Direct electrocatalytic oxidation of adenine and guanine on carbon ionic liquid electrode and the simultaneous determination

Preparation of electrochemical horseradish peroxidase biosensor with black phosphorene-zinc oxide nanocomposite and their applications

In this work, a novel and sensitive electrochemical biosensor was constructed based on a black phosphorene (BP) and nanosized zinc oxide (ZnO@BP) nanocomposite as a modifier, which was used for the immobilization of horseradish peroxidase (HRP) on a carbon ionic liquid electrode (CILE). The ZnO@BP nanocomposite was synthesized by a simple in situ hydrothermal method with stripped black phosphorus nanoplates and ZnO. The ZnO@BP and HRP-modified electrode was developed by a casting method. ZnO@BP with highly conductivity, large surface area and good biocompatibility could maintain the bioactivity of HRP and accelerate the electron transfer rate. Cyclic voltammetry was used to study the direct electrochemistry of HRP on the Nafion/HRP/ZnO@BP/CILE with the appearance of a pair of distinct redox peaks. The constructed electrochemical HRP biosensor exhibited excellent electrocatalytic effects on the reduction of trichloroacetic acid and sodium nitrite. Real samples were detected with satisfactory results, which demonstrated the potential applications of this electrochemical HRP biosensor.

Preparation and Application of Electrochemical Horseradish Peroxidase Sensor Based on a Black Phosphorene and Single-Walled Carbon Nanotubes Nanocomposite

To design a new electrochemical horseradish peroxidase (HRP) biosensor with excellent analytical performance, black phosphorene (BP) nanosheets and single-walled carbon nanotubes (SWCNTs) nanocomposites were used as the modifier, with a carbon ionic liquid electrode (CILE) as the substrate electrode. The SWCNTs-BP nanocomposite was synthesized by a simple in situ mixing procedure and modified on the CILE surface by the direct casting method. Then HRP was immobilized on the modified electrode with Nafion film. The electrocatalysis of this electrochemical HRP biosensor to various targets was further explored. Experimental results indicated that the direct electrochemistry of HRP was realized with a pair of symmetric and quasi-reversible redox peaks appeared, which was due to the presence of SWCNTs-BP on the surface of CILE, exhibiting synergistic effects with high electrical conductivity and good biocompatibility. Excellent electrocatalytic activity to trichloroacetic acid (TCA), sodium nitrite (NaNO₂), and hydrogen peroxide (H₂O₂) were realized, with a wide linear range and a low detection limit. Different real samples, such as a medical facial peel solution, the soak water of pickled vegetables, and a 3% H₂O₂ disinfectant, were further analyzed, with satisfactory results, further proving the potential practical applications for the electrochemical biosensor.

Silica nanochannels boosting Ru(bpy)32+-mediated electrochemical sensor for the detection of guanine in beer and pharmaceutical samples

Vertically ordered mesoporous silica film (VMSF) with uniform mesoporous channels perpendicular to electrode substrate has a wide range of applications in direct electroanalysis of complex samples. However, the detection of nucleic acid bases is difficult to realize at the commonly used VMSF-modified indium tin oxide (VMSF/ITO) electrode due to the high overpotentials of underlying ITO for many small organic molecules. In this work, we demonstrated an electrochemical method for the sensitive detection of guanine (G) by integration of VMSF/ITO and tris(2,2′-bipyridine) ruthenium (II) [Ru(bpy)₃²⁺] redox mediator. Ru(bpy)₃²⁺ electrostatically accumulated by VMSF is able to act as an electron shuttle between G and underlying ITO surface, showing electrocatalytic oxidation of G and enabling the quantitative determination of G with a limit of detection (LOD) of 0.058 μM and a limit of quantitation (LOQ) of 0.2 μM. Electrochemical detection performance for G could be regulated by changing the pH of the supporting electrolyte and the content of Ru(bpy)₃²⁺, achieving a wide dynamic linear range from 0.2 to 10 μM (R² = 0.999), 2 to 100 μM (R² = 0.999), and 10 to 500 μM (R² = 0.998). Furthermore, owing to the good anti-fouling and anti-interference ability of VMSF, this simply sensing strategy can be applied to the direct and rapid detection of G in beer samples, and the detection of ganciclovir (G analog) content in ganciclovir eye drops.

Enhancement of electrode performance through surface modification using carbon nanotubes and porous gold nanostructures

Recently, the demand for the sensitive detection of nanomaterials and biomolecules has been increasing for evaluating the toxicity of nanomaterials and early diagnosis of diseases. Although many studies have developed new detection assays, these are heavily influenced by the capabilities of the detection equipment. Therefore, the aim of the present study was to improve electrode performance by modifying the surface of the detection electrode using a simple method. Electrode surface modification was performed using carbon nanotubes (CNT) and porous gold nanostructures (NS) with excellent electrical and chemical properties. Through the simple physical deposition of CNT and electrochemical reduction of NS, the increasement of the electrode surface area was achieved. Because of the CNTs attached to the electrodes at the first step, the metal ions constituting the NS can adhere well to the electrodes. Nanoparticles with a porous structure can be generated through electrochemical reduction (cyclic voltammetry) of metal ions attached to electrodes. Consequently, the surface area of the electrode increased and electrochemical performance was improved (confirmed by atomic force microscopy, Nyquist plot and Bode plot). To quantitatively confirm the improvement of electrode performance according to the surface change through the proposed treatment technique, DNA was detected. Unlike previous surface modification studies, the developed surface treatment technique can be applied to a variety of detection equipment. To confirm this, the detection was performed using two detection devices with different operating principles. DNA detection using the two types of equipment confirmed that the detection limit was increased by approximately 1000-fold through applying a simple surface treatment. In addition, this method is applicable to detect various sizes of nanomaterials. The method proposed in this study is simple and has the advantage that it can be applied to various devices and various materials.

Electroanalysis of Biomolecules: Rational Selection of Sensor Construction

Methods of electrochemical analysis of biological objects based on the reaction of electro-oxidation/electro-reduction of molecules are presented. Polymer nanocomposite materials that modify electrodes to increase sensitivity of electrochemical events on the surface of electrodes are described. Examples of applications electrochemical biosensors constructed with nanocomposite material for detection of biological molecules are presented, advantages and drawbacks of different applications are discussed.

Graphene Oxide Nanoribbons in Chitosan for Simultaneous Electrochemical Detection of Guanine, Adenine, Thymine and Cytosine

Herein, graphene oxide nanoribbons (GONRs) were obtained from the oxidative unzipping of multi-walled carbon nanotubes. Covalent coupling reaction of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) and N-hydroxy succinimide (NHS) with amine functional groups (-NH₂) of the chitosan natural polymer (CH) was used for entrapping GONRs on the activated glassy carbon electrode (GCE/GONRs-CH). The nanocomposite was characterized by high-resolution transmission electron microscopy (HRTEM), and field-emission scanning electron microscopy (FESEM). In addition, the modification steps were monitored using FTIR. The nanocomposite-modified electrode was used for the simultaneous electrochemical determination of four DNA bases; guanine (G), adenine (A), thymine (T) and cytosine (C). The nanocomposite-modified GCE displayed a strong, stable and continuous four oxidation peaks during electrochemistry detection at potentials 0.63, 0.89, 1.13 and 1.27 V for G, A, T and C, respectively. The calibration curves were linear up to 256, 172, 855 and 342 μM with detection limits of 0.002, 0.023, 1.330 and 0.641 μM for G, A, T and C, respectively. The analytical performance of the GCE/GONRs-CH has been used for the determination of G, A, T and C in real samples and obtained a recovery percentage from 91.1%-104.7%. Our preliminary results demonstrated that GCE/GONRs-CH provided a promising platform to detect all four DNA bases for future studies on DNA damage and mutations.

A copper-based metal–organic framework/graphene nanocomposite for the sensitive and stable electrochemical detection of DNA bases

A simple and easy-operation electrode modification strategy was proposed using Cu-MOF/GO nanohybrids for physiologists and pathologists for the feasible and reliable simultaneous electrochemical detections of DNA bases, namely guanine and adenine.

Synthesis and utilization of Co3O4 doped carbon nanofiber for fabrication of hemoglobin-based electrochemical sensor

In this paper cobalt oxide (Co₃O₄) nanoparticles were mixed with polyacrylonitrile to prepare Co₃O₄ doped carbon nanofiber (CNF) composite by electrospinning and carbonization, which was further used to modify on carbon ionic liquid electrode (CILE). Hemoglobin (Hb) was immobilized on Co₃O₄-CNF/CILE surface with Nafion acted as the protective film to fabricate an electrochemical biosensor (Nafion/Hb/Co₃O₄-CNF/CILE). Electrochemical behavior of Hb on the electrode was investigated with a pair of quasi-reversible redox peak appeared on cyclic voltammogram and electrochemical parameters were calculated. Moreover, this biosensor had good analytical capabilities for electrocatalytic reduction of different substrates including trichloroacetic acid, potassium bromate and sodium nitrite with wider detection range from 40.0 to 260.0 mmol L^-1, 0.1 to 48.0 mmol L^-1 and 1.0 to 12.0 mmol L^-1 by cyclic voltammetry, respectively. The proposed method showed excellent anti-interferences ability with good selectivity and was successful used for quantitative detection of real samples, which displayed the potential applications to develop into a new analytical device.

Sensitive detection of ascorbic acid using screen-printed electrodes modified by electroactive melanin-like nanoparticles

In this work, we report on the design of an enzyme-less sensitive and selective electrochemical electrode for ascorbic acid (AA) detection using a modified screen-printed electrode of melanin-like nanoparticles (Mel-NPs). Cyclic voltammetry shows that the melanin-modified electrode exhibits high electrocatalytic activity for ascorbic acid. The melanin-like nanoparticles serve as a shuttle to transport electrons from ascorbic acid to the electrode surface. The modified electrode is endowed with a large dynamic window ranging from 5 to 500 ppb. The detection and quantification limits were estimated to be 0.07 and 0.23 ppb, respectively. The modified electrode was successfully used to determine AA in human blood serum, urine and saliva with satisfactory recovery levels.

A melanin-like nanoparticle modified screen-printed electrode for enzyme-less detection of ascorbic acid.

An efficient electrode for simultaneous determination of guanine and adenine using nano-sized lead telluride with graphene

Herein, lead telluride (PbTe) nanocrystals were chemically synthesized at room temperature via reduction of homogeneous mixtures of tartrate complexes of Pb²⁺ and Te⁴⁺ with sodium borohydride.

A novel electrochemical sensor based on Cu@Ni/MWCNTs nanocomposite for simultaneous determination of guanine and adenine

A novel electrochemical sensing platform based on combination of multi-walled carbon nanotubes and copper-nickel hybrid nanoparticles (Cu@Ni/MWCNTs) was developed for simultaneous detection of guanine (G) and adenine (A). The Ni/MWCNTs and Cu@Ni/MWCNTs nanocomposites were characterized by transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS). The electrochemical behaviors of G and A on the modified electrode were explored by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) in phosphate buffer with pH 3.0. Under the optimal conditions, electrical signals were linear over the concentration ranges from 5.0 to 180μM and 8.0 to 150μM for simultaneous determination G and A with the detection limit as low as 0.35μM and 0.56μM (S/N = 3), respectively. Furthermore, linear concentration ranges in individual determination are 1.0-180μM and 2.0-150μM with detection limits of 0.17μM and 0.33μM (S/N = 3) for G and A, respectively. The sensor was successfully used to quantify G and A in real samples. The Cu@Ni/MWCNTs composite presented here can serve as a promising candidate for developing electrochemical sensor devices and plays an important role in widespread fields.

Graphite-Based Nanocomposite Electrochemical Sensor for Multiplex Detection of Adenine, Guanine, Thymine, and Cytosine: A Biomedical Prospect for Studying DNA Damage

Guanine (G), adenine (A), thymine (T), and cytosine (C) are the four basic constituents of DNA. Studies on DNA composition have focused especially on DNA damage and genotoxicity. However, the development of a rapid, simple, and multiplex method for the simultaneous measurement of the four DNA bases remains a challenge. In this study, we describe a graphite-based nanocomposite electrode (Au-rGO/MWCNT/graphite) that uses a simple electro-co-deposition approach. We successfully applied the developed sensor for multiplex detection of G, A, T, and C, using square-wave voltammetry. The sensor was tested using real animal and plant DNA samples in which the hydrolysis of T and C could be achieved with 8 mol L^-1 of acid. The electrochemical sensor exhibited excellent sensitivity (G = 178.8 nA/μg mL^-1, A = 92.9 nA/μg mL^-1, T = 1.4 nA/μg mL^-1, and C = 15.1 9 nA/μg mL^-1), low limit of detection (G, A = 0.5 μg mL^-1; T, C = 1.0 μg mL^-1), and high selectivity in the presence of common interfering factors from biological matrixes. The reliability of the established method was assessed by method validation and comparison with the ultraperformance liquid chromatography technique, and a correlation of 103.7% was achieved.

Electrochemical sensor for individual and simultaneous determination of guanine and adenine in biological fluids and in DNA based on a nano-In–ceria modified glassy carbon paste electrode

A novel, simple and sensitive electrochemical method for individual and simultaneous determination of guanine and adenine was developed using an In doped ceria nanoparticle modified glassy carbon paste electrode (In–CeO₂/GCPE).

Nickel oxide nanoparticles/ionic liquid crystal modified carbon composite electrode for determination of neurotransmitters and paracetamol

Ionic liquid crystals mimic the natural bio-based ionic liquid crystals such as cell membrane structures in their interactions with drugs.

A carbon ion beam irradiated MWCNT/AuNPs composite sensor for a sensitive assay of purine-nucleosides of DNA

Sensor for purine nucleosides has been developed using irradiation with high energy carbon ion beam.

Ionic liquids coated Fe3O4 based inorganic-organic hybrid materials and their application in the simultaneous determination of DNA bases

Ionic liquids (ILs) coated Fe3O4 based inorganic-organic hybrid materials (represented as Fe3O4/ILs) were synthesized. ILs such as methylimidazolium chloride ([Hmim][Cl]) and 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]) were investigated. For comparative study, quaternary ammonium salts such as choline chloride, cetyltrimethylammonium bromide [C16H33N(CH3)3][Br], and trimethylstearylammonium chloride [C18H37N(CH3)3][Cl] were also investigated. Materials were characterized by X-ray diffraction, nitrogen sorption, Fourier transform infrared and scanning/transmission electron microscopy. Electrochemical sensors based on Fe3O4/ILs modified glassy carbon electrodes were fabricated for the simultaneous determination of all four DNA bases. The electrochemical behavior of DNA bases was investigated in detail. Various reaction parameters such as effect of scan rate, number of electrons involved in the rate determining step, electron transfer coefficient, surface adsorbed concentration, and the electrode reaction standard rate constant were investigated. Catalytic activity obtained at various Fe3O4/ILs modified electrodes was explained using DFT calculation. The analytical performance of the sensor was demonstrated in the simultaneous determination of guanine, adenine, thymine, and cytosine in calf thymus DNA sample.