Enzyme immunosensing of pepsinogens 1 and 2 by scanning electrochemical microscopy

Painless and sensitive pepsinogen I detection: an electrochemical immunosensor based on rhombic dodecahedral Cu3Pt and MoS2 NFs

Gastric cancer (GC) is a common malignant tumour of the digestive tract with a high mortality rate worldwide. However, many patients delay treatment due to the avoidance of the costly and painful procedure of gastroscopy. Therefore, an early convenient screening method is essential to improve the survival rate of GC patients. To address this issue, we constructed an electrochemical immunosensor supported by rhombohedral Cu₃Pt and MoS₂ nanoflowers (MoS₂ NFs) for rapid, painless and quantitative detection of the GC biomarker in vitro. Here, pepsinogen I was employed as a model protein biomarker to analyse the performance of the immunosensor. The rhombohedral dodecahedral Cu₃Pt nanoparticles decorated with MoS₂-NFs were further functionalized; this allowed the constructed sensor to possess more nano- or micro-structures, thereby improving the detection sensitivity. In specific applications, the corresponding bioactive molecules can be flexibly captured. Under optimal conditions, the immunoassay showed a wide linear range from 500 pg mL^-1 to 400 ng mL^-1 and a low detection limit of 167 pg mL^-1 (S/N = 3). This covers the critical value of 70 ng mL^-1, and the results obtained from the analysis of human serum samples were on par with those from the enzyme immunoassay, suggesting significant potential for this new method in daily diagnosis.

Analysis of Gastric Diseases and Their Symptoms Based on Indexes of Pepsinogen I (PGI) and Pepsinogen II (PGII): Take 1106 Patients as Samples

In this study, preoperative analysis of 1106 gastropathy patients with abdominal pain, vomiting, dyspepsia, and other symptoms was conducted. Independent sample $t$ -test and correlation analysis and other ways were used for data cleansing and analysis. Findings were as follows: (1) Samples of different genders showed significance in PGI and PGII. The PGI and PGII values of women were significantly lower than those of men. (2) Age showed a significant positive correlation with PGI and PGII, which indicates that as the age increases, the PGI and PGII values become higher. (3) There was a significant negative correlation between age and abdominal pain. This signified that the younger the patient is, the more likely they will suffer abdominal pain. (4) PGI displayed a positive correlation with abdominal pain in the digestive tract (dyspepsia, gastrointestinal ulcers, gastrointestinal bleeding, etc.). It indicated that the higher the PGI value is, the more likely the patients will suffer abdominal pain and gastrointestinal diseases (dyspepsia, gastrointestinal ulcer, gastrointestinal hemorrhage, etc.). (5) PGII displayed a significant positive correlation with gastrointestinal diseases (dyspepsia, gastrointestinal ulcer, gastrointestinal hemorrhage, etc.) and a negative correlation with gastropathy (acute gastritis, chronic superficial gastritis, gastric ulcer, etc.). It indicated that the higher the value of PGII is, the more likely the patients will suffer symptoms of gastrointestinal diseases (dyspepsia, gastrointestinal ulcer, gastrointestinal hemorrhage, etc.), while less likely the patients will suffer gastropathy (acute gastritis, chronic superficial gastritis, gastric ulcer, etc.).

Scanning electrochemical microscopy in the development of enzymatic sensors and immunosensors

Scanning electrochemical microscopy (SECM) is very useful, non-invasive tool for the analysis of surfaces pre-modified with biomolecules or by whole cells. This review focuses on the application of SECM technique for the analysis of surfaces pre-modified with enzymes (horseradish peroxidase, alkaline phosphatase and glucose oxidase) or labelled with antibody-enzyme conjugates. The working principles and operating modes of SECM are outlined. The applicability of feedback, generation-collection and redox competition modes of SECM on surfaces modified by enzymes or labelled with antibody-enzyme conjugates is discussed. SECM is important in the development of miniaturized bioanalytical systems with enzymes, since it can provide information about the local enzyme activity. Technical challenges and advantages of SECM, experimental parameters, used enzymes and redox mediators, immunoassay formats and analytical parameters of enzymatic SECM sensors and immunosensors are reviewed.

Label-free detection of pepsinogen 1 and 2 by polyethylene coating Lamb microfluidic device

Early screening of gastric cancer is a critical importance for the improvement of patients' survival rate. Here, a polyethylene coating Lamb (PE-Lamb) microfluidic device with immune layer for gastric cancer label-free detection was constructed. Two serum pepsinogen 1 (PG1) and pepsinogen 2 (PG2) biomarkers were applied to screen and predict the appearance of gastric cancer. Compared with enzyme-linked immunosorbent assay (ELISA), this method achieved a higher sensitivity and less time (40 min vs 120 min). The limit of detections (LOD) were reached 60 pg/mL for PG1 and 30 pg/mL for PG2, which have two orders of magnitude lower than traditional ELISA. The linearity coefficient indexes (R²) for PG1 and PG2 were 0.992 and 0.953 respectively, which is similar to that of ELISA. In addition, PG1 and PG2 mixed antigens sample with human serum was detected by PE-Lamb approach, and the frequency response showed high reproducibility and specificity. The results indicate that PE-lamb diagnostic technique is a novel and promising method for high-throughput screening and early diagnosis of gastric cancer.

Recent Advances in Scanning Electrochemical Microscopy for Biological Applications

Scanning electrochemical microscopy (SECM) is a chemical microscopy technique with high spatial resolution for imaging sample topography and mapping specific chemical species in liquid environments. With the development of smaller, more sensitive ultramicroelectrodes (UMEs) and more precise computer-controlled measurements, SECM has been widely used to study biological systems over the past three decades. Recent methodological breakthroughs have popularized SECM as a tool for investigating molecular-level chemical reactions. The most common applications include monitoring and analyzing the biological processes associated with enzymatic activity and DNA, and the physiological activity of living cells and other microorganisms. The present article first introduces the basic principles of SECM, followed by an updated review of the applications of SECM in biological studies on enzymes, DNA, proteins, and living cells. Particularly, the potential of SECM for investigating bacterial and biofilm activities is discussed.

Immunochemical Micro Imaging Analyses for the Detection of Proteins in Artworks

The present review is aimed at reporting on the most advanced and recent applications of immunochemical imaging techniques for the localization of proteins within complex and multilayered paint stratigraphies. Indeed, a paint sample is usually constituted by the superimposition of different layers whose characterization is fundamental in the evaluation of the state of conservation and for addressing proper restoration interventions. Immunochemical methods, which are based on the high selectivity of antigen-antibody reactions, were proposed some years ago in the field of cultural heritage. In addition to enzyme-linked immunosorbent assays for protein identification, immunochemical imaging methods have also been explored in the last decades, thanks to the possibility to localize the target analytes, thus increasing the amount of information obtained and thereby reducing the number of samples and/or analyses needed for a comprehensive characterization of the sample. In this review, chemiluminescent, spectroscopic and electrochemical imaging detection methods are discussed to illustrate potentialities and limits of advanced immunochemical imaging systems for the analysis of paint cross-sections.

Scanning Electrochemical Microscopy (SECM): Fundamentals and Applications in Life Sciences

In recent years, scanning electrochemical microscopy (SECM) has made significant contributions to the life sciences. Innovative developments focusing on high-resolution imaging, developing novel operation modes, and combining SECM with complementary optical or scanning probe techniques renders SECM an attractive analytical approach. This chapter gives an introduction to the essential instrumentation and operation principles of SECM for studying biologically-relevant systems. Particular emphasis is given to applications aimed at imaging the activity of biochemical constituents such as enzymes, antibodies, and DNA, which play a pivotal role in biomedical diagnostics. Furthermore, the unique advantages of SECM and combined techniques for studying live cells is highlighted by discussion of selected examples.

A new label-free strategy for a highly efficient chemiluminescence immunoassay

A new label-free chemiluminescence (CL) immunoassay method which is based on the co-immobilization of a capture antibody and horseradish peroxidase (HRP) on the Au nanoparticle–chitosan composite interface is proposed for the cheap, fast and convenient detection of proteins.

Microspot-based ELISA in microfluidics: chemiluminescence and colorimetry detection using integrated thin-film hydrogenated amorphous silicon photodiodes

Microfluidic technology has the potential to decrease the time of analysis and the quantity of sample and reactants required in immunoassays, together with the potential of achieving high sensitivity, multiplexing, and portability. A lab-on-a-chip system was developed and optimized using optical and fluorescence microscopy. Primary antibodies are adsorbed onto the walls of a PDMS-based microchannel via microspotting. This probe antibody is then recognised using secondary FITC or HRP labelled antibodies responsible for providing fluorescence or chemiluminescent and colorimetric signals, respectively. The system incorporated a micron-sized thin-film hydrogenated amorphous silicon photodiode microfabricated on a glass substrate. The primary antibody spots in the PDMS-based microfluidic were precisely aligned with the photodiodes for the direct detection of the antibody-antigen molecular recognition reactions using chemiluminescence and colorimetry. The immunoassay takes ~30 min from assay to the integrated detection. The conditions for probe antibody microspotting and for the flow-through ELISA analysis in the microfluidic format with integrated detection were defined using antibody solutions with concentrations in the nM-μM range. Sequential colorimetric or chemiluminescence detection of specific antibody-antigen molecular recognition was quantitatively detected using the photodiode. Primary antibody surface densities down to 0.182 pmol cm(-2) were detected. Multiplex detection using different microspotted primary antibodies was demonstrated.

Rapid and separation-free sandwich immunosensing based on accumulation of microbeads by negative-dielectrophoresis

We report here a rapid and separation-free immunoassay using a dielectrophoresis (DEP) device consisting of an interdigitated microarray (IDA) electrode and a polydimethylsiloxane (PDMS) substrate. On applying an AC voltage to the IDA in a negative-DEP (n-DEP) frequency region, goat anti-mouse immunoglobulin (anti-mouse IgG)-immobilized microbeads moved to the surface of the PDMS substrate placed above the IDA. The microbeads accumulated at designated areas of the PDMS surface that had been precoated with anti-mouse IgG. When the fluorescence microbeads bearing anti-mouse IgG were suspended in an analyte (mouse IgG) solution, the microbeads trapped the analyte to form immunocomplexes on microbeads. The microbeads reacted with mouse IgG accumulated and were captured at the designated areas of the PDMS surface via an antibody-antigen-antibody (sandwich) reaction. The captured microbeads were detected selectively by fluorescence measurements at the focused designated areas, regardless of the presence of uncaptured microbeads suspended in solution. Thus, the separation and washing-out steps usually required for conventional immunoassay are eliminated in the presented procedure. Since the formation of the sandwich structures was accelerated significantly by n-DEP, a period as short as 30s was sufficient to detect the immunoreaction at the surface. The fluorescence intensity of the captured microbeads at the designated areas increased with analyte concentration in the range 0.01-10ng/mL. The present procedure therefore yields a rapid, sensitive, and separation-free immunoassay in a simple device.

Electrochemical immunosensor of platelet-derived growth factor with aptamer-primed polymerase amplification

A new method for the determination of platelet-derived growth factor BB (PDGF-BB) was developed using an electrochemical immunosensor with an aptamer-primed, long-strand circular detection probe. Rabbit anti-human PDGF-B polyclonal antibody was immobilized on the electrode to serve as the capture antibody. The detection probe was synthesized via polymerase extension along a single-stranded circular plasmid DNA template with a primer headed by the anti-PDGF-B aptamer. In the presence of the analyte, the aptamer-primed circular probe was captured on the electrode via the formation of an antibody/PDGF-BB/aptamer sandwiched complex. The electroactivity indicator methylene blue was adsorbed on the electrode surface via the analyte-sandwiched complex with long-strand circular DNA, thus yielding a strong electrochemical signal for the quantification of PDGF-BB. This strategy allowed electrochemical detection with enormous signal amplification arising from the long-strand localized circular probe. The oxidation peak current of methylene blue in square wave voltammetric measurements showed a linear dependence on the concentration of PDGF-BB in the range from 50 to 500 ng mL(-1), with a detection limit as low as 18 pg mL(-1).

Review: Recent applications of scanning electrochemical microscopy to the study of charge transfer kinetics

Scanning electrochemical microscopy (SECM) has been proven to be a valuable technique for the quantitative investigation and surface analysis of a wide range of processes that occur at interfaces. In particular, there is a great deal of interest in studying the kinetics of charge transfer characteristics at the solid/liquid and liquid/liquid interface. This overview outlines recent advances and applications of SECM to the investigation of charge transfer reactions at the solid/liquid interface and liquid/liquid interface.