Enhanced treatment of organic matters in starch wastewater through Bacillus subtilis strain with polyethylene glycol-modified polyvinyl alcohol/sodium alginate hydrogel microspheres

Enhancing nitrogen removal performance using immobilized aerobic denitrifying bacteria by modified polyvinyl alcohol/sodium alginate (PVA/SA)

Aerobic denitrification has emerged as a promising and efficient method for nitrogen removal from wastewater. However, the direct application of aerobic denitrifying bacteria has faced challenges such as low nitrogen removal efficiency, bacterial loss, and poor stability. To address these issues, this study developed a novel microbial particle carrier using NaHCO3-modified polyvinyl alcohol (PVA)/sodium alginate (SA) gel (NaHCO3-PVA/SA). This carrier exhibits several advantageous properties, including excellent mass transfer efficiency, favorable biocompatibility, convenient film formation, abundant biomass, and exceptional pollutant treatment capacity. The carrier was modified with 0.3% NaHCO3, 8.0% PVA, and 1.0% SA, resulting in a remarkable 3.4-fold increase in the average pore diameter and a 12.8% improvement in mass transfer efficiency. This carrier was utilized to immobilize the aerobic denitrifying bacterium Stutzerimonas stutzeri W-2 to enhance nitrogen removal (NaHCO3-PVA/SA@W-2), resulting in a NO3--N removal efficiency of 99.06%, which was 21.39% higher than that without modification. Compared with the non-immobilized W-2, the degradation efficiency was improved by 43.70%. After five reuses, the NO3--N and TN removal rates remained at 99% and 93.01%, respectively. These results provide a solid foundation for the industrial application of the modified carrier as an effective tool for nitrogen removal in large-scale wastewater treatment processes.

A Biomimetic Se-nHA/PC Composite Microsphere with Synergistic Immunomodulatory and Osteogenic Ability to Activate Bone Regeneration in Periodontitis

Accumulation of reactive oxygen species (ROS) in periodontitis exacerbates the destruction of alveolar bone. Therefore, scavenging ROS to reshape the periodontal microenvironment, alleviate the inflammatory response and promote endogenous stem cell osteogenic differentiation may be an effective strategy for treating bone resorption in periodontitis. In this study, sericin-hydroxyapatite nanoparticles (Se-nHA NPs) are synthesized using a biomimetic mineralization method. Se-nHA NPs and proanthocyanidins (PC) are then encapsulated in sericin/sodium alginate (Se/SA) using an electrostatic injection technique to prepare Se-nHA/PC microspheres. Microspheres are effective in scavenging ROS, inhibiting the polarization of macrophages toward the M1 type, and inducing the polarization of macrophages toward the M2 type. In normal or macrophage-conditioned media, the Se-nHA/PC microspheres effectively promoted the osteogenic differentiation of human periodontal ligament stem cells (hPDLSCs). Furthermore, the Se-nHA/PC microspheres demonstrated anti-inflammatory effects in a periodontitis rat model by scavenging ROS and suppressing pro-inflammatory cytokines. The Se-nHA/PC microspheres are also distinguished by their capacity to decrease alveolar bone loss, reduce osteoclast activity, and boost osteogenic factor expression. Therefore, the biomimetic Se-nHA/PC composite microspheres have efficient ROS-scavenging, anti-inflammatory, and osteogenic abilities and can be used as a multifunctional filling material for inflammatory periodontal tissue regeneration.

Highly biocidal poly(vinyl alcohol)-hydantoin/starch hybrid gels: A "Trojan Horse" for Bacillus subtilis

HYPOTHESIS

Poly (vinyl alcohol) (PVA) cryogels can be functionalized with n-Halamines to confer biocidal features useful for their application as wound-dressing tools. Their efficacy can be boosted by stably embedding a polymeric bacterial food source (e.g., starch) in the gel matrix. The bioavailability of the food source lures bacteria inside the gel network via chemotactic mechanisms, promoting their contact with the biocidal functionalities and their consequent inactivation.

EXPERIMENTS

The synthesis of a novel hydantoin-functionalized PVA (H-PVA-hyd) is proposed. The newly synthesized H-PVA-hyd polymer was introduced in the formulation of H-PVA-based cryogels. To promote the cryogelation of the systems we exploited phase-separation mechanisms employing either a PVA carrying residual acetate groups (L-PVA) or starch as phase-segregating components. The permanence of the biocidal functionality after swelling was investigated via proton nuclear magnetic resonance (1H NMR) and Fourier transform infrared (FT-IR) microscopy. The activated H-PVA-hyd cryogels have been tested against bacteria with amylolytic activity (Bacillus subtilis) and the outcomes were analyzed by direct observation via confocal laser scanning microscopy (CLSM).

FINDINGS

The cryogels containing starch resulted in being the most effective (up to 90% bacterial killing), despite carrying a lower amount of hydantoin groups than their starch-free counterparts, suggesting that their improved efficacy relies on a "Trojan Horse" type of mechanism.

Intensified denitrification in a fluidized-bed reactor with suspended sulfur autotrophic microbial fillers

Sulfur-based autotrophic denitrification (SAD) is a promising low-carbon approach to tackle nitrate pollution. However, practical SAD reactor implementation faces challenges of slow denitrification rates and prolonged start-up periods. In this work, a fluidized-bed denitrification reactor with suspended composite fillers immobilized with elemental sulfur and SAD bacteria was constructed. The reactor reaches a steady state within the first day of operation. A denitrification rate of 0.61 g N L-1 d-1 was realized, which is 2.4-fold higher than that in the packed-bed reactor. Mixotrophic denitrification prevailed during the start-up period, while the SAD process became the predominant pathway (>70%) after several days of operation. The prevailing bacteria in the fillers, notably Thiobacillus, are enriched during denitrification operations. Overall, this study highlights the impressive denitrification capabilities of the fluidized SAD reactor with microbial fillers, providing valuable insights for enhancing denitrification techniques.

Resource recovery and valorization of food wastewater for sustainable development: An overview of current approaches

The food processing industry is one of the world's largest consumers of potable water. Agri-food wastewater systems consume about 70% of the world's fresh water and cause at least 80% of deforestation. Food wastewater is characterized by complex composition, a wide range of pollutants, and fluctuating water quality, which can cause huge environmental pollution problems if discharged directly. In recent years, food wastewater has attracted considerable attention as it is considered to have great prospects for resource recovery and reuse due to its rich residues of nutrients and low levels of harmful substances. This review explored and compared the sources and characteristics of different types of food wastewater and methods of wastewater treatment. Particular attention was paid to the different methods of resource recovery and reuse of food wastewater. The diversity of raw materials in the food industry leads to different compositional characteristics of wastewater, which determine the choice and efficiency of wastewater treatment methods. Physicochemical methods, and biological methods alone or in combination have been used for the efficient treatment of food wastewater. Current approaches for recycling and reuse of food wastewater include culture substrates, agricultural irrigation, and bio-organic fertilizers, recovery of high-value products such as proteins, lipids, biopolymers, and bioenergy to alleviate the energy crisis. Food wastewater is a promising substrate for resource recovery and reuse, and its valorization meets the current international policy requirements regarding food waste and environment protection, follows the development trend of the food industry, and is also conducive to energy conservation, emission reduction, and economic development. However, more innovative biotechnologies are necessary to advance the effectiveness of food wastewater treatment and the extent of resource recovery and valorization.

Modified alginate materials for wastewater treatment: Application prospects

Sodium alginate is a natural macromolecule widely used because of its abundance, low cost of acquisition, and rich hydroxyl and carboxyl groups in the matrix. The physical modification of sodium alginate can be made by blending it with polymer materials. The so-yielded alginate complex is commonly unstable in an aqueous environment due to alginate backbones' high hydrophilicity. The chemical modification can remove its hydrophilic groups and introduce special functional groups or polymers onto the alginate backbones to provide excess reaction sites for specific reactions and effective complexation sites for accommodating antibiotics, dyes, heavy metal ions, and radioactive elements. Sodium alginate has been used in water treatment engineering under revised modification protocols. This article also reviews the latest modification protocols for sodium alginate and outlines the novel application of the modified materials. The limitations of modified sodium alginate materials are described, and research prospects are put forward.

Plant-based Biomass/Polyvinyl Alcohol Gels for Flexible Sensors

Flexible sensors show great application potential in wearable electronics, human-computer interaction, medical health, bionic electronic skin and other fields. Compared with rigid sensors, hydrogel-based devices are more flexible and biocompatible and can easily fit the skin or be implanted into the body, making them more advantageous in the field of flexible electronics. In all designs, polyvinyl alcohol (PVA) series hydrogels exhibit high mechanical strength, excellent sensitivity and fatigue resistance, which make them promising candidates for flexible electronic sensing devices. This paper has reviewed the latest progress of PVA/plant-based biomass hydrogels in the construction of flexible sensor applications. We first briefly introduced representative plant biomass materials, including sodium alginate, phytic acid, starch, cellulose and lignin, and summarized their unique physical and chemical properties. After that, the design principles and performance indicators of hydrogel sensors are highlighted, and representative examples of PVA/plant-based biomass hydrogel applications in wearable electronics are illustrated. Finally, the future research is briefly prospected. We hope it can promote the research of novel green flexible sensors based on PVA/biomass hydrogel.

Specific nanoantibiotics for selective removal of antibiotic-resistant bacteria: New insights in bacterial imprinting based on interfacial biomimetic mineralization

Antibiotic resistance has been a worsening global concern and selective elimination of antibiotic-resistant bacteria (ARB) while retaining the co-existed beneficial bacteria has been essential in environmental protection, which having attracted considerable interest. In this work, by integrating the whole cell imprinting and epitope imprinting strategy, magnetic bacterial imprinted polymers (BIPs) towards ARB were synthesized with interfacial biomimetic mineralization followed by a screening process. The binding data showed that the BIPs owned highly specific affinity towards the target bacteria. Taking advantage of this specific binding ability of BIPs, a two-step selective antimicrobial approach was developed. Remarkably, the BIP nanoantibiotics (nAbts) could efficiently destroy ARB without harming the beneficial bacteria. In comparison with the non-bacterial imprinted polymers, the biocompatible BIP nAbts showed a 12.5-fold increase in the survival percentage for the beneficial bacteria in wastewater. To the best of our knowledge, this is the first time that bacterial imprinting via interfacial biomimetic mineralization was developed, and also the first report of killing ARB without harming the beneficial bacteria in wastewater. We believe that this strategy provides a new insight into the design of novel affinity materials for the selective elimination of ARB in biological treatment for environmental protection.