A signal amplification strategy using the cascade catalysis of gold nanoclusters and glucose dehydrogenase for ultrasensitive detection of thrombin

Aptamer functionalized gold nanoclusters as an emerging nanoprobe in biosensing, diagnostic, catalysis and bioimaging

DNA nanostructures, with their fascinating luminescent and detecting capabilities, provide a basis that can accommodate a wide range of applications. The unique electronic configurations, and physical and chemical properties of aptamer-assembled gold nanoclusters (apt-AuNCs) as a novel type of fluorophore have gradually piqued the interest of the scientific community. Bending DNA sequences and other templates/legends as a stabilizing agent with Au metal has produced an abundance of biosensors, along with catalytic and imaging properties. This review article summarizes the synthesis, conjugation tactics, advantages, and sensing mechanisms of AuNCs aptasensor after providing a brief introduction to the topic. Moreover, the application of DNA/aptamer functionalization has been briefly discussed in the fields of food safety and quality, catalysis, clinical diagnosis, cancer cell bioimaging, detection of cancer cell indicators, and therapy. We also concluded the current obstacles and made recommendations about the future prospects of AuNCs for fundamental research and applications in line with the developments in DNA/aptamer-AuNCs.

A novel label-free solid-state electrochemiluminescence sensor based on the resonance energy transfer from Ru(bpy)32+ to GO for DNA hybridization detection

Based on electrochemiluminescence resonance energy transfer (ERET) from Ru(bpy)₃²⁺ to graphene oxide (GO), a novel label-free solid-state ECL sensor for sensitive detection of DNA was proposed. First, Ru(bpy)₃²⁺/AuNPs was successfully prepared by using a simple and green method and characterized by transmission electron microscopy (TEM), Energy Dispersive X-ray (EDX), and UV-vis spectroscopy. Then, the Ru(bpy)₃²⁺/AuNPs colloid was assembled on the gold electrode surface for solid-state ECL film which also later could be used to immobilize thiol-derivatized, single-stranded DNA (HS-ssDNA) via Au-S interactions. The stepwise modification procedure was characterized by cyclic voltammetry(CV), electrochemical impedance spectroscopy (EIS), probe approach curves (PAC) and ECL, respectively. The resulting modified electrode was tested as ECL biosensor for DNA detection. Upon addition of GO, the strong noncovalent interaction between HS-ssDNA and GO led to ECL quenching because of ERET. When in the presence of target ssDNA (t-ssDNA), the distance between the HS-ssDNA and GO increased, which significantly hindered the ERET and, thus, resulted in the restoration of ECL. The ECL intensity of the biosensor increased linearly with t-ssDNA concentration in the range of 50-1000pM, and the detection limit is 20pM. To the best of our knowledge, this is the first application of solid-state ERET from Ru(bpy)₃²⁺ to GO and opens new opportunities for sensitive detection of biorecognition events.

Enzyme-Metal Hybrid Catalysts for Chemoenzymatic Reactions

Enzyme-metal hybrid catalysts (EMHCs), which combine enzymatic and metal catalysis, provide tremendous possibilities for new chemoenzymatic cascade reactions. Here, an overview of the representative achievements in the design of EMHCs and their applications in chemoenzymatic cascade reactions are presented. The preparation of hybrid catalysts is classified into two categories: coimmobilized enzyme-metal heterogeneous catalysts and carrier-free enzyme-metal bioconjugates. Examples of one-pot chemoenzymatic cascade processes catalyzed by the hybrid catalysts are then provided as potential applications. Finally, the limitations and future perspectives of EMHCs are discussed.

The various levels of integration of chemo- and bio-catalysis towards hybrid catalysis

Hybrid catalysis is an emerging concept that combines chemo- and biocatalysts in a wide variety of approaches. Combining the specifications and advantages of multiple disciplines, it is a very promising way to diversify tomorrow's catalysis.

Colorimetric ultrasensitive detection of DNA based on the intensity of gold nanoparticles with dark-field microscopy

We present an ultrasensitive colorimetric nucleic acid assay based on the intensity of gold nanoparticles (Au NPs) using dark field microscopy. In the absence of target DNA, two hairpin-like DNA strands with protruding single-stranded DNA (ssDNA) can be absorbed onto the Au NP surface via non-covalent interactions between the exposed nitrogen bases of ssDNA and Au NPs, which inhibits Au NPs from aggregating in a high concentration of salt media, while in the presence of target DNA, two hairpin DNA strands hybridize with target DNA to form double-stranded DNA (dsDNA). After hybridization chain reaction (HCR) amplification, rigid dsDNA polymers are formed, which results in serious Au NP aggregation in the salt environment. By measuring the intensity change of yellow and red dots on a dark-field image, the concentration of target DNA can be accurately quantified with a limit of detection (LOD) of 66 fM.

Androgen receptor mitigates postoperative disease progression of hepatocellular carcinoma by suppressing CD90+ populations and cell migration and by promoting anoikis in circulating tumor cells

Purpose

Although hepatectomy and liver transplantation surgery for hepatocellular carcinoma (HCC) are effective treatment modalities, the risk of recurrence remains high, particularly in patients with a high number of circulating tumor cells (CTCs) expressing cancer stem/progenitor cell markers. Androgen receptor (AR) signaling has been shown to suppress HCC metastasis in rodent models of HCC. In this study, we investigated whether AR is associated with postoperative HCC recurrence.

Experimental Design

CTCs were obtained from patients with HCC who had undergone hepatectomy to investigate whether they are associated with disease outcome. AR knockout was introduced in two mouse models of spontaneous HCC (carcinogen- and hepatitis B virus-related HCC) to delineate the role that AR plays in HCC recurrence. Biological systems analysis was used to investigate the cellular and molecular mechanisms.

Results

We found that the expression of AR in CTCs was negatively associated with HCC recurrence/progression after hepatectomy. Our results suggest that AR-mediated suppression of HCC recurrence/progression is governed by a three-pronged mechanism. First, AR suppresses the expression of CD90 in CTCs by upregulating Histone 3H2A. Second, AR suppresses cell migration at the transcriptome level. Third, AR promotes anoikis of CTCs via dysregulation of cytoskeletal adsorption.

Conclusions

The results indicate that AR expression may be the gatekeeper of postoperative HCC recurrence. Therefore, targeting AR in presurgical down-staging procedures may serve as a secondary prevention measure against HCC recurrence in the future.

A sensitive sandwich-type electrochemical aptasensor for thrombin detection based on platinum nanoparticles decorated carbon nanocages as signal labels

In this work, a novel and sensitive sandwich-type electrochemical aptasensor has been developed for thrombin detection based on platinum nanoparticles (Pt NPs) decorated carbon nanocages (CNCs) as signal tags. The morphological and compositional of the Pt NPs/CNCs were examined using transmission electron microscopy, X-ray diffraction, and Raman spectroscopy. The results showed that the Pt NPs with about 3-5nm in diameter were well dispersed on the surface of CNCs. The thiolated aptamer was firstly immobilized on the gold electrode to capture the thrombin molecules, and then aptamer functionalized Pt NPs/CNCs nanocomposites were used to fabricate a sandwich sensing platform. Then, the high-content Pt NPs on carbon nanocages acting as hydrogen peroxide-mimicking enzyme catalyzed the reduction of H2O2, resulting in significant electrochemical signal amplification. Differential pulse voltammetry is employed to detect thrombin with different concentrations. Under optimized conditions, the approach provided a good linear response range from 0.05 pM to 20nM with a low detection limit of 10fM. This Pt NPs/CNCs-based aptasensor shows good precision, acceptable stability and reproducibility, which provided a promising strategy for electrochemical aptamer-based detection of other biomolecules.

Ultrasensitive Electrochemical Biosensor for HIV Gene Detection Based on Graphene Stabilized Gold Nanoclusters with Exonuclease Amplification

Because human immunodeficiency virus (HIV) has been one of the most terrible viruses in recent decades, early diagnosis of the HIV gene is of great importance for all scientists around the world. In our work, we developed a novel electrochemical biosensor based on one-step ultrasonic synthesized graphene stabilized gold nanocluster (GR/AuNC) modified glassy carbon electrode (GCE) with an exonuclease III (Exo III)-assisted target recycling amplification strategy for the detection of HIV DNA. It is the first time that GR/AuNCs have been used as biosensor platform and aptamer with cytosine-rich base set as capture probe to construct the biosensor. With the combination of cytosine-rich capture probe, good conductivity and high surfaces of GR/AuNCs, and Exo III-assisted target recycling amplification, we realized high sensitivity and good selectivity detection of target HIV DNA with a detection limit of 30 aM (S/N = 3). Furthermore, the proposed biosensor has a promising potential application for target detection in human serum analysis.

A new electrochemical aptasensor based on electrocatalytic property of graphene toward ascorbic acid oxidation

Based on the superior electrocatalytic property of graphene (GN) toward ascorbic acid (AA) oxidation, a new electrochemical aptasensor has been developed. Here, adenosine triphosphate (ATP) is used as the model to demonstrate the performance of the developed aptasensor. Briefly, GN is attached to the thiolated ATP binding aptamer (ABA) modified gold electrode through π-π stacking interaction, resulting in a significant oxidation signal of AA. In the presence of ATP, the formation of ATP-ABA complex leads to the release of GN from sensing interface, resulting in a sharp decrease of the oxidation peak current of AA and an obviously positive shift of the related peak potential. Taking both the change values of the peak current and peak potential of AA oxidation as the response signals, ATP can be detected sensitively. This is the first time to demonstrate the application of GN as the nanocatalyst in an amplified aptasensor. It can be expected that GN, as nanocatalyst, should become the very promising amplifying-elements in DNA-based electrochemical biosensors.

A label-free electrochemical aptasensor based on the catalysis of manganese porphyrins for detection of thrombin

A novel manganese porphyrin (MnPP)-catalyzed aerobic oxidation of l-cysteine to disulfides (RSSR) was firstly found and applied into electrochemical aptasensor with a label-free technique for signal amplification. The possible catalytic mechanism of the catalytic reaction where MnPP catalyzed l-cysteine with thiol (RSH) structure to RSSR was discussed in detail. For fabrication of the aptasensor, thionine (Thi), which served as an electron mediator, was mixed with MnPP and immobilized on the nafion coated carbon electrode through ion exchange adsorption. Gold nanoparticle (nano-Au) was assembled on the Thi for immobilizing thrombin binding aptamer (TBA). In the presence of thrombin (TB), TBA will capture TB and form TBA-TB composite thus perturbed electron transfer, leading to decrease of the current for quantitatively detecting TB. Under optimal condition, the electrochemical aptasensor exhibited a linear range of 0.1-25nM with a detection limit of 0.02nM. This work opens a novel way for signal amplification study about porphyrins that served as mimetic enzyme to thiol in electrochemical aptasensor.

Hyperbranched rolling circle amplification based electrochemiluminescence aptasensor for ultrasensitive detection of thrombin

An ultrasensitive electrochemiluminescence (ECL) aptamer sensor for protein (thrombin as an example) detection based on hyperbranched rolling circle amplification (HRCA) had been developed. A complementary single-strand DNA (CDNA) of the thrombin aptamer had been modified on the gold electrode firstly, and then hybridized with thrombin aptamer to make the aptamer immobilized on the electrode surface, in the presence of thrombin, aptamer-thrombin bioaffinity complexes formed and made thrombin aptamer leave the electrode surface. Thus, the linear padlock probe hybridized with the free CDNA on the electrode surface and circularized by Escherichia coli DNA ligase. Subsequently, the linear padlock probe was served as a template for the initiation of HRCA reaction, and a lot of dsDNA modified on the electrode surface. Then Ru(phen)₃²⁺ (acted as the ECL indicator) intercalates specifically into double-stranded DNA (dsDNA) grooves to generate ECL signal. The ECL intensity of the system has a linear relationship with thrombin concentration in the range of 3.0-300 aM with a detection limit of 1.2 aM (S/N=3). The proposed method combines the high sensitivity of ECL, exponential amplification of HRCA for signal enhancement and high selectivity of aptamer.

Amplified amperometric aptasensor for selective detection of protein using catalase-functional DNA-PtNPs dendrimer as a synergetic signal amplification label

In this work, we present a new strategy to construct an electrochemical aptasensor for sensitive detection of platelet-derived growth factor BB (PDGF-BB) based on the synergetic amplification of a three-dimensional (3D) nanoscale catalase (CAT) enzyme-functional DNA-platinum nanoparticles (PtNPs) dendrimer through autonomous layer-by-layer assembly. Firstly, polyamidoaminedendrimer (PAMAM) with a hyper-branched and three-dimensional structure was served as nanocarriers to coimmobilize a large number of PDGF-BB binding aptamer (PBA II) and ssDNA 1 (S1) to form PBA II-PAMAM-S1 bioconjugate. In the presence of PDGF-BB, the bioconjugate was self-assembled on the electrode by sandwich assay. Following that, the carried S1 propagated a chain reaction of hybridization events between CAT-PtNPs-S1 and CAT-PtNPs-ssDNA 2 (S2) to form a 3D nanoscale CAT-functional PtNPs-DNA dendrimer, which successfully immobilized substantial CAT enzyme and PtNPs with superior catalysis activity. In this process, the formed negatively charged double-helix DNA could cause the intercalation of hexaammineruthenium(III) chloride (RuHex) into the groove via electrostatic interactions. Thus, numerous RuHex redox probes and CAT were decorated inside/outside of the dendrimer. In the presence of H2O2 in electrolytic cell, the synergistic reaction of CAT and PtNPs towards electrocatalysis could further amplify electrochemical signal. Under optimal condition, the CAT-PtNPs-DNA dendrimer-based sensing system presented a linear dependence between the reduction peak currents and logarithm of PDGF-BB concentrations in the range of 0.00005-35 nM with a relatively low detection limit of 0.02 pM.