Fully integrated monolithic optoelectronic transducer for real-time protein and DNA detection: the NEMOSLAB approach

An Ultrasensitive and Broad-Spectrum MoS2 Photodetector with Extrinsic Response Using Surrounding Homojunction

As unique building blocks for advancing optoelectronics, 2D semiconducting transition metal dichalcogenides have garnered significant attention. However, most previously reported MoS2 photodetectors respond only to visible light with limited absorption, resulting in a narrow spectral response and low sensitivity. Here, a surrounding homojunction MoS2 photodetector featuring localized p-type nitrogen plasma doping on the surface of n-type MoS2 while preserving a high-mobility underlying channel for rapid carrier transport is engineered. The establishment of p-n homojunction facilitates the efficient separation of photogenerated carriers, thereby boosting the device's intrinsic detection performance. The resulting photoresponsivity is 6.94 × 104 A W-1 and specific detectivity is 1.21 × 1014 Jones @ 638 nm, with an optimal light on/off ratio of ≈107 at VGS = -27 V. Notably, the introduction of additional bands within MoS2 bandgap through nitrogen doping leads to an extrinsic broadband response to short-wave infrared. The device exhibits a photoresponsivity of 34 A W-1 and a specific detectivity of up to 5.92 × 1010 Jones @ 1550 nm. Furthermore, the high-performance broadband response is further demonstrated through imaging and integration with waveguides, paving the way for next generation of multifunctional imaging systems and high-performance photonic chips.

Highly sensitive label-free in vitro detection of aflatoxin B1 in an aptamer assay using optical planar waveguide operating as a polarization interferometer

This work reports on further development of an optical biosensor for the in vitro detection of mycotoxins (in particular, aflatoxin B1) using a highly sensitive planar waveguide transducer in combination with a highly specific aptamer bioreceptor. This sensor is built on a SiO2-Si3N4-SiO2 optical planar waveguide (OPW) operating as a polarization interferometer (PI), which detects a phase shift between p- and s-components of polarized light propagating through the waveguide caused by the molecular adsorption. The refractive index sensitivity (RIS) of the recently upgraded PI experimental setup has been improved and reached values of around 9600 rad per refractive index unity (RIU), the highest RIS values reported, which enables the detection of low molecular weight analytes such as mycotoxins in very low concentrations. The biosensing tests yielded remarkable results for the detection of aflatoxin B1 in a wide range of concentrations from 1 pg/mL to 1 μg/mL in direct assay with specific DNA-based aptamers. Graphical abstract Optical planar waveguide polarization interferometry biosensor for detection of aflatoxin B1 using specific aptamer.

Mycotoxin Biosensor Based on Optical Planar Waveguide

The research aim of this work is to develop a simple and highly sensitive optical biosensor for detection of mycotoxins. This sensor is built on a planar waveguide operating on the polarization interferometry principle, i.e., detecting a phase shift between p- and s-components of polarized light developed during the binding of analyte molecules. The operation of the proposed sensor is similar to that of a Mach⁻Zehnder interferometer, while its design is much simpler and it does not require splitting the waveguide into two arms. The refractive index sensitivity of the polarization interferometer sensor was in the range of 5200 radians per refractive index unit (RIU). Several tests were conducted to detect ochratoxin A (OTA) at different concentrations in direct immunoassay with specific antibodies immobilized in the sensing window. The lowest concentration of OTA of 0.01 ng/mL caused a phase shift of nearly one period. The results obtained prove high sensitivity of the sensors, which are capable of detecting even lower concentrations of mycotoxins at the ppt (part-per-trillion) level.

Monolithically integrated broad-band Mach-Zehnder interferometers for highly sensitive label-free detection of biomolecules through dual polarization optics

Protein detection and characterization based on Broad-band Mach-Zehnder Interferometry is analytically outlined and demonstrated through a monolithic silicon microphotonic transducer. Arrays of silicon light emitting diodes and monomodal silicon nitride waveguides forming Mach-Zehnder interferometers were integrated on a silicon chip. Broad-band light enters the interferometers and exits sinusoidally modulated with two distinct spectral frequencies characteristic of the two polarizations. Deconvolution in the Fourier transform domain makes possible the separation of the two polarizations and the simultaneous monitoring of the TE and the TM signals. The dual polarization analysis over a broad spectral band makes possible the refractive index calculation of the binding adlayers as well as the distinction of effective medium changes into cover medium or adlayer ones. At the same time, multi-analyte detection at concentrations in the pM range is demonstrated.

An integrated microspectrometer for localised multiplexing measurements

We describe the development of an integrated lensed Arrayed Waveguide Grating (AWG) microspectrometer for localized multiplexing fluorescence measurements. The device, which has a footprint that is only 1 mm wide and 1 cm long, is capable of spectroscopic measurements on chip. Multiple fluorescence signals were measured simultaneously based upon simple intensity readouts from a CCD camera. We also demonstrate the integration of the AWG spectrometer with a microfluidic platform using a lensing function to confine the beam shape for focused illumination. This capability enhances signal collection, gives better spatial resolution, and provides a route for the analysis of small volume samples (e.g. cells) in flow. To show these capabilities we developed a novel "bead-AWG" platform with which we demonstrate localized multiplexed fluorescence detection either simultaneously or successively. Such an integrated system provides the basis for a portable system capable of optical detection of multi-wavelength fluorescence from a single defined location.

Copper-free click biofunctionalization of silicon nitride surfaces via strain-promoted alkyne-azide cycloaddition reactions

Cu-free "click" chemistry is explored on silicon nitride (Si(3)N(4)) surfaces as an effective way for oriented immobilization of biomolecules. An ω-unsaturated ester was grafted onto Si(3)N(4) using UV irradiation. Hydrolysis followed by carbodiimide-mediated activation yielded surface-bound active succinimidyl and pentafluorophenyl ester groups. These reactive surfaces were employed for the attachment of bicyclononyne with an amine spacer, which subsequently enabled room temperature strain-promoted azide-alkyne cycloaddition (SPAAC). This stepwise approach was characterized by means of static water contact angle, X-ray photoelectron spectroscopy, and fluorescence microscopy. The surface-bound SPAAC reaction was studied with both a fluorine-tagged azide and an azide-linked lactose, yielding hydrophobic and bioactive surfaces for which the presence of trace amounts of Cu ions would have been problematic. Additionally, patterning of the Si(3)N(4) surface using this metal-free click reaction with a fluorescent azide is shown. These results demonstrate the ability of the SPAAC as a generic tool for anchoring complex molecules onto a surface under extremely mild, namely ambient and metal-free, conditions in a clean and relatively fast manner.

Discerning Trends in Multiplex Immunoassay Technology with Potential for Resource-Limited Settings

BACKGROUND

In the search for more powerful tools for diagnoses of endemic diseases in resource-limited settings, we have been analyzing technologies with potential applicability. Increasingly, the process focuses on readily accessible bodily fluids combined with increasingly powerful multiplex capabilities to unambiguously diagnose a condition without resorting to reliance on a sophisticated reference laboratory. Although these technological advances may well have important implications for the sensitive and specific detection of disease, to date their clinical utility has not been demonstrated, especially in resource-limited settings. Furthermore, many emerging technological developments are in fields of physics or engineering, which are not readily available to or intelligible to clinicians or clinical laboratory scientists.

CONTENT

This review provides a look at technology trends that could have applicability to high-sensitivity multiplexed immunoassays in resource-limited settings. Various technologies are explained and assessed according to potential for reaching relevant limits of cost, sensitivity, and multiplex capability. Frequently, such work is reported in technical journals not normally read by clinical scientists, and the authors make enthusiastic claims for the potential of their technology while ignoring potential pitfalls. Thus it is important to draw attention to technical hurdles that authors may not be publicizing.

SUMMARY

Immunochromatographic assays, optical methods including those involving waveguides, electrochemical methods, magnetorestrictive methods, and field-effect transistor methods based on nanotubes, nanowires, and nanoribbons reveal possibilities as next-generation technologies.

Monolithically integrated Mach-Zehnder biosensors for real-time label-free monitoring of biomolecular reactions

Arrays of monolithically integrated Mach-Zehnder interferometers were fabricated by standard silicon technology and applied to the label-free real-time monitoring of biomolecular interactions. Chips accommodating 10 MZIs were functionalized with recognition biomolecules and encapsulated in wafer scale. Detection is based on Frequency-Resolved Mach-Zehnder Interferometry, a new concept that takes advantage of the broad-band input spectrum by monitoring the changes for every input frequency. The sensitivity of the device in terms of refractive index changes (Δn) was calculated using isopropanol/water solutions. A detection limit of Δn = 4 × 10(-6) was calculated. The bioanalytical capabilities of the device there demonstrated through model binding assays (biotin/streptavidin) as well as the detection of total prostate specific antigen in serum samples using devices coated with antigen-specific monoclonal antibody. Detection limits at the pM range were determined.

Rethinking approaches to improve the utilization of nucleic acid amplification tests for detection and characterization of influenza A in diagnostic and reference laboratories

Influenza A virus (IFVA) is a significant cause of respiratory infections worldwide and was also responsible for a recent pandemic in 2009. Laboratory identification of IFVA can guide antiviral therapy, assist in cohorting of patients and prevent antibiotic use. Characterization of the virus can track the emergence of novel strains, identify resistance and determine how circulating strains match with vaccine components. The gold standard for detection and characterization of IFVA is nucleic acid amplification technology (e.g., reverse transcriptase PCR [RT-PCR]), which must contend with a constantly evolving viral genome. Although molecular technology has been available for over two decades, there is still an operational gap between assay design and utilization of these tests for the diagnosis and characterization of IFVA. This review will discuss issues surrounding the implementation and use of RT-PCR for the identification and characterization of IFVA, and speculate on why RT-PCR has not been used more widely in clinical laboratories or moved closer to the patient. Newer, less widely used technologies that may change our laboratory practices will be identified and the authors will close with an attempt to identify some future applications of RT-PCR-based technologies for the detection and characterization of IFVA.