Direct surface plasmon resonance immunosensor for in situ detection of benzoylecgonine, the major cocaine metabolite

Pesticide biosensors: trends and progresses

Pesticides, chemical substances extensively employed in agriculture to optimize crop yields, pose potential risks to human and environmental health. Consequently, regulatory frameworks are in place to restrict pesticide residue concentrations in water intended for human consumption. These regulations are implemented to safeguard consumer safety and mitigate any adverse effects on the environment and public health. Although gas chromatography- and liquid chromatography-mass spectrometry (GC-MS and LC-MS) are highly efficient techniques for pesticide quantification, their use is not suitable for real-time monitoring due to the need for sophisticated laboratory pretreatment of samples prior to analysis. Since they would enable analyte detection with selectivity and sensitivity without sample pretreatment, biosensors appear as a promising alternative. These consist of a bioreceptor allowing for specific recognition of the target and of a detection platform, which translates the biological interaction into a measurable signal. As early detection systems remain urgently needed to promptly alert and act in case of pollution, we review here the biosensors described in the literature for pesticide detection to advance their development for use in the field.

Immunochemical method for penthiopyrad detection through thermodynamic and kinetic characterization of monoclonal antibodies

Immunoassays are nowadays being employed for rapid contaminant analysis in clinical, environmental, and agrochemical samples. A thorough characterization of the antibody‒antigen interaction can bring light to the immunoreagent selection process in order to develop sensitive and robust tests. Thus, determination of equilibrium and reaction rate constants is usually recommendable. However, this can be quite tricky for low molecular weight compounds, and competitive strategies are commonly followed to estimate apparent affinity values. In the present study, a collection of monoclonal antibodies to penthiopyrad was raised for the first time, and apparent equilibrium constants were assessed by the Langmuir model using three different competitive enzyme-linked immunosorbent assay formats. The obtained K_D values from antibody-coated assays were quite close to the corresponding K_D values calculated from surface plasmon resonance (SPR) evaluation. These studies were employed to select a pair of immunoreagents for immunoassay development. The K_D value for penthiopyrad of the selected antibody obtained by SPR was 0.28 nM. The optimized direct assay showed an IC₅₀ value for penthiopyrad of 0.42 nM (0.15 ng mL^-1) in buffer. The limit of quantification for grape, must, and wine samples was 10 ng mL^-1. An excellent correlation was found when immunochemical results were compared with those from LC-MS/MS. As an application case, it was determined that 58% of penthiopyrad was still found in wine after fermentation.

Tackling the Problem of Sensing Commonly Abused Drugs Through Nanomaterials and (Bio)Recognition Approaches

We summarize herein the literature in the last decade, involving the use of nanomaterials and various (bio)recognition elements, such as antibodies, aptamers and molecularly imprinted polymers, for the development of sensitive and selective (bio)sensors for illicit drugs with a focus on electrochemical transduction systems. The use and abuse of illicit drugs remains an increasing challenge for worldwide authorities and, therefore, it is important to have accurate methods to detect them in seized samples, biological fluids and wastewaters. They are recently classified as the latest group of “emerging pollutants,” as their consumption has increased tremendously in recent years. Nanomaterials, antibodies, aptamers and molecularly imprinted polymers have gained much attention over the last decade in the development of (bio)sensors for a myriad of applications. The applicability of these (nano)materials, functionalized or not, has significantly increased, and are therefore highly suitable for use in the detection of drugs. Lately, such functionalized nanoscale materials have assisted in the detection of illicit drugs fingerprints, providing large surface area, functional groups and unique properties that facilitate sensitive and selective sensing. The review discusses the types of commonly abused drugs and their toxicological implications, classification of functionalized nanomaterials (graphene, carbon nanotubes), their fabrication, and their application on real samples in different fields of forensic science. Biosensors for drugs of abuse from the last decade's literature are then exemplified. It also offers insights into the prospects and challenges of bringing the functionalized nanobased technology to the end user in the laboratories or in-field.

Disposable electrochemical immunosensor array for the multiplexed detection of the drug metabolites morphine, tetrahydrocannabinol and benzoylecgonine

Heroin, marijuana and cocaine are widely abused drugs. Their use can be readily detected by analyzing urine for the metabolites morphine (MOR), tetrahydrocannabinol (THC) or benzoylecgonine (BZC). A multiplex immunosensor is described here for detection of MOR, THC and BZC using screen printed carbon array electrodes modified with gold nanoparticles. Antibodies against MOR, THC and BZC were immobilized on eight electrodes in a sensor array simultaneously, and a competitive assay was used for the detection. The free analytes in the sample compete with bovine serum albumin-conjugated analytes for the immobilized antibodies on the sensor surface. The array is capable of detecting the three drugs simultaneously within 20-40 min. The method has a high sensitivity, with detection limits as low as 1.2, 7.0, and 8.0 pg.mL^-1 for MOR, THC and BZC, respectively. Cross reactivity testing was preformed to monitor any nonspecific binding. The results revealed good selectivity. Urine samples were spiked with the 3 drugs and tested with the multiplexed immunosensor. Recovery percentages ranged between 88 to 115%. Graphical abstract Schematic presentation of the multiplexed immunosensor for drugs of abuse,viz. tetrahydrocannabinol (THC), morphine (MOR), and benzoylecgonine (BZC)) by using an array of modified electrodes.

Optical Biosensors for Label-Free Detection of Small Molecules

Label-free optical biosensors are an intriguing option for the analyses of many analytes, as they offer several advantages such as high sensitivity, direct and real-time measurement in addition to multiplexing capabilities. However, development of label-free optical biosensors for small molecules can be challenging as most of them are not naturally chromogenic or fluorescent, and in some cases, the sensor response is related to the size of the analyte. To overcome some of the limitations associated with the analysis of biologically, pharmacologically, or environmentally relevant compounds of low molecular weight, recent advances in the field have improved the detection of these analytes using outstanding methodology, instrumentation, recognition elements, or immobilization strategies. In this review, we aim to introduce some of the latest developments in the field of label-free optical biosensors with the focus on applications with novel innovations to overcome the challenges related to small molecule detection. Optical label-free methods with different transduction schemes, including evanescent wave and optical fiber sensors, surface plasmon resonance, surface-enhanced Raman spectroscopy, and interferometry, using various biorecognition elements, such as antibodies, aptamers, enzymes, and bioinspired molecularly imprinted polymers, are reviewed.

Spectroscopic methods to analyze drug metabolites

Drug metabolites have been monitored with various types of newly developed techniques and/or combination of common analytical methods, which could provide a great deal of information on metabolite profiling. Because it is not easy to analyze whole drug metabolites qualitatively and quantitatively, a single solution of analytical techniques is combined in a multilateral manner to cover the widest range of drug metabolites. Mass-based spectroscopic analysis of drug metabolites has been expanded with the help of other parameter-based methods. The current development of metabolism studies through contemporary pharmaceutical research are reviewed with an overview on conventionally used spectroscopic methods. Several technical approaches for conducting drug metabolic profiling through spectroscopic methods are discussed in depth.

A non-competitive surface plasmon resonance immunosensor for rapid detection of triazophos residue in environmental and agricultural samples

The wide application of an organophosphate pesticide triazophos raises concern on the environmental pollution and the potential risk to human health. Thus, it is crucial to regularly monitor triazophos residue in the environment and agro-products. Herein we described a non-competitive immunoassay for trace detection of triazophos using a direct surface plasmon resonance (SPR) biosensor. Two anti-triazophos monoclonal antibodies (mAbs) were immobilized on the sensor chip and characterized by SPR-based kinetic analysis. The mAb with relatively slow dissociation rate was used for direct immunosensing of triazophos. The biosensor assay showed a high specificity and a low detection limit of 0.096ngmL^-1 to triazophos, with the linear detection range of 0.98-8.29ngmL^-1. Under the optimal condition, the sensor chip could be regenerated for 160cycles at least. Moreover, the sensitive method was applied to determine triazophos in the spiked environmental water and agricultural products, as well as in unknown real-life samples (including Chinese cabbage, cucumber, and apple). Desirable results demonstrated that the newly-developed immunosensor could be used as a rapid, convenient, and reliable tool to regularly monitor triazophos and meet the detection requirement of its maximum residue limits.

Expression and Functional Properties of an Anti-Triazophos High-Affinity Single-Chain Variable Fragment Antibody with Specific Lambda Light Chain

Triazophos is a widely used organophosphorous insecticide that has potentially adverse effects to organisms. In the present study, a high-affinity single-chain variable fragment (scFv) antibody with specific lambda light chain was developed for residue monitoring. First, the specific variable regions were correctly amplified from a hybridoma cell line 8C10 that secreted monoclonal antibody (mAb) against triazophos. The regions were then assembled as scFv via splicing by overlap extension polymerase chain reaction. Subsequently, the recombinant anti-triazophos scFv-8C10 was successfully expressed in Escherichia coli strain HB2151 in soluble form, purified through immobilized metal ion affinity chromatography, and verified via Western blot and peptide mass fingerprinting analyses. Afterward, an indirect competitive enzyme-linked immunosorbent assay was established based on the purified anti-triazophos scFv-8C10 antibody. The assay exhibited properties similar to those based on the parent mAb, with a high sensitivity (IC50 of 1.73 ng/mL) to triazophos and no cross reaction for other organophosphorus pesticides; it was reliable in detecting triazophos residues in spiked water samples. Moreover, kinetic measurement using a surface plasmon resonance biosensor indicated that the purified scFv-8C10 antibody had a high affinity of 1.8 × 10(-10) M and exhibited good binding stability. Results indicated that the recombinant high-affinity scFv-8C10 antibody was an effective detection material that would be promising for monitoring triazophos residues in environment samples.

Nanomaterial-based cocaine aptasensors

Up to now, many different methods have been developed for detection of cocaine, but most of these methods are usually time-consuming, tedious and require special or expensive equipment. Therefore, the development of simple, sensitive and rapid detection methods is necessary. In the last decade, aptamers have been used as a new biosensor platform for detection of cocaine in different samples. Aptamers are artificial single-stranded DNA or RNA oligonucleotides capable of binding to specific molecular targets with high affinity and if integrated to nanomaterials, it may lead in precise methods for cocaine detection in the common laboratories. In this review, recent advances and applications of aptamer-based biosensors and nanobiosensors, have been updated, paying attention to the use of fluorescence, colorimetric and electrochemical techniques for the detection and quantitative determination of cocaine.

An aptamer based surface plasmon resonance biosensor for the detection of ochratoxin A in wine and peanut oil

Ochratoxin A (OTA), as a kind of chlorophenolic mycotoxin, exist widely in plant origin food and is harmful to human. Herein, a surface plasmon resonance (SPR) biosensor using an anti-OTA aptamer immobilized sensor chip was developed to measure ochratoxin A (OTA) quantificationally through a straightforward direct binding assay. The streptavidin protein as a crosslinker was immobilized onto the surface of a sensor chip and the biotin-aptamer was captured through streptavidin-biotin interaction. The biosensor exhibited a detection range from 0.094 to 100ng/mL (linear range from 0.094 to 10ng/mL) of OTA with a lower detection limit of 0.005ng/mL. Detection of OTA in wine and peanut oil was further performed in the SPR biosensor using simple liquid-liquid extraction for sample pretreatments. Recoveries of ochratoxin A from spiked samples ranged from 86.9% to 116.5% and coefficients of variation (CVs) ranged from 0.2% to 6.9%. The developed methods in our studies showed good analytical performances with limits of detection much lower than the maximum residue limit, as well as a good reproducibility and stability.

A highly selective and sensitive cocaine aptasensor based on covalent attachment of the aptamer-functionalized AuNPs onto nanocomposite as the support platform

Based on the conformational changes of the aptamer-functionalized gold nanoparticles (AuNPs) onto MWCNTs/IL/Chit nanocomposite as the support platform, we have developed a sensitive and selective electrochemical aptasensor for the detection of cocaine. The 5'-amine-3'-AuNP terminated aptamer is covalently attached to a MWCNTs/IL/Chit nanocomposite. The interaction of cocaine with the aptamer functionalized AuNP caused the aptamer to be folded and the AuNPs with negative charge at the end of the aptamer came to the near of electrode surface therefore, the electron transfer between ferricyanide (K3Fe(CN)6) as redox probe and electrode surface was inhibited. A decreased current of (K3Fe(CN)6) was monitored by differential pulse voltammetry technique. In an optimized condition the calibration curve for cocaine concentration was linear up to 11 μM with detection limit (signal-to-noise ratio of 3) of 100 pM. To test the selectivity of the prepared aptasensor sensing platform applicability, some analgesic drugs as the interferes were examined. The potential of the aptasensor was successfully applied for measuring cocaine concentration in human blood serum. Based on our experiments it can be said that the present method is absolutely beneficial in developing other electrochemical aptasensor.

Direct detection of protein biomarkers in human fluids using site-specific antibody immobilization strategies

Design of an optimal surface biofunctionalization still remains an important challenge for the application of biosensors in clinical practice and therapeutic follow-up. Optical biosensors offer real-time monitoring and highly sensitive label-free analysis, along with great potential to be transferred to portable devices. When applied in direct immunoassays, their analytical features depend strongly on the antibody immobilization strategy. A strategy for correct immobilization of antibodies based on the use of ProLinker™ has been evaluated and optimized in terms of sensitivity, selectivity, stability and reproducibility. Special effort has been focused on avoiding antibody manipulation, preventing nonspecific adsorption and obtaining a robust biosurface with regeneration capabilities. ProLinker™-based approach has demonstrated to fulfill those crucial requirements and, in combination with PEG-derivative compounds, has shown encouraging results for direct detection in biological fluids, such as pure urine or diluted serum. Furthermore, we have implemented the ProLinker™ strategy to a novel nanoplasmonic-based biosensor resulting in promising advantages for its application in clinical and biomedical diagnosis.

Surface plasmon resonance detection of silver ions and cysteine using DNA intercalator-based amplification

We report the development of a surface plasmon resonance sensor based on the silver ion (Ag(+))-induced conformational change of a cytosine-rich, single-stranded DNA for the detection of Ag(+) and cysteine (Cys) in aqueous solutions. In the free state, single-stranded oligonucleotides fold into double-helical structures through the addition of Ag(+) to cytosine–cytosine (C–C) mismatches. However, in the presence of Cys, which competitively binds to Ag(+), the formation of the C–Ag(+)–C assembly is inhibited, resulting in free-state, single-stranded oligonucleotides. To enhance sensitivity, the DNA intercalator, daunorubicin, was employed to achieve signal enhancement. The detection limit for Ag(+) was 10 nM with a measurement range of 50–2,000 nM, and the detection limit for Cys was 50 nM with a measurement range of 50–2,000 nM. This simple assay was also used to individually determine the spiked Ag(+) concentration in water samples and Cys concentrations in biological fluid samples.

SPR sensing of bisphenol A using molecularly imprinted nanoparticles immobilized on slab optical waveguide with consecutive parallel Au and Ag deposition bands coexistent with bisphenol A-immobilized Au nanoparticles

A slab-type optical waveguide (s_OWG)-based microfluidic SPR measurement system for bisphenol A was developed. This s_OWG possesses consecutive parallel gold and silver deposition bands in the line of plasmon flow, allowing two individual SPR signals to be independently obtained as a result of the difference in resonant reflection spectra of these metals. As a molecular recognition element, molecularly imprinted polymer nanoparticles (MIP-Np) were employed and immobilized on the surface of each of the gold and silver deposition bands. The resonant reflection spectra were measured on the MIP-Np-immobilized consecutive parallel gold and silver deposition bands coexistent with BPA-AuNp. The Ag-based SPR spectra showed a red shift (0.7 nm) when free BPA (0.1 mM) was passed over the BPA-AuNp/immobilized MIP-Np complexes formed on the s_OWG, unlike the case for the Au deposition band, while a large excess of BPA induced a blue shift due to the competitive desorption of BPA-AuNp from the immobilized MIP-Np on the s_OWG. By using the proposed detection system, binding events of other small molecules could be monitored in conjunction with the use of MIP-Np and labeled-AuNp.

Aptamer sensor for cocaine using minor groove binder based energy transfer

We report on an optical aptamer sensor for cocaine detection. The cocaine sensitive fluorescein isothiocyanate (FITC)-labeled aptamer underwent a conformational change from a partial single-stranded DNA with a short hairpin to a double-stranded T-junction in the presence of the target. The DNA minor groove binder Hoechst 33342 selectively bound to the double-stranded T-junction, bringing the dye within the Förster radius of FITC, and therefore initiating minor groove binder based energy transfer (MBET), and reporting on the presence of cocaine. The sensor showed a detection limit of 0.2 μM. The sensor was also implemented on a carboxy-functionalized polydimethylsiloxane (PDMS) surface by covalently immobilizing DNA aptamers. The ability of surface-bound cocaine detection is crucial for the development of microfluidic sensors.