Au nanospheres and nanorods for enzyme-free electrochemical biosensor applications

Surface charge modulation enhanced high stability of gold oxidation intermediates for electrochemical glucose sensors

Rapid and accurate blood glucose detection is significant for diagnosing and treating diabetes. Herein, ultra-low-content gold nanoparticles were loaded on different metal foams and applied to electrochemical enzyme-free glucose sensors via simple displacement reactions. The structures and properties of the produced catalysts were determined by various characterization methods. The performance of the glucose sensor was examined in relation to the interactions between three different metal substrates and gold. The one with the best performance is the sample of gold nanoparticles grown on copper foam (Au300 Cu Foam). It has the advantage of a porous three-dimensional network, a large electroactive surface area, and the high catalytic activity of gold. The combination of Cu and Au increased the valence state of Au, thus favoring the catalytic activity for glucose oxidation. Cyclic voltammetry and chronoamperometry measurements revealed that Au is responsible for the electrocatalytic oxidation of glucose. The sensitivity of Au300 Cu Foam was found to be 10 839 μA mM^-1 cm^-2 in the linear range of 0.00596-0.0566 mM, with a detection limit (LOD) of 0.223 μM, and 2-3 s response time at 0.4 V vs. Ag/AgCl. The Au300 Cu Foam glucose sensor also offered outstanding stability and anti-interference performance. The prepared Au300 Cu Foam electrode was also successfully applied to detect different levels of glucose in human body fluids, such as saliva. These characteristics make Au300 Cu Foam promising for non-invasive glucose detection.

AgPt/MoS2 hybrid as electrochemical sensor for detecting H2O2 release from living cells

A novel non-enzymatic H2O2 biosensor based on a AgPt/MoS2 nanohybrid exhibits high sensitivity and selectivity.

Optimization of gold-palladium core-shell nanowires towards H2O2 reduction by adjusting shell thickness

Designable bimetallic core-shell nanoparticles exhibit superb performance in many fields including industrial catalysis, energy conversion and chemical sensing, due to their outstanding properties associated with their tunable electronic structure. Herein, Au-Pd core-shell (Au_richPd@AuPd_rich) nanowires (NWs) were synthesized through a one-pot facile chemical reduction method in the presence of cetyltrimethyl ammonium bromide (CTAB) surfactant. The thickness of the Pd shell could be adjusted by directly controlling the Au/Pd feeding ratio while maintaining the nanowire morphology. The as-obtained Au₇₅Pd₂₅ core-shell NWs with a thin Pd_rich shell showed significantly enhanced activities towards the reduction of hydrogen peroxide with the sensitivity reaching 338 μA cm^-2 mM^-1 and a linear range up to 10 mM. In sum, Pd shell thickness could be used to adjust the electronic structure, thereby optimizing the catalytic activity.

A novel electrochemical sensing platform for detection of dopamine based on gold nanobipyramid/multi-walled carbon nanotube hybrids

Dopamine homeostasis is an important clinical diagnostic index, because an abnormal level in the human body is closely related to certain serious diseases. Herein, a novel electrochemical sensing platform based on gold nanobipyramid/multi-walled carbon nanotube hybrids (AuNBP/MWCNTs) is developed to detect dopamine in human fluids. Using field emission scanning electron microscopy, it is observed that AuNBPs of about 60 nm with two pyramids are well dispersed on the surface of MWCNTs. Energy-dispersive X-ray spectrometry, X-ray diffraction and X-ray photoelectron spectroscopy confirm that AuNBPs are self-assembled onto the surface of MWCNTs to form the hybrids. Cyclic voltammetry reveals that the AuNBP/MWCNTs exhibit good electrocatalytic activity toward dopamine oxidation owing to the synergistic effects of AuNBPs and MWCNTs. In addition, both cyclic voltammetry and differential pulse voltammetry display three well-resolved and distinct oxidation peaks on the AuNBP/MWCNT-modified glassy carbon electrode. Based on AuNBP/MWCNTs, the newly developed electrochemical sensor is used to detect dopamine in the presence of ascorbic acid and uric acid over a wide linear range from 50 nM to 2.7 mM and a low detection limit of 15 nM (at S/N = 3). The electrochemical sensor can also be applied for the quantitative analysis of dopamine in real samples. Graphical abstract A novel electrochemical sensing platform based on gold nanobipyramid/multi-walled carbon nanotube hybrids (AuNBP/MWCNTs) was proposed to detect dopamine in the presence of ascorbic acid and uric acid.

Dual-type responsive electrochemical biosensor for the detection of α2,6-sialylated glycans based on AuNRs-SA coupled with c-SWCNHs/S-PtNC nanocomposites signal amplification

In this study, a dual-type responsive electrochemical biosensor was developed for the quantitative detection of α2,6-sialylated glycans (α2,6-sial-Gs), a potential biomarker of tumors. The gold nanorods (AuNRs), which exhibited great specific surface area, as well as good biocompatibility, was synthesized by the way of seed growth method. Furthermore, a biotin-streptavidin (biotin-SA) system was introduced to improve the immunoreaction efficiency. Accordingly, a label-free biosensor was fabricated based on AuNRs-SA for the quick detection of α2,6-sial-Gs by recording the signal of differential pulse voltammetry (DPV). Furthermore, to expand the ultrasensitive detection of α2,6-sial-Gs, a carboxylated single-walled carbon nanohorns/sulfur-doped platinum nanocluster (c-SWCNHs/S-PtNC) was synthesized for the first time as a novel signal label, which showed an excellent catalytic performance. The usage of c-SWCNHs/S-PtNC could significantly amplify the electrochemical signal recorded by the amperometric i-t curve. Herein, a sandwich type biosensor was constructed by combining the AuNRs-SA on the electrode and c-SWCNHs/S-PtNC (signal amplifier). The label-free biosensor possessed a linear range from 5 ng mL^-1 to 5 μg mL^-1 with a detection limit of 0.50 ng mL^-1, and the sandwich-type biosensor possessed a wide linear range from 1 fg mL^-1 to 100 ng mL^-1 with a detection limit of 0.69 fg mL^-1. Furthermore, the biosensor exhibited excellent recovery and stability, indicating its potential for use in actual samples.

Stereoselective Double Reduction of 3-Methyl-2-cyclohexenone, by Use of Palladium and Platinum Nanoparticles, in Tandem with Alcohol Dehydrogenase

The combination of metal nanoparticles (Pd or Pt NPs) with NAD-dependent thermostable alcohol dehydrogenase (TADH) resulted in the one-flask catalytic double reduction of 3-methyl-2-cyclohexenone to 3-(1S,3S)-methylcyclohexanol. In this article, some assumptions about the interactions between a chemocatalyst and a biocatalyst have been proposed. It was demonstrated that the size of the NPs was the critical parameter for the mutual inhibition: the bigger the NPs, the more harmful for the enzyme they were, even if the NPs themselves were only moderately inactivated. Conversely, the smaller the NPs, the more minimal the TADH denaturation, although they were dramatically inhibited. Resuming, the chemocatalysts were very sensitive to deactivation, which was not related to the amount of enzyme used, while the inhibition of the biocatalyst can be strongly reduced by minimizing the NPs/TADH ratio used to catalyze the reaction. Among some methods to avoid direct binding of NPs with TADH, we found that using large Pd NPs and protecting their surfaces with a silica shell, the overall yield of 3-(1S,3S)-methylcyclohexanol was maximized (36%).

Non-enzymatic sensors based on in situ laser-induced synthesis of copper-gold and gold nano-sized microstructures

The synthesis of conductive gold and copper-gold microstructures with high developed surface based on the method of laser-induced metal deposition from solution was developed. The topology and crystallization phase of these structures were observed by means of scanning electron microscopy and X-ray diffraction, respectively. The electrochemical properties of the synthesized materials were investigated using cyclic voltamperometry and amperometry. According to the obtained results, it was found out that copper-gold microstructures demonstrate a linear dependence of Faraday current vs. concentration from 0.025 to 5µM for D-glucose and from 0.025 to 10µM for hydrogen peroxide. In turn, gold deposit exhibits a linear dependence of Faraday current vs. concentration from 0.025 to 50µM for D-glucose and from 0.025 to 1µM for hydrogen peroxide. Moreover, the synthesized materials reveal low detection limits (0.025µM) with respect to the aforementioned analytes, which is quite promising for their potential application in design and fabrication of new non-enzymatic biosensors.

Gold nanorods vs. gold nanoparticles: application in electrochemical sensing of cytosine β-d-arabinoside using metal ion mediated molecularly imprinted polymer

The determination of an anticancer drug (cytosine arabinoside, Ara-C) in body fluids is very important due to its pharmaceutical and clinical significance.

Impedimetric detection of pathogenic bacteria with bacteriophages using gold nanorod deposited graphite electrodes

Electrochemical impedance spectroscopy (EIS) is applied for the detection of bacteria using bacteriophages as a bioprobe together with gold nanorods (GNRs).

Gold nanorods-paper electrode based enzyme-free electrochemical immunoassay for prostate specific antigen using porous zinc oxide spheres–silver nanoparticles nanocomposites as labels

Gold nanorods-modified paper electrode and porous zinc oxide spheres–silver nanoparticles nanocomposites were used to construct an enzyme-free immunosensor.