Monochromatic light filters to enhance biomass and carotenoid productivities of Dunaliella salina in raceway ponds

Enhancing crop yields to ensure food security by optimizing photosynthesis

The crop yields achieved through traditional plant breeding techniques appear to be nearing a plateau. Therefore, it is essential to accelerate advancements in photosynthesis, the fundamental process by which plants convert light energy into chemical energy, to further enhance crop yields. Research focused on improving photosynthesis holds significant promise for increasing sustainable agricultural productivity and addressing challenges related to global food security. This review examines the latest advancements and strategies aimed at boosting crop yields by enhancing photosynthetic efficiency. There has been a linear increase in yield over the years in historically released germplasm selected through traditional breeding methods, and this increase is accompanied by improved photosynthesis. We explore various aspects of the light reactions designed to enhance crop yield, including light harvest efficiency through smart canopy systems, expanding the absorbed light spectrum to include far-red light, optimizing non-photochemical quenching, and accelerating electron transport flux. At the same time, we investigate carbon reactions that can enhance crop yield, such as manipulating Rubisco activity, improving the Calvin-Benson-Bassham (CBB) cycle, introducing CO2 concentrating mechanisms (CCMs) in C3 plants, and optimizing carbon allocation. These strategies could significantly impact crop yield enhancement and help bridge the yield gap.

Study on Synthesis and Regulation of PPVI and PPVII in Paris polyphylla with UV

Paris polyphylla Smith var. Chinensis (Franch.) Hara is a medicinal plant that belongs to the Liliaceae family. Its main components are parissaponins, which have excellent medicinal effects such as anti-inflammatory, anti-tumor, etc. Improving the quality of parissaponins through artificial directional regulation has emerged as a practice to meet medical demand and is a new research hotspot. In this paper, P. polyphylla plants were treated with UVA, UVB, and UVC, and the contents of PolyPhyllin VI (PPVI) and PolyPhyllin VII (PPVII), saponin synthase (squalene synthase, SS; cycloartenol synthase, CAS; cytochrome P450, CYP450; and glycosyl transferases, GT) activity, MDA, and the photosynthetic pigment indexes were measured and analyzed. The results showed that PPVII content increased by 32.43% with UVC treatment after 4 h (3.43 mg/g), but the PPVI and PPVII contents in the other groups decreased compared with CK (control group) and they did not return to the original level after 4 h. SS, CAS, CYP450, and GT synthases were activated in varying degrees via UV treatment and increased, respectively, by 22.93%, 10.83%, 20.15%, and 25.98%. Among them, GT, as the last of the synthetases, had a shorter response time to UVB (30 min) and UVC (15 min); the difference was sensible compared with CK. Moreover, UV had a stressing effect and promoted the rapid accumulation of MDA content (increased 17.66%, 34.53%, and 9.65%) and carotenoid (increased 7.58, 5.60, and 7.76 times) within 4 h compared to CK. UVB and UVC radiation visibly improved chlorophyll a content (42.56% and 35.45%), but UVA did not, and the change in chlorophyll b content showed no overt statistical difference. In addition, PPVI and PPVII were negatively correlated with SS, CAS, carotenoids, and MDA (p < 0.05) and positively correlated with CYP450, GT, and chlorophyll a (p < 0.05). This study provides a theoretical basis for using UV light to regulate secondary metabolism in P. polyphylla, which is of great value for production management.

Dicyanopyridine derivatives: One-pot preparation, ACQ-to-AIE transformation, light-conversion quality and photostability

Low cost and strong fluorescence emission are two important guarantees for luminogens used as light conversion agents. By one-pot multicomponent approach and inexpensive starting materials, three dicyanopyridine (DP) derivatives named as DCP (2-amino-6-methoxy-4-phenylpyridine-3,5-dicarbonitrile), DCO (2-amino-6-methoxy-4-(4-methoxyphenyl) pyridine-3,5-dicarbonitrile) and DCC (2-amino-4-(4-cyanophenyl)-6-methoxypyridine-3,5-dicarbonitrile) were designed and synthesized. Meanwhile, the ACQ-to-AIE transformation was successfully realized by altering substituent groups rather than traditional rotor-stator theory. Based on crystal analysis and theoretical calculations, the ACQ-to-AIE transformation is attributed to the tunable stacking modes and intermolecular weak interactions. Owing to matched fluorescence emission, low lost, high yield, and AIE activity, DCC is used as light conversion agents and doped in EVA matrix. The light conversion quality confirms that DCC can not only convert ultraviolet light, but also significantly improve the transmittance of 25 %/40 % EVA, whose photosynthetic photon flux density at 400-500 nm and 600-700 nm increased to 30.67 %/30.21 % and 25.37 %/37.82 % of the blank film, respectively. After 20 h of UV irradiation (365 nm, 40 W), the fluorescence intensities of DCC films can maintain 92 % of the initial values, indicating good photostability in the doping films. This work not only provides an excellent and low-cost light conversion agent, but also has important significance for ACQ-to-AIE transformation of luminogens.

Effects of light quality on microalgae cultivation: bibliometric analysis, mini-review, and regulation approaches

The ever-increasing concern for energy shortages and greenhouse effect has triggered the development of sustainable green technologies. Microalgae have received more attention due to the characteristics of biofuel production and CO2 fixation. From the perspective of autotrophic growth, the optimization of light quality has the potential to promote biomass production and bio-component accumulation in microalgae at low cost. In this study, bibliometric analysis was used to describe the basic features, identify the hotspots, and predict future trends of the research related to the light quality on microalgae cultivation. In addition, a mini-review referring to regulation methods of light quality was provided to optimize the framework of research. Results demonstrated that China has the greatest interest in this area. The destination of most research was to obtain biofuels and high-value-added products. Both blue and red lights were identified as the crucial spectrums for microalgae cultivation. However, sunlight is the most affordable light resource, which could not be fully utilized by microalgae through the photosynthetic process. Hence, some regulation approaches (e.g., dyes, plasmonic scattering, and carbon-based quantum dots) are proposed to increase the proportion of beneficial spectrum for enhancement of photosynthetic efficiency. In summary, this review introduces state-of-the-art research and provides theoretical guidance for light quality optimization in microalgae cultivation to obtain more benefits.

Sustainable treatment of primary and secondary effluent by algal-bacterial flocculent biomass in raceway ponds

Two 5.5-L raceway open ponds were used to evaluate the removal of organic material and nutrients from wastewater. Algal-bacterial flocs were placed in the ponds to treat primary and secondary effluent. The organic loading rate ranged from 29 to 95 and 9 to 38 g sCOD m^-3 d^-1 for the reactor fed with primary and secondary effluent, respectively. The hydraulic retention time (HRT) gradually decreased in both reactors from 5.5 to 2.2 d during a period of 21 days, and after that, both reactors operated at an HRT of 1.1 d. A high biomass concentration of around 2.2 g L^-1 was sustained using primary and secondary effluent after 130 days. The biomass, developed with both substrates was very active and completely removed organic material and nutrients in less than 12 h. The algal-bacteria biomass had excellent settling properties and could settle in less than 10 min.

Technological readiness of commercial microalgae species for foods

Microalgae have great potential as a future source to meet the increasing global demand for foods. Several microalgae are permitted as safety sources in different countries and regions, and processed as commercial products. However, edible safety, economic feasibility, and acceptable taste are the main challenges for microalgal application in the food industry. Overcome such challenges by developing technology accelerates transition of microalgae into sustainable and nutritious diets. In this review, edible safety of Spirulina, Chlamydomonas reinhardtii, Chlorella, Haematococcus pluvialis, Dunaliella salina, Schizochytrium and Nannochloropsis is introduced, and health benefits of microalgae-derived carotenoids, amino acids, and fatty acids are discussed. Technologies of adaptive laboratory evolution, kinetic model, bioreactor design and genetic engineering are proposed to improve the organoleptic traits and economic feasibility of microalgae. Then, current technologies of decoloration and de-fishy are summarized to provide options for processing. Novel technologies of extrusion cooking, delivery systems, and 3D bioprinting are suggested to improve food quality. The production costs, biomass values, and markets of microalgal products are analyzed to reveal the economic feasibility of microalgal production. Finally, challenges and future perspectives are proposed. Social acceptance is the major limitation of microalgae-derived foods, and further efforts are required toward the improvement of processing technology.

Accurate assessment of the effect of Rhodamine 6G solution as a spectral converter on biomass production of microalgae Chlorella sp., nitrate uptake, and energy consumption by the light source

Spectral conversion of light introduced as a new technique to manage incoming light photons into the culture medium of photosynthetic microorganisms which can increase biomass production. In this work, a much more accurate value of the effect of spectral conversion on the growth of Chlorella sp. was obtained. For this purpose, the light source and Rhodamine 6G solution, as a spectral converter, was placed in the center of the culture flask, which was covered with aluminum foil. The loss of photons was largely avoided due to the additional homogeneous distribution of light. Modification of white light using the solution has increased biomass productivity up to 300%. Also, for biomass productivity of 1 mg L^-1 day^-1, the energy consumption of the white light source was reduced up to 75%. Nitrate uptake has also increased up to 28%, and intracellular lipid content has decreased, as well.

Aquaculture sustainability through alternative dietary ingredients: Microalgal value-added products

Aquaculture contributes remarkably to the global economy and food security through seafood production, an important part of the global food supply chain. The success of this industry depends heavily on aquafeeds, and the nutritional composition of the feed is an important factor for the quality, productivity, and profitability of aquaculture species. The sustainability of the aquaculture industry depends on the accessibility of quality feed ingredients, such as fishmeal and fish oil. These traditional feedstuffs are under increasing significant pressure due to the rapid expansion of aquaculture for human consumption and the decline of natural fish harvest. In this review, we evaluated the development of microalgal molecules in aquaculture and expanded the use of these high-value compounds in the production of aquaculture diets. Microalgae-derived functional ingredients emerged as one of the promising alternatives for aquafeed production with positive health benefits. Several compounds found in microalgae, including carotenoids (lutein, astaxanthin, and β-carotene), essential amino acids (leucine, valine, and threonine), β-1-3-glucan, essential oils (docosahexaenoic acid and eicosapentaenoic acid), minerals, and vitamins, are of high nutritional value to aquaculture.

Novel effective bioprocess for optimal CO2 fixation via microalgae-based biomineralization under semi-continuous culture

In this study, the effects of microalgae-based biomineralization in a semi-continuous process (M-BSP) on biomass productivity and CO2 fixation rate were investigated. M-BSP significantly improved biomass production and CO2 fixation rate at the second stage of induction by sustaining relatively high photosynthetic rate without exposure to toxic substances (e.g., chlorellin) from aging cells using the microalgae Chlorella HS2. In conventional systems, cells do not receive irradiated light evenly, and many cells age and burst because of the long culture period. In contrast, in the M-BSP, the photosynthesis efficiency increases and biomass production is not inhibited because most of the cells can be harvested during shorter culture period. The accumulated biomass production and CO2 fixation rate of the HS2 cells cultured under M-BSP increased by 4.67- (25 ± 1.09 g/L) and 10.9-fold (30.29 ± 1.79 g/L day-1), respectively, compared to those cultured without the CaCl2 treatment.

Critical assessment of protozoa contamination and control measures in mass culture of the diatom Phaeodactylum tricornutum

The diatom Phaeodactylum tricornutum is considered a promising "cell factory" for high-value products fucoxanthin and EPA. But its potential has not been realized due largely to microbial contamination. In this study, seven protozoan strains were identified, of which a heterolobosean amoeba was identified as the most frequently occurring and destructive predator in P. tricornutum culture. The addition of 400 mg L^-1 NH₄HCO₃ inhibited amoeba proliferation with little impact on algal growth. Halting culture mixing at night induced a hypoxia environment that further inhibited amoeba growth. Regardless of culture systems employed, a periodical supply of proper amounts of NH₄HCO₃ alone or in combination with halting culture mixing at night may prevent or treat protozoa contamination in mass culture of P. tricornutum.

Pulsed light of near-infrared and visible light wavelengths induces the accumulation of carotenoids in tomato fruits during post-treatment time

Pulsed light (PL) is proposed as a novel strategy for the food industry to enhance the antioxidant potential of fruits and vegetables for industrial uses. The main aim of this work is to evaluate the impact of postharvest PL treatments of different spectral ranges on the carotenoid concentration as well as quality attributes of tomatoes during post-treatment time. Doses of wide-spectrum light (180-1100 nm), full-spectrum without ultraviolet (UV)-C wavelengths (305-1100 nm), and visible (VIS) + near-infrared light (NIR) (400-1100 nm) were compared. Total carotenoids, lycopene, and chlorophyll contents were spectrophotometrically assessed just after treatments and 1, 5, and 10 days post-treatment. PL treatments accelerated the accumulation of both total carotenoids and lycopene concentrations in tomato fruits. Nevertheless, the efficacy of PL depended on the applied spectral range. Tomato subjected to VIS + NIR treatment exhibited the greatest enhancement in total carotenoids (31 %) and lycopene (35 %) content at day 5 post-treatment and quality attributes were not affected. Conversely, UV-light exposure did not enhance carotenoid concentrations. These results evidenced that VIS + NIR treatments induced a faster accumulation of carotenoids without negatively affecting tomato quality attributes. PRACTICAL APPLICATION: The integration of visible and near-infrared (VIS + NIR) light filters in pulsed light (PL) processing allows enhancing the accumulation of bioactive compounds in tomato tissues in a sustainable way, which can be processed to obtain derived products (e.g., juices, purees) with health-promoting properties. PL technology is characterized by a lack of residual compounds and the absence of applying chemicals potentially harmful to humans. Industries can attract the attention of consumers through their application, which allows offering this added value.

Regulation of Light Spectra on Cell Division of the Unicellular Green Alga Haematococcus pluvialis: Insights from Physiological and Lipidomic Analysis

Commercial scale production of natural astaxanthin is currently conducted through cultivation of the green alga Haematococcus pluvialis. This study comprehensively investigated the impact of seven different light spectra on the growth, morphology and photosynthesis of H. pluvialis vegetative cells. Further, the lipidomes of vegetative H. pluvialis grown under various light spectra were qualitatively and quantitatively analyzed using liquid chromatography/mass spectrometry (LC/MS). The results showed the existence of blue light—alone or with red light—promoted cell division, while pure red light or white light enabled increased cell sizes, cellular pigment, starch and lipid contents, and biomass production. Although the photosynthetic performance of H. pluvialis measured as chlorophyll a fluorescence was not significantly affected by light spectra, the lipid profiles, particularly chloroplast membrane lipids, showed remarkable changes with light spectra. The contents of most lipid species in the blue/red light 1/2 group, which showed the fastest cell division, remained at a moderate level compared with those under other light spectra, indicating the fastest dividing cells were featured by a fine-tuned lipid profile. From biotechnical perspective, this comprehensive study can provide insights into the development of appropriate light regimes to promote the cell density or biomass of H. pluvialis mass culture.

Microalgal Biomass as Feedstock for Bacterial Production of PHA: Advances and Future Prospects

The search for biodegradable plastics has become the focus in combating the global plastic pollution crisis. Polyhydroxyalkanoates (PHAs) are renewable substitutes to petroleum-based plastics with the ability to completely mineralize in soil, compost, and marine environments. The preferred choice of PHA synthesis is from bacteria or archaea. However, microbial production of PHAs faces a major drawback due to high production costs attributed to the high price of organic substrates as compared to synthetic plastics. As such, microalgal biomass presents a low-cost solution as feedstock for PHA synthesis. Photoautotrophic microalgae are ubiquitous in our ecosystem and thrive from utilizing easily accessible light, carbon dioxide and inorganic nutrients. Biomass production from microalgae offers advantages that include high yields, effective carbon dioxide capture, efficient treatment of effluents and the usage of infertile land. Nevertheless, the success of large-scale PHA synthesis using microalgal biomass faces constraints that encompass the entire flow of the microalgal biomass production, i.e., from molecular aspects of the microalgae to cultivation conditions to harvesting and drying microalgal biomass along with the conversion of the biomass into PHA. This review discusses approaches such as optimization of growth conditions, improvement of the microalgal biomass manufacturing technologies as well as the genetic engineering of both microalgae and PHA-producing bacteria with the purpose of refining PHA production from microalgal biomass.

Optimization of Extraction Conditions of Carotenoids from Dunaliella parva by Response Surface Methodology

Extraction conditions can exert a remarkable influence on extraction efficiency. The aim of this study was to improve the extraction efficiency of carotenoids from Dunaliella parva (D. parva). Dimethyl sulfoxide (DMSO) and 95% ethanol were used as the extraction solvents. The extraction time, extraction temperature and the proportions of mixed solvent were taken as influencing factors, and the experimental scheme was determined by Central Composite Design (CCD) of Design Expert 10.0.4.0 to optimize the extraction process of carotenoids from D. parva. The absorbance values of the extract at 665 nm, 649 nm and 480 nm were determined by a microplate spectrophotometer, and the extraction efficiency of carotenoids was calculated. Analyses of the model fitting degree, variance and interaction term 3D surface were performed by response surface analysis. The optimal extraction conditions were as follows: extraction time of 20 min, extraction temperature of 40 °C, and a mixed solvent ratio (DMSO: 95% ethanol) of 3.64:1. Under the optimal conditions, the actual extraction efficiency of carotenoids was 0.0464%, which was increased by 18.19% (the initial extraction efficiency of 0.03926%) with a lower extraction temperature (i.e., lower energy consumption) compared to the standard protocol.