Structure-property-performance relationships of lactic acid-based deep eutectic solvents with different hydrogen bond acceptors for corn stover pretreatment

Novel ternary deep eutectic solvent fractionation for effective utilization of willow

A novel ternary deep eutectic solvent (TDES), consisting of zinc chloride, ethylene glycol and alpha hydroxy carboxylic acids (i.e., glycolic acid, citric acid and malic acid), was first proposed to effectively fractionate and convert willow (Salix matsudana cv. Zhuliu) into fermentable sugar. In particular, the zinc chloride/ethylene glycol/malic acid (ZnCl2/EG/MA) TDES system showed remarkable fractionation performance with 91.66 % xylan and 90.12 % lignin removals at 130 °C for 1.5 h, resulting in 96.01 % glucose yield in the subsequent enzymatic hydrolysis stage. Moreover, the regenerated lignin showed regular nanoparticle morphology and good antioxidant properties. Even after four recycling, the TDES showed 70.16 % of delignification and 83.70 % glucose yield with the TDES pretreated willow. Overall, this study demonstrated an effective solvent fractionation approach to maximize the utilization of total lignocellulose under mild conditions.

Bioactive composite films with improved antioxidant and barrier properties prepared from sodium alginate and deep eutectic solvent treated distillers' grains

In this work, a straightforward approach utilizing distillers' grains (DG) waste and sodium alginate (SA) was developed to prepare functional and bioactive packaging films. Deep eutectic solvents (DESs) were initially synthesized from choline chloride (CO), betaine (BO), glycerol (GO), and oxalic acid. Composite films were then prepared from DES-treated DG slurry and SA at different ratios. Characterization and analysis revealed that adding 75 % CO-treated DG slurry reduced the water vapor permeability (WVP) by over 66 % compared to that of the SA film. Composite films containing CO/BO-treated DG slurry had an ultraviolet light barrier rate exceeding 99 %, while those with 75 % DES-treated DG slurry demonstrated excellent antioxidant activity, with a 2,2'-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) free radical scavenging rate of 80.14 %-88.35 %, representing a 322.45 %-365.73 % increase compared to that of the pure SA film. These composite films also exhibited favorable mechanical properties (31.58 MPa, 5.53 % EB), thermal stability, and biodegradability, extending the shelf life of grapes by 1.8 times. In conclusion, bioactive composite films derived from DES-treated DG are expected to replace petroleum-based plastics, enhancing sustainable biomass use and environmental responsibility.

Synergism of jet milling and deep eutectic solvent pretreatment on grapevine lignin fractionation and enhancing enzymatic hydrolysis

Herein, we investigated the synergistic effects of jet milling (JM) and deep eutectic solvent (DES) pretreatment on the fractionation of grapevine lignin and the consequent enhancement of enzymatic hydrolysis. Grapevine, a substantial byproduct of the wine industry, was subjected to JM pretreatment to produce finely powdered particles (median diameter D50 = 98.90), which were then further treated with acidic ChCl-LA and alkaline K2CO3-EG DESs. The results revealed that the combined JM + ChCl-LA pretreatment significantly increased the cellulose preservation under optimal conditions (110 °C, 4 h, and 20 % water content), achieving removal rates of 74.18 % xylan and 66.05 % lignin, respectively. The pretreatment temperature and inhibitor production were reduced, resulting in a remarkable threefold increase in glucose yield compared to untreated samples. Moreover, the structural analysis of the pretreated lignin indicated an enrichment of phenolic units, leading to enhanced antioxidant and antibacterial activities, particularly in the JM pretreated samples. These findings underscore the promising potential of the synergistic JM and DES pretreatment in facilitating the efficient utilization of grapevine lignocellulosic biomass for sustainable biorefinery technologies.

Upcycling poly(succinates) with amines to N-substituted succinimides over succinimide anion-based ionic liquids

The chemical transformation of waste polymers into value-added chemicals is of significance for circular economy and sustainable development. Herein, we report upcycling poly(succinates) (PSS) with amines into N-substituted succinimides over succinimide anion-based ionic liquids (ILs, e.g, 1,8-diazabicyclo[5.4.0]undec-7-ene succinimide, [HDBU][Suc]). Assisted with H2O, [HDBU][Suc]) showed the best performance, which could achieve complete transformation of a series of PSS into succinimide derivatives and corresponding diols under mild and metal-free conditions. Mechanism investigation indicates that the cation-anion confined hydrogen-bonding interactions among IL, H2O, ester group, and amino/amide groups, strengthens nucleophilicity of the N atoms in amino/amide groups, and improves electrophilicity of carbonyl C atom in ester group. The attack of the amino/amide N atom on carbonyl C of ester group results in cleavage of carbonyl C-O bond in polyester and formation of amide group. This strategy is also effective for aminolysis of poly(trimethylene glutarate) to glutarimides, and poly(1,4-butylene adipate) to caprolactone diimides.

Recent advances in biorefineries based on lignin extraction using deep eutectic solvents: A review

Considering the urgent need for alternative biorefinery schemes based on sustainable development, this review aims to summarize the state-of-the-art in the use of deep eutectic solvent pretreatment to fractionate lignocellulose, with a focus on lignin recovery. For that, the key parameters influencing the process are discussed, as well as various strategies to enhance this pretreatment efficiency are explored. Moreover, this review describes the challenges and opportunities associated with the valorization of extraction-derived streams and highlights recent advancements in solvent recovery techniques. Furthermore, the utilization of computational models for process design and optimization is introduced, as the initial attempts at the economic and environmental assessment of this lignocellulosic bioprocess based on deep eutectic solvents. Overall, this review offers a comprehensive perspective on the recent advances in this emerging field and serves as a foundation for further research on the potential integration of deep eutectic pretreatment in sustainable multi-product biorefinery schemes.

Switchable Deep Eutectic Solvents for Lignin Dissolution and Regeneration

Deep eutectic solvents (DESs) are promising for lignin dissolution and extraction. However, they usually possess high polarity and are difficult to recycle. To overcome this drawback, a variety of switchable ionic liquids (SILs) composed of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) and alcohols was synthesized and screened. According to the thermodynamic modeling suggestions, the selected DBU-HexOH SIL was coupled with hydrogen-bond donors to form switchable-DES (SDES) systems with moderated viscosity, conductivity, and pH while maintaining switchability. The SDESs produced a well-improved lignin and lignin model compound solubility compared with those of SILs; charging CO2 into SDES (SDESCO2) caused a further increase in solubility. The solubility (25 °C) of syringic acid, ferulic acid, and milled wood lignin in SDESCO2 reached 230.57, 452.17, and 279.12 mg/g, respectively. Such SDES-dissolved lignin can be regenerated using acetone as an anti-solvent. The SDES-regenerated lignin exhibited a well-preserved structure with no noticeable chemical modifications. Furthermore, the SDESCO2 lignin possessed a higher molecular weight (Mw = 10,340 g/mol; Mn = 7672 g/mol), improved uniformity (polydispersity index = 1.35), and a higher guaiacyl lignin unit content compared with the original milled wood lignin. The SDES system proposed in the present work could benefit the fractionation of lignin compounds and facilitate downstream industrial processes.

Natural arginine-based deep eutectic solvents for rapid microwave-assisted pretreatment on crystalline bamboo cellulose with boosting enzymatic conversion performance

Development of amino acid-based natural deep eutectic solvents (DESs) pretreatment technology on lignocellulosic biomass is a promising approach to biorefinery. In this study, for arginine-based DESs with different molar ratios, the viscosity and Kamlet-Taft solvation parameters were quantified to evaluate the pretreatment performance on bamboo biomass. Further, microwave assisted DES pretreatment was eminent, evidenced by 84.8% lignin removal and increased saccharification yield (from 6.3% to 81.9%) in moso bamboo at 120 °C and ratio of 1:7 (arginine: lactic acid). Results showed degradation of lignin molecules together with release of phenolic hydroxyl units after DESs pretreatment, which is conducive to subsequent utilization. Meanwhile, DES-pretreated cellulose exhibited unique structural characteristics including destroyed crystalline region of cellulose (Crystallinity Index from 67.2% to 53.0%), decreased crystallite size (from 3.41 nm to 3.14 nm) and roughened fiber surface. Thus, arginine-based DES pretreatment has excellent potential in bamboo lignocellulose pretreatment.

Comprehensive understanding of enzymatic saccharification of Betaine:Lactic acid-pretreated sugarcane bagasse

Green solvents, especially deep eutectic solvents (DESs), are widely applied to pretreat biomass for enhancing its enzymatic hydrolysis. In this work, lactic acid was selected as the hydrogen-bond-donor to prepare Betaine-base DES (Betaine:LA), The DES was utilized to pretreat sugarcane bagasse (SCB) at 160 ℃ for 80 min (severity factor LogR0 = 3.67). The influences of Betaine:LA treatment on the chemical composition, crystal and microstructure structure of cellulose, and cellulase digestion were investigated. The results showed that the lignin (47.1%) and xylan (44.6%) were removed, the cellulase digestibility of Betaine:LA-treated SCB was 4.2 times that of the raw material. This improved efficiency was attributed to the enhanced accessibility of cellulose, the weakened surface area of lignin, the declined hydrophobicity, and the decreased crystallinity of cellulose. Several compelling linear correlations were fitted between enzymatic hydrolysis and these alterations of physicochemical features, comprehensively understanding enzymatic saccharification of Betaine:LA-pretreated SCB.

Exploring carbohydrate extraction from biomass using deep eutectic solvents: Factors and mechanisms

Deep eutectic solvents (DESs) are increasingly being recognized as sustainable and promising solvents because of their unique properties: low melting point, low cost, and biocompatibility. Some DESs possess high viscosity, remarkable stability, and minimal toxicity, enhancing their appeal for diverse applications. Notably, they hold promise in biomass pretreatment, a crucial step in biomass conversion, although their potential in algal biomass carbohydrates extraction remains largely unexplored. Understanding the correlation between DESs' properties and their behavior in carbohydrate extraction, alongside cellulose degradation mechanisms, remains a gap. This review provides an overview of the use of DESs in extracting carbohydrates from lignocellulosic and algal biomass, explores the factors that influence the behavior of DESs in carbohydrate extraction, and sheds light on the mechanism of cellulose degradation by DESs. Additionally, the review discusses potential future developments and applications of DESs, particularly extracting carbohydrates from algal biomass.

Glycolic acid-based deep eutectic solvents boosting co-production of xylo-oligomers and fermentable sugars from corncob and the related kinetic mechanism

BACKGROUND

Xylo-oligomers are a kind of high value-added products in biomass fractionation. Although there are several chemical methods to obtain xylo-oligomers from biomass, the reports about the deep eutectic solvents (DESs)-mediated co-production of xylo-oligomers and fermentable sugars and the related kinetic mechanism are limited.

RESULTS

In this work, glycolic acid-based DESs were used to obtain xylo-oligomers from corncob. The highest xylo-oligomers yield of 65.9% was achieved at 120 °C for 20 min, of which the functional xylo-oligosaccharides (XOSs, DP 2-5) accounted for up to 31.8%. Meanwhile, the enzymatic digestion of cellulose and xylan in residues reached 81.0% and 95.5%, respectively. Moreover, the addition of metal inorganic salts significantly accelerated the hydrolysis of xylan and even the degradation of xylo-oligomers in DES, thus resulting in higher selectivity of xylan removal. AlCl3 showed the strongest synergistic effect with DES on accelerating the processes, while FeCl2 is best one for xylo-oligomers accumulation, affording the highest xylo-oligomers yield of 66.1% for only 10 min. Furthermore, the kinetic study indicates that the 'potential hydrolysis degree' model could well describe the xylan hydrolysis processes and glycolic acid/lactic acid (3:1) is a promising solvent for xylo-oligomers production, in particular, it worked well with FeCl2 for the excellent accumulation of xylo-oligomers.

CONCLUSIONS

Glycolic acid-based deep eutectic solvents can be successfully applied in corncob fractionation with excellent xylo-oligomers and fermentable sugars yields on mild conditions, and the large amount of xylo-oligosaccharides accumulation could be achieved by specific process controlling. The strategies established here can be useful for developing high-valued products from biomass.

Theoretical study of lactic acid-based deep eutectic solvents dissociation of hemicellulose with different hydrogen bonding acceptors

This paper explored the mechanism of dissociation of hemicellulose using lactic acid (LA)-based deep eutectic solvents (DESs) synthesized with different hydrogen bond acceptors (HBAs) via simulations. Density functional theory (DFT) calculations and molecular dynamics (MD) simulations revealed that DESs synthesized with guanidine hydrochloride (GuHCl) as hydrogen bond acceptor (HBA) demonstrated better hemicellulose solubilization compared to the conventional DESs synthesized using choline chloride (ChCl) as HBA. The best interaction with hemicellulose was achieved at GuHCl:LA = 1:1. The results showed that CL^- played a dominant role in the dissolution of hemicellulose by DESs. Unlike ChCl, the guanidine group in GuHCl had the delocalized π bond, which made CL^- have stronger coordination ability and promoted dissolution of hemicellulose by DESs. Moreover, multivariable analysis was employed to establish the correlation between the effects of different DESs on hemicellulose and the molecular simulation results. Additionally, the influence of different HBAs functional groups and carbon chain length on the solubilization of hemicellulose by DESs were analyzed.

Acidic and alkaline deep eutectic solvents (DESs) pretreatment of grapevine: Component analysis, characterization, lignin structural analysis, and antioxidant properties

Deep eutectic solvents (DESs) have been extensively applied to pretreat lignocellulose; however, comparative research on acidic and alkaline DES pretreatment is relatively lacking. Herein, pretreatment of grapevine agricultural by-products with seven DESs were compared in terms of removal of lignin and hemicellulose and component analysis of the pretreated residues. Among the tested DESs, both acidic choline chloride-lactic (CHCl-LA), and alkaline potassium carbonate-ethylene glycol (K₂CO₃-EG) were effective in delignification. Thereafter, the CHCl-LA and K₂CO₃-EG extracted lignin was compared by analyzing their physicochemical structure changes and antioxidant properties. The results showed that the thermal stability, molecular weight, and phenol hydroxyl percentage of CHCl-LA lignin were inferior to K₂CO₃-EG lignin. It was found that the high antioxidant activity of K₂CO₃-EG lignin was mainly attributed to the abundant phenol hydroxyl, guaiacyl (G), and para-hydroxy-phenyl (H). By comparing acidic and alkaline DES pretreatments and their lignin nuances in biorefining, novel insights are derived for the scheduling and selection of DES for lignocellulosic pretreatment.

Lactate anion catalyzes aminolysis of polyesters with anilines

Chemical transformation of spent polyesters into value-added chemicals is substantial for sustainable development but still challenging. Here, we report a simple, metal-free, and efficient aminolysis strategy to upcycle polylactic acid by anilines over lactate-based ionic liquids (e.g., tetrabutylammonium lactate), accessing a series of N-aryl lactamides under mild conditions. This strategy is also effective for degradation of poly(bisphenol A carbonate), affording bisphenol A and corresponding diphenylurea derivatives. It is found that, with the assistance of water, lactate anion as hydrogen-bond donor can efficiently activate carbonyl C atom of polyesters via hydrogen bonding with carbonyl O atom; meanwhile, as hydrogen-bond acceptor, it can enhance nucleophilicity of the N atom of anilines via hydrogen bonding with amino H atom. The nucleophilic attack of N atom of anilines on carbonyl C atom of polyesters results in cleavage of C─O bond of polymers and formation of the target products.

Microwave-assisted choline chloride/1,2-propanediol/methyl isobutyl ketone biphasic system for one-pot fractionation and valorization of Eucalyptus biomass

The developing of pretreatment method to break the biomass barrier of lignocellulosic is a challenging task for achieve high value utilization. A fast microwave-assisted choline chloride/1,2-propanediol/methyl isobutyl ketone biphasic system was constructed for pretreating Eucalyptus to the production of furfural and cellulose-rich residues and the extraction of lignin. Results showed that the combination of AlCl₃·6H₂O and HCl had the best catalytic ability for furfural production among the examined catalysts. Under the optimal conditions (140 °C, 15 min, 0.075 M AlCl₃·6H₂O, 0.05 M HCl), the furfural yield of 55.4 %, the glucose yield of 90.3 % and the delignification rate of 92.4 % could be achieved. Moreover, the extracted lignin samples with a low polydispersity (1.55-1.73) and molecular weight (1380-2040 g/mol) are promising to act as precursor for the value-add products processing. These findings demonstrated an ultrafast pretreatment process with excellent results in biomass fractionation and comprehensive utilization of biomass components.

A novel ternary deep eutectic solvent pretreatment for the efficient separation and conversion of high-quality gutta-percha, value-added lignin and monosaccharide from Eucommia ulmoides seed shells

A novel ternary deep eutectic solvent (DES), consisted of choline chloride, oxalic acid and ethylene glycol, was developed as a green, low-cost and recyclable pretreatment system for multi-stage utilization of Eucommia ulmoides seed shells. Under optimum conditions, 79.7 % hemicellulose and 65.6 % lignin were quickly removed while 84.0 % cellulose was retained. After DES pretreatment, the yield and purity of gutta-percha achieved 85.1 mg/g and 96.2 %, which increased 1.4 and 1.8 folds higher than that of un-treatment ones. Meanwhile, 69.1 % enzymatic digestibility of cellulose was obtained, that was 2.3 folds higher than that of raw substrates. Moreover, 53.6 % low-condensation lignin with aromatic structures and valuable aryl-ether linkages was well collected. Importantly, the DES that has been recycled five runs can still remove 73.9 % hemicellulose and 58.0 % lignin. Overall, the DES was determined to efficiently promote the separation and conversion of high-quality gutta-percha, value-added lignin and high-yield glucose from Eucommia ulmoides seed shells.

Optimization of softwood pretreatment by microwave-assisted deep eutectic solvents at high solids loading

Microwave-assisted deep eutectic solvent (DES) has received attention as an ultrafast pretreatment method in lignocellulose fractionation. This study investigated the improvement of milled softwood mixture (MSM) fractionation with chlorine chloride-formic acid (ChCl:FA) to obtain residues with high glucan retention and purity while removing majority of the lignin and hemicelluloses. At the optimum pretreatment conditions i.e., ChCl:FA (1:4), 140 °C, 14 min, 800 W and 15 % (w/v), 96.2 % hemicellulose removal, 90.1 % delignification and 93.5 % glucan retention were achieved. About 85 % lignin was recovered with a 95 % purity when solid loading was 10-20 % (w/v). This study showed that microwave assisted ChCl:FA pretreatment was a suitable means to fractionate MSM to achieve high quality glucan and lignin at high solid loading.

Highly efficient glucose production from raw non-pretreated Chinese medicinal herbal residues via the synergism of cellulase and amylolytic enzymes

Available literature on Chinese medicinal herbal residues (CMHRs) bioconversion highlights pretreatment prior to saccharification with cellulase without considering the presence of starch constituent. Herein, four commonly found CMHRs were tested for starch content, and it was found they all contained starch with content ranging from 4.74% to 16.78%. Hydrolysis of raw CMHRs with combined cellulase and amylolytic enzymes yielded increments of 16.85% to 26.51% in 48-h glucan conversion compared to cellulase alone. Further study showed 48-h glucan conversion of raw CMHRs outperformed that pretreated by water-ethanol successive extraction, ultrasound and acid, but underperformed alkali-pretreated CMHRs. Although increasing 48-h glucan conversion in the range of 7.40% to 24.10% compared to raw CMHRs, alkaline pretreatment demonstrated low glucose recovery and incurred additional cost, making it unfavorable. Saccharification of the four raw CMHRs with combined enzymes seems like a preferred option considering the elimination of high-cost pretreatment step.

Application and prospect of organic acid pretreatment in lignocellulosic biomass separation: A review

As a clean and efficient method of lignocellulosic biomass separation, organic acid pretreatment has attracted extensive research. Hemicellulose or lignin is selectively isolated and the cellulose structure is preserved. Effective fractionation of lignocellulosic biomass is achieved. The separation characteristics of hemicellulose or lignin by different organic acids were summarized. The organic acids of hemicellulose were separated into hydrogen ionized, autocatalytic and α-hydroxy acids according to the separation mechanism. The separation of lignin depends on the dissolution mechanism and spatial effect of organic acids. In addition, the challenges and prospects of organic acid pretreatment were analyzed. The separation of hemicellulose and enzymatic hydrolysis of cellulose were significantly affected by the polycondensation of lignin, which is effectively inhibited by the addition of green additives such as ketones or alcohols. Lignin separation was improved by developing a deep eutectic solvent treatment based on organic acid pretreatment. This work provides support for efficient cleaning of carbohydrate polymers and lignin to promote global carbon neutrality.

Enhanced Enzymatic Saccharification of Tomato Stalk by Combination Pretreatment with NaOH and ChCl:Urea-Thioure in One-Pot Manner

In this study, the mixture of NaOH and deep eutectic solvent (DES) ChCl:UA-TA was firstly used to pretreat waste tomato stalk (TS). The effects of pretreatment time, pretreatment temperature, NaOH dosage, and DES dose were investigated, and the synergistic effects of dilute NaOH and DES combination pretreatment were tested on the influence of enzymatic saccharification. It was found that the relationship between delignification and saccharification rate had a significant linear correction. When TS was pretreated with NaOH (7 wt%)–ChCl:UA-TA (8 wt%) in a solid-to-liquid ratio of 1:10 (wt:wt) at 75 °C for 60 min, the delignification reached 82.1%. The highest yield of reducing sugars from NaOH–ChCl:UA-TA-treated TS could reach 62.5% in an acetate buffer (50 mM, pH 4.8) system containing cellulase (10.0 FPU/g TS) and xylanase (30.0 CBU/g TS) at 50 °C. In summary, effective enzymatic saccharification of TS was developed by a combination pretreatment with dilute NaOH and ChCl:UA-TA, which has potential application in the future.

Pretreatment of Jerusalem artichoke stalk using hydroxylammonium ionic liquids and their influences on 2,3-butanediol fermentation by Bacillus subtilis

Pretreatment of lignocellulose is a vital step for biological production of bio-chemicals and bio-fuels. In this work, the pretreatment of Jerusalem artichoke stalk (JAS) by hydroxylammonium ionic liquids was evaluated based on pretreatment efficiency including polysaccharide recovery and enzymatic digestibility, and influence of ionic liquids on 2,3-butanediol fermentation using Bacillus subtilis. The results showed ethanolammonium acetate (EOAA) was efficient in JAS pretreatment, and maximum cell density was increased 25% when EOAA concentration was not greater than 0.3 mol/L in medium, while the total concentration of acetoin and 2,3-butanediol was 15% greater than the control at 0.1 mol/L EOAA. After the pretreatment under optimized conditions of 170 °C for 5-h and liquid-solid ratio of 18, about 87% cellulose and 75% hemicellulose were recovered, and glucose yield of 64% and xylose of 66% were obtained after 24-h hydrolysis of JAS residue by cellulase (15 FPU/g) with solid loading of 10 wt%.

Solvent effects on the wood delignification with sustainable solvents

Solutions of a pure organic solvent acidified with 1% sulfuric acid, and some of their aqueous mixtures were used for lignin extraction in the Pinus radiata sawdust delignification. Organic acid solvents including acetic, lactic and citric acids as well as non-acidic compounds such as γ-valerolactone, 2-methyltetrahydrofuran, glycerol and ethylene glycol were studied. Crude lignin extractions yields (%) ranging between ca. 5-50% were obtained, from which ethylene glycol (33%), γ-valerolactone (48%) and propylene carbonate (52%) showed the greatest effectiveness. The effect of added water on the lignin extraction was investigated in mixtures of an organic solvent with a variable water content (75%w/w, 50% w/w, 25%w/w and 10% w/w) where it was observed that the yield of extraction decreased with the increased water content. Moreover, the purity of extracted lignins were analyzed by spectroscopic methods (UV and IR). Kamlet-Taft solvent polarity parameters, were determined with the solvatochromic probes 4-nitroaniline, N,N-diethyl-4-nitroaniline, Nile Red and 6-propionyl-2-N,N-dimethylaminonaphthalene (PRODAN), and then correlated to lignin extraction yields to explain the influence of the solute-solvent interactions on biomass delignification. A reasonable correlation was found between the medium polarizability-dipolarity π* and the effectiveness of the solvent mixture on the extraction of lignin wood.

Microbial Biogas Production from Pork Gelatine

This research describes the results of the anaerobic digestion of gelatine as a potential hydrogen source with heat-shocked inoculum. The concentrations of applied gelatine were of VSS (volatile suspended solids) ranging from 10 g VSS/L to 30 g VSS/L. The initial process pH was 5.5, and, depending on the concentration, reached pH values from 7.5 to 7.8 after 55 days. Although the inoculum was heat-shocked in 30 g VSS/L of collagen, the process that occurred was hydrogenotrophic anaerobic digestion. In gelatine concentrations below 30 g VSS/L, hydrogen production was dominant only during the first 5 days of the experiments. Then, there was a change from dark fermentation to hydrogenotrophic methane production. The optimal hydrogen and methane yields resulted from the concentrations of 10 g VSS/L (7.65 mL ± 0.01 mL H2/g VSS and 3.49 ± 0.01 L CH4/g VSS). Additionally, 10 g VSS/L had the lowest accumulated emission of hydrogen sulphide (10.3 ± 0.01 mL of H2S), while 30 g VSS/L (0.440 ± 0.01mL H2S/g VSS) produced the lowest yield. After a lag time, the hydrogen production and hydrogen sulphide grew with a specific ratio, depending on the concentration. The hydrogen sulphide emission and sulphur added analysis proved that hydrogen sulphide originating from biogas created by bacteria remains longer than that from a substrate.

Highly-efficient pretreatment using alkaline enhanced aqueous deep eutectic solvent to unlock poplar for high yield of fermentable sugars: Synergistic removal of lignin and mannan

Herein, a short-time alkaline enhanced aqueous DES (AaDES) pretreatment using choline chloride/ethylene glycol was reported, aiming at enhancing cellulose and xylan enzymatic digestibility. Simultaneously, saccharification efficiency of cellulose and xylan was reached to 91.2% and 99.0%, respectively, ∼4 and ∼ 24 times that of raw poplar. Pretreatment time was substantially shortened from 15-24 h to 4 h. Notably, 43.00 kg fermentable sugars (73% of the theoretical maximum) and 12.98 kg lignin with rich β-O-4' linkages were obtained based on 100 kg poplar. The complete removal of acetyl and partial removal of lignin and mannan contributed to excellent pretreatment performance. It was found that enzymatic digestibility of xylan/cellulose was positively correlated with removal of mannan (R² = 0.9719; R² = 0.9010) and delignification (R² = 0.6888; R² = 0.8293). Drastic reduction in pretreatment time along with high-yield sugars in AaDES system will provide strength towards industrial level biorefinery.

L-Proline-Based Natural Deep Eutectic Solvents as Efficient Solvents and Catalysts for the Ultrasound-Assisted Synthesis of Aurones via Knoevenagel Condensation

Aurones are minor flavonoids that possess a wide variety of bioactivity, including antioxidant, anticancer, and enzyme inhibitory activity. L-proline-based natural deep eutectic solvents (NaDES) were synthesized and applied as solvents and catalysts for the Knoevenagel condensation reaction between benzofuranone and substituted benzaldehydes to produce aurones in high yields and purity. The reaction between benzofuranone and vanillin served as the model reaction. After screening three NaDESs, and testing microwave, as well as ultrasound as energy sources, we concluded that the optimum results are obtained using L-proline/glycerol 1:2 as catalyst and solvent and ultrasound irradiation. The scope of the reaction was evaluated using a variety of benzaldehydes, and the corresponding aurones were obtained in moderate to satisfactory yields (57–89%) and high purity. An important additional feature of the described methodology is the recyclability and reusability of the NaDES, which was recycled and effectively reused after 6 cycles.

Microwave-assisted extraction of lignin from coconut coir using deep eutectic solvents and its valorization to aromatics

Lignin is a rich renewable source of aromatics present in lignocellulosic biomass (LCB). The extraction of lignin from the intricate LCB network is a challenging task for successful commercialization of sustainable biorefineries. In the present study, a series of choline chloride (ChCl)-carboxylic acid based deep eutectic solvents (DESs) were used for the extraction of lignin from coconut coir under microwave irradiation. Among the synthesized DESs, ChCl: lactic acid (LA) (1:4) gave the highest lignin yield of 82% with >95% purity. Interestingly, the severity factor (H factor) for the pretreatment process was found to be a significantly lower (55.5) as compared to reported studies due to efficient microwave heating. Moreover, the DES showed good recyclability for four recycle runs thus making it a promising candidate for the delignification of LCB. Finally, the extracted lignin was converted to aromatics via catalytic transfer hydrogenation (CTH) using Ru/C and isopropanol as in-situ hydrogen donor.

A review on physico-chemical delignification as a pretreatment of lignocellulosic biomass for enhanced bioconversion

Effective pretreatment of lignocellulosic biomass (LCB) is one of the most important steps in biorefinery, ensuring the quality and commercial viability of the overall bioprocess. Lignin recalcitrance in LCB is a major bottleneck in biological conversion as the polymerization of lignin with hemicellulose hinders enzyme accessibility and further bioconversion to fuels and chemicals. Therefore, there is a need to delignify LCB to ease further bioprocessing. The efficiency of delignification, quality and quantity of the desired products, and generation of inhibitors depend upon the type of pretreatment employed. This review summarizes different single and integrated physicochemical pretreatments for delignification. Additionally, conditions required for effective delignification and the advantages and drawbacks of each method were evaluated. Advances in overcoming the recalcitrance of residual lignin to saccharification and the methods to recover lignin after delignification are also discussed. Efficient lignin recovery and valorization strategies provide an avenue for the sustainable lignocellulose biorefinery.

Evaluation of pretreatment effect on lignin extraction from wheat straw by deep eutectic solvent

To investigate the effect of hemicellulose removal on subsequent choline chloride and lactic acid (ChCl-LA) based deep eutectic solvent (DES) extraction of wheat straw lignin, ChCL-LA of DES and hot water presoaking pretreatments were used for hemicellulose prehydrolysis. Both presoakings led to a significant hemicellulose removal and introduced morphological changes on fiber cell wall surface. DES presoaking also instigated ether bonds cleavage between lignin and hemicellulose and selectively removed lignin in compound middle lamella (CML) and cell corner (CC) leading to cell wall disruption and swelling which facilitated lignin extraction. Hot water presoaking removed more hemicellulose and caused a migration of lignin to fibers surface, but did not improve subsequent lignin extraction. This study demonstrated that a two-stage DES treatment method, presoaking at room temperature followed by extracting at an elevated temperature, is a viable process to produce high yield and purity of lignin.

Application of Extraction and Determination Based on Deep Eutectic Solvents in Different Types of Environmental Samples

Water sources are an indispensable resource for human survival. Monitoring the pollution status of the surrounding environment is necessary to protect water sources. Research on the environmental matrix of deep eutectic solvents (DESs) has expanded rapidly because of their high extraction efficiency for various target analytes, controllable synthesis, and versatile structure. Following the synthesis of hydrophobic deep eutectic solvents (HDESs), their application in aqueous matrices broadened greatly. The present review conducted a survey on the pollutant extraction methods based DESs in environmental matrices from two aspects, application methods and matrix types; discussed the potential risk of DESs to the environment and future development trends; and provided some references for researchers to choose DES-based extraction methods for environmental research.

Enhanced enzymatic saccharification of sorghum straw by effective delignification via combined pretreatment with alkali extraction and deep eutectic solvent soaking

Hydrogen bond donor (HBD) in ChCl-based deep eutectic solvent (DESs) had significant influence on the Sorghum straw (SS) pretreatment. Lactic acid (LAC) was chosen as the appropriate HBD for preparing ChCl-based DES to pretreat Sorghum straw (SS). Furthermore, sequential pretreatment with dilute sodium hydroxide (0.75 wt%) for 1 h at 121 °C and ChCl:LAC soaking at 140 °C for 40 min was applied to pretreat SS for removing lignin (78.4%) and xylan (67.6%). Hydrolysis for 72 h, the reducing sugar yield reached 94.9%. Moreover, relationships of delignification and xylan removal with saccharification were explored after pretreatment. Finally, the fermentability of SS-hydrolysates was verified by bioethanol fermentation by S. cerevissiae with the yield of 0.45 g ethanol/g glucose. No significant inhibition was observed on ethanol fermentation. Obviously, establishment of high-efficient combination pretreatment with alkali extraction and ChCl:LAC soaking was successfully demonstrated for enhancing enzymatic saccharification of SS.