A novel core-satellite CdTe/Silica/Au NCs hybrid sphere as dual-emission ratiometric fluorescent probe for Cu2+

A ratiometric fluorescence imprinted sensor based on N-CDs and metal-organic frameworks for visual smart detection of malathion

Sensitive and rapid detection of pesticide residues in food is essential for human safety. A ratiometric imprinted fluorescence sensor N-CDs@Eu-MOF@MIP (BR@MIP) was constructed to sensitively detect malathion (Mal). Europium-based metal organic frameworks (Eu-MOF) were used as supporters to improve the sensitivity of the BR@MIP. N-doped carbon dots (N-CDs) were used as fluorescent source to produce fluorescent signal. A linear relationship between the concentration of Mal and the fluorescence response of the sensor was found in the Mal concentration range of 1-10 μM with a limit of detection (LOD) of 0.05 μM. Furthermore, the sensor was successfully applied for the detection of Mal in lettuce, tap water, and soil samples, with recoveries in the range of 93.0 % - 99.3 %. Additionally, smartphone-based sensors were used to detect Mal in simulated real samples. Thus, the construction of ratiometric imprinted fluorescence sensor has provided a good strategy for the detection of Mal.

Time-resolved Fluorescence DNA-based Sensors for Reducing Background Fluorescence of Environment

The fluorescence assay is one of the popular methods that is applied for detection of different targets. However, this method may show low sensitivity and high background in biological samples due to the natural fluorescence of different compounds in complicated samples. In addition, it inevitably affects the detection results accuracy. A fundamental solution to this problem is the use of the time-resolved fluorescence technique (TRF). The main component of this technique is the use of long fluorescence lifetime reagents. In this review, various time-resolved fluorescent reagents such as complexes of lanthanide ions, lanthanide-doped inorganic nanoparticles; Mn-doped ZnS quantum dots (QDs) and pyrene excimer are introduced. Moreover, TRF sensors, especially TRF aptasensors (DNA-based sensors) are discussed. This review will give new ideas for researchers to develop novel high-sensitive TRF sensors that can remove or decrease background fluorescence and use them for the detection of various targets in complicated samples without treatment.

A highly selective and sensitive ICT-based Cu2+ fluorescent probe and its application in bioimaging

Cu²⁺ is an essential trace element for the organism, but its excess can also cause irreversible damage to the organism. As such, a "Turn-Off" fluorescent probe DPAP for the specific detection of Cu²⁺ was successfully constructed. DPAP exhibits large Stokes shift (120 nm), fast reaction speed (1 min), low detection limit (15.2 nM), low toxicity, and good cell permeability. Cu²⁺ quenches the fluorescence of DPAP by blocking its intramolecular charge transfer process to achieve the detection of Cu²⁺ and has been confirmed by HRMS, ¹H NMR and DFT calculations. Excitingly, the five-cycle detection of Cu²⁺ and the successful recovery of trace Cu²⁺ in environmental water samples fully demonstrate the potential of DPAP for practical applications. In particular, DPAP can observe the distribution and translocation patterns of exogenous Cu²⁺ in HeLa cells and zebrafish in real-time. This research concept has offered important theoretical support for the study of the environmental behavior of heavy metal ions.

Ratiometric fluorescence probe integrated with smartphone for visually detecting lipopolysaccharide

A portable instrument-free detection method for lipopolysaccharide (LPS) analysis was developed based on dual-emission ratiometric fluorescence sensing system. Herein, red-emitting Au nanoclusters (Au NCs) were as reference probe, while blue-emitting fluorescent silica quantum dots (Si QDs) were as response probe. Additionally, the aptamer of LPS was covalently grafted to the surface of Si QDs in order to specific recognize the LPS. According to the changes of fluorescence intensityratio (FL ratio, I_{461 nm}/I_{643 nm}) with the concentrations of LPS, the linear equation was fitted with the range of 50-3000 ng/mL, and the limit of detection (LOD) was 29.3 ng/mL. As a practical application, this method was employed to analyze LPS in normal saline with the recovery rate of 97.7-103.8 %. The color picker platform in the smartphone was used to transform the detection picture to the process of Red, Green and Blue (RGB) for visual detection of LPS. The low-cost and easy-carry method reported here presents broad merits for the visually quantitative detection of LPS.

Fluorescence and Colorimetric Dual-Mode Ratiometric Sensor Based on Zr-Tetraphenylporphyrin Tetrasulfonic Acid Hydrate Metal-Organic Frameworks for Visual Detection of Copper Ions

As a special heavy metal ion, copper ions (Cu²⁺) play an indispensable role in the fields of environmental protection and safety. Their excessive intake not only easily leads to diseases but also affects human health. Therefore, it is particularly important to construct a facile, effective, and highly selective Cu²⁺ probe. Herein, a novel Zr-tetraphenylporphyrin tetrasulfonic acid hydrate (TPPS) metal-organic framework (ZTM) was fabricated using TPPS as the ligand and exhibited strong red fluorescence with a high quantum yield of 12.22%. In addition, we designed a ratiometric fluorescent probe by introducing green fluorescein isothiocyanate (FITC), which was not subject to environmental interference and had high accuracy. When exposed to different amounts of Cu²⁺, the fluorescence emission at 667 nm from ZTMs is remarkably quenched, while that at 515 nm from FITC is enhanced, accompanied by a change in the solutions' fluorescence color from red to green under a UV lamp. Besides, the ZTMs solutions display an excellent ratiometric colorimetric response for Cu²⁺ and produce an obvious color change (from green to colorless) that is visible to the naked eye. The fabricated ZTMs@FITC fluorescent probe exhibits distinguished performance for Cu²⁺ detection with linear ranges of 0.1 to 5 μM and 5 to 50 μM, as well as a low detection limit of 5.61 nM. Moreover, a colorimetric sensor based on ZTMs exhibits a good linear range from 0.1 to 20 μM for Cu²⁺ with the detection limit of 4.96 nM. Furthermore, the dual-signal ratiometric sensor has significant specificity for Cu²⁺ and is successfully applied for monitoring Cu²⁺ in water samples, which proves its practical application value in the environment and biological systems.

Activatable Nanoprobe with Aggregation-Induced Dual Fluorescence and Photoacoustic Signal Enhancement for Tumor Precision Imaging and Radiotherapy

Owing to the high sensitivity and high spatial resolution, fluorescence (FL) imaging has been widely applied for visualizing biological processes. To gain insight into molecular events on deeper tissues, photoacoustic (PA) imaging with better deep-tissue imaging capability can be incorporated to provide complementary visualization and quantitative information on the pathological status. However, the development of activatable imaging probes to achieve both FL and PA signal amplification remains challenging because the enhancement of light absorption in PA imaging often caused the quenching of FL signal. Herein, we first developed a caspase-3 enzyme activatable nanoprobe of a nanogapped gold nanoparticle coated with AIE molecule INT20 and DEVD peptides (AuNNP@DEVD-INT20) for tumor FL and PA imaging and subsequent imaging-guided radiotherapy. The nanoprobe could interact with GSH and caspase-3 enzyme to liberate INT20 molecules, leading to AIE. Simultaneously, the in situ self-assembly of AuNPs was achieved through the cross-linking reaction between the sulfhydryl and the maleimide, resulting in ratiometric PA imaging in tumor. Remarkably, the nanoprobe can generate richful ROS for cancer radiotherapy under X-ray irradiation. The platform not only achieves the aggregation-induced FL and PA signal enhancement but also provides a general strategy for imaging of various biomarkers, eventually benefiting precise cancer therapy.

Ratiometric fluorescent sensor based on MoS2 QDs and AuNCs for determination and bioimaging of alkaline phosphatase

Herein, a ratiometric fluorescent sensor based on MoS₂ quantum dots (QDs) and glutathione-capped gold nanoclusters (AuNCs) was developed for determination and imaging of alkaline phosphatase (ALP). The sensor was developed by covalently linking QDs with AuNCs to form stable MoS₂@AuNCs nanohybrids that exhibited the blue fluorescence of MoS₂ QDs and the red fluorescence of AuNCs. In the presence of Ce³⁺, the fluorescence intensity of AuNCs was increased due to the aggregation-induced emission enhancement (AIEE), while that of MoS₂ QDs remained unchanged, thus could be used as a reference signal. After adenosine 5'-monophosphate (AMP) and ALP were introduced into the system, AMP was hydrolyzed to adenosine and phosphate ions (PO₄^3-). Owing to higher affinity between Ce³⁺ and PO₄^3-, the AIEE effect was inhibited, in turn resulting in the decrease of AuNCs fluorescence. The developed ratiometric fluorescent sensor had a linear response to ALP concentration ranging from 0.5 to 50 U L^-1 with a detection limit (LOD) of 0.08 U L^-1. Moreover, the sensor had low cytotoxicity and was successfully employed in lysosome localization and bioimaging of intracellular ALP in living cells.

Smart Mn7+ Sensing via Quenching on Dual Fluorescence of Eu3+ Complex-Modified TiO2 Nanoparticles

In this work, titania (TiO₂) nanoparticles modified by Eu(TTA)₃Phen complexes (ETP) were prepared by a simple solvothermal method developing a fluorescence Mn⁷⁺ pollutant sensing system. The characterization results indicate that the ETP cause structural deformation and redshifts of the UV-visible light absorptions of host TiO₂ nanoparticles. The ETP also reduce the crystallinity and crystallite size of TiO₂ nanoparticles. Compared with TiO₂ nanoparticles modified with Eu³⁺ (TiO₂-Eu³⁺), TiO₂ nanoparticles modified with ETP (TiO₂-ETP) exhibit significantly stronger photoluminescence under the excitation of 394 nm. Under UV excitation, TiO₂-ETP nanoparticles showed blue and red emission corresponding to TiO₂ and Eu³⁺. In addition, as the concentration of ETP in TiO₂ nanoparticles increases, the PL intensity at 612 nm also increases. When ETP-modified TiO₂ nanoparticles are added to an aqueous solution containing Mn⁷⁺, the fluorescence intensity of both TiO₂ and ETP decreases. The evolution of the fluorescence intensity ratio (I₁/I₂) of TiO₂ and ETP is linearly related to the concentration of Mn⁷⁺. The sensitivity of fluorescence intensity to Mn⁷⁺ concentration enables the design of dual fluorescence ratio solid particle sensors. The method proposed here is simple, accurate, efficient, and not affected by the environmental conditions.

Synthesis of bifunctional fluorescent nanohybrids of carbon dots-copper nanoclusters via a facile method for Fe3+ and Tb3+ ratiometric detection

In this work, a dual-emission ratiometric fluorescent probe of carbon dots-copper nanoclusters (CDs-Cu NCs) nanohybrids with bifunctional features was successfully assembled through mechanical mixing. The CDs were synthesized using ascorbic acid as a carbon source, and Cu NCs were prepared using d-penicillamine as the stabilizer and reducing agent. The as-prepared CDs-Cu NCs displayed two emission peaks (blue at 424 nm and red at 624 nm) when excited at 360 nm, and showed great stability. Interestingly, trace amount of Fe³⁺ could lead to the aggregation of Cu NCs, and induce a drastic static fluorescence quenching at 624 nm because of the electrostatic combination between them, while the fluorescence of the emission peak at 424 nm remained constant. Moreover, an attractive fluorescence enhancement phenomenon at 424 nm was observed when trace Tb³⁺ was added to the above system, which may due to the combination of fluorescence resonance energy transfer (FRET) and photo-induced electron transfer (PET) mechanisms. Thus, CDs-Cu NCs were applied for the ratiometric detection of Fe³⁺ and Tb³⁺ in aqueous solution, and the detection limit (3σ/slope) was 45 nM and 62 nM with the linear range from 0.01 to 40 μM and 0.1 to 50 μM, respectively. Furthermore, the developed sensor was successfully applied for the detection of Fe³⁺ and Tb³⁺ in real-water samples.

Gold cluster-loaded dendritic nanosilica: single particle luminescence and catalytic properties in the bulk

We report a hybrid material in which surface anchoring-induced enhanced luminescence of AuQC@BSA clusters on high surface area dendritic fibrous nanosilica of 800 nm diameter enabled their luminescence imaging at a single particle level. The photophysical and structural properties of the hybrid material were characterized by various spectroscopic and microscopic techniques. Concomitant imaging using scattering and luminescence of such mesostructures and their response to analytes have been used to develop a chemical sensor. The hybrid material was found to be catalytically active in silane to silanol conversion, and 100% conversion was observed in 4 h when the reaction was carried out at 30 °C in the presence of light. Such materials at submicron dimensions with enhanced surface area, emission in the solid state along with a high quantum yield of 12% in water along with enhanced scattering, and surface functionalities present numerous benefits for the creation of multifunctional materials.

Ratiometric determination of Cr(VI) based on a dual-emission fluorescent nanoprobe using carbon quantum dots and a smartphone app

A simple dual-colour fluorescent nanoprobe has been designed composed of blue and yellow emission carbon quantum dots (CQDs). This system is inexpensive and easy to operate and was successfully employed for on-site measurements based on a smartphone app. The designed nanoprobe exhibited increased selectivity for Cr(VI), leading to a double stable response of the two CQDs. The dual-emission nanoprobe showed blue-violet fluorescence upon UV irradiation, and the fluorescent emission peaks were located at 418 nm and 552 nm. The blue light emission of CQDs was quenched with increasing Cr(VI) concentration due to the inner filter effect, whereas the yellow light emission was enhanced due to the aggregation-induced emission effect. The different responses of the dual emissions to Cr(VI) resulted in a fluorescent colour variation, thus enabling facile macroscopic visualization. With a smartphone, the change in the fluorescence colour could be observed more apparently than that of a single fluorescence nanoprobe, and the response increased linearly so that the nanoprobe could be applied to instantaneous measurements. Furthermore, the dual-emission nanoprobe was successfully employed for analysing food and water samples. Accurate concentrations were obtained by constructing a calibration plot using a fluorescence spectrometer and a smartphone app; the recoveries were 81.6% to 107.7%, and the relative standard deviation was below 3.6%. Therefore, this smartphone-integrated dual-emission detection system is promising as a new portable method for the on-site measurement of Cr(VI) ions. * Y-CQDs: yellow emission carbon quantum dots. B-CQDs: blue emission carbon quantum dots. B/Y-CQDs: a mixture of B-CQDs and Y-CQDs.

A dual-emission ratiometric fluorescent nanoprobe based on silicon nanoparticles and carbon dots for efficient detection of Cu(ii)

A novel dual-emission ratiometric fluorescent nanoprobe of Si NP–CD nanocomposites for highly sensitive and selective detection of Cu²⁺.

Universal Platform for Ratiometric Sensing Based on Catalytically Induced Inner-Filter Effect by Cu2

Integrating two kinds of fluorescent probes in one system to develop a ratiometric sensing platform is of prime importance for achieving an accurate assay. Inspired by the efficient overlapped spectrum of 2-aminoterephthalic acid (PTA-NH₂) and 2,3-diaminophenazine (DAP), a new sensitive ratiometric fluorescent sensor has been developed for Cu²⁺ on the basis of in situ converting o-phenylenediamine (OPD) into DAP through the catalysis of Cu²⁺. Here, the presence of Cu²⁺ induced the emission of DAP, which acted as an energy acceptor to inhibit the emission of PTA-NH₂. This dual-emission reverse change ratiometric profile based on the inner-filter effect improved sensitivity and accuracy, and the highly sensitive determination of Cu²⁺ with a detection limit of 1.7 nmol·L^-1 was obtained. The proposed sensing platform displayed the wide range of detection of Cu²⁺ from 5 to 200 nmol·L^-1 by modulating the reaction time between Cu²⁺ and OPD. Moreover, based on the specific interaction between glutathione (GSH) and Cu²⁺, this fluorescent sensor showed high response toward GSH in a range of 0.5-80 μmol·L^-1 with a detection limit of 0.16 μmol·L^-1. The successful construction of this simple ratiometric sensing platform without the participation of enzymes provides a new route for the detection of small biological molecules that are closely related to human health.

Ratiometric fluorescent nanoprobe based on CdTe/SiO2/folic acid/silver nanoparticles core-shell-satellite assembly for determination of 6-mercaptopurine

A sensitive and robust fluorescent assay of 6-MP is described which relies on the facile assembly of a fluorescence nanoprobe by design of silica nanosphere encapsulated CdTe quantum dots (CdTe QDs) as scaffold, coupling with chemically tethered folic acid (FA)-protected silver nanoparticles (AgNPs) that function as responsive element. In this way a stable ternary core-shell-satellite nanostructure with dual-emission signals can be established. On binding to the target molecules, 6-MP, FA molecules initially occupied by AgNPs are liberated to give dose-dependent fluorescence emission, which can further form a self-calibration ratiometric fluorescence assay using CdTe QDs as an internal reference. The nanoprobe color vividly changes from red to blue, enabling the direct visual detection. The linear concentration range is 0.15~50 μM with the detection limit of 67 nM. By virtue of the favorable selectivity and robust assays, the nanoprobe was applied to 6-MP detection in urine samples, with recoveries from 97.3 to 106% and relative standard deviations (RSD) less than 5%. Graphical abstract.

Carbon dots based ratiometric fluorescent sensing platform for food safety

Food safety has become a major global concern and the rapid detection of food nutritional ingredients and contaminants has aroused much more attention. Nanomaterials-based fluorescent sensing holds great potential in designing highly sensitive and selective detection strategies for food safety analysis. Carbon dots (CDs) possess tremendous prospects in fluorescent sensing food ingredients and contaminants due to their superior properties of chemical and photostability, highly fluorescence with tunability, and no/low-toxicity. Numerous endeavors are demanded to contribute to overcoming the challenge of lower sensitivity and selectivity of the sensors interfered by various components in intricate food matrices to ensure food safety and human health. Nanohybrid CDs based ratiometric fluorescent sensing with self-calibration is regarded as an efficient strategy for the CDs based sensors for the specific recognition of target analyte in the food matrices. This work is devoted to reviewing the development of nanohybrid CDs based ratiometric fluorescent sensing platform and the perspectives of the platform for food safety. The applications of nanohybrid CDs in sensing are summarized and the sensing mechanisms are briefly discussed.

Controllable and robust dual-emissive quantum dot nanohybrids as inner filter-based ratiometric probes for visualizable melamine detection

The ratiometric fluorescence technique is of great interest due to its visualization characteristics. The construction of a reliable fluorescent ratiometric nanoprobe for high-sensitivity visual quantification is highly sought after but it is limited by poor stability and controllability. Herein, we report a robust dual-emissive quantum dot nanohybrid with precise color tunability and demonstrate its potential as a two-signal-change ratiometric probe for visual detection. A novel assembly strategy was developed for spatially implanting hydrophobic green and red quantum dots (QDs) into a silica scaffold to form a dual-emissive hierarchical fluorescent silica nanohybrid. The fluorescence intensity ratio and color of the nanohybrid were precisely tailored by altering the amounts of green and red QDs. Particularly, after the alkylsilane-mediated phase transfer and exterior silica shell growth, the nanohybrid exhibited the well-preserved fluorescence features of the original QDs and robust optical/colloid stability. An inner filter-based ratiometric nanoprobe for the visual determination of melamine was ultimately devised by combining the spectra-overlapped two-colored fluorescent nanohybrid with analyte-specific gold nanoparticles. Furthermore, based on the reversible fluorescence signal changes in two-colored QDs induced by melamine, a logic gate strategy for melamine monitoring was constructed. The newly developed fluorescent ratiometric nanoprobe shows great prospects for the visual and quantitative determination of analytes in a complex biological matrix.

A self-calibrating dual responsive platform for the sensitive detection of sulfite and sulfonic derivatives based on a robust Hf(iv) metal–organic framework

A robust Hf-MOF exhibits highly-sensitive and opposite ratiometric fluorescence response towards sulfite and sulfonic derivatives.

Dual-emission ratiometric nanoprobe for visual detection of Cu(II) and intracellular fluorescence imaging

Copper is an essential mineral nutrient for the human body. However, excessive levels of copper accumulated in the body can cause some diseases. Therefore, it is great significant to establish a sensitive bioprobe to recognize copper ions (Cu²⁺) in vivo. In our work, nitrogen-doped carbon dots (N-CDs) and gold nanoclusters (Au NCs) are selected as luminescent nanomaterials and the Au NCs/N- CDs nanohybrids is successfully synthesized by coupling method. The Au NCs/N-CDs exhibited characteristic dual-emission peaks at 450 and 620 nm when excited by a single-wavelength of 380 nm. When different amounts of Cu²⁺ are introduced, the fluorescence intensity of the Au NCs is gradually weakened and fluorescence intensity of the N-CDs is almost unchanged, which can facilitate the visual detection of Cu²⁺. The Au NCs/N-CDs nanohybrid possesses good selectivity to Cu²⁺ with a limit of detection (LOD) is 3.5 μM and linear detection range of 10-150 μM. Visualization detection of Cu²⁺ is implemented by using nanoprobe in water samples. Furthermore, the ratiometric nanoprobe is utilized to the toxicity test of liver cancer cells, indicating excellent biocompatibility and low toxicity. This nanoprobe has been used to the intracellular fluorescence imaging. Moreover, this method is expected to be used to monitor the changes of Cu²⁺ concentration in hepatocytes.

Ratiometric Fluorescent Nanoprobe for Highly Sensitive Determination of Mercury Ions

In this study, a novel dual-emission ratiometric fluorescent nanoprobe (RFN) was synthesized and ultilized for highly sensitive determination of mercury ions. In this nanoprobe, fluorescein isothiocyanate (FITC) doped silica (SiO₂) served as a reference signal, FITC–SiO₂ microspheres were synthesized and modified with amino groups, and then Au Nanoclusters (AuNCs) were combined with the amino groups on the surface of the FITC–SiO₂ microspheres to obtain the RFN. The selectivity, stability, and pH of the RFN were then optimized, and the determination of mercury ions was performed under optimal conditions. The probe fluorescence intensity ratio (F₅₂₀ nm/F₆₈₀ nm) and Hg²⁺ concentration (1.0 × 10⁻¹⁰ mol/L to 1.0 × 10⁻⁸ mol/L) showed a good linear relationship, with a correlation coefficient of R² = 0.98802 and a detection limit of 1.0 × 10⁻¹⁰ mol/L, respectively. The probe was used for the determination of trace mercury ion in water samples, and the recovery rate was 98.15~100.45%, suggesting a wide range of applications in monitoring pollutants, such as heavy metal ion and in the area of environmental protection.

Ratiometric fluorescent nanoprobes for visual detection: Design principles and recent advances - A review

Signal generation techniques for visual detection of analytes have received a great deal of attention in various sensing fields. These approaches are considered to be advantageous when instrumentation cannot be employed, such as for on-site assays, point-of-care tests, and he althcare diagnostics in resource-constrained areas. Amongst various visual detection approaches explored for non-invasive quantitative measurements, ratiometric fluorescence sensing has received particular attention as a potential method to overcome the limitations of intensity-based probes. This technique relies on changes in the intensity of two or more emission bands (induced by an analyte), resulting in an effective internal referencing which improves the sensitivity of the detection. The self-calibration, together with the unique optophysical properties of nanoparticles (NPs) have made the ratiometric fluorescent nanoprobes more sensitive and reliable, which in turn, can result in more precise visual detection of the analytes. Over the past few years, a vast number of ratiometric sensing probes using nanostructured fluorophores have been designed and reported for a wide variety of sensing, imaging, and biomedical applications. In this work, a review on the NP-based ratiometric fluorescent sensors has been presented to meticulously elucidate their development, advances and challenges. With a special emphasis on visual detection, the most important steps in the design of fluorescent ratiometric nanoprobes have been given and based on different classes of analytes, recent applications of fluorescent ratiometric nanoprobes have been summarized. The challenges for the future use of the technique investigated in this review have been also discussed.

Ratiometric fluorescent sensor for visual determination of copper ions and alkaline phosphatase based on carbon quantum dots and gold nanoclusters

In this work, a novel ratiometric fluorescent sensor, based on carbon dots (CDs) and gold nanoclusters (AuNCs), is developed for highly sensitive and selective visual colorimetric detection of Cu²⁺ and alkaline phosphatase (ALP). The ratiometric fluorescent sensor was synthesized by covalently linking 11-mercaptoundecanoic acid (11-MUA)-stabilized AuNCs to the surface of amino-functionalized CD/SiO₂ nanoparticles. The red fluorescence of the AuNCs can be quenched by Cu²⁺ owing to coordination between Cu²⁺ and 11-MUA; however, the blue emission of the CDs was insensitive to Cu²⁺ owing to the protective silica shell. The quenching of the AuNCs' fluorescence returned when PPi was added because of the higher affinity between Cu²⁺ and PPi than that between Cu²⁺ and 11-MUA. In the presence of ALP, PPi was catalytically hydrolyzed into phosphate (Pi), which showed a much weaker affinity for Cu²⁺. Thus, Cu²⁺ ions were released, and the fluorescence of the AuNCs was quenched once more. Based on this principle, Cu²⁺ and ALP could be simultaneously detected. The developed ratiometric fluorescent sensor could detect Cu²⁺ over a range from 0.025 to 4 μM with a detection limit of 0.013 μM and ALP over a range from 0.12 to 15 U/L with a detection limit of 0.05 U/L. The present method was successfully applied for the detection of Cu²⁺ and ALP in real water samples and in human serum samples, respectively. This ratiometric fluorescent approach may provide a highly sensitive and accurate platform for visual Cu²⁺ and ALP sensing in environmental monitoring and medical diagnosis.

Engineering of CdTe/SiO2 nanocomposites: Enhanced signal amplification and biocompatibility for electrochemiluminescent immunoassay of alpha-fetoprotein

Electrochemiluminescent (ECL) performance and cytotoxicity of CdTe quantum dots (QDs)-based nanocomposites and its possible application for ECL immunoassay were investigated. Two types of CdTe-based nanocomposites, i.e., SiO₂-coated CdTe (CdTe@SiO₂) and CdTe-functionalized SiO₂ (SiO₂@CdTe), were synthesized and comprehensively compared in regarding of the cytotoxicity and ECL performance. The in vitro cytotoxicity of SiO₂@CdTe and CdTe@SiO₂ nanoparticles was assessed in L02 cells using standard CCK-8 assay, and their ECL performance was investigated by constructing sandwiched immunosensor using SiO₂@CdTe and CdTe@SiO₂ as tags for the labelled antibody, respectively. The results showed that CdTe@SiO₂ exhibited much lower cytotoxicity and a higher ECL intensity than SiO₂@CdTe. Taking the analysis of alpha-fetoprotein (AFP) as an example, the ECL immunosensor using CdTe@SiO₂ as an emitter was proved to have a wide linear dynamic range from 1.0 pg mL^-1 to 100 ng mL^-1 with a low detection limit of 0.22 pg mL^-1 (S/N ratio of 3). The ECL immunosensor also demonstrated satisfactory recovery and excellent reproducibility and stability, indicating that this method has prospects in practical application in the clinical diagnosis of AFP.

A colorimetric and ratiometric fluorescent sensor for sequentially detecting Cu2+ and arginine based on a coumarin–rhodamine B derivative and its application for bioimaging

In this work, a colorimetric and ratiometric fluorescent sensor based on a coumarin–rhodamine B hybrid for the sequential recognition of Cu²⁺ and arginine (Arg) via the FRET mechanism was designed and synthesized. With the addition of Cu²⁺, the solution displayed a colorimetric change from pale yellow to pink which is discernible by the naked eye. Additionally, the fluorescence intensities of the sensor exhibited ratiometric changes for the detection of Cu²⁺ at 490 and 615 nm under a single excitation wavelength of 350 nm, which corresponded to the emissions of coumarin and rhodamine B moieties, respectively. The fluorescence color change could be visualized from blue to pink. The limits of detection were determined to be as low as 0.50 and 0.47 μM for UV-vis and fluorescence measurements, respectively. More importantly, the sensor not only can recognize Cu²⁺ and form a sensor-Cu²⁺ complex but can also sequentially detect Arg with the resulting complex. The detection limits for Arg were as low as 0.60 μM (UV-vis measurement) and 0.33 μM (fluorescence measurement), respectively. A fluorescence imaging experiment in living cells demonstrated that the fabricated sensor could be utilized in ratiometric fluorescence imaging towards intracellular Cu²⁺, which is promising for the detection of low-level Cu²⁺ and Arg with potentially practical significance.

A FRET-based colorimetric and ratiometric coumarin–rhodamine B fluorescent sensor was designed, and its sensing behaviors for sequentially detecting Cu²⁺ and arginine were studied systematically.

Analyte-triggered cyclic autocatalytic oxidation amplification combined with an upconversion nanoparticle probe for fluorometric detection of copper(II)

The authors describe an upconversion nanoparticle-based (UCNP-based) fluorometric method for ultrasensitive and selective detection of Cu²⁺. The UCNPs show a strong emission band at 550 nm under near-infrared excitation at 980 nm. The principle of the strategy is that gold nanoparticles (AuNP) can quench the fluorescence of UCNP. In contrast, the addition of L-cysteine (Cys) can induce the aggregation of AuNP, resulting in a fluorescence recovery of the UCNPs. On addition of Cu²⁺, it oxidizes Cys to cystine and is reduced to Cu⁺. The Cu⁺ thusformed can be oxidized cyclically to Cu²⁺ by dissolved O₂, which catalyzes and recycles the whole reaction. Thus, the aggregation of AuNP is inhibited and the fluorescence recovered by Cys is quenched. Under the optimal condition, the quenching efficiency shows a good linear response to the concentrations of Cu²⁺ in the 0.4-40 nM range. The limit of detection is 0.16 nM, which is 5 orders of magnitude lower than the U.S. Environmental Protection Agency limit for Cu²⁺ in drinking water (20 μM). The method has been further applied to monitor Cu²⁺ levels in real samples. The results of detection are well consistent with those obtained by atomic absorption spectroscopy. Graphical abstract Gold nanoparticles (AuNP) as a high efficient fluorescence quenching reagent of upconversion nanoparticles (UCNP) were used in a fluorometric method for detection of Cu²⁺ based on a cyclic catalytic oxidation amplification strategy.

Highly selective and ratiometric fluorescent nanoprobe for the detection of cysteine and its application in test strips

Cysteine (Cys) is a bithiol that plays a vital role in many physiological processes. However, it is difficult to discriminate Cys from homocysteine (Hcy) and glutathione (GSH), due to their similar chemical structures and reactivity. Herein, we have developed a polymeric nanoprobe, nanoHFA, for ratiometric, highly selective, and sensitive detection of Cys based on 7-hydroxycoumarin-3-carboxylic acid (HC) and fluorescein isothiocyanate (FITC)-acrylate (FITC-A) group-functionalized lipopolymer DSPE-PEG. The probe nanoHFA showed a strong fluorescence emission peak centered at 450 nm attributed to HC and a weak fluorescence emission peak centered at 520 nm due to the photoinduced electron transfer (PET) process of FITC induced by acrylate group. In the presence of Cys, the fluorescence signal at 520 nm could be lit up and the ratio of F_520nm/F_450nm showed a good linear relationship in the range of 5-60 μM with a low detection limit of 0.37 μM. The probe also displayed excellent water solubility and high selectivity to Cys over other biothiols such as Hcy and GSH. Moreover, we further used probe nanoHFA to detect Cu²⁺ ions in the range of 100-550 nM with a detection limit of 77 nM. The nanoprobe was successfully applied for the quantitative detection of Cys in fetal bovine serum, and fluorescent strips were developed for facile and visual detection of Cys and Cu²⁺ ions. Graphical abstract ᅟ.

A molecularly imprinted dual-emission carbon dot-quantum dot mesoporous hybrid for ratiometric determination of anti-inflammatory drug celecoxib

We report on a ratiometric fluorescent sensor based on dual-emission molecularly imprinted mesoporous silica embedded with carbon dots and CdTe quantum dots (mMIP@CDs/QDs) for celecoxib (CLX) as target molecule. The fluorescence of the embedded CDs is insensitive to the analyte while the green emissive QDs are selectively quenched by it. This effect is much stronger for the MIP than for the non-imprinted polymer, which indicates a good recognition ability of the mesoporous MIP. The hybrid sensor also exhibited good selectivity to CLX over other substances. The ratio of the intensity at two wavelengths (F₅₅₀/F₄₄₀) proportionally decreased with the increasing of CLX concentration in the range of 0.08-0.90μM. A detection limit as low as 57nM was achieved. Experimental results testified that this sensor was highly sensitive and selective for the detection of CLX in human serum samples.

A novel dual-emission fluorescent nanohybrid containing silica nanoparticles and gold nanoclusters for ratiometric determination of cysteine based on turn-on fluorescence strategy

A novel fluorescence sensor SiO₂NPs/AuNCs nanohybrid has been used developed for ratiometric visual detection of Cys.

One-step synthesis of boronic acid functionalized gold nanoclusters for photoluminescence sensing of dopamine

This study is the first to report one-step synthesis of boronic acid functionalized gold nanoclusters (AuNCs) using mixed ligands of 4-mercaptophenylboronic acid (MPBA) and glutathione. Furthermore, the emission color of the products can be fancily tuned from green to near-infrared by simply changing the proportion of the two stabilizers. In basic media, dopamine (DA) molecules themselves polymerize each other and form polydopamine with large amounts of cis-diol groups, which then react with boronic acid groups on the AuNC's surface based on the formation of boronate esters. As a result, the photoluminescence of the AuNCs is well quenched by the electron transfer effect. Accordingly, DA molecules are assayed from 0.5 to 9 μM, and the detection limit is as low as 0.1 μM. The as-prepared AuNCs exhibit high selectivity; the existing biomolecules including various amino acids, ascorbic acid, uric acid, glucose, etc, do not interfere with the assay. The proposed method is successfully applied to the assay of DA in human serum, indicating its practical potential.

Dual-emission ratiometric fluorescence detection of aspirin in human saliva: onsite naked-eye detection and high stability

A highly stable ratiometric fluorescence probe based on dual-emission QDs was designed for the visual detection of aspirin in human saliva.

Ratiometric fluorescence, electrochemiluminescence, and photoelectrochemical chemo/biosensing based on semiconductor quantum dots

Ratiometric fluorescent sensors, which can provide built-in self-calibration for correction of a variety of analyte-independent factors, have attracted particular attention for analytical sensing and optical imaging with the potential to provide a precise and quantitative analysis. A wide variety of ratiometric sensing probes using small fluorescent molecules have been developed. Compared with organic dyes, exploiting semiconductor quantum dots (QDs) in ratiometric fluorescence sensing is even more intriguing, owing to their unique optical and photophysical properties that offer significant advantages over organic dyes. In this review, the main photophysical mechanism for generating dual-emission from QDs for ratiometry is discussed and categorized in detail. Typically, dual-emission can be obtained either with energy transfer from QDs to dyes or with independent dual fluorophores of QDs and dye/QDs. The recent discovery of intrinsic dual-emission from Mn-doped QDs offers new opportunities for ratiometric sensing. Particularly, the signal transduction of QDs is not restricted to fluorescence, and electrochemiluminescence and photoelectrochemistry from QDs are also promising for sensing, which can be made ratiometric for correction of interferences typically encountered in electrochemistry. All these unique photophysical properties of QDs lead to a new avenue of ratiometry, and the recent progress in this area is addressed and summarized here. Several interesting applications of QD-based ratiometry are presented for the determination of metal ions, temperature, and biomolecules, with specific emphasis on the design principles and photophysical mechanisms of these probes.

A Novel Ratiometric Probe Based on Nitrogen-Doped Carbon Dots and Rhodamine B Isothiocyanate for Detection of Fe(3+) in Aqueous Solution

A ratiometric probe for determining ferric ions (Fe(3+)) was developed based on nitrogen-doped carbon dots (CDs) and rhodamine B isothiocyanate (RhB), which was then applied to selective detection of Fe(3+) in PB buffer solution, lake water, and tap water. In the sensing system, FePO4 particles deposit on the surface of CDs, resulting in larger particles and surface passivation. The fluorescence (FL) intensity and the light scattering (LS) intensity of CDs can be gradually enhanced with the addition of Fe(3+), while the FL intensity of RhB remains constant. The ratiometric light intensity of CDs LS and RhB FL was quantitatively in response to Fe(3+) concentrations in a dynamic range of 0.01-1.2 μM, with a detection limit as low as 6 nM. Other metal ions, such as Fe(2+), Al(3+), K(+), Ca(2+), and Co(2+), had no significant interference on the determination of Fe(3+). Compared with traditional probes based on single-signal probe for Fe(3+) detection, this dual-signal-based ratiometric probe exhibits a more reliable and stable response on target concentration and is characterized by easy operation in a simple fluorescence spectrophotometer.

Controlled synthesis of a dual-emission hierarchical quantum dot hybrid nanostructure as a robust ratiometric fluorescent sensor

A highly stable and biocompatible CdTe@SiO₂@CdTe@SiO₂ dual-emission hierarchical hybrid nanostructure was synthesized and used as a robust ratiometric fluorescent sensor.

Graphene-quantum-dots-based ratiometric fluorescent probe for visual detection of copper ion

A novel dual-photoluminescence probe for Cu(2+) has been developed, in which the graphene quantum dots with blue emission and CdTe QDs with yellow emission act as internal standard and probe, respectively. The photoluminescence probe exhibited selective sensing for Cu(2+) with a limit of detection (3SD/k) of 5.3 × 10(-8) M and showed its potential application in visual imaging. The results indicated that the constructed probe can be employed for sensing Cu(2+) by the naked eye, and also for monitoring intracellular Cu(2+).

A FRET chemsensor based on graphene quantum dots for detecting and intracellular imaging of Hg²⁺

The detection of Hg(2+) has attracted considerable attention because of the serious health and environmental problems caused by it. Herein, a novel ratiometric fluorescent chemsensor (GQDs-SR) based on the fluorescence resonance energy transfer (FRET) process for detecting of Hg(2+) was designed and synthesized with rhodamine derivative covalently linked onto graphene quantum dots. In this sensor, the graphene quantum dots (GQDs) served as energy donor and the rhodamine derivative turned into an energy acceptor when encountered Hg(2+). The chemsensor exhibited high selectivity, low cytotoxicity, biocompatibility and good water solubility. The results of intracellular imaging experiment demonstrated that GQDs-SR was cell permeable and could be used for monitoring Hg(2+) in living cells, and it was also successfully applied to the detection of Hg(2+) in practical water samples.