Co-culturing fungus Penicillium citrinum and strain Citrobacter freundii improved nitrate removal and carbon utilization by promoting glyceride metabolism

Microbial co-culture mediated by intercellular nanotubes during DMAC degradation: Microbial interaction, communication mode, and degradation mechanism

Microbial co-culture has been proven as an effective technique for environmental remediation. In this study, co-culture mechanism of Rhodococcus ruber HJM-8 and Paracoccus communis YBH-X during N,N-dimethylacetamide (DMAC) degradation was studied. The comparison of degradation performance in monoculture and co-culture was presented; due to the efficient cooperation between the two strains via parallel and cascaded degradation, the removal efficiency of total nitrogen (TN) in co-culture could reach 90.1%, which was 1.35 and 1.21 times higher than that of HJM-8 and YBH-X, respectively. Then the communication mode of co-culture during DMAC degradation was determined as contact-independent and contact-dependent interactions between microorganisms. Meanwhile, intercellular nanotube between HJM-8 and YBH-X was found as a unique contact-dependent interaction. The cell staining experiments and RNA sequencing analyses revealed that the nanotube could be used as a bridge to exchange cytoplasmic molecules, and thus improved material transfer and enhanced cell connection in co-culture. The results of KEGG pathway showed that differentially expressed genes in co-culture have an association with cell metabolism, nanotube generation, and genetic material transfer. Furthermore, a mechanism diagram of DMAC biodegradation was proposed for co-culture, indicating that bidirectional cooperation was established between HJM-8 and YBH-X which was mediated by the conversions of acetate and nitrogen. Finally, the co-culture system was validated for treatment of an actual wastewater; results indicated that removal efficiencies of 100% and 68.2% were achieved for DMAC and TN, respectively, suggesting that co-culture had the potential for application.

Aerobic Denitrification Promoting by Actinomycetes Coculture: Investigating Performance, Carbon Source Metabolic Characteristic, and Raw Water Restoration

The coculture theory that promotes denitrification relies on effectively utilizing the resources of low-efficiency denitrification microbes. Here, the strains Streptomyces sp. PYX97 and Streptomyces sp. TSJ96 were isolated and showed lower denitrification capacity when cultured individually. However, the coculture of strains PYX97 and TSJ96 enhanced nitrogen removal (removed 96.40% of total nitrogen) and organic carbon reduction (removed 92.13% of dissolved organic carbon) under aerobic conditions. Nitrogen balance analysis indicated that coculturing enhanced the efficiency of nitrate converted into gaseous nitrogen reaching 70.42%. Meanwhile, the coculturing promoted the cell metabolism capacity and carbon source metabolic activity. The coculture strains PYX97 and TSJ96 thrived in conditions of C/N = 10, alkalescence, and 150 rpm shaking speed. The coculturing reduced total nitrogen and CODMn in the raw water treatment by 83.32 and 84.21%, respectively. During this treatment, the cell metabolic activity and cell density increased in the coculture strains PYX97 and TSJ96 reactor. Moreover, the coculture strains could utilize aromatic protein and soluble microbial products during aerobic denitrification processes in raw water treatment. This study suggests that coculturing inefficient actinomycete strains could be a promising approach for treating polluted water bodies.

Mechanisms of N, N-dimethylacetamide-facilitated n-hexane removal in a rotating drum biofilter packed with bamboo charcoal-polyurethane composite

n-Hexane and N, N-dimethylacetamide (DMAC) are two major volatile organic compounds (VOCs) discharged from the pharmaceutical industry. To enhance DMAC-facilitated n-hexane removal, we investigated the simultaneous removal of multiple pollutants in a rotating drum biofilter packed with bamboo charcoal-polyurethane composite. After adding 800 mg·L^-1 DMAC, the n-hexane removal efficiency increased from 59.4 % to 83.1 % under the optimized conditions. The maximum elimination capacity of 10.0 g·m^-3·h^-1n-hexane and 157 g·m^-3·h^-1 DMAC were obtained. The biomass of bamboo charcoal-polyurethane and the ratio of protein-to-polysaccharide in extracellular polymeric substances were significantly increased compared with the non-DMAC stage, which is attributed to increased carbon utilization. In addition, Na⁺ K⁺-ATPase was positively correlated with increasing electron transport system activity, which was 1.98 and 1.36 times greater. Hydrophilic DMAC improved the bioavailability of hydrophobic n-hexane and benefited bacterial metabolism. Co-degradation of n-hexane and DMAC system can be used for other volatile organic pollutants.

Filamentous fungi for sustainable remediation of pharmaceutical compounds, heavy metal and oil hydrocarbons

This review presents a comprehensive summary of the latest research in the field of bioremediation with filamentous fungi. The main focus is on the issue of recent progress in remediation of pharmaceutical compounds, heavy metal treatment and oil hydrocarbons mycoremediation that are usually insufficiently represented in other reviews. It encompasses a variety of cellular mechanisms involved in bioremediation used by filamentous fungi, including bio-adsorption, bio-surfactant production, bio-mineralization, bio-precipitation, as well as extracellular and intracellular enzymatic processes. Processes for wastewater treatment accomplished through physical, biological, and chemical processes are briefly described. The species diversity of filamentous fungi used in pollutant removal, including widely studied species of Aspergillus, Penicillium, Fusarium, Verticillium, Phanerochaete and other species of Basidiomycota and Zygomycota are summarized. The removal efficiency of filamentous fungi and time of elimination of a wide variety of pollutant compounds and their easy handling make them excellent tools for the bioremediation of emerging contaminants. Various types of beneficial byproducts made by filamentous fungi, such as raw material for feed and food production, chitosan, ethanol, lignocellulolytic enzymes, organic acids, as well as nanoparticles, are discussed. Finally, challenges faced, future prospects, and how innovative technologies can be used to further exploit and enhance the abilities of fungi in wastewater remediation, are mentioned.