Hydrogen peroxide biosensor based on the direct electrochemistry of myoglobin immobilized on silver nanoparticles doped carbon nanotubes film

Immobilized phytases: an overview of different strategies, support material, and their applications in improving food and feed nutrition

Phytases are the most widely used food and feed enzymes, which aid in nutritional improvement by reducing anti-nutritional factor. Despite the benefits, enzymes usage in the industry is restricted by several factors such as their short life-span and poor reusability, which result in high costs for large-scale utilization at commercial scale. Furthermore, under pelleting conditions such as high temperatures, pH, and other factors, the enzyme becomes inactive due to lesser stability. Immobilization of phytases has been suggested as a way to overcome these limitations with improved performance. Matrices used to immobilize phytases include inorganic (Hydroxypatite, zeolite, and silica), organic (Polyacrylamide, epoxy resins, alginate, chitosan, and starch agar), soluble matrix (Polyvinyl alcohol), and nanomaterials including nanoparticles, nanofibers, nanotubes. Several surface analysis methods, including thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), and FTIR analysis, have been used to characterize immobilized phytase. Immobilized phytases have been used in a broad range of biotechnological applications such as animal feed, biodegradation of food phytates, preparations of myo-inositol phosphates, and sulfoxidation by vanadate-substituted peroxidase. This article provides information on different matrices used for phytase immobilization from the last two decades, including the process of immobilization and support material, surface analysis techniques, and multifarious biotechnological applications of the immobilized phytases.

A Silver-Loaded Exfoliated Graphite Nanocomposite Anti-Fouling Electrochemical Sensor for Bisphenol A in Thermal Paper Samples

Silver nanoparticles (AgNPs) were synthesized separately and loaded onto the expanded layers of exfoliated graphite (EG) to form a silver nanoparticle-exfoliated graphite nanocomposite (AgNPs-EG). The AgNPs-EG was compressed into a pellet (0.6 cm in diameter) and used to prepare an electrochemical sensor for bisphenol A (BPA) in standard samples and in thermal paper. The synthesized materials were characterized by ultraviolet-visible spectrophotometry, X-ray diffraction spectroscopy, scanning electron microscopy, and energy-dispersive X-ray. The electrochemical behavior of BPA on the AgNPs-EG sensor was investigated by cyclic voltammetry and square wave voltammetry. Under optimized experimental conditions, the oxidation peak current was linearly proportional to bisphenol A concentrations in the range from 5.0 to100 μM, with a coefficient of determination (R2 ) of 0.9981. The obtained limit of detection of the method was 0.23 μM. The fabricated sensor was able to overcome electrode fouling with good reproducibility (RSD = 2.62%, n = 5) by mechanical polishing of the electrode on emery paper. The proposed method was successfully applied to determine bisphenol A in thermal paper samples and demonstrated good accuracy of 93.1 to 113% recovery.

Detection Technologies for Reactive Oxygen Species: Fluorescence and Electrochemical Methods and Their Applications

Reactive oxygen species (ROS) have been found in plants, mammals, and natural environmental processes. The presence of ROS in mammals has been linked to the development of severe diseases, such as diabetes, cancer, tumors, and several neurodegenerative conditions. The most common ROS involved in human health are superoxide (O2•-), hydrogen peroxide (H2O2), and hydroxyl radicals (•OH). Organic and inorganic molecules have been integrated with various methods to detect and monitor ROS for understanding the effect of their presence and concentration on diseases caused by oxidative stress. Among several techniques, fluorescence and electrochemical methods have been recently developed and employed for the detection of ROS. This literature review intends to critically discuss the development of these techniques to date, as well as their application for in vitro and in vivo ROS detection regarding free-radical-related diseases. Moreover, important insights into and further steps for using fluorescence and electrochemical methods in the detection of ROS are presented.

Carbon Nitride Nanosheet and Myoglobin Modified Electrode for Electrochemical Sensing Investigations

Background:

Carbon-based nanomaterials, especially carbon nitride (C3N4) has attracted tremendous interest in biosensor applications. Meanwhile, the mechanism of redox protein sensing and related electrocatalytic reactions can provide a valid basis for understanding the process of biological redox reaction.

Objective:

The aim of this paper is to construct a new electrochemical enzyme sensor to achieve direct electron transfer of myoglobin (Mb) on CILE surface and display electrocatalytic reduction activity to catalyze trichloroacetic acid (TCA) and H2O2.

Methods:

The working electrode was fabricated based on ionic liquid modified Carbon Paste Electrode (CILE) and C3N4 nanosheets were modified on the CILE surface, then Mb solution was fixed on C3N4/CILE surface and immobilized by using Nafion film. The as-prepared biosensor displayed satisfactory electrocatalytic ability towards the reduction of TCA and H2O2 in an optimum pH 7.0 buffer solution.

Results:

The results indicated that C3N4 modified electrode retained the activity of the enzyme and displayed quasi-reversible redox behavior in an optimum pH 7.0 buffer solution. The electrochemical parameters of the immobilized Mb on the electrode surface were further calculated with the results of the electron transfer number (n) as 1.27, the charge transfer coefficient (α) as 0.53 and the electrontransfer rate constant (ks) as 3.32 s-1, respectively. The Nafion/Mb/C3N4/CILE displayed outstanding electrocatalytic reduction activity to catalyze trichloroacetic acid and H2O2.

Conclusion:

The Nafion/Mb/C3N4/CILE displayed outstanding electrocatalytic reduction, which demonstrated the promising applications of C3N4 nanosheet in the field electrochemical biosensing.

Efficiency improvement in non-enzymatic H2O2 detection induced by the simultaneous synthesis of Au and Ag nanoparticles in an RGO/Au/Fe3O4/Ag nanocomposite

Developing a quick and precise technique for hydrogen peroxide (H₂O₂) detection would open up a new class of technologies for biological, medical and chemical applications.

Myoglobin- and Hydroxyapatite-Doped Carbon Nanofiber-Modified Electrodes for Electrochemistry and Electrocatalysis

In this paper, a hydroxyapatite (HAp)-doped carbon nanofiber (CNF)-modified carbon ionic liquid electrode (CILE) was prepared and used for the investigation on the direct electrochemistry and electrocatalysis of myoglobin (Mb). HAp nanoparticles were mixed within a polyacrylonitrile (PAN) solution, and a HAp@PAN nanofiber was synthesized by electrospinning process, which was further controlled by carbonization at 800 °C for 2 h in a nitrogen atmosphere to get a HAp@CNF nanocomposite. Various techniques were used to check the physicochemical properties of HAp@CNF. Mb was mixed with a HAp@CNF dispersion solution and casted on the surface of CILE to obtain an electrochemical sensing platform. The direct electrochemistry of Mb on the modified electrode was checked when a pair of enhanced redox waves appeared, indicating the direct electron transfer of Mb. HAp@CNF exhibited high conductivity, good biocompatibility, and large surface area, which was beneficial for Mb immobilization. The modified electrode showed excellent electrocatalytic activity toward the reduction of trichloroacetic acid and sodium nitrite, which was further used to establish a new electroanalytical method. Real samples were analyzed by the proposed method with satisfactory results.

Graphene blended with SnO2 and Pd-Pt nanocages for sensitive non-enzymatic electrochemical detection of H2O2 released from living cells

This paper described a novel, facile and nonenzymatic electrochemical biosensor to detect hydrogen peroxide (H₂O₂). The sensor was fabricated based on Pd-Pt nanocages and SnO₂/graphene nanosheets modified electrode (PdPt NCs@SGN/GCE). The electrochemical behavior of PdPt NCs@SGN/GCE exhibited excellent catalytic activity toward H₂O₂ with fast response, high selectivity, superior sensitivity, low detection limit of 0.3 μM and large linear range from 1 μM to 300 μM. Under these obvious advantages, the constructed biosensor provided to be reliable for determination of H₂O₂ secreted from human cervical cancer cells (Hela cells). Hence, the proposed biosensor is a promising candidate for detection of H₂O₂ in situ released from living cells in clinical diagnostics.

Core-shell heterostructured multiwalled carbon nanotubes@reduced graphene oxide nanoribbons/chitosan, a robust nanobiocomposite for enzymatic biosensing of hydrogen peroxide and nitrite

A robust nanobiocomposite based on core-shell heterostructured multiwalled carbon nanotubes@reduced graphene oxide nanoribbons (MWCNTs@rGONRs)/chitosan (CHIT) was described for the fabrication of sensitive, selective, reproducible and durable biosensor for hydrogen peroxide (H2O2) and nitrite (NO2-). The excellent physicochemical properties of MWCNTs@rGONRs such as, presence of abundant oxygen functionalities, higher area-normalized edge-plane structures and chemically active sites in combination with excellent biocompatibility of CHIT resulting in the versatile immobilization matrix for myoglobin (Mb). The most attractive property of MWCNTs@rGONRs which distinguishes it from other members of graphene family is its rich edge density and edge defects that are highly beneficial for constructing enzymatic biosensors. The direct electron transfer characteristics such as, redox properties, amount of immobilized active Mb, electron transfer efficiency and durability were studied. Being as good immobilization matrix, MWCNTs@rGONRs/CHIT is also an excellent signal amplifier which helped in achieving low detection limits to quantify H2O2 (1 nM) and NO2- (10 nM). The practical feasibility of the biosensor was successfully validated in contact lens cleaning solution and meat sample.

Enzymatic biosensor based on entrapment of d-amino acid oxidase on gold nanofilm/MWCNTs nanocomposite modified glassy carbon electrode by sol-gel network: Analytical applications for d-alanine in human serum

Sensing and determination of d-alanine is studied by using an enzymatic biosensor which was constructed on the basis of d-amino acid oxidase (DAAO) immobilization by sol-gel film onto glassy carbon electrode surface modified with nanocomposite of gold nanofilm (Au-NF) and multiwalled carbon nanotubes (MWCNTs). The Au-NF/MWCNT nanocomposite was prepared by applying the potentiostatic technique for electrodeposition of Au-NF on the MWCNT immobilized on glassy carbon electrode surface. The modified electrode is investigated by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), linear sweep voltammetry (LSV) and cyclic voltammetry(CV) techniques. The linear sweep voltammetry was used for determination of d-alanine and the results showed an excellent linear relationship between biosensor response and d-alanine concentration ranging from 0.25μM to 4.5μM with correction coefficient of 0.999 (n=20). Detection limit for the fabricated sensor was calculated about 20nM (for S/N=3) and sensitivity was about 56.1μAμM^-1cm^-2. The developed biosensor exhibited rapid and accurate response to d-alanine, a good stability (4 weeks) and an average recovery of 98.9% in human serum samples.

Insight into the phylogenetic relationship and structural features of vertebrate myoglobin family

Myoglobin (Mb) is studied to clarify the structure-function relationships in protein science. In this work, we report the results of a comparative analysis of amino acid sequences from 298 vertebrate Mbs. Forty-one high conserved residues were identified and seven of them were invariants [E18, G25, F43, V68, L72, H93 (proximal histidine) and H97]. E18 is the only invariant amino acid residue located out of the heme-pocket and Xe-cavities playing a role in interaction between the A and E-helices. A comparative analysis of several parameters related to amino acid composition shows an increase of average mass, accessible surface area and volume per residue from Actinopterygii to Mammalia and Aves. This may be due to an increased number of bulky residues reducing the non-specific cavities volume and thus improving the oxygen flow between the heme site and the outside of the protein. Finally, the phylogenetic analyses of Mb in vertebrates are consistent with an evolution that runs with the diversification of the species, but in which several episodes of gene duplication and lost have occurred, less frequently in the ancestors of great taxons, cartilaginous fishes and non-avian reptiles, most frequently in ray-finned fishes and mammals, and very frequently in birds.

Phytofabrication of bioinduced silver nanoparticles for biomedical applications

Synthesis of nanomaterials holds infinite possibilities as nanotechnology is revolutionizing the field of medicine by its myriad applications. Green synthesis of nanoparticles has become the need of the hour because of its eco-friendly, nontoxic, and economic nature. In this study, leaf extract of Rosa damascena was used as a bioreductant to reduce silver nitrate, leading to synthesis of silver nanoparticles (AgNPs) in a single step, without the use of any additional reducing or capping agents. The synthesized nanoparticles were characterized by the use of UV-visible spectroscopy, fourier transform infrared spectroscopy, dynamic light scattering, transmission electron microscopy, and field emission scanning electron microscopy. Time-dependent synthesis of AgNPs was studied spectrophotometrically. Synthesized AgNPs were found to possess flower-like spherical structure where individual nanoparticles were of 16 nm in diameter, whereas the agglomerated AgNPs were in the range of 60–80 nm. These biologically synthesized AgNPs exhibited significant antibacterial activity against Gram-negative bacterial species but not against Gram-positive ones (Escherichia coli and Bacillus cereus). Anti-inflammatory and analgesic activities were studied on a Wistar rat model to gauge the impact of AgNPs for a probable role in these applications. AgNPs tested positive for both these activities, although the potency was less as compared to the standard drugs.

Application of three-dimensional reduced graphene oxide-gold composite modified electrode for direct electrochemistry and electrocatalysis of myoglobin

In this paper a three-dimensional (3D) reduced graphene oxide (RGO) and gold (Au) composite was synthesized by electrodeposition and used for the electrode modification with carbon ionic liquid electrode (CILE) as the substrate electrode. Myoglobin (Mb) was further immobilized on the surface of 3D RGO-Au/CILE to obtain an electrochemical sensing platform. Direct electrochemistry of Mb on the modified electrode was investigated with a pair of well-defined redox waves appeared on cyclic voltammogram, indicating the realization of direct electron transfer of Mb with the modified electrode. The results can be ascribed to the presence of highly conductive 3D RGO-Au composite on the electrode surface that accelerate the electron transfer rate between the electroactive center of Mb and the electrode. The Mb modified electrode showed excellent electrocatalytic activity to the reduction of trichloroacetic acid in the concentration range from 0.2 to 36.0 mmol/L with the detection limit of 0.06 mmol/L (3σ).

Multiwalled carbon nanotubes noncovalently functionalized by electro-active amphiphilic copolymer micelles for selective dopamine detection

We have synthesized an electro-active amphiphilic copolymer with carbazole side chains via free radical polymerization using 7-(4-vinylbenzyloxy)-4-methyl coumarin and 9-(4-vinylbenzyl)-9H-carbazole as the monomers.

In situ generation of a high-performance Pd-polypyrrole composite with multi-functional catalytic properties

We report on a bottom up approach for the synthesis of a Pd-polypyrrole nanocomposite material. The composite material was characterized by means of different techniques, such as UV-vis, IR, and Raman spectroscopy, which offered information about the chemical structure of the polymer, whereas electron microscopy images provided information regarding the morphology of the composite material and the distribution of the metal particles in the polymer matrix. During the synthesis of the nanocomposite, the Pd nanoparticles act as a catalyst for a model proton-coupled electron transfer reaction. The Pd-polypyrrole nanocomposite material was also used as a catalyst for the electro-catalytic detection of tryptophan, a precursor for some neurotransmitters.

Nanomaterial-Based Electrochemical Immunosensors for Clinically Significant Biomarkers

Nanotechnology has played a crucial role in the development of biosensors over the past decade. The development, testing, optimization, and validation of new biosensors has become a highly interdisciplinary effort involving experts in chemistry, biology, physics, engineering, and medicine. The sensitivity, the specificity and the reproducibility of biosensors have improved tremendously as a result of incorporating nanomaterials in their design. In general, nanomaterials-based electrochemical immunosensors amplify the sensitivity by facilitating greater loading of the larger sensing surface with biorecognition molecules as well as improving the electrochemical properties of the transducer. The most common types of nanomaterials and their properties will be described. In addition, the utilization of nanomaterials in immunosensors for biomarker detection will be discussed since these biosensors have enormous potential for a myriad of clinical uses. Electrochemical immunosensors provide a specific and simple analytical alternative as evidenced by their brief analysis times, inexpensive instrumentation, lower assay cost as well as good portability and amenability to miniaturization. The role nanomaterials play in biosensors, their ability to improve detection capabilities in low concentration analytes yielding clinically useful data and their impact on other biosensor performance properties will be discussed. Finally, the most common types of electroanalytical detection methods will be briefly touched upon.

Amperometric sensing of anti-HIV drug zidovudine on Ag nanofilm-multiwalled carbon nanotubes modified glassy carbon electrode

The zidovudine (ZDV) is the first drug approved for the treatment of HIV virus infection. The detection and determination of this drug are very importance in human serum because of its undesirable effects. A new ZDV sensor was fabricated on the basis of nanocomposite of silver nanofilm (Ag-NF) and multiwalled carbon nanotubes (MWCNTs) immobilized on glassy carbon electrode (GCE). The modified electrodes were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), cyclic voltammetry (CV), and linear sweep voltammetry (LSV) techniques. Results showed that the electrodeposited silver has a nanofilm structure and further electrochemical studies showed that the prepared nanocomposite has high electrocatalytic activity and is appropriate for using in sensors. The amperometric technique under optimal conditions is used for the determination of ZDV ranging from 0.1 to 400ppm (0.37μM-1.5mM) with a low detection limit of 0.04ppm (0.15μM) (S/N=3) and good sensitivity. The prepared sensor possessed accurate and rapid response to ZDV and shows an average recovery of 98.6% in real samples.

Biologically inspired nanofibers for use in translational bioanalytical systems

Electrospun nanofiber mats are characterized by large surface-area-to-volume ratios, high porosities, and a diverse range of chemical functionalities. Although electrospun nanofibers have been used successfully to increase the immobilization efficiency of biorecognition elements and improve the sensitivity of biosensors, the full potential of nanofiber-based biosensing has not yet been realized. Therefore, this review presents novel electrospun nanofiber chemistries developed in fields such as tissue engineering and drug delivery that have direct application within the field of biosensing. Specifically, this review focuses on fibers that directly encapsulate biological additives that serve as immobilization matrices for biological species and that are used to create biomimetic scaffolds. Biosensors that incorporate these nanofibers are presented, along with potential future biosensing applications such as the development of cell culture and in vivo sensors.