Efficient one-pot synthesis of molecularly imprinted silica nanospheres embedded carbon dots for fluorescent dopamine optosensing

Highly sensitive enantioselective spectrofluorimetric determination of R-/S-mandelic acid using l-tryptophan-modified amino-functional silica-coated N-doped carbon dots as novel high-throughput chiral nanoprobes

Amino-functional silica-coated N-doped carbon dots (NH2-SiO2-CDs) were covalently modified by l-tryptophan (chiral selector) by producing an amide bond between carboxyl groups of L-try and amino groups of NH2-SiO2-CDs to develop a novel high throughput chiral nanoprobes (L-try-CONH-SiO2-CDs) for highly sensitive and enantioselective quantification of S-/R-mandelic acid (S-/R-Man). The method showed a great difference between S- and R-isomers (enantioselectivity coefficient = 4.17) due to the ultra-stability of the Meisenheimer complex that was formed between S-isomer and nanoprobe (KS-Man/KR-man = 2122.7, where K is the binding-constant). At optimal experimental conditions, two linear ranges of 0.5-25.0 (LOD of 0.05 μM) and 0.5-22.0 μM (LOD of 0.27 μM) for S- and R-Man, respectively, along with an enhanced sensitivity toward S-isomer (about 5.7-fold higher than R-isomer) were attained. High selectivity for the determination of mandelic acid was achieved compared to metal ions, amino acids, and sugars that commonly coexist with it. Intra-day as well as inter-day assays, respectively, showed RSD values of about 3.2 and 3.9%. The mechanistic studies were performed for proving the enantioselective behavior of the developed nanoprobe. The method was then used for S-/R-mandelic acid determination in bio-samples. The figures of merit for the method were found to be better than those already reported for enantioselective detection of R-/S-Man.

Organosilicon-Based Carbon Dots and Their Versatile Applications

Carbon dots (CDs) are a newly discovered type of fluorescent material that has gained significant attention due to their exceptional optical properties, biocompatibility, and other remarkable characteristics. However, single CDs have some drawbacks such as self-quenching, low quantum yield (QY), and poor stability. To address these issues, researchers have turned to organosilicon, which is known for its green, economical, and abundant properties. Organosilicon is widely used in various fields including optics, electronics, and biology. By utilizing organosilicon as a synthetic precursor, the biocompatibility, QY, and resistance to self-quenching of CDs can be improved. Meanwhile, the combination of organosilicon with CDs enables the functionalization of CDs, which significantly expands their original application scenarios. This paper comprehensively analyzes organosilicon in two main categories: precursors for CD synthesis and matrix materials for compounding with CDs. The role of organosilicon in these categories is thoroughly reviewed. In addition, the paper presents various applications of organosilicon compounded CDs, including detection and sensing, anti-counterfeiting, optoelectronic applications, and biological applications. Finally, the paper briefly discusses current development challenges and future directions in the field.

Salicylic acid doped silica nanoparticles as a fluorescent nanosensor for the detection of Fe3+ in aqueous solution

A novel organic-inorganic hybrid nanosensor (SASP) was prepared by a one-step sol-gel method and characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, N2 adsorption-desorption, fluorescence spectroscopy, etc. The nanosensor showed almost 3-fold fluorescence emission quenching upon excitation with a 293 nm wavelength in the presence of 20 μM Fe3+ ions. The presence of 18 other metal ions had no observable effect on the sensitivity and selectivity of the nanosensor. A fluorescence analysis method based on the SASP for the selective detection of Fe3+ was established under optimal conditions. The results showed that there was a linear relationship between the log luminescence value and the concentration of Fe3+ over the range of 2.0 × 10-7-9.0 × 10-5 mol L-1 with a detection limit (3σ) of 2.5 × 10-8 mol L-1. Furthermore, the proposed method was successfully applied for the determination of trace Fe3+ in fetal bovine serum without the interference of other molecules and ions. Good recovery (96.5-104.5%) and a relative standard deviation of less than 8.6% were obtained from serum samples spiked with four levels of Fe3+. Additionally, the nanosensor showed a good reversibility; the fluorescence could be switched "off" and "on" in two ways, by adjusting the pH of the solution and adding metal chelating agent EDTA.

A Review of Sensing Applications of Molecularly Imprinted Fluorescent Carbon Dots for Food and Biological Sample Analysis

Molecularly imprinted fluorescent carbon dots (MI-FCDs) find numerous applications in analytical chemistry due to their outstanding photoluminescent properties and having specific pockets for the recognition of target molecules. Despite significant advances, practical applications of MI-FCDs-based fluorescent sensors are still in their initial stages. Therefore, the topical developments in the synthesis, working, and application of MI-FCDs for sensing various target species (e.g., pharmaceuticals, biomolecules, pesticides, food additives, and miscellaneous species) in food and biological media have been highlighted. Moreover, a careful evaluation has been made to select the best methods based on their performance in terms of analytical parameters. To expand the horizons of this field, important challenges and future directions for developing MI-FCDs for practical use are also presented. This review will highlight important aspects of MI-FCDs-based fluorescent sensors for their applicability in food science, material science, environmental science, nanoscience, and biotechnology.

3D printed neural tissues with in situ optical dopamine sensors

Engineered neural tissues serve as models for studying neurological conditions and drug screening. Besides observing the cellular physiological properties, in situ monitoring of neurochemical concentrations with cellular spatial resolution in such neural tissues can provide additional valuable insights in models of disease and drug efficacy. In this work, we demonstrate the first three-dimensional (3D) tissue cultures with embedded optical dopamine (DA) sensors. We developed an alginate/Pluronic F127 based bio-ink for human dopaminergic brain tissue printing with tetrapodal-shaped-ZnO microparticles (t-ZnO) additive as the DA sensor. DA quenches the autofluorescence of t-ZnO in physiological environments, and the reduction of the fluorescence intensity serves as an indicator of the DA concentration. The neurons that were 3D printed with the t-ZnO showed good viability, and extensive 3D neural networks were formed within one week after printing. The t-ZnO could sense DA in the 3D printed neural network with a detection limit of 0.137 μM. The results are a first step toward integrating tissue engineering with intensiometric biosensing for advanced artificial tissue/organ monitoring.

Red emissive N-doped carbon dots encapsulated within molecularly imprinted polymers for optosensing of pyrraline in fatty foods

A novel and facile method was proposed for preparation of red emissive N-doped carbon dots encapsulated within molecularly imprinted polymers (RNCDs@MIPs) using a one-pot room-temperature reverse microemulsion polymerization. RNCDs used citric acid and urea as carbon and nitrogen sources by one-step solvothermal synthesis with the optimum emission of 620 nm. Unique optical properties of RNCDs coupled with high selective MIPs make the RNCDs@MIPs conjugate capable to adsorb specific targets of pyrraline (PRL), such a binding event was then transduced to quench fluorescence response signal of the RNCDs. RNCDs@MIPs for PRL showed linearity from 0.1 to 40 μg/L, with a detection limit of 65 ng/L. The RNCDs@MIPs exhibited a good reproducibility of 4.67% obtained from four times of rebinding for PRL. The optosensing probe was successfully applied to the detection of PRL in fatty foods with the spiked recovery of 85.93-106.96%.

New Trends in Fluorescent Nanomaterials-Based Bio/Chemical Sensors for Neurohormones Detection-A Review

The study of neurotransmitters and stress hormones allows the determination of indicators of the current stress load in the body. These species also create a proper strategy of stress protection. Nowadays, stress is a general factor that affects the population, and it may cause a wide range of serious disorders. Abnormalities in the level of neurohormones, caused by chronic psychological stress, can occur in, for instance, corporate employees, health care workers, shift workers, policemen, or firefighters. Here we present a new nanomaterials-based sensors technology development for the determination of neurohormones. We focus on fluorescent sensors/biosensors that utilize nanomaterials, such as quantum dots or carbon nanomaterials. Nanomaterials, owing to their diversity in size and shape, have been attracting increasing attention in sensing or bioimaging. They possess unique properties, such as fluorescent, electronic, or photoluminescent features. In this Review, we summarize new trends in adopting nanomaterials for applications in fluorescent sensors for neurohormone monitoring.

Mn3+/Mn4+ ion-doped carbon dots as fenton-like catalysts for fluorescence dual-signal detection of dopamine

Carbon dots (CDs), a new zero-dimensional material, have ignited a revolution in the fields of sensing, bioimaging, and biomedicine. However, the difficulty of preparing CDs with Fenton-like catalytic properties has seriously hindered their application in the diagnosis of oxidation/reduction biomolecules or metal ions. Here, an innovative method was successfully established to synthesize Mn3+/Mn4+ ion-doped blue-green fluorescent CDs with Fenton-like catalytic properties using manganese acetate as the manganese source. Specifically, the CDs prepared here were equipped with functional groups of -COOH, NH2, C=O, and Mn-O, offering the possibility to function as a fluorescence sensor. More importantly, the introduction of manganese acetate resulted in the preparation of CDs with Fenton-like catalytic properties, and the dual-signal fluorescence detection of dopamine (DA) was realized with linear ranges of 100–275 nM and 325–525 nM, and the detection limits were 3 and 12 nM, respectively. In addition, due to the Fenton-like catalytic activity of Mn3+/Mn4+ ion-doped CDs, the material has broad application prospects in the detection of oxidation/reduction biomolecules or metal ions related to disease diagnosis and prevention.

Probing and Manipulating Noncovalent Interactions in Functional Polymeric Systems

Noncovalent interactions, which usually feature tunable strength, reversibility, and environmental adaptability, have been recognized as driving forces in a variety of biological and chemical processes, contributing to the recognition between molecules, the formation of molecule clusters, and the establishment of complex structures of macromolecules. The marriage of noncovalent interactions and conventional covalent polymers offers the systems novel mechanical, physicochemical, and biological properties, which are highly dependent on the binding mechanisms of the noncovalent interactions that can be illuminated via quantification. This review systematically discusses the nanomechanical characterization of typical noncovalent interactions in polymeric systems, mainly through direct force measurements at microscopic, nanoscopic, and molecular levels, which provide quantitative information (e.g., ranges, strengths, and dynamics) on the binding behaviors. The fundamental understandings of intermolecular and interfacial interactions are then correlated to the macroscopic performances of a series of noncovalently bonded polymers, whose functions (e.g., stimuli-responsiveness, self-healing capacity, universal adhesiveness) can be customized through the manipulation of the noncovalent interactions, providing insights into the rational design of advanced materials with applications in biomedical, energy, environmental, and other engineering fields.

Direct and Sensitive Detection of Dopamine Using Carbon Quantum Dots Based Refractive Index Surface Plasmon Resonance Sensor

Abnormality of dopamine (DA), a vital neurotransmitter in the brain’s neuronal pathways, causes several neurological diseases. Rapid and sensitive sensors for DA detection are required for early diagnosis of such disorders. Herein, a carbon quantum dot (CQD)-based refractive index surface plasmon resonance (SPR) sensor was designed. The sensor performance was evaluated for various concentrations of DA. Increasing DA levels yielded blue-shifted SPR dips. The experimental findings revealed an excellent sensitivity response of 0.138°/pM in a linear range from 0.001 to 100 pM and a high binding affinity of 6.234 TM⁻¹. The effects of varied concentrations of DA on the optical characteristics of CQD thin film were further proved theoretically. Increased DA levels decreased the thickness and real part of the refractive index of CQD film, according to fitting results. Furthermore, the observed reduction in surface roughness using AFM demonstrated that DA was bound to the sensor layer. This, in turn, explained the blue shift in SPR reflectance curves. This optical sensor offers great potential as a trustworthy solution for direct measurement due to its simple construction, high sensitivity, and other sensing features.

Ultrasensitive and Highly Selective Detection of Bisphenol a Using Core-Shell Magnetic Molecularly Imprinted Quantum Dots Electrochemiluminescent Probe

The main aim of this work was to develop a magnetic molecularly imprinted polymer (MMIP)-based quantum dots electrochemiluminescent (ECL) probe for the ultrasensitive and highly selective detection of bisphenol A (BPA). The prepared core-shell Fe₃O₄@SiO₂ exhibited superparamagnetic properties, making them easy to separate. The MIP was fabricated by the self-polymerization of dopamine on the surface of amine-terminated Fe₃O₄@SiO₂ (Fe₃O₄@SiO₂-NH₂) magnetic nanoparticles and doped with quantum dots (QDs) to form an ECL system. The ECL intensity decrease with the concentration of BPA increased, due to the BPA molecules occupied molecularly imprinted sites and blocked the strong ECL emission of QDs. The prepared ECL sensor performed satisfactorily in the detection of BPA, with a wide linear range from 10^- 4 to 10^- 9 mol L^- 1 and a low detection limit of 3.4 × 10^- 10 mol L^- 1 (S/N = 3). The recoveries of BPA achieved were in the range 96%-107% in the detection of actual water samples. The proposed ECL sensor displayed high sensitivity and stability, and may provide an approach for determining other important analytes.

Development of Ag nanoparticle-carbon quantum dot nanocomplex as fluorescence sensor for determination of gemcitabine

Gemcitabine hydrochloride is an established chemotherapeutic agent in several solid tumors. In spite of outstanding therapeutic efficacy, there are some serious fetal side effects with gemcitabine in higher concentrations which necessitate developing a sensitive sensor for its quantification. Herein, a fluorescent metal-nanoparticles conjugated carbon quantum dot (MN-CQD) was prepared by a mixture of citric acid/ammonia sulfate and different metals using hydrothermal method. Based on the primary experiments, the efficiency of Ag nanoparticle-CQDs for gemcitabine determination was found to be much better than others. The AgNp-CQDs fluorescence was quenched by gemcitabine anticancer drug via photo-induced charge transfer which renders the system into fluorescence "OFF" status. Under the experimental conditions, the linear range of detection was 0.003-0.1 μM in an aqueous solution with a correlation coefficient of 0.96 and a limit of detection equal to 0.002 µM. The relative standard deviation (RSD) for gemcitabine determination was 3.4% (n = 3). Finally, after optimizing the conditions, the concentration of analyte was determined in real samples including human plasma and urine. These results confirm that the as prepared fluorescence based nanosensor can be used for sensitive quantification of gemcitabine in real samples.

Silane-Functionalized Carbon Dots and Their Polymerized Hybrids: From Optoelectronics to Biotherapy

Nanomaterials usually manifest unique properties in solutions but will be undermined in the solid state. It is necessary to incorporate them into substrates or hybrid them with other functional materials for multiple devices and applications. Though there are a variety of methods to inherit their intrinsic properties like fluorescent and mechanical performance, most nanohybrid materials would lose their transparency irreversibly when construct solid-state devices. As a hot topic of nanomaterials in recent years, scientific works found a type of carbon dots using silane coupling agents as precursors that can overcome the shortcoming. These carbon dots, called silane-functionalized carbon dots (SiCDs), are catching increasing interest due to their versatility. Silane coupling agents endow SiCDs with the ability to disperse in solvents or polymerize with matrices by blending or covalent bonds without loss of transparency and decline of performance. The distinguishing features make SiCDs an ideal high transmittance, high doping concentration nanomaterial. The synergistic effect of SiCDs and hybridized sol-gel solid structures can not only hold the optical features of CDs but also enhance their original physical and chemical performance. This highlight focuses on the connection between SiCDs and organosilanes. Plus, preparation methods, applications, and prospective of SiCDs are mentioned.

A smartphone-integrated optosensing platform based on red-emission carbon dots for real-time detection of pyrethroids

This report described the development of an optosensing platform based on red-emission carbon dots (RCDs) integrated with a smartphone application that, together, can detect pyrethroids in real time. Based on the high stability and selectivity of molecular imprinting technology, RCDs-based optosensing imprinted polymers was obtained by using a one-pot inverse microemulsion surface imprinting method. Lambda-cyhalothrin (LC), which is a pyrethroid pesticide, can interact with the widely distributed -NH₂ groups on the surface of the RCD-based optosensing nanomaterials to achieve fixed-point adsorption. The quantitative detection of pyrethroids in a wide concentration range (1-120 μg/L) could be achieved, and the limit of detection (LOD) was 0.89 μg/L. Furthermore, a portable UV light box combined with a smartphone was used to convert the change in fluorescence of the RCDs-based optosensing nanomaterials into specific values upon adding pyrethroids, and the LOD by using smartphone was 6.66 μg/L. The developed platform has numerous advantages, including low cost, simple operation, high sensitivity, and good specificity, among others, and it achieves on-site visualization and rapid detection.

Turn-on fluorescent probe for dopamine detection in solutions and live cells based on in situ formation of aminosilane-functionalized carbon dots

Dopamine (DA) is a critical biomarker for a variety of neurological diseases. Methods for simple and rapid DA detection are crucial for clinical diagnosis and treatments for those diseases. In this work, we developed a novel pretreatment-free method for dopamine detection using carbon dots as a turn-on fluorescent probe synthesized in situ. The aminosilane-functionalized carbon dots (SiCDs) were produced in a mild condensation reaction between N-[3-(Trimethoxysilyl)propyl]ethylenediamine (AEATMS) and dopamine, which were directly used for probing of dopamine. The prepared SiCDs exhibited green fluorescence with excitation/emission maximum at 380/495 nm, the intensity of which can be measured to quantify the DA present in the reaction mixture. The linear range of the assay was between 0.1 and 100 μM with a limit of detection (LOD) of 56.2 nM. The probe is of good selectivity and the recoveries of the developed method were in the range of 101.77-119.91% with RSDs within 3.67% in human serum sample tests. The SiCDs were also synthesized within MN9D cells under 37 °C and generated bright fluorescence, which can probe the DA's distribution in the cells. The described method exhibit potential in DA detection and live-cell imaging for its feature of facility, inexpensiveness, and sensitivity.

A simple approach to prepare fluorescent molecularly imprinted nanoparticles

Fluorescent molecularly imprinted polymers (FMIPs) are gaining increasing attention in analytical and medical sciences, particularly silica-based FMIPs due to their low cost, environmentally friendly nature and good biocompatibility. However, at present, silica-based FMIPs are usually prepared through several steps and displayed low selectivity. Here, a simple approach was utilized for preparing silica-based FMIP nanoparticles. The polymerization was initiated by 3-aminopropyltriethoxysilane (APTES), which also acted as the functional monomer in the imprinting system; in addition, to achieve one-pot synthesis, a fluorescent monomer was prepared by a simple reaction between fluorescein isothiocyanate (FITC) and APTES. The as-synthesized FMIP nanoparticles displayed high specificity and fast response time (<1 min) towards the target molecule. Environmental pH and buffer salt could affect the specific recognition behaviors of the FMIP nanoparticles. Such a simple catalyst-free synthetic technique could also be employed for the preparation of FMIP nanoparticles targeting other acidic molecules.

Recent advances in the construction and analytical applications of carbon dots-based optical nanoassembly

Recently, more and more attention has been focused on the construction and analytical applications of optical nanoassembly through combining carbon dots (CDs) with various other functional nanomaterials. The rational design and manufacture of CDs-based optical nanoassembly will be critical to meeting the needs of analytical science. The last decade has witnessed the immense potential of CDs-based optical nanoassembly in multiple sensing applications owing to their controlled optical properties, adjustable surface chemistry and microscopic morphology. This feature article collects the recent advances in the research and development of CDs-based optical nanoassembly and their applications in analytical sensors, aiming to provide vital insights and suggestions to inspire their broad sensing applications.

Fluorescent Carbon Dots Prepared from Hazelnut Kohl as an Affordable Probe for Determination of Dopamine

In this investigation, a simple, green and facile fluorescence mrtod using carbon dots (CDs) of hazelnut kohl is described for selective detection of dopamine (DA). The sensing system is based on hazelnut kohl (the black soot of kohl) which is used as a carbon source. Generally, kohl is a traditional eye cosmetic that used in different parts of the world and synthesized by the combustion process like burning natural materials. Here, it has been proven that black soot (kohl) obtained from hazelnut has a carbon dot structure and can be used for sensory applications. Some characterization methods are carried out to reveal the kohl structure. Also, the photoluminescence properties of the prepared CDs of kohl are investigated. It is found that the size of CDs is 2-4 nm. Besides, under the optimal conditions, the fluorescence of CDs is used for DA determination. CDs fluorescence intensity is decreased linearly with the increase of DA concentration. By using the fluorescence dependency toward the DA concentration, DA can be determined in the range 0.5-30 μM with the limit of detection of 0.30 μM. Finally, this method is successfully applied to discriminate the DA in the real samples (healthy human serum and cerebrospinal fluid (CSF)) which shows acceptable efficiently for diagnostic purposes. The fluorescence of carbon dots, prepared from Hazelnut Kohl, is quenched in the presence of dopamine.

Development of an eco-friendly fluorescence nanosensor based on molecularly imprinted polymer on silica-carbon quantum dot for the rapid indoxacarb detection

Rapid and efficient detection of indoxacarb (IXC), a common chemical contaminant, in environmental and biological samples is necessary. In this work, a modern optical sensor was developed for IXC, based on environmentally friendly molecularly imprinted polymer (MIP) coated on silica-carbon quantum dots (SiCQDs). A hydrothermal method was used to prepare highly fluorescence SiCQDs and, subsequently, MIP formed on surface (MIP@SiCQDs) using a sol-gel method. A linear relationship between the fluorescence quenching effect and increased IXC concentration was found for the range of 4-102 nM, under the optimal conditions, with a 1 nM detection limit. Precisions was of 4.5 and 2.3% for five replicate detections at 21 and 60 nM IXC, respectively. Applicability of the sensor for IXC quantification in environmental and biological samples was verified with recoveries in the range 95-106% with a relative standard deviation of <6.0%.

Silanized carbon dot-based thermo-sensitive molecularly imprinted fluorescent sensor for bovine hemoglobin detection

Using the surface molecular imprinting technique, a thermo-sensitive molecularly imprinted fluorescent sensor was constructed for bovine hemoglobin (BHb) detection with the silanized carbon dots (CD@SiO₂) as fluorescent signal, N-isopropylacrylamide as monomer sensitive to temperature, and BHb as template. The silanized carbon dots coated by the molecularly imprinted polymer (CD@SiO₂@MIP) were characterized by high-resolution transmission electron microscopy, Fourier transform infrared spectroscopy, and fluorescence spectroscopy. Owing to the combination of the strong fluorescence sensitivity of CDs and the high selectivity of the molecular imprinting shell, the prepared sensor showed good recognition and detection performance to the target protein BHb, with a linear range of 0.31-1.55 μM and a detection limit of 1.55 μM. Furthermore, the sensor was utilized to detect the content of BHb in real urine with a recovery of 98.6-100.5%. The CD@SiO₂@MIP sensors present a high potential for applications in the detection of BHb in biological systems. Graphical abstract.

Fluorescent nanomaterials combined with molecular imprinting polymer: synthesis, analytical applications, and challenges

Fluorescent nanomaterials (FNMs) and molecular imprinted polymers (MIPs) have been widely used in analytical chemistry for determination. However, low selectivity of FNMs and low sensitivity of MIPs hinder their applications. Combining the merits of FNMs and MIPs, FNMs coated with MIPs (FNMs@MIPs) were proposed to solve those problems. Carbon dots, semiconductor quantum dots, noble metal nanoparticles, silica nanoparticles, and covalent-organic frameworks have been reported to be coated with MIPs. In order to overcome challenges for FNMs@MIPs, such as the lack of handy synthesis routes, incompatibility with aqueous solutions, heterogeneous size of particles, leakage of template molecules, the biocompatibility of FNMs@MIPs, and the inference between FNMs and MIPs, scientists proposed some solutions in recent years. We comprehensively review the newest advances of the FNMs@MIPs, and predict the direction of the future development. Graphical abstract.

Effective removal matrix interferences by a modified QuEChERS based on the molecularly imprinted polymers for determination of 84 polychlorinated biphenyls and organochlorine pesticides in shellfish samples

A modified quick, easy, cheap, effective, rugged, and safe (QuEChERS) procedure combined with GC-MS/MS detection approach using a dynamic multiple reaction monitoring (DMRM) mode was successfully applied for the simultaneous analysis of 84 polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) in shellfish samples. The novel molecular imprinted polymers (MIPs) were synthesized by precipitation polymerization and characterized by Scanning electron microscopy, Brunauer-Emmett-Teller, Fourier transform infrared spectra and adsorption experiment. The MIPs exhibited good adsorption capability to pigment coextractives in shellfish samples without the loss of analytes compared with other sorbents. Under optimal conditions, spiked experiments in sinonovacula, mussel, and clam at 10.0-100.0 μg/kg concentrations showed excellent recoveries ranging from 70% to 120% for all analytes with the relative standard deviations of <10%. The developed method showed good linearity with the correlation coefficient above 0.9980, and the limits of quantification were in the range of 0.01-9.02 μg/kg. The developed QuEChERS procedure combined with GC-MS/MS was successfully applied to 84 PCBs and OCPs residues detection in shellfish samples.

Recent Advances in Electrochemical and Optical Sensing of Dopamine

Nowadays, several neurological disorders and neurocrine tumours are associated with dopamine (DA) concentrations in various biological fluids. Highly accurate and ultrasensitive detection of DA levels in different biological samples in real-time can change and improve the quality of a patient's life in addition to reducing the treatment cost. Therefore, the design and development of diagnostic tool for in vivo and in vitro monitoring of DA is of considerable clinical and pharmacological importance. In recent decades, a large number of techniques have been established for DA detection, including chromatography coupled to mass spectrometry, spectroscopic approaches, and electrochemical (EC) methods. These methods are effective, but most of them still have some drawbacks such as consuming time, effort, and money. Added to that, sometimes they need complex procedures to obtain good sensitivity and suffer from low selectivity due to interference from other biological species such as uric acid (UA) and ascorbic acid (AA). Advanced materials can offer remarkable opportunities to overcome drawbacks in conventional DA sensors. This review aims to explain challenges related to DA detection using different techniques, and to summarize and highlight recent advancements in materials used and approaches applied for several sensor surface modification for the monitoring of DA. Also, it focuses on the analytical features of the EC and optical-based sensing techniques available.

Fabrication of carbon dots@restricted access molecularly imprinted polymers for selective detection of metronidazole in serum

A custom-tailored design was proposed for the fabrication of carbon dots coupled with restricted access materials and molecularly imprinted polymers (CDs@RAM-MIPs) to detect metronidazole (MNZ). Biomass carbon dots (CDs) were derived from longan peels assisted with high pressure microwave, and had the merits of eco-friendly, excellent photostability and low toxicity. In this work, glycidyl methacrylate was used as a co-polymeric monomer to increase hydroxyl groups on the surface of synthetic materials, which eliminated the interference of biological macromolecules. The specific binding cavities of CDs@RAM-MIPs were formed after removing the template molecule (MNZ). The obtained CDs@RAM-MIPs can selectively capture MNZ through the specific interaction between recognition sites and MNZ, and obey photoinduced electron transfer fluorescence quenching mechanism. The highly sensitive and selective fluorescent sensor based CDs@RAM-MIPs had a wide linear range (50-1200 ng mL^-1) and a low detection limit (17.4 ng mL^-1) for MNZ. It has been utilized to detect MNZ in serum with recoveries of 93.5%-102.7%, and the relative standards (RSDs) were 1.9%-3.6%, respectively. This work provides a thoughtful strategy for preparation and application of CDs@RAM-MIPs, which presages its great potential for detecting trace compounds in real samples.

One-pot synthesis of carbon dots with intrinsic folic acid for synergistic imaging-guided photothermal therapy of prostate cancer cells

Photothermal therapy (PTT) is performed using near-infrared-responsive agents, which is proven to be an effective therapeutic strategy against cancer with several advantages including minimal invasion, high effectiveness, and easy implementation. Herein, we report a facile and novel one-pot synthetic approach for the fabrication of polydopamine-folate carbon dots (PFCDs) as theranostic nanocarriers for the image-guided PTT targeting of prostate cancer (PCa) cells that express a prostate-specific membrane antigen (PSMA) (folate hydrolase 1). The as-fabricated PFCDs exhibited several advantages such as easy preparation, high biocompatibility, low toxicity, good water-solubility, and excellent photothermal effect with robust blue fluorescence emission. The PSMA-directed imaging of PCa using PFCDs showed remarkable fluorescence enhancement in LNCap cells as compared to the case of other cells that did not express PSMA. PFCDs exhibited a photothermal effect in the PCa cells when irradiated with an 808 nm laser, which possibly resulted in the complete elimination of the tumor. Thus, these features make PFCDs a promising candidate for PTT. Moreover, PFCD-based PTT provides an effective biomedical platform for cancer therapy.

A Probe for Fluorescence Detection of the Acetylcholinesterase Activity Based on Molecularly Imprinted Polymers Coated Carbon Dots

This paper presents a new probe for fluorescence detection of the acetylcholinesterase (AChE) activity based on molecularly imprinted polymer (MIP) coated carbon dots (C-dots) composite. The C-dots were hydrothermally synthesized with grafted silica surface and sealed with molecularly imprinted polymers in silica pores (MIP@C-dots) in situ. Removed the original template molecules, the MIP@C-dots composite exhibits quite high selectivity for acetylthiocholine (ACh). With AChE, its substrate ACh will be hydrolyzed into thiocholine and the fluorescence signals exhibit a dramatic decrease at 465 nm, Under optimal conditions, the fluorescent probe shows sensitive responses to AChE in the range of 0.01-0.6 mU/mL. The detection limits of AChE are as low as 3 µU/mL. These experiments results validate the novel fluorescent probe based on MIP@C-dots composite, paving a new way to evaluation of AChE activity and Screening inhibitors.

Surface Sensitive Photoluminescence of Carbon Nanodots: Coupling between the Carbonyl Group and π-Electron System

The functional groups and π-electron system of carbon dots (C-dots) were carefully controlled by several innovative chemical methods, without any changes in size, to unravel the relationship between the surface structure and photoluminescence (PL). The results of experiments and theoretical calculations reveal that the PL of C-dots is related to the surface state. The energy gap is determined by the coupling of the π-electron system and carbonyl group, and the quantum yield (QY) is dependent on the carbonyl group. The carbonyl group is the main factor increasing the ratio of nonradiation to radiation recombination, thereby leading to the low QY of C-dots. This work provides a strategy for effectively tuning the structure of C-dots, giving rise to the tunable PL emission wavelength and highly desirable QY, which enables us to further unravel the PL mechanism.

CdTe0.5S0.5/ZnS Quantum Dots Embedded in a Molecularly Imprinted Polymer for the Selective Optosensing of Dopamine

This work describes the preparation of molecularly imprinted polymer (MIP)-modified core/shell CdTe_0.5S_0.5/ZnS quantum dots (QDs). The QDs@MIP particles were used for the selective and sensitive detection of dopamine (DA). Acrylamide, which is able to form hydrogen bonds with DA, and ethylene glycol dimethylacrylate (EGDMA) as cross-linker were used for the preparation of the MIP. Highly cross-linked polymer particles with sizes up to 1 µm containing the dots were obtained after the polymerization. After the removal of the DA template, MIP-modified QDs (QDs@MIP) exhibit a high photoluminescence (PL) with an intensity similar to that of QDs embedded in the nonimprinted polymer (NIP). A linear PL decrease was observed upon addition of DA to QDs@MIP and the PL response was in the linear ranges from 2.63 µM to 26.30 µM with a limit of detection of 6.6 nM. The PL intensity of QDs@MIP was quenched selectively by DA. The QDs@MIP particles developed in this work are easily prepared and of low cost and are therefore of high interest for the sensitive and selective detection of DA in biological samples.

A high-performance fluorescent probe for dopamine detection based on g-C3N4 nanofibers

A novel fluorescent sensor based on g-C₃N₄ nanofibers for the sensitive detection of dopamine (DA) has been proposed. We synthesized g-C₃N₄ nanofibers by directly hydrolyzing bulk g-C₃N₄ in the alkaline atmosphere (3 M NaOH). The obtained ultrathin g-C₃N₄ nanofibers were verified by characterizations of Transmission electronic microscope (TEM), X-ray diffractometer (XRD), Fourier transformation-infrared (FT-IR) and X-ray photoelectron spectroscopy (XPS). It was found that the fluorescence intensity of g-C₃N₄ nanofibers was obviously quenched by DA. Fluorescence resonance energy transfer (FRET) between DA and g-C₃N₄ nanofibers led to the fluorescence reduction of g-C₃N₄ nanofibers. The fluorescent probe based on g-C₃N₄ nanofibers exhibits linear responses to the concentration of DA in the range from 0 to 4 μM and 4 to 20 μM, the limit of detection is 17 nM. The fluorescent probe shows excellent stability, good selectivity with its application in serums.

Advances in Molecularly Imprinting Technology for Bioanalytical Applications

In recent years, along with the rapid development of relevant biological fields, there has been a tremendous motivation to combine molecular imprinting technology (MIT) with biosensing. In this situation, bioprobes and biosensors based on molecularly imprinted polymers (MIPs) have emerged as a reliable candidate for a comprehensive range of applications, from biomolecule detection to drug tracking. Unlike their precursors such as classic immunosensors based on antibody binding and natural receptor elements, MIPs create complementary cavities with stronger binding affinity, while their intrinsic artificial polymers facilitate their use in harsh environments. The major objective of this work is to review recent MIP bioprobes and biosensors, especially those used for biomolecules and drugs. In this review, MIP bioprobes and biosensors are categorized by sensing method, including optical sensing, electrochemical sensing, gravimetric sensing and magnetic sensing, respectively. The working mechanism(s) of each sensing method are thoroughly discussed. Moreover, this work aims to present the cutting-edge structures and modifiers offering higher properties and performances, and clearly point out recent efforts dedicated to introduce multi-sensing and multi-functional MIP bioprobes and biosensors applicable to interdisciplinary fields.