A disposable on-chip phosphate sensor with planar cobalt microelectrodes on polymer substrate

Robust (hydrogen) phosphate sensing based on reversible redox of cobalt(II) hydroxide

Response mechanism of the electrode is elucidated in terms of (hydrogen) phosphate accelerating oxidation of CoII to CoIII for the first time. Cyclic voltammetric techniques in conjunction with XRD, XPS and Raman characterizations have demonstrated unambiguously the response of cobalt (II) hydroxide electrode involves a phosphate and hydrogen ion dependent charge transfer process. Phosphate ions induce Co(OH)2 transformed into CoOOH within interlayer adsorption and restored the initial state after reduction. Meanwhile, the in common structural between Co(OH)2 and CoOOH prevents extensive structural convertibility upon cycling, result in the advantage of reversibility in phase transformation. Demonstrated sustainable technique offered the determination of phosphate with robust reproducibility (1000 cycles), long storage stability (6 months) and selectivity (potential interference: Cl-, NO3-, SO42- and HCO3-), achieving a detection limit of 5 × 10-8 M over a wide linear range up to 1.28 mM. Presented work provided insights into the unique selectivity towards phosphate in cobalt based sensors, which may inspire the rational design of Co(OH)2-based electrodes with superior electrochemical performance or extended applications.

Enzyme Immobilization by Inkjet Printing on Reagentless Biosensors for Electrochemical Phosphate Detection

Enzyme-based biosensors commonly utilize the drop-casting method for their surface modification. However, the drawbacks of this technique, such as low reproducibility, coffee ring effects, and challenges in mass production, hinder its application. To overcome these limitations, we propose a novel surface functionalization strategy of enzyme crosslinking via inkjet printing for reagentless enzyme-based biosensors. This method includes printing three functional layers onto a screen-printed electrode: the enzyme layer, crosslinking layer, and protective layer. Nanomaterials and substrates are preloaded together during our inkjet printing. Inkjet-printed electrodes feature a uniform enzyme deposition, ensuring high reproducibility and superior electrochemical performance compared to traditional drop-casted ones. The resultant biosensors display high sensitivity, as well as a broad linear response in the physiological range of the serum phosphate. This enzyme crosslinking method has the potential to extend into various enzyme-based biosensors through altering functional layer components.

Progress and current trends in the electrochemical determination of phosphate ions for environmental and biological monitoring applications

The determination of phosphate ions in biological testing is critical for environmental safety. A reliable and accurate method is required to measure the true phosphate ion concentrations; in this regard, the electrochemical method is preferable because of its simple operation, fast response, and high sensitivity. By compiling existing electroanalytical techniques, researchers can compare the advantages and disadvantages of each method. This review examines the progress and recent advances in electrochemical sensing strategies adapted for the determination of phosphate ions in the environmental and during biological monitoring. We first discuss the history of phosphorus and the development of methods to detect phosphates. The recognition elements of phosphate ion sensors for environmental applications include metal-based, nanomaterial-based, carbon-based, and enzymatic electrodes. Phosphate determination in biological samples, such as blood serum, drugs, and other biological fluids, such as urine and saliva, as well as phosphate esters, is also discussed. The final part of our review addresses the current challenges that phosphate sensing technology faces and illustrates future opportunities for more reliable phosphate detection.

Recent Advances in Chemical Sensors for Soil Analysis: A Review

The continuously rising interest in chemical sensors’ applications in environmental monitoring, for soil analysis in particular, is owed to the sufficient sensitivity and selectivity of these analytical devices, their low costs, their simple measurement setups, and the possibility to perform online and in-field analyses with them. In this review the recent advances in chemical sensors for soil analysis are summarized. The working principles of chemical sensors involved in soil analysis; their benefits and drawbacks; and select applications of both the single selective sensors and multisensor systems for assessments of main plant nutrition components, pollutants, and other important soil parameters (pH, moisture content, salinity, exhaled gases, etc.) of the past two decades with a focus on the last 5 years (from 2017 to 2021) are overviewed.

Printed Electrode for Measuring Phosphate in Environmental Water

Phosphate is a major nonpoint source pollutant in both the Louisiana local streams as well as in the Gulf of Mexico coastal waters. Phosphates from agricultural run-off have contributed to the eutrophication of global surface waters. Phosphate environmental dissemination and eutrophication problems are not yet well understood. Thus, this study aimed to monitor phosphate in the local watershed to help identify potential hot spots in the local community (Mississippi River, Louisiana) that may contribute to nutrient loading downstream (in the Gulf of Mexico). An electrochemical method using a physical vapor deposited cobalt microelectrode was utilized for phosphate detection using cyclic voltammetry and amperometry. The testing results were utilized to evaluate the phosphate distribution in river water and characterize the performance of the microsensor. Various characterizations, including the limit of detection, sensitivity, and reliability, were conducted by measuring the effect of interferences, including dissolved oxygen, pH, and common ions. The electrochemical sensor performance was validated by comparing the results with the standard colorimetry phosphate detection method. X-ray photoelectron spectroscopy (XPS) measurements were performed to understand the phosphate sensing mechanism on the cobalt electrode. This proof-of-concept sensor chip could be utilized for on-field monitoring using a portable, hand-held potentiostat.

Soil Sensors and Plant Wearables for Smart and Precision Agriculture

Soil sensors and plant wearables play a critical role in smart and precision agriculture via monitoring real-time physical and chemical signals in the soil, such as temperature, moisture, pH, and pollutants and providing key information to optimize crop growth circumstances, fight against biotic and abiotic stresses, and enhance crop yields. Herein, the recent advances of the important soil sensors in agricultural applications, including temperature sensors, moisture sensors, organic matter compounds sensors, pH sensors, insect/pest sensors, and soil pollutant sensors are reviewed. Major sensing technologies, designs, performance, and pros and cons of each sensor category are highlighted. Emerging technologies such as plant wearables and wireless sensor networks are also discussed in terms of their applications in precision agriculture. The research directions and challenges of soil sensors and intelligent agriculture are finally presented.

A Co-Nanoparticles Modified Electrode for On-Site and Rapid Phosphate Detection in Hydroponic Solutions

Conventional strategies for determining phosphate concentration is limited in efficiency due to the cost, time, and labor that is required in laboratory analysis. Therefore, an on-site and rapid detection sensor for phosphate is urgently needed to characterize phosphate variability in a hydroponic system. Cobalt (Co) is a highly sensitive metal that has shown a selectivity towards phosphate to a certain extent. A disposable phosphate sensor based on the screen-printed electrode (SPE) was developed to exploit the advantages of Co-nanoparticles. A support vector machine regression model was established to predict the concentration of phosphate in the hydroponic solutions. The results showed that Co-nanoparticles improve the detection limit of the sensor in the initial state. Meanwhile, the corrosion of Co-nanoparticles leads to a serious time-drift and instability of the electrodes. On the other hand, the coefficient of variation of the disposable phosphate detection chip is 0.4992%, the sensitivity is 33 mV/decade, and the linear range is 10-1-10-4.56 mol/L. The R2 and mean square error of the buffer-free sensor in the hydroponic solution are 0.9792 and 0.4936, respectively. In summary, the SPE modified by the Co-nanoparticles is a promising low-cost sensor for on-site and rapid measurement of the phosphate concentration in hydroponic solutions.

Nozzle-Jet-Printed Silver/Graphene Composite-Based Field-Effect Transistor Sensor for Phosphate Ion Detection

High concentration of dissolved phosphate ions is the main responsible factor for eutrophication of natural water bodies. Therefore, detection of phosphate ions is essential for evaluating water eutrophication. There is a need at large-scale production of real-time monitoring technology to detect phosphorus accurately. In this study, facile enzymeless phosphate ion detection is reported using a nozzle-jet-printed silver/reduced graphene oxide (Ag/rGO) composite-based field-effect transistor sensor on flexible and disposable polymer substrates. The sensor exhibits promising results in low concentration as well as real-time phosphate ion detection. The sensor shows excellent performance with a wide linear range of 0.005-6.00 mM, high sensitivity of 62.2 μA/cm²/mM, and low detection limit of 0.2 μM. This facile combined technology readily facilitates the phosphate ion detection with high performance, long-term stability, excellent reproducibility, and good selectivity in the presence of other interfering anions. The sensor fabrication method and phosphate detection technique yield low-cost, user-friendly sensing devices with less analyte consumption, which are easy to fabricate on polymer substrates on a large scale. Besides, the sensor has the capability to sense phosphate ions in real water samples, which makes it applicable in environmental monitoring.

Development of a nickel oxide/oxyhydroxide-modified printed carbon electrode as an all solid-state sensor for potentiometric phosphate detection

This work describes the preparation, characterization and use of a nickel oxide/oxyhydroxide-printed carbon electrode as an efficient potentiometric phosphate sensor.

Electrochemical Biosensors: A Solution to Pollution Detection with Reference to Environmental Contaminants

The increasing environmental pollution with particular reference to emerging contaminants, toxic heavy elements, and other hazardous agents is a serious concern worldwide. Considering this global issue, there is an urgent need to design and develop strategic measuring techniques with higher efficacy and precision to detect a broader spectrum of numerous contaminants. The development of precise instruments can further help in real-time and in-process monitoring of the generation and release of environmental pollutants from different industrial sectors. Moreover, real-time monitoring can also reduce the excessive consumption of several harsh chemicals and reagents with an added advantage of on-site determination of contaminant composition prior to discharge into the environment. With key scientific advances, electrochemical biosensors have gained considerable attention to solve this problem. Electrochemical biosensors can be an excellent fit as an analytical tool for monitoring programs to implement legislation. Herein, we reviewed the current trends in the use of electrochemical biosensors as novel tools to detect various contaminant types including toxic heavy elements. A particular emphasis was given to screen-printed electrodes, nanowire sensors, and paper-based biosensors and their role in the pollution detection processes. Towards the end, the work is wrapped up with concluding remarks and future perspectives. In summary, electrochemical biosensors and related areas such as bioelectronics, and (bio)-nanotechnology seem to be growing areas that will have a marked influence on the development of new bio-sensing strategies in future studies.

ZnO nanorods array based field-effect transistor biosensor for phosphate detection

A promising field-effect transistor (FET) biosensor has been fabricated based on pyruvate oxidase (PyO) functionalized ZnO nanorods (ZnO NRs) array grown on seeded SiO₂/Si substrate. The direct and vertically grown ZnO NRs on the seeded SiO₂/Si substrate offers high surface area for enhanced PyO immobilization, which further helps to detect phosphate with higher specificity. Under optimum conditions, the fabricated FET biosensor provided a convenient method for phosphate detection with high sensitivity (80.57μAmM^-1cm^-2) in a wide-linear range (0.1µM-7.0mM). Additionally, it also showed very low effect of electroactive species, stability and good reproducibility. Encouraging results suggest that this approach presents a promising method to be used for field measurements to detect phosphate.

Flexible Molybdenum Electrodes towards Designing Affinity Based Protein Biosensors

Molybdenum electrode based flexible biosensor on porous polyamide substrates has been fabricated and tested for its functionality as a protein affinity based biosensor. The biosensor performance was evaluated using a key cardiac biomarker; cardiac Troponin-I (cTnI). Molybdenum is a transition metal and demonstrates electrochemical behavior upon interaction with an electrolyte. We have leveraged this property of molybdenum for designing an affinity based biosensor using electrochemical impedance spectroscopy. We have evaluated the feasibility of detection of cTnI in phosphate-buffered saline (PBS) and human serum (HS) by measuring impedance changes over a frequency window from 100 mHz to 1 MHz. Increasing changes to the measured impedance was correlated to the increased dose of cTnI molecules binding to the cTnI antibody functionalized molybdenum surface. We achieved cTnI detection limit of 10 pg/mL in PBS and 1 ng/mL in HS medium. The use of flexible substrates for designing the biosensor demonstrates promise for integration with a large-scale batch manufacturing process.

Nanomaterial-enabled Rapid Detection of Water Contaminants

Water contaminants, e.g., inorganic chemicals and microorganisms, are critical metrics for water quality monitoring and have significant impacts on human health and plants/organisms living in water. The scope and focus of this review is nanomaterial-based optical, electronic, and electrochemical sensors for rapid detection of water contaminants, e.g., heavy metals, anions, and bacteria. These contaminants are commonly found in different water systems. The importance of water quality monitoring and control demands significant advancement in the detection of contaminants in water because current sensing technologies for water contaminants have limitations. The advantages of nanomaterial-based sensing technologies are highlighted and recent progress on nanomaterial-based sensors for rapid water contaminant detection is discussed. An outlook for future research into this rapidly growing field is also provided.

Progress and recent advances in fabrication and utilization of hypoxanthine biosensors for meat and fish quality assessment: a review

This review provides an update on the research conducted on the fabrication and utilization of hypoxanthine (Hx) biosensors published over the past four decades. In particular, the review focuses on progress made in the development and use of Hx biosensors for the assessment of fish and meat quality which has dominated research in this area. The various fish and meat freshness indexes that have been proposed over this period are highlighted. Furthermore, recent developments and future advances in the use of screen-printed electrodes and nanomaterials for achieving improved performances for the reliable determination of Hx in fish and meat are discussed.

Sensing and analysis of soluble phosphates in environmental samples: a review

Excess phosphate levels in water can lead to increased algal growth, eutrophication and reduced water quality. Phosphate levels in water are regulated by the EU through the Urban Waste Water Treatment Directive (annual mean total phosphorus concentrations of 1-2 mg/l) and the Water Framework Directive that will enforce "good ecological and chemical status" by 2015. Legislation is therefore driving the need for increased monitoring of soluble phosphate in water, escalating the desire for a direct, label free approach that could provide remote, continuous monitoring in real-time. The standard method for measuring soluble phosphate in water is a colourimetric technique developed in the 1960s. This colourimetric approach is difficult to adapt for on-line measurements, uses specific reagents which require safe disposal and thus incurs significant costs to the water industry when carried out on a large scale. This review considers optical and electrochemical sensors plus recent advances with synthetic receptors and molecularly imprinted polymers. Progress in the development of phosphate sensors, designed for use in a variety of disciplines, is highlighted with a view to adapting successful approaches for use in the water sector. Additional considerations include the need for long term stability, low maintenance, specificity for phosphate and the capability of measuring total phosphorus concentrations down to at least 1 mg/l, as required by legislation. A sensor that could directly measure soluble, inorganic phosphate concentrations would draw significant interest from the environment sector and other disciplines, including the agricultural, detergent and bio-medical industries.

A self-pumping lab-on-a-chip for rapid detection of botulinum toxin

A robust poly(dimethylsiloxane) (PDMS) surface treatment was utilized for the development of a self-pumping lab-on-a-chip (LOC) to rapidly detect minute quantities of toxic substances. One such toxin, botulinum neurotoxin (BoNT), is an extremely lethal substance, which has the potential to cause hundreds of thousands of fatalities if as little as a few grams are released into the environment. To prevent such an outcome, a quick (<45 min) and sensitive detection format is needed. We have developed a self-pumping LOC that can sense down to 1 pg of BoNT type A (in a 1 microL sample) within 15 min in an autonomous manner. The key technologies enabling for such a device are a sensitive electrochemical sensor, an optimized fluidic network and a robust hydrophilic PDMS coating, thereby facilitating autonomous delivery of liquid samples for rapid detection. The stability, simplicity and portability of this device make possible for a storable and distributable system for monitoring bioterrorist attacks.