Microfluidic biochip for chemiluminescent detection of allergen-specific antibodies

A microfluidic plasma separation device combined with a surface plasmon resonance biosensor for biomarker detection in whole blood

Biomarker detection in whole blood enables understanding of the cause, progression, relapse or outcome of treatment of a disease. Conventional biomarker detection techniques, such as enzyme-linked immunosorbent assay, polymerase chain reaction, and immunofluorescence, require long assay time, costly laboratory instruments, large reagent volume and sample pre-processing. Hence, there is an unmet need for reliable capture and detection of biomarkers in unprocessed blood which are adaptable to point-of-care (POC) testing. Here, we present a simple, low-cost, and rapid protein detection device from whole blood samples which has the potential to be employed in a POC setting. The platform consists of two components: a plasma separation device that extracts plasma from whole blood without the application of any external active forces and a SPR sensor chip that uses a label-free optical technique for the detection of biomarkers in the extracted plasma. We have demonstrated the detection of IgG and IgM biomolecules in unprocessed blood at concentrations lower than the physiological value within 15 min. The proposed technique has the potential for improving the diagnosis and screening of many diseases, including cancer, influenza, human immunodeficiency virus, and SARS-Cov2 at POC.

Potential Microfluidic Devices for COVID-19 Antibody Detection at Point-of-Care (POC): A Review

COVID-19 has been declared a global pandemic which has brought the world economy and the society to a standstill. The current emphasis of testing is on detection of genetic material of SARS-CoV-2. Such tests are useful for assessing the current state of a subject: Infected or not infected. In addition to such tests, antibody testing is necessary to stratify the population into three groups: never exposed, infected, and immune. Such a stratification is necessary for safely reopening the society and remobilizing the economy. The aim of this review article is to inform the audience of the current diagnostic and surveillance technologies that are being employed for the detection of SARS-CoV-2 antibodies along with their shortcomings, and to highlight microfluidic sensors and devices that show promise of being commercialized for detection and quantification of SARS-CoV-2 antibodies in low-resource and Point-of-Care (POC) settings.

Microfluidic immunoassay for detection of serological antibodies: A potential tool for rapid evaluation of immunity against SARS-CoV-2

In December 2019, coronavirus disease 2019 became a pandemic affecting more than 200 countries and territories. Millions of lives are still affected because of mandatory quarantines, which hamstring economies and induce panic. Immunology plays a major role in the modern field of medicine, especially against virulent infectious diseases. In this field, neutralizing antibodies are heavily studied because they reflect the level of infection and individuals' immune status, which are essential when considering resumption of work, flight travel, and border entry control. More importantly, it also allows evaluating the antiviral vaccine efficacy as vaccines are still known for being the ultimate intervention method to inhibit the rapid spread of virulent infectious diseases. In this Review, we first introduce the host immune response after the infection of SARS-CoV-2 and discuss the latest results using conventional immunoassays. Next, as an enabling platform for detection with sufficient sensitivity while saving analysis time and sample size, the progress of microfluidic-based immunoassays is discussed and compared based on surface modification, microfluidic kinetics, signal output, signal amplification, sample matrix, and the detection of anti-SARS-CoV-2 antibodies. Based on the overall comparison, this Review concludes by proposing the future integration of visual quantitative signals on microfluidic devices as a more suitable approach for general use and large-scale surveillance.

Microfluidic methods for precision diagnostics in food allergy

Food allergy has reached epidemic proportions and has become a significant source of healthcare burden. Oral food challenge, the gold standard for food allergy assessment, often is not performed because it places the patient at risk of developing anaphylaxis. However, conventional alternative food allergy tests lack a sufficient predictive value. Therefore, there is a critical need for better diagnostic tests that are both accurate and safe. Microfluidic methods have the potential of helping one to address such needs and to personalize the diagnostics. This article first reviews conventional diagnostic approaches used in food allergy. Second, it reviews recent efforts to develop novel biomarkers and in vitro diagnostics. Third, it summarizes the microfluidic methods developed thus far for food allergy diagnosis. The article concludes with a discussion of future opportunities for using microfluidic methods for achieving precision diagnostics in food allergy, including multiplexing the detection of multiple biomarkers, sampling of tissue-resident cytokines and immune cells, and multi-organ-on-a-chip technology.

IgE allergy diagnostics and other relevant tests in allergy, a World Allergy Organization position paper

Currently, testing for immunoglobulin E (IgE) sensitization is the cornerstone of diagnostic evaluation in suspected allergic conditions. This review provides a thorough and updated critical appraisal of the most frequently used diagnostic tests, both in vivo and in vitro. It discusses skin tests, challenges, and serological and cellular in vitro tests, and provides an overview of indications, advantages and disadvantages of each in conditions such as respiratory, food, venom, drug, and occupational allergy. Skin prick testing remains the first line approach in most instances; the added value of serum specific IgE to whole allergen extracts or components, as well as the role of basophil activation tests, is evaluated. Unproven, non-validated, diagnostic tests are also discussed. Throughout the review, the reader must bear in mind the relevance of differentiating between sensitization and allergy; the latter entails not only allergic sensitization, but also clinically relevant symptoms triggered by the culprit allergen.

Electroosmotic flow velocity in DNA modified nanochannels

Electroosmotic flow (EOF) is systematically investigated in DNA grafted hard PDMS (h-PDMS) channels with size ranging from 50 nm to 2.5 μm by using the current-slope method. The effects of the DNA types, the incubation time in the process of surface modification, and the pH value, ionic concentration of electrolyte solutions, and the UV (ultraviolet) illumination on the velocity of electroosmotic flow are experimentally studied. It is found that the DNA type and the incubation time of DNAs affect the grafting density and the surface charge on the channel walls, thus influencing the EOF velocity. In the DNA modified channels, the pH effects on EOF velocity become less prominent compared with that in the pristine channels. On the contrary, UV illumination can increase the EOF velocity significantly in the DNA modified channels, whereas takes unapparent effects on EOF velocity in the pristine channels. The effects of ionic concentration on EOF are also studied in this paper. It is observed that EOF velocity is dependent on the channel size when the ionic concentration is low even without overlapped electric double layer (EDL) and is essentially independent of the channel size when the ionic concentration is high. Furthermore, with high ionic concentration and thin EDL, the EOF velocity can be enhanced by the coated DNA brushes on the channel surface.

An automatic integrated microfluidic system for allergy microarray chips

Billions of people suffer from allergies, though in many cases, the source allergen is unknown. If one knows which allergens to avoid, this would result in an improved quality of life. Since a rapid, high-throughput, automatic allergen detection method is of great need, an integrated system combining microfluidic techniques and microarray chips has been developed herein to automate the allergen detection process. The developed microfluidic system could automatically carry out the entire procedure such as reagent incubation, hybridization, transport, and washing without any intermediate step. The microarray chip could be easily detached from the microfluidic chip afterwards, enabling it to be read under a fluorescence scanner. The experimental results indicated that the developed microfluidic system can automatically perform all the incubation processes, including hybridization, reagent transportation, and washing. It is worth noting that active mixing has been applied in the present study which is different from our previous study using micro-channels for passive incubation. Comparable results to a conventional benchtop approach were obtained in ∼30% less time with ∼25% less samples/reagents. Similar results were also demonstrated while detecting immunoglobulin E samples. The developed system could therefore provide a rapid, reliable, and automated approach for detecting allergen-specific antibodies in human serum.

An optical pickup enzyme-linked immunosorbent assay (ELISA) with a microfluidic disk

We evaluated optical pickup ELISA with an original microfluidic disk that contains eight radially arranged channels, which enable semi-automatic sample loading and washing. This disk-shaped chip composed of acrylic plates was fabricated by CO₂ laser machining and capture antibodies were immobilized in the channels. After the immunoreaction with antigens and enzyme-linked secondary antibodies, an enzyme-catalyzed nanoaggregation of o-phenylenediamine was detected by measuring the reflectivity change of a laser beam focused in the channel. The assay of C-reactive protein (CRP) was successfully performed in a short amount of time (approximately 20 min from CRP loading). The limit of detection was determined to be 2 ng mL⁻¹, which is more sensitive as compared with conventional ELISA using microplates.

Optical pickup ELISA with an original microfluidic disk, which enable semi-automatic sample loading and washing, was developed. The rapid and sensitive assay of C-reactive protein (CRP) was successfully performed.

Self-powered switch-controlled nucleic acid extraction system

Over the past few decades, lab-on-a-chip (LOC) technologies have played a great role in revolutionizing the way in vitro medical diagnostics are conducted and transforming bulky and expensive laboratory instruments and labour-intensive tests into easy to use, cost-effective miniaturized systems with faster analysis time, which can be used for near-patient or point-of-care (POC) tests. Fluidic pumps and valves are among the key components for LOC systems; however, they often require on-line electrical power or batteries and make the whole system bulky and complex, therefore limiting its application to POC testing especially in low-resource setting. This is particularly problematic for molecular diagnostics where multi-step sample processing (e.g. lysing, washing, elution) is necessary. In this work, we have developed a self-powered switch-controlled nucleic acid extraction system (SSNES). The main components of SSNES are a powerless vacuum actuator using two disposable syringes and a switchgear made of PMMA blocks and an O-ring. In the vacuum actuator, an opened syringe and a blocked syringe are bound together and act as a working syringe and an actuating syringe, respectively. The negative pressure in the opened syringe is generated by a restoring force of the compressed air inside the blocked syringe and utilized as the vacuum source. The Venus symbol shape of the switchgear provides multiple functions including being a reagent reservoir, a push-button for the vacuum actuator, and an on-off valve. The SSNES consists of three sets of vacuum actuators, switchgears and microfluidic components. The entire system can be easily fabricated and is fully disposable. We have successfully demonstrated DNA extraction from a urine sample using a dimethyl adipimidate (DMA)-based extraction method and the performance of the DNA extraction has been confirmed by genetic (HRAS) analysis of DNA biomarkers from the extracted DNAs using the SSNES. Therefore, the SSNES can be widely used as a powerless and disposable system for DNA extraction and the syringe-based vacuum actuator would be easily utilized for diverse applications with various microchannels as a powerless fluidic pump.

Microfluidic system for high-throughput immunoglobulin-E analysis from clinical serum samples

Rapid and high-throughput analytical techniques for IgE that requires a small serum amount are very important, especially for pediatric patients. In these patients, blood is collected from veins, which is painful compared to fingertip blood collection. Herein, a novel microfluidic system capable of high-throughput parallel analyses of allergen-specific IgE from small amounts of patient serum was successfully developed. A six-plex immunoassay was constructed within a microfluidic chip, and the entire system was validated using samples from clinical patients. Major antigens from house dust mite (Dermatophagoides farinae and Blomia tropicalis), cat (Felis domesticus), fungus (Cladosporium herbarum), ragweed (Humulus japonicas), and tree pollen (Platanus acerifolia) were used as analysis targets. Sample consumption decreased to <0.05 µL compared with the 480µL serum consumption by fluoroenzyme immunoassay (UniCAP system Pharmacia Diagnostics AB, Uppsala, Sweden), the 50 µL serum consumption by enzyme-linked immune sorbent assay (ELISA), or the 1.5 µL serum consumption by conventional protein chip analysis. Analysis duration, reagent cost, and total cost for each measurement were also considerably decreased. The assay showed good accuracy and sensitivity toward the clinical samples. A significant correlation of allergen-specific IgE levels was found among the microfluidic assay, UniCAP system, and ELISA.

Recent trends in rapid environmental monitoring of pathogens and toxicants: potential of nanoparticle-based biosensor and applications

Of global concern, environmental pollution adversely affects human health and socioeconomic development. The presence of environmental contaminants, especially bacterial, viral, and parasitic pathogens and their toxins as well as chemical substances, poses serious public health concerns. Nanoparticle-based biosensors are considered as potential tools for rapid, specific, and highly sensitive detection of the analyte of interest (both biotic and abiotic contaminants). In particular, there are several limitations of conventional detection methods for water-borne pathogens due to low concentrations and interference with various enzymatic inhibitors in the environmental samples. The increase of cells to detection levels requires long incubation time. This review describes current state of biosensor nanotechnology, the advantage over conventional detection methods, and the challenges due to testing of environmental samples. The major approach is to use nanoparticles as signal reporter to increase output rather than spending time to increase cell concentrations. Trends in future development of novel detection devices and their advantages over other environmental monitoring methodologies are also discussed.

Industrial lab-on-a-chip: design, applications and scale-up for drug discovery and delivery

Microfluidics is an emerging and promising interdisciplinary technology which offers powerful platforms for precise production of novel functional materials (e.g., emulsion droplets, microcapsules, and nanoparticles as drug delivery vehicles- and drug molecules) as well as high-throughput analyses (e.g., bioassays, detection, and diagnostics). In particular, multiphase microfluidics is a rapidly growing technology and has beneficial applications in various fields including biomedicals, chemicals, and foods. In this review, we first describe the fundamentals and latest developments in multiphase microfluidics for producing biocompatible materials that are precisely controlled in size, shape, internal morphology and composition. We next describe some microfluidic applications that synthesize drug molecules, handle biological substances and biological units, and imitate biological organs. We also highlight and discuss design, applications and scale up of droplet- and flow-based microfluidic devices used for drug discovery and delivery.

New route for fast detection of antibodies against zoonotic pathogens in sera of slaughtered pigs by means of flow-through chemiluminescence immunochips

The research on fast screening methods for antibodies against zoonotic pathogens in slaughter animals is important for food safety in farming and meat-processing industries. As a proof-of-concept study, antibodies against the emerging zoonotic pathogen hepatitis E virus (HEV) and enteropathogenic Yersinia spp. were analyzed in parallel using immobilized recombinant antigens (rAgs) of HEV genotypes 1 and 3 and Yersinia outer protein D (YopD) on a flow-through chemiluminescence immunochip. These rAgs are usually part of commercially available line immunoassays (LIAs) used for human diagnostics. In this study, sera from slaughtered pigs were tested on the microarray analysis platform MCR 3 to detect anti-HEV and anti-Yersinia IgG. The new method was characterized regarding signal reproducibility and specificity. The analytical performance was compared with in-house enzyme-linked immunosorbent assay (ELISA) and a LIA based on recomLine HEV (Mikrogen) or the ELISA test kit pigtype Yersinia Ab (Qiagen), respectively. The immunochip revealed the highest analytical sensitivity and was processed in 9 min automatically on the MCR 3. A comparative screening of swine serum samples from Bavarian slaughterhouses regarding anti-HEV and anti-Yersinia IgG seroprevalence was conducted. By using the LIA, 78% of the sera were tested positive for HEV antibodies. The immunochip and the ELISA identified anti-HEV IgG in 96% and 93% of the tested samples using the O2C-gt1 and O2C-gt3 rAg, respectively. The screening for anti-Yersinia IgG resulted in 86% positive findings using the immunochip and 57% and 48% for the ELISA methods, respectively, indicating a higher detection capability of the new method. Serum samples of slaughtered pigs could be analyzed faster and in an automated way on the microarray analysis platform MCR 3 which shows the great potential of the new immunochip assay format for multiplexed serum screening purposes.

Effects of sample delivery on analyte capture in porous bead sensors

Sample delivery is a crucial aspect of point-of-care applications where sample volumes need to be low and assay times short, while providing high analytical and clinical sensitivity. In this paper, we explore the influence of the factors surrounding sample delivery on analyte capture in an immunoassay-based sensor array manifold of porous beads resting in individual wells. We model using computational fluid dynamics and a flow-through device containing beads sensitized specifically to C-reactive protein (CRP) to explore the effects of volume of sample, rate of sample delivery, and use of recirculation vs. unilateral delivery on the effectiveness of the capture of CRP on and within the porous bead sensor. Rate of sample delivery lends to the development of a time-dependent, shrinking depletion region around the bead exterior. Our findings reveal that at significantly high rates of delivery, unique to porous bead substrates, capture at the rim of the bead is reaction-limited, while capture in the interior of the bead is transport-limited. While the fluorescence signal results from the aggregate of captured material throughout the bead, multiple kinetic regimes exist within the bead. Further, under constant pressure conditions dictated by the array architecture, we reveal the existence of an optimal flow rate that generates the highest signal, under point-of-care constraints of limited-volume and limited-time. When high sensitivity is needed, recirculation can be implemented to overcome the analyte capture limitations due to volume and time constraints. Computational simulations agree with experimental results performed under similar conditions.

Microarray technology for major chemical contaminants analysis in food: current status and prospects

Chemical contaminants in food have caused serious health issues in both humans and animals. Microarray technology is an advanced technique suitable for the analysis of chemical contaminates. In particular, immuno-microarray approach is one of the most promising methods for chemical contaminants analysis. The use of microarrays for the analysis of chemical contaminants is the subject of this review. Fabrication strategies and detection methods for chemical contaminants are discussed in detail. Application to the analysis of mycotoxins, biotoxins, pesticide residues, and pharmaceutical residues is also described. Finally, future challenges and opportunities are discussed.

Microfluidic LIPS for serum antibody detection: demonstration of a rapid test for HSV-2 infection

There is great interest in point-of-care antibody testing for the diagnosis of infectious and autoimmune diseases. As a first step in the development of self-contained and miniaturized devices for highly quantitative antibody detection, we demonstrate the application of Luciferase Immunoprecipitation Systems (LIPS) technology in a microfluidic format. Protein A/G was immobilized on the walls of PDMS-glass microchannels of 500 nL volume. The assay proceeds with the simultaneous introduction of plasma and Renilla luciferase-tagged antigens. Following washing, coelenterazine substrate was added and bound antigen-luciferase measured by chemiluminescence. Total assay time, including rinsing and detection, is under 10 min. Using these stable microfluidic devices, high diagnostic performance (100% sensitivity and 100% specificity) was achieved for the diagnosis of HSV-2 infection. Based on these findings, the LIPS microfluidic format should readily lend itself to automation and the transfer to portable instrumentation.

A lab-on-a-chip for rapid blood separation and quantification of hematocrit and serum analytes

In this work, a new lab-on-a-chip for rapid analysis of low volume blood samples was designed, fabricated and demonstrated for integration of serum separation, hematocrit evaluation, and protein quantitation. Blood separation was achieved using microchannel flow-based separation. A novel method for evaluating hematocrit from microfluidic flow-separated blood samples was developed using gray scale analysis of a point-and-shoot digital photograph of separated blood in a micochannel. Protein quantitation was subsequently performed in a high surface area-to-volume ratio microfluidic chemiluminescent immunoassay using cell depleted serum produced by microfluidic flow-based separation of whole blood samples. All three steps were achieved in a single microchannel with separation of blood samples and hematocrit evaluation in less than 1 min, and protein quantitation in 5 min.

Thiolene-based microfluidic flow cells for surface plasmon resonance imaging

Thiolene-based microfluidic devices have been coupled with surface plasmon resonance imaging (SPRI) to provide an integrated platform to study interfacial interactions in both aqueous and organic solutions. In this work, we develop a photolithographic method that interfaces commercially available thiolene resin to gold and glass substrates to generate microfluidic channels with excellent adhesion that leave the underlying sensor surface free from contamination and readily available for surface modification through self-assembly. These devices can sustain high flow rates and have excellent solvent compatibility even with several organic solvents. To demonstrate the versatility of these devices, we have conducted nanomolar detection of streptavidin-biotin interactions using in situ SPRI.

Heterogeneous immunoassays in microfluidic format using fluorescence detection with integrated amorphous silicon photodiodes

Miniaturization of immunoassays through microfluidic technology has the potential to decrease the time and the quantity of reactants required for analysis, together with the potential of achieving multiplexing and portability. A lab-on-chip system incorporating a thin-film amorphous silicon (a-Si:H) photodiode microfabricated on a glass substrate with a thin-film amorphous silicon-carbon alloy directly deposited above the photodiode and acting as a fluorescence filter is integrated with a polydimethylsiloxane-based microfluidic network for the direct detection of antibody-antigen molecular recognition reactions using fluorescence. The model immunoassay used consists of primary antibody adsorption to the microchannel walls followed by its recognition by a secondary antibody labeled with a fluorescent quantum-dot tag. The conditions for the flow-through analysis in the microfluidic format were defined and the total assay time was 30 min. Specific molecular recognition was quantitatively detected. The measurements made with the a-Si:H photodiode are consistent with that obtained with a fluorescence microscope and both show a linear dependence on the antibody concentration in the nanomolar-micromolar range.

Microarrayed allergen molecules for the diagnosis of allergic diseases

IgE-mediated allergic diseases are among the most prevalent diseases worldwide. The use of extracts in the skin test and the additional use of IgE testing still represent the current basis for the diagnostic work-up. During the past 30 years, knowledge of the molecular structure of allergens has increased dramatically, and the characterization and production of allergenic molecules, as natural purified compounds or recombinant products, is allowing us to approach the allergy diagnostic work-up differently. Much of this is based on the adoption of microtechnology since the first release of a biochip for IgE detection. Its use has prompted the development of new concepts linked to the diagnosis of allergic diseases. This review describes the background of allergy diagnosis and the tools currently used for specific IgE detection. It gives insight into the most recent advancement in the field of biotechnology leading to allergenic molecule availability, microtechnology leading to the routine use of protein biochips for IgE detection, and how they should be combined with information technology.

Glycan and lectin microarrays for glycomics and medicinal applications

Three different array formats to study a challenging field of glycomics are presented here, based on the use of a panel of immobilized glycan or lectins, and on in silico computational approach. Glycan and lectin arrays are routinely used in combination with other analytical tools to decipher a complex nature of glycan-mediated recognition responsible for signal transduction of a broad range of biological processes. Fundamental aspects of the glycan and lectin array technology are discussed, with the focus on the choice and availability of the biorecognition elements, fabrication protocols, and detection platforms involved. Moreover, practical applications of both technologies especially in the field of clinical diagnostics are provided. The future potential of a complementary in silico array technology to reveal details of the protein-glycan-binding profiles is discussed here.

Immunoassays in microfluidic systems

Immunoassays have greatly benefited from miniaturization in microfluidic systems. This review, which summarizes developments in microfluidics-based immunoassays since 2000, includes four sections, focusing on the configurations of immunoassays that have been implemented in microfluidics, the main fluid handling modalities that have been used for microfluidic immunoassays, multiplexed immunoassays in microfluidic platforms, and the emergence of label-free detection techniques. The field of microfluidic immunoassays is continuously improving and has great promise for the future.