Acidic and alkaline deep eutectic solvents pre-treatment to produce high aspect ratio microfibrillated cellulose

Controllable acetylation of cellulose nanocrystal by uniform design and response surface methodology

Acetylation of Cellulose nanocrystal (CNC) can reduce its surface polarity and therefore extends its application in biomedical and chemical fields. A method combining uniform design (UD) and response surface methodology (RSM) was developed to produce the acetylated CNC with arbitrary degree of substitution (DS) and crystallinity index (CrI). The effects of three factors (i.e., temperature, reaction time and the volume of acetic anhydride) on DS and CrI were investigated in their respective ranges (i.e., 60-90 oC, 1.0-5.0 h and 1.0-5.0 mL). Both mathematical models for DS and CrI were developed by multiple stepwise regression (MSR) based on UD data and their significances were evaluated by analysis of variance. The controllable acetylation of CNC was realized by using either UD alone or the combination of UD and RSM. Eight verification experiments show that the relative errors between the predicted and the measured results are less than 16.77 % and 6.08 % for DS and CrI, respectively, confirming the reliability and validity of the method. This developed methodology is ingenious and expected to be expanded to any other fields that controllable preparations are required.

Deep eutectic solvents pretreatment enhances methane production from anaerobic digestion of waste activated sludge: Effectiveness evaluation and mechanism elucidation

Anaerobic digestion (AD) is a prevalent waste activated sludge (WAS) treatment, and optimizing methane production is a core focus of AD. Two DESs were developed in this study and significantly increased methane production, including choline chloride-urea (ChCl-Urea) 390% and chloride-ethylene glycol (ChCl-EG) 540%. Results showed that ChCl-Urea mainly disrupted extracellular polymeric substances (EPS) structures, aiding in initial sludge solubilization during pretreatment. ChCl-EG, instead, induced sludge self-driven organic solubilization and enhanced hydrolysis and acidification processes during AD process. Based on the extent to which the two DESs promoted AD for methane production, the AD process can be divided into stage Ⅰ and stage Ⅱ. In stage Ⅰ, ChCl-EG promoted methanogenesis more significantly, microbiological analysis showed both DESs enriched aceticlastic methanogens-Methanosarcina. Notably, ChCl-Urea particularly influenced polysaccharide-related metabolism, whereas ChCl-EG targeted protein-related metabolism. In stage Ⅱ, ChCl-Urea was more dominant than ChCl-EG, ChCl-Urea bolstered metabolism and ChCl-EG promoted genetic information processing in this stage. In essence, this study investigated the microbial mechanism of DES-enhanced sludge methanogenesis and provided a reference for future research.

Fed-batch treatment attenuates diffusional limitation while preparing high solid microfibrillated cellulose from Gelidium amansii

This study investigates the effects of fed-batch treatment on the fibrillation degree and properties of Gelidium amansii-derived microfibrillated cellulose (MFC). Fed-batch milling was conducted with the initial solid loading of 1 % w/v followed by three stages of feeding to obtain a final solid concentration of 5 % w/v. This process provides a high-solid MFC of around 10 %, while batch milling only provides the maximum solid loading of 4 %. It also reduces approximately 83 % power consumption of batch milling at the same solid loading (4 %). The obtained MFC 5 % has lower fibrils length (14.9 µm) and width (16.46 nm), but higher consistency index (>250 Pa.s) than MFC 1 % (22 µm, 21 nm, 5.88 Pa.s). The crystallinity and maximum decomposition temperatures of both MFCs are comparable, varying at 49-53 % and 318 °C-320 °C. In summary, fed-batch treatment is promising for the techno-economic development of MFC production by lowering energy and maintaining product quality.

Biocomposites Based on Wheat Flour with Urea-Based Eutectic Plasticizer and Spent Coffee Grounds: Preparation, Physicochemical Characterization, and Study of Their Influence on Plant Growth

In this study, we conducted the first plasticization of wheat flour (WF) with the addition of choline chloride:urea (1:5 molar ratio) eutectic mixture as a plasticizer and spent coffee grounds (cf) as a filler. Thermoplastic wheat flour (TPWF) films were obtained via twin-screw extrusion and then thermocompression. Their physicochemical characterization included mechanical tests, dynamic mechanical thermal analysis (DMTA), and sorption tests. XRD analysis revealed that the eutectic plasticizer led to a high degree of WF amorphization, which affected the physicochemical properties of TPWF. The results indicated that it was easy for the TPWF biocomposites to undergo thermocompression even with a high amount of the filler (20 pph per flour). The addition of the cf into TPWF led to an increase in tensile strength and a decrease in the swelling degree of the biocomposites. Biodegradation tests in soil revealed that the materials wholly degraded within 11 weeks. Moreover, a study of cultivated plants indicated that the biocomposites did not exhibit a toxic influence on the model rowing plant.

Using deep eutectic solvent dissolved low-value cotton linter based efficient magnetic adsorbents for heavy metal removal

In this study, a novel magnetic bio-adsorbent was synthesized by modifying cotton linter (CL) cellulose with deep eutectic solvents (DESs) and Fe₃O₄ magnetic nanoparticles. The adsorption capacity of CL, Fe₃O₄/CL, Fe₃O₄/CL-oxidation, and Fe₃O₄/CL-DES for Cu²⁺ was 11.0, 66.1, 85.7, and 93.1 mg g^-1, respectively, under the optimal adsorption conditions of an initial pH value of 6.0, stirring rate of 300 rpm, and a temperature of 30 °C. The presence of Fe₃O₄ nanoparticles increased the proportion of hydroxyl groups and thus improved the ion-exchange ability of Cu²⁺. The dissolution of DES significantly decreased fiber crystallinity and increased the number of hydroxyl group (amorphous regions increased), thus improving the chelation reaction of Cu²⁺, which was favorable for surface adsorption. In addition, we used the Langmuir and Freundlich isothermal models to simulate the adsorption behavior of Fe₃O₄/CL-DES, and the results indicated that Cu²⁺ follows a Freundlich isotherm model of multilayer adsorption. The fitting of the adsorption kinetics model indicated that the adsorption process involves multiple adsorption mechanisms and can be described by a quasi-second-order model. These results provide a potential method for the preparation of high-efficiency adsorbents from low-value cotton linter, which has broad application prospects in wastewater treatment.