial relations with particular chemicals has aided in the protection of the environment. Despite intensive studies being carried out on the mitigation of toxic pollutants, there have been limited efforts performed to discuss the solutions to tackle the limitations and approaches for the remediation of heavy metals holistically. This paper summarizes the risk assessment of HMs on aquatic creatures, the environment, humans, and animals. The content of this paper highlights the principles and limitations of microbial remediation to address the technological challenges. The coming prospect and tasks of evaluating the impact of different treatment skills for pollutant remediation have been reviewed in detail. Moreover, genetically engineered microbes have emerged as powerful bioremediation capabilities with significant potential for expelling toxic elements. With appropriate examples, current challenging issues and boundaries related to the deployment of genetically engineered microbes as bioremediation on polluted soils are emphasized.

Copper hydrophytoremediation by wetland macrophytes in semi-hydroponic and hydroponic mesocosms

High levels of trace metals such as copper (Cu) can affect water quality and induce toxic effects on living organisms in aquatic ecosystems. This research assesses the potential capacity for Cu phytofiltration by three emergent macrophytes from Cu-contaminated sediments and water containing five concentrations of Cu (0, 50, 100, 150, and 200 µM). We conducted a greenhouse study using semi-hydroponic and hydroponic experimental conditions to simulate a natural wetland system. We selected three plant types that were collected in Quebec (Canada): native Typha latifolia, and native and, exotic Phragmites australis. Under semi-hydroponic, the responses indicated an almost 3-fold higher mean root Cu-accumulation from Cu-0 to Cu-Sediment (80.3-226.1 mg kg^-1) and an 8.6-fold increase (122.2-1045.5 mg kg^-1) for Cu-0 to Cu-200 µM under hydroponic conditions, resulting in Cu translocation < 1 and BCF >1 under both conditions. We found an inverse correlation between increasing doses of Cu with mean aboveground and belowground biomass together with height, and root length of selected plants under hydroponic conditions. Our results indicate that these wetland macrophytes could be useful in heavy-metal removal from Cu-contaminated sediments and Cu-enriched water.

Omics approaches in bioremediation of environmental contaminants: An integrated approach for environmental safety and sustainability

Non-degradable pollutants have emerged as a result of industrialization, population growth, and lifestyle changes, endangering human health and the environment. Bioremediation is the process of clearing hazardous contaminants with the help of microorganisms, and cost-effective approach. The low-cost and environmentally acceptable approach to removing environmental pollutants from ecosystems is microbial bioremediation. However, to execute these different bioremediation approaches successfully, this is imperative to have a complete understanding of the variables impacting the development, metabolism, dynamics, and native microbial communities' activity in polluted areas. The emergence of new technologies like next-generation sequencing, protein and metabolic profiling, and advanced bioinformatic tools have provided critical insights into microbial communities and underlying mechanisms in environmental contaminant bioremediation. These omics approaches are meta-genomics, meta-transcriptomics, meta-proteomics, and metabolomics. Moreover, the advancements in these technologies have greatly aided in determining the effectiveness and implementing microbiological bioremediation approaches. At Environmental Protection Agency (EPA)-The government placed special emphasis on exploring how molecular and "omic" technologies may be used to determine the nature, behavior, and functions of the intrinsic microbial communities present at pollution containment systems. Several omics techniques are unquestionably more informative and valuable in elucidating the mechanism of the process and identifying the essential player's involved enzymes and their regulatory elements. This review provides an overview and description of the omics platforms that have been described in recent reports on omics approaches in bioremediation and that demonstrate the effectiveness of integrated omics approaches and their novel future use.

Endophyte colonization enhanced cadmium phytoremediation by improving endosphere and rhizosphere microecology characteristics

This study investigated the phytoremediation efficiency of Cd-contaminated soils by hyperaccumulator P. acinosa and its endophyte B. cereus, and evaluated the variation of rhizosphere/endosphere microecology characteristics. The result showed that endophyte PE31, which could successfully colonize on P. acinosa root, increased plant Cd uptake by 42.90% and 28.85% in low and high Cd contaminated soils by promotion of plant biomass and Cd concentration in plant tissues. The improved phytoremediation may attribute to the endophyte inoculation, which significantly improved the bioavailable heavy metal (HM) percentage, nutrient cycling related enzyme activities and nutrient contents including available potassium, phosphorus and organic matter. Additionally, the relative abundance beneficial bacteria Bacillus (significantly increased by 81.23% and 34.03% in the endosphere, and by 4.86% and 8.54% in rhizosphere in low and high Cd contaminated soils) and Lysobacter, showed positive and close correlation with plant growth and HM accumulation. These results indicated that endophyte inoculation could reshape rhizosphere and endosphere microecology characteristics, which enhanced the potential for phytoremediation of Cd contaminated soils.

Role of microbes in bioaccumulation of heavy metals in municipal solid waste: Impacts on plant and human being

The presence of heavy metals in municipal solid waste (MSW) is considered as prevalent global pollutants that cause serious risks to the environment and living organisms. Due to industrial and anthropogenic activities, the accumulation of heavy metals in the environmental matrices is increasing alarmingly. MSW causes several adverse environmental impacts, including greenhouse gas (GHG) emissions, river plastic accumulation, and other environmental pollution. Indigenous microorganisms (Pseudomonas, Flavobacterium, Bacillus, Nitrosomonas, etc.) with the help of new pathways and metabolic channels can offer the potential approaches for the treatment of pollutants. Microorganisms, that exhibit the ability of bioaccumulation and sequestration of metal ions in their intracellular spaces, can be utilized further for the cellular processes like enzyme signaling, catalysis, stabilizing charges on biomolecules, etc. Microbiological techniques for the treatment and remediation of heavy metals provide a new prospects for MSW management. This review provides the key insights on profiling of heavy metals in MSW, tolerance of microorganisms, and application of indigenous microorganisms in bioremediation. The literatures revealed that indigenous microbes can be exploited as potential agents for bioremediation.

Effects of Different Native Plants on Soil Remediation and Microbial Diversity in Jiulong Iron Tailings Area, Jiangxi

Phytoremediation is an important solution to heavy metal pollution in soil. However, the impact of plants on microbial communities in contaminated soil also requires attention. Community-level physiological profiling (CLPP) based on the Biolog™ EcoPlate and high-throughput sequencing were used to study the soil microbial community in this article. The rhizosphere and bulk soil samples of six native species were collected from the iron mine tailings on Jiulong Mountain, Jiangxi Province. According to the average well color development (AWCD), all plants improved the activity and diversity of the contaminated soil microbial community to varying degrees. Cunninghamia lanceolate is considered to have good effects and led to the appearance of Cunninghamia lanceolata > Zelkova schneideriana > Toona ciliata > Alnus cremastogyne > Cyclobalanopsis myrsinifolia > Pinus elliottii. The Shannon–Wiener diversity index and principal component analysis (PCA) show that the evenness and dominance of soil microbial communities of several plants are structurally similar to those of uncontaminated soil (UNS). The results of high-throughput sequencing indicated that the bacterial community diversity of C. lanceolata, A. cremastogyne, and P. elliottii is similar to UNS, while fungal community diversity is different from UNS. C. lanceolata has a better effect on soil nutrients, C. myrsinifolia and P. elliottii may have a better effect on decreasing the Cu content. The objective of this study was to assess the influence of native plants on microbial communities in soils and the soil remediation capacity. Mortierellomycota was the key species for native plants to regulate Cu and microbial community functions. Native plants have decisive influence on microbial community diversity.

Crosstalk and gene expression in microorganisms under metals stress

Contamination of the environment with heavy metals (HMs) has led to huge global environmental issues. Industrialization activities such as mining, manufacturing, and construction generate massive amounts of toxic waste, posing environmental risks. HMs soil pollution causes a variety of environmental issues and has a detrimental effect on both animals and plants. To remove HMs from the soil, traditional physico-chemical techniques such as immobilization, electro-remediation, stabilization, and chemical reduction are used. Moreover, the high energy, trained manpower, and hazardous chemicals required by these methods make them expensive and non-environmentally friendly. Bioremediation process, which involves microorganism-based and microorganism-associated-plant-based approaches, is an ecologically sound and cost-effective strategy for restoring HMs polluted soil. Microbes adjust their physiology to these conditions to live, which can involve significant variations in the expression of the genes. A set of genes are activated in response to toxic metals in microbes. They can also adapt by modifying their shape, fruiting bodies creating biofilms, filaments, or chemotactically migrating away from stress chemicals. Microbes including Bacillus sp., Pseudomonas sp., and Aspergillus sp. has been found to have high metals remediation and tolerance capacity of up to 98% whether isolated or in combination with plants like Helianthus annuus, Trifolium repens, and Vallisneria denseserrulata. Several of the regulatory systems that have been discovered are unique, but there is also a lot of "cross-talk" among networks. This review discusses the current state of knowledge regarding the microbial signaling responses, and the function of microbes in HMs stress resistance.

Role of composted tannery solid waste and its autochthonous microbes in enhancing phytoextraction of toxic metals and stress abatement in sunflower

The excessive concentration of multiple heavy metals in the tannery solid waste (TSW) needs integrated process solutions for its decontamination. This study is aimed at deriving TSW compost and autochthonous microbe synergies for improving phytoextraction potential of sunflower. In-vessel composting of TSW was carried out by using fruit waste as an inoculum to achieve the optimized conditions. Autochthonous strains of Trichoderma viride and Bacilllus sp. isolated from TSW were utilized individually as well as in combination with TSWC amendments of 2.5, 5 and 10% (w/w) prepared in our pilot scale experiment. Analyses of TSW compost based on FTIR and SEM illustrated the wide range of functionality and porosity along the mesh of fungal hyphae and inorganic moieties present on the compost surface. Plant biomass and TMs uptake (Cr 540 mg kg^-1 > Cd 330 mg kg^-1 > Pb 285 mg kg^-1) were significantly pronounced in shoots of sunflower under combined treatments at 10% TSWC amended soils. However, in seeds, TMs were found below detection limit (BDL) through atomic absorption spectrophotometry. Biochemical assays of sunflower including total chlorophyll content (18%), total soluble protein (45%), superoxide dismutase (80%) and catalase (75%) activities were also increased significantly at higher level of amendment in combination with microbes than in the control. Despite being high in TMs, high biomass in sunflower and associated elevation in biochemical products demonstrate the potential of TSW for valorization.Novelty statement: This study identifies the cost-effective management of multi metal contaminated tannery solid waste through deriving its compost along with autochthonous microbes as phytoextraction assistants by yielding higher plant biomass. This study suggests the use of composted TSW inoculated with selected autochthonous fungi and bacteria for enhancing sunflower's biomass and enhancing the bioavailable fractions of toxic metals for phytoextraction.

Plants-Microorganisms-Based Bioremediation for Heavy Metal Cleanup: Recent Developments, Phytoremediation Techniques, Regulation Mechanisms, and Molecular Responses

Rapid industrialization, mine tailings runoff, and agricultural activities are often detrimental to soil health and can distribute hazardous metal(loid)s into the soil environment, with harmful effects on human and ecosystem health. Plants and their associated microbes can be deployed to clean up and prevent environmental pollution. This green technology has emerged as one of the most attractive and acceptable practices for using natural processes to break down organic contaminants or accumulate and stabilize metal pollutants by acting as filters or traps. This review explores the interactions between plants, their associated microbiomes, and the environment, and discusses how they shape the assembly of plant-associated microbial communities and modulate metal(loid)s remediation. Here, we also overview microbe-heavy-metal(loid)s interactions and discuss microbial bioremediation and plants with advanced phytoremediation properties approaches that have been successfully used, as well as their associated biological processes. We conclude by providing insights into the underlying remediation strategies' mechanisms, key challenges, and future directions for the remediation of metal(loid)s-polluted agricultural soils with environmentally friendly techniques.

Recent advances in application of iron-manganese oxide nanomaterials for removal of heavy metals in the aquatic environment

Heavy metal pollution has a serious negative impact on the ecological environment and human health due to its toxicity, persistence, and non-biodegradable properties. Among the technologies applied in heavy metals removal, adsorption has been widely used as the most promising method because of its simple operation, high removal efficiency, strong applicability, and low cost. Iron-manganese oxide nanomaterials, as an effective absorbent, have attracted wide attention due to their simple preparation, wide material sources, and lower ecological impact. So far, no quantitative investigation has been conducted on the preparation and application of iron-manganese oxide nanomaterials in heavy metals removal. This review discussed the preparation methods and characteristics of iron‑manganese oxide nanomaterials over the past decade and provided some basic information for the improvement of preparation methods. The physicochemical properties of iron‑manganese oxide nanomaterials and environmental conditions are regarded as important factors that affect the removal efficiency of heavy metals. In addition, the removal mechanisms of heavy metals in aqueous solution with iron‑manganese oxide nanomaterials were mainly included redox, complex precipitation, electrostatic attraction, and ion exchange. The reusability and practicability in actual wastewater treatment of 3nganese oxide nanomaterials were further discussed. Several key problems still need to be solved in the existing progress, such as improving the ability and stability of the iron‑manganese oxide nanomaterials to remove heavy metals from actual wastewater. In conclusion, this review provides a future direction for the application of iron‑manganese oxide nanomaterials for heavy metals removal and even in the large-scale treatment of actual wastewater.

Identification of heavy metals tolerant Brevundimonas sp. from rhizospheric zone of Saccharum munja L. and their efficacy in in-situ phytoremediation

Heavy metals phytoremediation from pulp and paper industry (PPI) sludge was conducted by employing root-associated Brevundimonas sp (PS-4 MN238722.1) in rhizospheric zone of Saccharum munja L. for its detoxification. The study was aimed to investigate the efficiency of Saccharum munja L. for the removal of heavy metals along with physico-chemical parameters through bacterial interactions. Physico-chemical examination of PPI sludge showed biochemical oxygen demand (8357 ± 94 mg kg^-1), electrical conductivity (2264 ± 49 μmhoscm^-1), total phenol (521 ± 24 mg kg^-1), total dissolve solid (1547 ± 23 mg kg^-1), total nitrogen (264 ± 2.13 mg kg^-1), pH (8.2 ± 0.11), chemical oxygen demand (34756 ± 214 mg kg^-1), color (2434 ± 45 Co-Pt), total suspended solid (76 ± 0.67 mg kg^-1), sulphate (2462 ± 13 mg kg^-1), chlorolignin (597 ± 13.01 mg kg^-1), K⁺ (21.04 ± 0.26 mg kg^-1), total solid (1740 ± 54 mg kg^-1), phosphorous, Cl^-, and Na⁺. Heavy metals, such as Fe followed by Zn, Mn, Cd, Cu, Ni, Pb, As, Cr and Hg were above the permissible limit. Root and shoot of Saccharum munja L. revealed highest concentrations of Cd followed by Mn, Ni, Fe, Zn, Cu, As, Cr, Hg, and Pb. Tested metals (Fe, Mn, Pb, Cd, Cr, Cu, Zn, Ni, As, and Hg) bioaccumulation and translocation factors were also revealed to be < 1 and >1, respectively, demonstrating that these plants have considerable absorption and translocation abilities. Plant growth-promoting activity, such as ligninolytic enzymes, hydrolytic enzymes, indole acetic acid, and siderophore production activity of Brevundimonas sp. (PS-4 MN238722.1) were also noted to be higher. These findings support the use of Brevundimonas sp (PS-4 MN238722.1) in combination with Saccharum munja L. plant as interdisciplinary management of industrial sludge at polluted areas for the prevention of soils near the industrial site.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Remediation of noxious wastewater using nanohybrid adsorbent for preventing water pollution

Removal of toxic elements from wastewater effluent has got a lot of attention because of their severe negative effects on human and environmental health. In the past few years, rapid urbanization and industrial activities in developing countries have exacerbated the destruction of the environment. Most of the wastewater effluents are discharged untreated or inadequately treated, which has become a major concern due to its impact on sustainability and the environment. This is imperative to implement, innovative and resourceful wastewater treatment technologies requiring low investment. Among the various treatment technologies, cutting-edge processes in nano-material sciences have recently piqued the interest of scientists. Nanohybrid absorbents have the potential in improving wastewater treatment and increase water supply by utilizing unconventional water resources. Carbon nanotubes, titanium oxide, manganese oxide, activated carbon (AC), magnesium oxide, graphene, ferric oxides, and zinc oxide are examples of nano-adsorbents that are used to eliminate pollutants. This also demonstrated the effective removal of contaminants along with the harmful effects of chemicals, colorants, and metals found in wastewater. The present manuscript examines potential advances in nanotechnology in wastewater treatment for the prevention of water and soil pollution. This systematic review aims to highlight the importance of nanohybrid absorbents treatment technology for wastewater treatment and to explain how nanohybrid absorbents have the potential to revolutionize industrial pollution. There are also other published review articles on this topic but the present review covers an in-depth information on nano-adsorbents and their targeted contaminants.

Emerging microalgae-based technologies in biorefinery and risk assessment issues: Bioeconomy for sustainable development

Industrial wastewater treatment is of paramount importance considering the safety of the aquatic ecosystem and its associated health risk to humankind inhabiting near the water bodies. Microalgae-based technologies for remediation of environmental pollutants present avenues for bioenergy applications and production of value-added biochemicals having pharmaceutical, nutraceutical, antioxidants, carbohydrate, phenolics, long-chain multi-faceted fatty acids, enzymes, and proteins which are considered healthy supplements for human health. Such a wide range of products put up a good case for the biorefinery concept. Microalgae play a pivotal role in degrading complex pollutants, such as organic and inorganic contaminants thereby efficiently removing them from the environment. In addition, microalgal species, such as Botryococcus braunii, Tetraselmis suecica, Phaeodactylum tricornutum, Neochloris oleoabundans, Chlorella vulgaris, Arthrospira, Chlorella, and Tetraselmis sp., etc., are also reported for generation of value-added products. This review presents a holistic view of microalgae based biorefinery starting from cultivation and harvesting of microalgae, the potential for remediation of environmental pollutants, bioenergy application, and production of value-added biomolecules. Further, it summarizes the current understanding of microalgae-based technologies and discusses the risks involved, potential for bioeconomy, and outlines future research directions.

Health hazards of hexavalent chromium (Cr (VI)) and its microbial reduction

Industrial effluents/wastewater are the main sources of hexavalent chromium (Cr (VI)) pollutants in the environment. Cr (VI) pollution has become one of the world’s most serious environmental concerns due to its long persistence in the environment and highly deadly nature in living organisms. To its widespread use in industries Cr (VI) is highly toxic and one of the most common environmental contaminants. Cr (VI) is frequently non-biodegradable in nature, which means it stays in the environment for a long time, pollutes the soil and water, and poses substantial health risks to humans and wildlife. In living things, the hexavalent form of Cr is carcinogenic, genotoxic, and mutagenic. Physico-chemical techniques currently used for Cr (VI) removal are not environmentally friendly and use a large number of chemicals. Microbes have many natural or acquired mechanisms to combat chromium toxicity, such as biosorption, reduction, subsequent efflux, or bioaccumulation. This review focuses on microbial responses to chromium toxicity and the potential for their use in environmental remediation. Moreover, the research problem and prospects for the future are discussed in order to fill these gaps and overcome the problem associated with bacterial bioremediation’s real-time applicability.

Bioaugmentation and bioaugmentation-assisted phytoremediation of heavy metal contaminated soil by a synergistic effect of cyanobacteria inoculation, biochar, and purslane (Portulaca oleracea L.)

In recent decades, soil contamination with heavy metals has become an environmental crisis due to their long-term stability and adverse biological effects. Therefore, bioremediation is an eco-friendly technology to remediate contaminated soil, which the efficiency requires further research. This study was designed to comparatively investigate two strategies: bioaugmentation by using a cyanobacterial species (Oscillatoria sp.) and bioaugmentation-assisted phytoremediation by using Oscillatoria sp. and purslane (Portulaca oleracea L.) for the bioremediation of soil contaminated by heavy metals (Cr (III), Cr (VI), Fe, Al, and Zn). Various quantities of biochar (0.5, 2, and 5% (w/w)) were used as an amendment in the experiments to facilitate the remediation process. The results of the bioaugmentation test showed that applying biochar and cyanobacteria into contaminated soil significantly increased the chlorophyll a, nitrogen, and organic carbon contents. In contrast, the extractable fractions of Cr (III), Cr (VI), Zn, Al, and Fe declined compared with those of the control treatment. The highest reduction content (up to 87 %) in the extractable portion was obtained for Cr (VI). The development of longer root and hypocotyl lengths and vigour index from lettuces and radish seeds grown in the remediated soil confirmed the success of remediation treatments. Moreover, the findings of the bioaugmentation-assisted phytoremediation test displayed a reduction in the bioavailable fraction of Cr (III), Cr (VI), Zn, Al, and Fe. Cr (III) presented the highest reduction (up to 90 %) in metal bioavailability. With cyanobacteria inoculation and biochar addition, the shoot and root lengths of purslane grew 4.6 and 3-fold while the heavy metal accumulation decreased significantly. Besides, these treatments enhanced the tolerance index (TI) quantities of purslane whereas diminished its bioaccumulation coefficient (BAC) and bioconcentration factor (BCF) values. For all heavy metals (except Zn), translocation factor (TF) and BAC values were found to be less than 1.0 at all treatments, indicating the successful phytoextraction by the purslane. These results suggest that the purslane can be considered an excellent phytoextracting agent for soils contaminated with heavy metals.

Microbial recovery of critical metals from secondary sources

The continuous development of technologies involving critical metals, both in Europe and over the world, and geopolitical challenges in areas rich in critical metal sources, imposed increased research efforts to recover them from secondary sources, by eco-efficient processes. Yet, microbes-metal interactions are not sufficiently exploited to recover metals from secondary sources, although they are already used in ore extraction. This review examines and compare strategies and processes involving microorganisms for critical metals recovery, since conventional physico-chemical methods are energy-intensive and often polluting. Two groups of microbial assisted recovery processes are discussed: metal mobilization from metal bearing waste, and selective metal separation from leaching solutions by immobilization on microbial biomass. Because most of the identified microbial technologies are developed on laboratory scale, the increase of biorecovery efficiency is compulsory for enhancing scaling-up potential. Future developments focused on novel microorganisms and high-performance strategies for critical metal recovery by microbial processes are considered.

Potential of Bacterial Strains Isolated from Coastal Water for Wastewater Treatment and as Aqua-Feed Additives

Bacteria have various and sustained effects on humans in various fields: molecular biology, biomedical science, environmental/food industry, etc. This study was conducted to evaluate the wastewater treatment capacity and feed-additive fish-growth effect of four strains of bacteria: Pseudoalteromonas mariniglutinosa, Psychrobacter celer, Bacillus albus, and Bacillus safensis. In a wastewater degradation experiment, (i) nitrate-N and nitrite-N were removed within 1 h in all of the 4 bacterial strains; (ii) the removal rates of TAN and TN were higher in all of the strains relative to the B. subtilis. In a feed-additive experiment (5% Kg-1), (i) the growth of fish was higher in all of the 4 bacterial strains with the B. subtilis relative to the commercial feed; (ii) there was no significant growth difference for B. albus and B. safensis relative to the B. subtilis, but growth was higher in P. mariniglutinosa and P. celer. The results indicated that the 4 bacterial strains can be effectively utilized for biological wastewater treatment processes and as aqua-feed.

Bioremediation of heavy metals from industrial effluents by endophytes and their metabolic activity: Recent advances

Worldwide, heavy metals pollution is mostly caused by rapid population growth and industrial development which is accumulated in food webs causing a serious public health risk. Endophytic microorganisms have a variety of mechanisms for metal sequestration having metal biosorption capacities.Endophytic organisms like bacteria and fungi provide beneficial qualities that help plants to improve their health, reduce stress, and detoxify metals. Endophytes have a higher proclivity for improving metal and mineral solubility by cells that secrete low-molecular-weight organic acids and metal-specific ligands like siderophores, which change the pH of the soil and improve binding activity. Protein-related approaches like chromatin immunoprecipitation sequencing (ChIP-Seq) and modified enzyme-linked immunosorbent assay (ELISA test) can represent endophytic bacterial community and DNA-protein interactions during metal reduction. This review explored the role of endophytes in bioremediation approaches that can help in analyzing the potential and prospects in response to industrial effluents' detoxification.

Impact of rhizosphere microorganisms on arsenic (As) transformation and accumulation in a traditional Chinese medical plant

Panax notoginseng is an important traditional medicinal plant, but the commercial value is threatened by root-rot disease caused by rhizosphere microbes and a potential health risk caused by plant arsenic (As) accumulation. Whether rhizospheric microbes isolated from P. notoginseng rhizosphere soil could impact As uptake and transport into P. notoginseng is not yet known. Among the three root-rot disease-causing pathogens Fusarium flocciferum (PG 1), Fusarium oxysporum (PG 2), and Fusarium solani (PG 3) and one root-rot disease biocontrol fungus Trichoderma koningiopsis (FC 1) and five biocontrol-exerting bacterial species Bacillus siamensis (BC 1), Delftia acidovorans (BC 2), Brevibacillus formosus (BC 3), Mortierella alpine (BC 4), and Bacillus subtilis (BC 5), one As-resistant pathogen and four biocontrol microorganisms with As-resistant ability were identified. The As-transforming ability of the identified fungi and bacteria was ranked in the order of FC 1 > PG 1 and BC 2 > BC 3 > BC 1, respectively. Then, the As-resistant biocontrol and pathogenic microbes were initiated to colonize the rhizosphere of 1-year-old P. notoginseng seedlings growing in artificially As(V)-contaminated soil to evaluate the impact of microbe inoculation on P. notoginseng As uptake and transport capacity. Concentration of As in P. notoginseng tissues decreased in the order of the sequence stem > root > leaf. Compared to treatment without colonization by microorganism, inoculation with microorganisms increased As root uptake efficiency and root As concentration, especially under treatment of inoculation by BC 2 and PG 1 + BC 2. As transport efficiency from root to stem decreased by inoculation with microorganism, especially under treatment with inoculation of BC 2 and PG 1 + BC 2. However, the impact of microorganism colonization on As stem to leaf transport efficiency was not obvious. In summary, inoculation with rhizosphere microbes may increase As accumulation in P. notoginseng root, especially when using bacteria with high As transformation ability. Therefore, it is necessary to evaluate the As transformation capacity before applying biological control microorganism to the rhizosphere of P. notoginseng.

Heavy Metals and Human Health: Possible Exposure Pathways and the Competition for Protein Binding Sites

Heavy metals enter the human body through the gastrointestinal tract, skin, or via inhalation. Toxic metals have proven to be a major threat to human health, mostly because of their ability to cause membrane and DNA damage, and to perturb protein function and enzyme activity. These metals disturb native proteins’ functions by binding to free thiols or other functional groups, catalyzing the oxidation of amino acid side chains, perturbing protein folding, and/or displacing essential metal ions in enzymes. The review shows the physiological and biochemical effects of selected toxic metals interactions with proteins and enzymes. As environmental contamination by heavy metals is one of the most significant global problems, some detoxification strategies are also mentioned.

Water recovery and on-site reuse of laundry wastewater by a facile and cost-effective system: Combined biological and advanced oxidation process

Combined biological and physicochemical process was selected for treatment of laundry wastewater. The results show that after microbial adaptation, almost 91% of COD was removed at food to microorganism (F/M) ratio of 0.12 gBOD/gMLSS·d. Dehydrogenase activity of the biomass showed an increasing trend and finally reached 3.8 μgTFgbiomass.d corresponding to the highest process performance. 16SrRNA fragment and phylogenetic analysis identified Pseudomonas pharmacofabricae and Bacillus spp. as the dominant bacteria. The effluent of the biological process was then injected into the UV/O3 process for complete removal of residual COD and detergent. Finally, microfiltration and ultrafiltration were used to remove any remaining suspended solids. The operating cost analysis showed that 0.65 €/m3 treated wastewater is required for treatment of the laundry wastewater. Accordingly, the suggested combination of the biological and physicochemical process could be a promising and highly efficient process for treatment and reuse of laundry wastewater.

Degradation of organometallic pollutants of distillery wastewater by autochthonous bacterial community in biostimulation and bioaugmentation process

This study aimed to detoxify and degrade the organometallic pollutants from distillery wastewater by using an autochthonous microbial community via biostimulation and bioaugmentation process. Results revealed that the wastewater contained high concentrations of the metals i.e. Fe-2403; Zn-210.15; Cr- 22.825; Cu-73.62; Mg-27.30; Ni-14.425; and Pb-17.33 (mg L^-1). The biostimulation and bioaugmentation process resulted from a substantial reduction (50-70%) in the pollution load. Scanning electron microscopy analysis showed bacterial community and their relationship with complex organometallic pollutants during the chemical reactions. The major identified organic pollutants in the control (untreated) samples were acetic acid, Oxo-,trimethylsilyl ester [CAS], Hydrocinnamic acid, p-[Trimethylsiloxy]-trimethylsilyl ester and tetradecanoic acid, trimethylsilyl ester [CAS] while some new metabolic products were generated as a by-product in bioaugmentation process. Therefore, the study showed that biostimulation and bioaugmentation were successful bioremediation strategies for the detoxification of distillery wastewater and restoration of organometallic polluted sites.

Metal and metal(loids) removal efficiency using genetically engineered microbes: Applications and challenges

The environment is being polluted in different many with metal and metalloid pollution, mostly due to anthropogenic activity, which is directly affecting human and environmental health. Metals and metalloids are highly toxic at low concentrations and contribute primarily to the survival equilibrium of activities in the environment. However, because of non-degradable, they persist in nature and these metal and metalloids bioaccumulate in the food chain. Genetically engineered microorganisms (GEMs) mediated techniques for the removal of metals and metalloids are considered an environmentally safe and economically feasible strategy. Various forms of GEMs, including fungi, algae, and bacteria have been produced by recombinant DNA and RNA technologies, which have been used to eliminate metal and metalloids compounds from the polluted areas. Besides, GEMs have the potentiality to produce enzymes and other metabolites that are capable of tolerating metals stress and detoxify the pollutants. Thus, the aim of this review is to discuss the use of GEMs as advanced tools to produce metabolites, signaling molecules, proteins through genetic expression during metal and metalloids interaction, which help in the breakdown of persistent pollutants in the environment.

Biocatalytic remediation of industrial pollutants for environmental sustainability: Research needs and opportunities

An increasing quantum of pollutants from various industrial sector activities represents a severe menace to environmental & ecological balance. Bioremediation is gaining flow globally due to its cost-effective and environment-friendly nature. Understanding biodegradation mechanisms is of high ecological significance. Application of microbial enzymes has been reported as sustainable approach to mitigate the pollution. Immobilized enzyme catalyzed transformations are getting accelerated attention as potential alternatives to physical and chemical methods. The attention is now also focused on developing novel protein engineering strategies and bioreactor design systems to ameliorate overall biocatalysis and waste treatment further. This paper presents and discusses the most advanced and state of the art scientific & technical developments about biocatalytic remediation of industrial pollutants. It also covers various biocatalysts and the associated sustainable technologies to remediate various pollutants from waste streams. Enzyme production and immobilization in bioreactors have also been discussed. This paper also covers challenges and future research directions in this field.

Chromium Stress in Plants: Toxicity, Tolerance and Phytoremediation

Extensive industrial activities resulted in an increase in chromium (Cr) contamination in the environment. The toxicity of Cr severely affects plant growth and development. Cr is also recognized as a human carcinogen that enters the human body via inhalation or by consuming Cr-contaminated food products. Taking consideration of Cr enrichment in the environment and its toxic effects, US Environmental Protection Agency and Agency for Toxic Substances and Disease Registry listed Cr as a priority pollutant. In nature, Cr exists in various valence states, including Cr(III) and Cr(VI). Cr(VI) is the most toxic and persistent form in soil. Plants uptake Cr through various transporters such as phosphate and sulfate transporters. Cr exerts its effect by generating reactive oxygen species (ROS) and hampering various metabolic and physiological pathways. Studies on genetic and transcriptional regulation of plants have shown the various detoxification genes get up-regulated and confer tolerance in plants under Cr stress. In recent years, the ability of the plant to withstand Cr toxicity by accumulating Cr inside the plant has been recognized as one of the promising bioremediation methods for the Cr contaminated region. This review summarized the Cr occurrence and toxicity in plants, role of detoxification genes in Cr stress response, and various plants utilized for phytoremediation in Cr-contaminated regions.

Elsayed E, El Enshasy HA. Role of Bacillus cereus in Improving the Growth and Phytoextractability of Brassica nigra (L.) K. Koch in Chromium Contaminated Soil

Plant growth-promoting rhizobacteria (PGPR) mediate heavy metal tolerance and improve phytoextraction potential in plants. The present research was conducted to find the potential of bacterial strains in improving the growth and phytoextraction abilities of Brassica nigra (L.) K. Koch. in chromium contaminated soil. In this study, a total of 15 bacterial strains were isolated from heavy metal polluted soil and were screened for their heavy metal tolerance and plant growth promotion potential. The most efficient strain was identified by 16S rRNA gene sequencing and was identified as Bacillus cereus. The isolate also showed the potential to solubilize phosphate and synthesize siderophore, phytohormones (indole acetic acid, cytokinin, and abscisic acid), and osmolyte (proline and sugar) in chromium (Cr+3) supplemented medium. The results of the present study showed that chromium stress has negative effects on seed germination and plant growth in B. nigra while inoculation of B. cereus improved plant growth and reduced chromium toxicity. The increase in seed germination percentage, shoot length, and root length was 28.07%, 35.86%, 19.11% while the fresh and dry biomass of the plant increased by 48.00% and 62.16%, respectively, as compared to the uninoculated/control plants. The photosynthetic pigments were also improved by bacterial inoculation as compared to untreated stress-exposed plants, i.e., increase in chlorophyll a, chlorophyll b, chlorophyll a + b, and carotenoid was d 25.94%, 10.65%, 20.35%, and 44.30%, respectively. Bacterial inoculation also resulted in osmotic adjustment (proline 8.76% and sugar 28.71%) and maintained the membrane stability (51.39%) which was also indicated by reduced malondialdehyde content (59.53% decrease). The antioxidant enzyme activities were also improved to 35.90% (superoxide dismutase), 59.61% (peroxide), and 33.33% (catalase) in inoculated stress-exposed plants as compared to the control plants. B. cereus inoculation also improved the uptake, bioaccumulation, and translocation of Cr in the plant. Data showed that B. cereus also increased Cr content in the root (2.71-fold) and shoot (4.01-fold), its bioaccumulation (2.71-fold in root and 4.03-fold in the shoot) and translocation (40%) was also high in B. nigra. The data revealed that B. cereus is a multifarious PGPR that efficiently tolerates heavy metal ions (Cr+3) and it can be used to enhance the growth and phytoextraction potential of B. nigra in heavy metal contaminated soil.