Glycosylated aniline polymer sensor: amine to imine conversion on protein-carbohydrate binding

Tuning Surface Properties via Plasma Treatments for the Improved Capture of MicroRNA Biomarkers

Advanced materials could bring about fundamental improvements in the evolution of innovative analytical devices, i.e., biosensors or lab-on-a-chip devices, in particular in the context of liquid biopsies. Here, plasma deposition processes were tested for the introduction of primary amines on silicon surfaces by tuning the amounts and availability of amino-charged residues. Different binary (CH₄/NH₃) and ternary (CH₄/NH₃/H₂ and CH₄/NH₃/N₂) mixtures of gases were used as feeds for the plasma treatments. The obtained surfaces were fully characterized for their chemical and physical properties before their use as capture materials in a functional test. Synthetic and fluorescently conjugated microRNA-21 (miR-21) was selected as the target molecule. The capture of miR-21 increased linearly with the increase in amino nitrogen measured on surfaces. The surface showing the most promising performance was further analyzed in different conditions, i.e., varying pH and time of incubation, incubation with different microRNAs, and possible elution of captured microRNAs. The apparent pH range of primary amines present on the surfaces was around 3.5–4. Positively charged surfaces prepared via PE-CVD were, therefore, demonstrated as being suitable materials for the capture of microRNA biomarkers, paving the way for their inclusion in biomedical devices for the purification and analysis of circulating biomarkers.

Glycoprotein- and Lectin-Based Approaches for Detection of Pathogens

Infectious diseases alone are estimated to result in approximately 40% of the 50 million total annual deaths globally. The importance of basic research in the control of emerging and re-emerging diseases cannot be overemphasized. However, new nanotechnology-based methodologies exploiting unique surface-located glycoproteins or their patterns can be exploited to detect pathogens at the point of use or on-site with high specificity and sensitivity. These technologies will, therefore, affect our ability in the future to more accurately assess risk. The critical challenge is making these new methodologies cost-effective, as well as simple to use, for the diagnostics industry and public healthcare providers. Miniaturization of biochemical assays in lab-on-a-chip devices has emerged as a promising tool. Miniaturization has the potential to shape modern biotechnology and how point-of-care testing of infectious diseases will be performed by developing smart microdevices that require minute amounts of sample and reagents and are cost-effective, robust, and sensitive and specific. The current review provides a short overview of some of the futuristic approaches using simple molecular interactions between glycoproteins and glycoprotein-binding molecules for the efficient and rapid detection of various pathogens at the point of use, advancing the emerging field of glyconanodiagnostics.

Self-regulation in chemical and bio-engineering materials for intelligent systems

Herein, the authors review the self-regulation system secured by well-designed hybrid materials, composites, and complex system. As a broad concept, the self-regulated material/system has been defined in a wide research field and proven to be of great interest for use in a biomedical system, mechanical system, physical system, as the fact of something such as an organisation regulating itself without intervention from external perturbation. Here, they focus on the most recent discoveries of self-regulation phenomenon and progress in utilising the self-regulation design. This paper concludes by examining various practical applications of the remarkable materials and systems including manipulation of the oil/water interface, cell out-layer structure, radical activity, electron energy level, and mechanical structure of nanomaterials. From material science to bioengineering, self-regulation proves to be not only viable, but increasingly useful in many applications. As part of intelligent engineering, self-regulatory materials are expected to be more used as integrated intelligent components.

Glycan and lectin biosensors

A short description about the importance of glycan biorecognition in physiological (blood cell type) and pathological processes (infections by human and avian influenza viruses) is provided in this review. Glycans are described as much better information storage media, compared to proteins or DNA, due to the extensive variability of glycan structures. Techniques able to detect an exact glycan structure are briefly discussed with the main focus on the application of lectins (glycan-recognising proteins) in the specific analysis of glycans still attached to proteins or cells/viruses. Optical, electrochemical, piezoelectric and micromechanical biosensors with immobilised lectins or glycans able to detect a wide range of analytes including whole cells/viruses are also discussed.

Acoustofluidic bacteria separation

Bacterial separation from human blood samples can help with the identification of pathogenic bacteria for sepsis diagnosis. In this work, we report an acoustofluidic device for label-free bacterial separation from human blood samples. In particular, we exploit the acoustic radiation force generated from a tilted-angle standing surface acoustic wave (taSSAW) field to separate E. coli from human blood cells based on their size difference. Flow cytometry analysis of the E. coli separated from red blood cells (RBCs) shows a purity of more than 96%. Moreover, the label-free electrochemical detection of the separated E. coli displays reduced non-specific signals due to the removal of blood cells. Our acoustofluidic bacterial separation platform has advantages such as label-free separation, high biocompatibility, flexibility, low cost, miniaturization, automation, and ease of in-line integration. The platform can be incorporated with an on-chip sensor to realize a point-of-care (POC) sepsis diagnostic device.

Recent Progress in Electrochemical Biosensors for Glycoproteins

This review provides an overview of recent progress in the development of electrochemical biosensors for glycoproteins. Electrochemical glycoprotein sensors are constructed by combining metal and carbon electrodes with glycoprotein-selective binding elements including antibodies, lectin, phenylboronic acid and molecularly imprinted polymers. A recent trend in the preparation of glycoprotein sensors is the successful use of nanomaterials such as graphene, carbon nanotube, and metal nanoparticles. These nanomaterials are extremely useful for improving the sensitivity of glycoprotein sensors. This review focuses mainly on the protocols for the preparation of glycoprotein sensors and the materials used. Recent improvements in glycoprotein sensors are discussed by grouping the sensors into several categories based on the materials used as recognition elements.

Glycosylated Conductive Polymer: A Multimodal Biointerface for Studying Carbohydrate-Protein Interactions

Carbohydrate-protein interactions occur through glycoproteins, glycolipids, or polysaccharides displayed on the cell surface with lectins. However, studying these interactions is challenging because of the complexity and heterogeneity of the cell surface, the inherent structural complexity of carbohydrates, and the typically weak affinities of the binding reactions between the lectins and monovalent carbohydrates. The lack of chromophores and fluorophores in carbohydrate structures often drives such investigations toward fluorescence labeling techniques, which usually require tedious and complex synthetic work to conjugate fluorescent tags with additional risk of altering the reaction dynamics. Probing these interactions directly on the cell surface is even more difficult since cells could be too fragile for labeling or labile dynamics could be affected by the labeled molecules that may interfere with the cellular activities, resulting in unwanted cell responses. In contrast, label-free biosensors allow real-time monitoring of carbohydrate-protein interactions in their natural states. A prerequisite, though, for this strategy to work is to mimic the coding information on potential interactions of cell surfaces onto different biosensing platforms, while the complementary binding process can be transduced into a useful signal noninvasively. Through carbohydrate self-assembled monolayers and glycopolymer scaffolds, the multivalency of the naturally existing simple and complex carbohydrates can be mimicked and exploited with label-free readouts (e.g., optical, acoustic, mechanical, electrochemical, and electrical sensors), yet such inquiries reflect only limited aspects of complicated biointeraction processes due to the unimodal transduction. In this Account, we illustrate that functionalized glycosylated conductive polymer scaffolds are the ideal multimodal biointerfaces that not only simplify the immobilization process for surface fabrication via electrochemical polymerization but also enable the simultaneous analysis of the binding events with orthogonal electrical, optical, or mass sensing label-free readouts. We established this approach using polyaniline and polythiophene as examples. Two general methods were demonstrated for glycosylated polymer fabrications (i.e., electropolymerization of monomer bearing α-mannoside residues or click chemistry based mannose conjugation to electrochemically preformed quinone fused polymer with potential to introduce different carbohydrate moieties and construct glycan arrays in a similar manner). Their conjugated π system extending over a large number of recurrent monomer units renders them sensitive optoelectronic materials. The carbohydrate-protein interactions on the side chain could disrupt the electrostatic, H-bonding, steric, or van der Waals interactions within or between polymers, leading to a change of conductivity or optical absorption of the conductive polymers. This will allow concurrent interrogation of these interactions with adjoining biological processes and mechanisms in multimodal fashion. Furthermore, the functionalized glycosylated conductive polymers can be designed and synthesized with controlled oxidation states, desired ionic dopants, and the imperative density and orientation of the sugar ligands that enable the assessment of differential receptor binding profiles of carbohydrate-protein interactions with much more detailed information and high accuracy. Finally, the glycosylated biosensing interfaces were successfully validated for their applications in Gram-negative bacterial detection, antibiotic resistance studies, and antimicrobial susceptibility assays, all based on inferring carbohydrate-protein interactions directly on cell surfaces, thus illustrating their potential uses in infectious disease research, clinical diagnostics, and environmental monitoring of harmful pathogens.

Morphogen Electrochemically Triggered Self-Construction of Polymeric Films Based on Mussel-Inspired Chemistry

Inspired by the strong chemical adhesion mechanism of mussels, we designed a catechol-based electrochemically triggered self-assembly of films based on ethylene glycol molecules bearing catechol groups on both sides and denoted as bis-catechol molecules. These molecules play the role of morphogens and, in contrast to previously investigated systems, they are also one of the constituents, after reaction, of the film. Unable to interact together, commercially available poly(allylamine hydrochloride) (PAH) chains and bis-catechol molecules are mixed in an aqueous solution and brought in contact with an electrode. By application of defined potential cycles, bis-catechol molecules undergo oxidation leading to molecules bearing "reactive" quinone groups which diffuse toward the solution. In this active state, the quinones react with amino groups of PAH through Michael addition and Schiff's base condensation reaction. The application of cyclic voltammetry (CV) between 0 and 500 mV (vs Ag/AgCl, scan rate of 50 mV/s) of a PAH/bis-catechol solution results in a fast self-construction of a film that reaches a thickness of 40 nm after 60 min. The films present a spiky structure which is attributed to the use of bis-functionalized molecules as one component of the films. XPS measurements show the presence of both PAH and bis-catechol cross-linked together in a covalent way. We show that the amine/catechol ratio is an important parameter which governs the film buildup. For a given amine/catechol ratio, it does exist an optimum CV scan rate leading to a maximum of the film thickness as a function of the scan rate.

Recent Progress in Lectin-Based Biosensors

This article reviews recent progress in the development of lectin-based biosensors used for the determination of glucose, pathogenic bacteria and toxins, cancer cells, and lectins. Lectin proteins have been widely used for the construction of optical and electrochemical biosensors by exploiting the specific binding affinity to carbohydrates. Among lectin proteins, concanavalin A (Con A) is most frequently used for this purpose as glucose- and mannose-selective lectin. Con A is useful for immobilizing enzymes including glucose oxidase (GOx) and horseradish peroxidase (HRP) on the surface of a solid support to construct glucose and hydrogen peroxide sensors, because these enzymes are covered with intrinsic hydrocarbon chains. Con A-modified electrodes can be used as biosensors sensitive to glucose, cancer cells, and pathogenic bacteria covered with hydrocarbon chains. The target substrates are selectively adsorbed to the surface of Con A-modified electrodes through strong affinity of Con A to hydrocarbon chains. A recent topic in the development of lectin-based biosensors is a successful use of nanomaterials, such as metal nanoparticles and carbon nanotubes, for amplifying output signals of the sensors. In addition, lectin-based biosensors are useful for studying glycan expression on living cells.

An ultrasensitive impedimetric glycan biosensor with controlled glycan density for detection of lectins and influenza hemagglutinins

An impedimetric glycan biosensor with optimised glycan density was applied for the detection of lectins and influenza hemagglutinins down to attomolar concentrations (aM).

Facile fabrication of diphenylalanine peptide hollow spheres using ultrasound-assisted emulsion templates

Unilocular and multilocular diphenylalanine peptide hollow spheres were fabricated by an ultrasound-assisted emulsion droplet template method.

XPS in development of chemical sensors

XPS represents a powerful tool for investigation of chemistry involved in chemical sensors, as analytes and recognition elements interact at a device surface, the region analyzed by the spectroscopic technique.

Are glycan biosensors an alternative to glycan microarrays?

Complex carbohydrates (glycans) play an important role in nature and study of their interaction with proteins or intact cells can be useful for understanding many physiological and pathological processes. Such interactions have been successfully interrogated in a highly parallel way using glycan microarrays, but this technique has some limitations. Thus, in recent years glycan biosensors in numerous progressive configurations have been developed offering distinct advantages compared to glycan microarrays. Thus, in this review advances achieved in the field of label-free glycan biosensors are discussed.

Sensitive electrochemical aptamer biosensor for dynamic cell surface N-glycan evaluation featuring multivalent recognition and signal amplification on a dendrimer-graphene electrode interface

We demonstrate a multivalent recognition and highly selective aptamer signal amplification strategy for electrochemical cytosensing and dynamic cell surface N-glycan expression evaluation by the combination of concanavalin A (Con A), a mannose binding protein, as a model, conjugated poly(amidoamine) dendrimer on a chemically reduced graphene oxide (rGO-DEN) interface, and aptamer- and horseradish peroxidase-modified gold nanoparticles (HRP-aptamer-AuNPs) as nanoprobes. In this strategy, the rGO-DEN can not only enhance the electron transfer ability but also provide a multivalent recognition interface for the conjugation of Con A that avoids the weak carbohydrate-protein interaction and dramatically improves the cell capture efficiency and the sensitivity of the biosensor for cell surface glycan. The high-affinity aptamer- and HRP-modified gold nanoparticles provide an ultrasensitive electrochemical probe with excellent specificity. As proof-of-concept, the detection of CCRF-CEM cell (human acute lymphoblastic leukemia) and its surface N-glycan was developed. It has demonstrated that the as-designed biosensor can be used for highly sensitive and selective cell detection and dynamic evaluation of cell surface N-glycan expression. A detection limit as low as 10 cells mL(-1) was obtained with excellent selectivity. Moreover, this strategy was also successfully applied for N-glycan expression inhibitor screening. These results imply that this biosensor has potential in clinical diagnostic and drug screening applications and endows a feasibility tool for insight into the N-glycan function in biological processes and related diseases.

Square-wave voltammetry assays for glycoproteins on nanoporous gold

Electrochemical enzyme-linked lectinsorbent assays (ELLA) were developed using nanoporous gold (NPG) as a solid support for protein immobilization and as an electrode for the electrochemical determination of the product of the reaction between alkaline phosphatase (ALP) and p-aminophenyl phosphate (p-APP), which is p-aminophenol (p-AP). Glycoproteins or concanavalin A (Con A) and ALP conjugates were covalently immobilized onto lipoic acid self-assembled monolayers on NPG. The binding of Con A - ALP (or soybean agglutinin - ALP) conjugate to glycoproteins covalently immobilized on NPG and subsequent incubation with p-APP substrate was found to result in square-wave voltammograms whose peak difference current varied with the identity of the glycoprotein. NPG presenting covalently bound glycoproteins was used as the basis for a competitive electrochemical assay for glycoproteins in solution (transferrin and IgG). A kinetic ELLA based on steric hindrance of the enzyme-substrate reaction and hence reduced enzymatic reaction rate after glycoprotein binding is demonstrated using immobilized Con A-ALP conjugates. Using the immobilized Con A-ALP conjugate, the binding affinity of immunoglobulin G (IgG) was found to be 105 nM, and that for transferrin was found to be 650 nM. Minimal interference was observed in the presence of 5 mg mL-1 BSA as a model serum protein in both the kinetic and competitive ELLA. Inhibition studies were performed with methyl D-mannoside for the binding of TSF and IgG to Con A-ALP; IC50 values were found to be 90 μM and 286 μM, respectively. Surface coverages of proteins were estimated using solution depletion and the BCA protein concentration assay.

Conductive polymers/zeolite (nano-)composites: under-exploited materials

This review provides a snapshot of recent progress in the synthesis, materials properties, and applications of conductive polymers/zeolite (nano-)composites reported until March 2014.

Synthesis of a Novel Polyaniline Glycopolymer and its Lectin Binding Studies

We report the multistep synthesis and polymerisation of a novel aniline derivative with a pendant α-d-mannose substituent. The α-D-mannose functionality was successfully introduced before polymerisation via copper-catalysed azide alkyne click chemistry and the resulting monomer was polymerised using general oxidative polymerisation conditions, producing a water soluble mannosylated polyaniline. The polymer was characterised by several techniques and compared with standard polyaniline. The selective binding of the polymer to Concanavalin A (ConA) was successfully demonstrated by the precipitation of polymer–ConA aggregates. Potential applications of these novel polyaniline glycopolymers could include the development of electroactive biomaterials with the ability to bind mannose receptors, or as sensors for proteins or microbes.