Nitrogen and 17β-Estradiol level regulate Thermosynechococcus sp. CL-1 carbon dioxide fixation, monosaccharide production, and estrogen degradation

Thermophilic cyanobacteria-exciting, yet challenging biotechnological chassis

Thermophilic cyanobacteria are prokaryotic photoautotrophic microorganisms capable of growth between 45 and 73 °C. They are typically found in hot springs where they serve as essential primary producers. Several key features make these robust photosynthetic microbes biotechnologically relevant. These are highly stable proteins and their complexes, the ability to actively transport and concentrate inorganic carbon and other nutrients, to serve as gene donors, microbial cell factories, and sources of bioactive metabolites. A thorough investigation of the recent progress in thermophilic cyanobacteria reveals a significant increase in the number of newly isolated and delineated organisms and wide application of thermophilic light-harvesting components in biohybrid devices. Yet despite these achievements, there are still deficiencies at the high-end of the biotechnological learning curve, notably in genetic engineering and gene editing. Thermostable proteins could be more widely employed, and an extensive pool of newly available genetic data could be better utilised. In this manuscript, we attempt to showcase the most important recent advances in thermophilic cyanobacterial biotechnology and provide an overview of the future direction of the field and challenges that need to be overcome before thermophilic cyanobacterial biotechnology can bridge the gap with highly advanced biotechnology of their mesophilic counterparts. KEY POINTS: • Increased interest in all aspects of thermophilic cyanobacteria in recent years • Light harvesting components remain the most biotechnologically relevant • Lack of reliable molecular biology tools hinders further development of the chassis.

Bioprospecting photosynthetic microorganisms for the removal of endocrine disruptor compounds

Endocrine disruption compounds can be found in various daily products, like pesticides, along with cosmetic and pharmaceutical commodities. Moreover, occurrence of EDCs in the wastewater alarms the urgency for their removal before discharge owing to the harmful effect for the environment and human health. Compared to implementation of physical and chemical strategies, cultivation of photosynthetic microorganisms has been acknowledged for their high efficiency and eco-friendly process in EDCs removal along with accumulation of valuable byproducts. During the process, photosynthetic microorganisms remove EDCs via photodegradation, bio-adsorption, -accumulation, and -degradation. Regarding their high tolerance in extreme environment, photosynthetic microorganisms have high feasibility for implementation in wastewater treatment plant. However, several considerations are critical for their scaling up process. This review discussed the potency of EDCs removal by photosynthetic microorganisms and focused on the efficiency, mechanism, challenge, along with the prospect. Details on the mechanism's pathway, accumulation of valuable byproducts, and recent progress in scaling up and application in real wastewater were also projected in this review.

Exploring the molecular mechanism of Chlorella vulgaris in response to androstenedione exposure based on genes continuously up-regulated in transcription analysis

Androstenedione (ADSD) is one of the widely detected androgens in diverse aquatic environments. However, there were few reports on the molecular mechanism of Chlorella vulgaris exposure to ADSD. In our previous research, we have investigated the genes associated with chlorophyll metabolism in Chlorella vulgaris response to ADSD. In this study, we focus on continuously up-regulated genes to explore the mechanism underlying Chlorella vulgaris resistance to ADSD toxicity. Chlorella vulgaris was exposed to ADSD with five concentration gradients. The continuously up-regulated genes were enriched by Series Test of Cluster (STC) analysis and verified by qRT-PCR. Microalgae Super Oxidase Dimutase (SOD) and Microalgae Malonic dialdehyde (MDA), two indicators of oxidative stress, were determined by ELISA after exposure to ADSD. The results showed that ADSD can stimulate the production of extracellular polymeric substances (EPS) and lead to enlargement in the cell body of Chlorella vulgaris. In addition, steroid biosynthesis and oxidoreductase activity processes were consistently up-regulated upon exposure to ADSD. In conclusion, our study highlighted the crucial role of phenotypic modification, hormone synthesis, and redox mechanisms in protecting Chlorella vulgaris cells from the harmful effects of ADSD contamination.

3D printed stir bar sorptive extraction coupled with high performance liquid chromatography for trace estrogens analysis in environmental water samples

BACKGROUND

Any imaginary shape with good preparation reproducibility can be made by 3D printing technology, and it has been applied in various fields. Comparatively, its applications in sample pre-treatment are relatively less, most of which involves making extraction sorbents and producing non-functionalized devices for support assistance. 3D printing has not been applied to fabricate stir bars in stir bar sorptive extraction, mainly due to the lacking of suitable printing feedstocks. This work aimed to fabricate stir bars by 3D printing, reducing the manufacturing cost and steps and improving preparation reproducibility. (90) RESULTS: By using fused deposition modeling technique and porous filament printing feedstock, stir bars were fabricated without any modifications. Adsorption performance of 3D printed stir bars were investigated for substances with different structures and polarities. Five estrogens with adsorption efficiencies of over 80 % were selected as the representatives. The 3D printed stir bars exhibited good preparation reproducibility (2.9-4.4 %) and higher extraction recoveries (73-81 %) for five estrogens than commercial polydimethylsiloxane coated stir bars (13-69 %) in a shorter time (90 vs 120 min). They showed long lifespan (160 times) with good mechanical properties and merited reduced manufacturing cost (0.064 $ per bar) and manual operation. A method of stir bar sorptive extraction coupled with high performance liquid chromatography was proposed for trace analysis of estrogens in environmental water. Under the optimized conditions, the linear ranges for estrogens were 0.5-200 μg/L with LODs of 0.13-0.17 μg/L. (136) SIGNIFICANCE: The feasibility of fused deposition modeling in stir bar fabrication was demonstrated, along with the potential of porous filament printing feedstock as the sorbent for substances with medium polarity. 3D printed stir bars were featured with excellent preparation reproducibility, long lifespan, and good mechanical properties. The stir bar fabrication method can be used for mass production with minimal differences in products performance. (62).

Sorption kinetics, isotherms and molecular dynamics simulation of 17β-estradiol onto microplastics

Microplastic is a new type of pollutant, which can act as a carrier for organic contaminants. It affects the migration and bioavailability of chemicals and potentially threatens the ecology. This work investigated the adsorption kinetics, isotherm and influencing factors of 17β-estradiol (E2) on three dominate microplastics. Then, used molecular dynamics (MD) simulation to analyze the adsorption mechanism. The results showed that E2 adsorption onto microplastics conformed well to the Pseudo-second-order kinetics and Redlich-Petersen isotherm model. The adsorption capacity of E2 on microplastics was polyethylene (PE) > polypropylene (PP) > polystyrene (PS). The small particle size of microplastics was conducive to the adsorption due to its large specific surface area. The thermodynamic parameters demonstrated the adsorption of E2 was a spontaneous and exothermic process, so low temperature was benefit for the adsorption. The MD simulation results indicated the adsorption of E2 on MPs belonged to surface adsorption. The order of E2 adsorption energy by three microplastics obtained by molecular dynamics simulation is consistent with the experimental results. This work may help to understand the molecular adsorption process and provide a theoretical basis for the combined ecotoxicity of microplastics.

Weighted gene Co-expression network analysis (WGCNA) reveals a set of hub genes related to chlorophyll metabolism process in chlorella (Chlorella vulgaris) response androstenedione

Androstenedione (ADSD) was the main androgen detected in wastewaters. Chlorella was the most widely used plant in biological wastewater treatment process. In order to understand the toxicological response of chlorella to ADSD contamination, we used the weighted gene co-expression network analysis (WGCNA) method to systematically analyze the gene regulatory networks of chlorella after ADSD treatments. Total of 25 modules was identified from gene co-expression networks, and the turquoise module were selected for GO and KEGG enrichment analysis. Results showed that most hub genes were associated with chloroplast organizations or photosystems processes. Among them, the expressions profiles of hcar, nol, pao and sgr genes were highly correlated to the content fluctuations of chlorophylls after different ADSD treatments. All these results demonstrated that chlorophylls play a key role in preventing cell damage of chlorella caused by ADSD contamination. Besides, we proposed a possible chlorophyll metabolism pathway in chlorella response to ADSD contamination.

Simultaneous 17β-estradiol degradation, carbon dioxide fixation, and carotenoid accumulation by Thermosynechococcus sp. CL-1

Thermosynechococcus sp. CL-1 (TCL-1) has a high potency to utilize CO₂ under extreme conditions including high temperature, alkaline condition, and the occurrence of 17β-estradiol (E2). In this study, TCL-1 cultivation with E2 addition in the range of 0-20 mg/L was combined with various growth arrangements (light intensity and dissolved inorganic nitrogen/DIN level). After 120 h cultivation, the 1.0 mg/L E2, 200 µmol photons/m²/s light intensity, and 5.8 mM available nitrogen performed the best growth with 4.58 ± 0.18 mg/L/h biomass productivity, 94.9 ± 3.3% total estrogen removal, and 11.41 ± 0.11 mg/L/h CO₂ fixation rate. Estrogen degradation was mainly carried out by biodegradation route which started from E2 conversion into estrone/E1 and with only 4-6% influence from the abiotic factors. Compared with the accumulated zeaxanthin, β-carotene was dominantly generated with a productivity of 0.043 ± 0.019 mg/L/h. Therefore, TCL-1 cultivation is an efficient strategy for simultaneous CO₂ fixation, estrogen removal, and carotenoid accumulation as valuable byproducts.

Bioaugmented removal of 17β-estradiol, nitrate and Mn(II) by polypyrrole@corn cob immobilized bioreactor: Performance optimization, mechanism, and microbial community response

The coexistence of nitrate and endocrine substances (EDCs) in groundwater is of global concern. Herein, an efficient and stable polypyrrole@corn cob (PPy@Corn cob) bioreactor immobilized with Zoogloea sp. was designed for the simultaneous removal of 17β-estradiol (E2), nitrate and Mn(II). After 225 days of continuous operation, the optimal operating parameters and enhanced removal mechanism were explored, also the long-term toxicity and microbial communities response mechanisms under E2 stress were comprehensively evaluated. The results showed that the removal efficiencies of E2, nitrate, and Mn(II) were 84.21, 82.96, and 47.91%, respectively, at the optimal operating conditions with hydraulic retention time (HRT) of 8 h, pH of 6.5 and Mn(II) concentration of 20 mg L^-1. Further increased of initial E2 (2 and 3 mg L^-1) resulted in the inhibiting effect of denitrification and manganese oxidation, but excellent E2 removal efficiencies maintained, which were associated with the formation and continuous accumulation of biomanganese oxides (BMO). Characterization analysis of biological precipitation demonstrated that adsorption and redox conversion on the BMO surface played key roles in the removal of E2. In addition, different levels of E2 exposure are decisive factors in community evolution, and bioaugmented bacterial communities with Zoogloea as the core group can dynamically adapt to E2 stress. This study offers the possibility to better utilize microbial metabolism and to advance opportunities that depend on microbial physiology and material characterization applications.