Liquid crystal based sensors monitoring lipase activity: a new rapid and sensitive method for cytotoxicity assays

Triglyceride-Tethered Membrane Lipase Sensor

Sensors that can quickly measure the lipase activity from biological samples are useful in enzyme production and medical diagnostics. However, current lipase sensors have limitations such as requiring fluorescent labels, pH control of buffer vehicles, or lengthy assay preparation. We introduce a sparsely tethered triglyceride substrate anchored off of a gold electrode for the impedance sensing of real-time lipase activity. The tethered substrate is self-assembled using a rapid solvent exchange technique and can form an anchored bilayer 1 nm off the gold electrode. This allows for an aqueous reservoir region, providing access to ions transported through membrane defects caused by triglyceride enzymatic hydrolysis. Electrical impedance spectroscopy techniques can readily detect the decrease in resistance caused by enzymatically induced defects. This rapid and reliable lipase detection method can have potential applications in disease studies, monitoring of lipase production, and as point-of-care diagnostic devices.

Liquid Crystal Materials for Biomedical Applications

Liquid crystal is a state of matter being intermediate between solid and liquid. Liquid crystal materials exhibit both orientational order and fluidity. While liquid crystals have long been highly recognized in the display industry, in recent decades, liquid crystals provide new opportunities into the cross-field of material science and biomedicine due to their biocompatibility, multifunctionality, and responsiveness. In this review, the latest achievements of liquid crystal materials applied in biomedical fields are summarized. The start is made by introducing the basic concepts of liquid crystals, and then shifting to the components of liquid crystals as well as functional materials derived therefrom. After that, the ongoing and foreseeable applications of liquid crystal materials in the biomedical field with emphasis put on several cutting-edge aspects, including drug delivery, bioimaging, tissue engineering, implantable devices, biosensing, and wearable devices are discussed. It is hoped that this review will stimulate ingenious ideas for the future generation of liquid crystal-based drug development, artificial implants, disease diagnosis, health status monitoring, and beyond.

State-of-the-Art Development in Liquid Crystal Biochemical Sensors

As an emerging stimuli-responsive material, liquid crystal (LC) has attracted great attentions beyond display applications, especially in the area of biochemical sensors. Its high sensitivity and fast response to various biological or chemical analytes make it possible to fabricate a simple, real-time, label-free, and cost-effective LC-based detection platform. Advancements have been achieved in the development of LC-based sensors, both in fundamental research and practical applications. This paper briefly reviews the state-of-the-art research on LC sensors in the biochemical field, from basic properties of LC material to the detection mechanisms of LC sensors that are categorized into LC-solid, LC–aqueous, and LC droplet platforms. In addition, various analytes detected by LCs are presented as a proof of the application value, including metal ions, nucleic acids, proteins, glucose, and some toxic chemical substances. Furthermore, a machine-learning-assisted LC sensing platform is realized to provide a foundation for device intelligence and automatization. It is believed that a portable, convenient, and user-friendly LC-based biochemical sensing device will be achieved in the future.

Phase transfer of fatty acids into ultrasmall nanospheres for colorimetric detection of lipase and albumin

Colorimetric detection of fatty acids during biological interactions is extremely difficult since they are optically silent. Here, fatty acids are found to function as ion-exchangers in ultrasmall polymeric nanospheres to facilitate the protonation of chromoionophores, causing a vivid color change between red and blue. With an excellent detection limit of 1.8 μg mL^-1 for oleic acid, colorimetric assays for lipase and albumin are developed with quick response, high sensitivity, and low cost.

Development and Application of Liquid Crystals as Stimuli-Responsive Sensors

This focused review presents various approaches or formats in which liquid crystals (LCs) have been used as stimuli-responsive sensors. In these sensors, the LC molecules adopt some well-defined arrangement based on the sensor composition and the chemistry of the system. The sensor usually consists of a molecule or functionality in the system that engages in some form of specific interaction with the analyte of interest. The presence of analyte brings about the specific interaction, which then triggers an orientational transition of the LC molecules, which is optically discernible via a polarized optical image that shows up as dark or bright, depending on the orientation of the LC molecules in the system (usually a homeotropic or planar arrangement). The various applications of LCs as biosensors for glucose, protein and peptide detection, biomarkers, drug molecules and metabolites are extensively reviewed. The review also presents applications of LC-based sensors in the detection of heavy metals, anionic species, gases, volatile organic compounds (VOCs), toxic substances and in pH monitoring. Additionally discussed are the various ways in which LCs have been used in the field of material science. Specific attention has been given to the sensing mechanism of each sensor and it is important to note that in all cases, LC-based sensing involves some form of orientational transition of the LC molecules in the presence of a given analyte. Finally, the review concludes by giving future perspectives on LC-based sensors.

A portable digital optical kanamycin sensor developed by surface-anchored liquid crystal droplets

There is an increase in demand to develop simple, convenient, and low-cost approaches for rapid and label-free detection of antibiotics. Herein, we propose a new principle for the detection of kanamycin using the surface-anchored liquid crystal (LC) droplets. The optical images of the LC droplets uniformly change from four-clover, uniformly dark, and dark cross appearance gradually with the increase of surfactant concentration. The detection of kanamycin is fulfilled with the aid of a cationic surfactant cetyltrimethylammonium bromide (CTAB) and a kanamycin aptamer. The LC droplets show uniformly dark appearance and four-clover appearance in the presence of the aqueous solutions of CTAB and CTAB/aptamer complex, respectively. However, the specific binding of kanamycin to its aptamer can release the CTAB, which induces the uniformly dark appearance of the LC droplets. A portable device is built to measure the optical luminance of the LC droplets. This system can detect kanamycin with a concentration below 0.1 ng/mL (~0.17 nM) and also allows the detection of kanamycin in real samples such as milk and honey. Therefore, it is very promising in the development of new types of LC-based sensors by the surface-anchored LC droplets assisted with a portable optical device.

A Single-Substrate Biosensor with Spin-Coated Liquid Crystal Film for Simple, Sensitive and Label-Free Protein Detection

A liquid crystal (LC)-based single-substrate biosensor was developed by spin-coating an LC thin film on a dimethyloctadecyl[3-(trimethoxysilyl)propyl]ammonium chloride (DMOAP)-decorated glass slide. Compared with the conventional sandwiched cell configuration, the simplified procedure for the preparation of an LC film allows the film thickness to be precisely controlled by adjusting the spin rate, thus eliminating personal errors involved in LC cell assembly. The limit of detection (LOD) for bovine serum albumin (BSA) was lowered from 10-5 g/mL with a 4.2-μm-thick sandwiched cell of the commercial LC E7 to 10-7 g/mL with a 4.2-μm-thick spin-coated E7 film and further to 10-8 g/mL by reducing the E7 film thickness to 3.4 μm. Moreover, by exploiting the LC film of the highly birefringent nematic LC HDN in the immunodetection of the cancer biomarker CA125, an LOD comparable to that determined with a sandwiched HDN cell was achieved at 10-8 g/mL CA125 using a capture antibody concentration an order of magnitude lower than that in the LC cell. Our results suggest that employing spin-coated LC film instead of conventional sandwiched LC cell provides a more reliable, reproducible, and cost-effective single-substrate platform, allowing simple fabrication of an LC-based biosensor for sensitive and label-free protein detection and immunoassay.

Applications of liquid crystals in biosensing

Liquid crystals (LCs), as a promising branch of highly-sensitive, quick-response, and low-cost materials, are widely applied to the detection of weak external stimuli and have attracted significant attention. Over the past decade, many research groups have been devoted to developing LC-based biosensors due to their self-assembly potential and functional diversity. In this paper, recent investigations on the design and application of LC-based biosensors are reviewed, based on the phenomenon that the orientation of LCs can be directly influenced by the interactions between biomolecules and LC molecules. The sensing principle of LC-based biosensors, as well as their signal detection by probing interfacial interactions, is described to convert, amplify, and quantify the information from targets into optical and electrical parameters. Furthermore, commonly-used LC biosensing targets are introduced, including glucose, proteins, enzymes, nucleic acids, cells, microorganisms, ions, and other micromolecules that are critical to human health. Due to their self-assembly potential, chemical diversity, and high sensitivity, it has been reported that tunable stimuli-responsive LC biosensors show bright perspectives and high superiorities in biological applications. Finally, challenges and future prospects are discussed for the fabrication and application of LC biosensors to both enhance their performance and to realize their promise in the biosensing industry.

Aptamer Laden Liquid Crystals Biosensing Platform for the Detection of HIV-1 Glycoprotein-120

We report a label-free and simple approach for the detection of glycoprotein-120 (gp-120) using an aptamer-based liquid crystals (LCs) biosensing platform. The LCs are supported on the surface of a modified glass slide with a suitable amount of B40t77 aptamer, allowing the LCs to be homeotropically aligned. A pronounced topological change was observed on the surface due to a specific interaction between B40t77 and gp-120, which led to the disruption of the homeotropic alignment of LCs. This results in a dark-to-bright transition observed under a polarized optical microscope. With the developed biosensing platform, it was possible to not only identify gp-120, but obtained results were analyzed quantitatively through image analysis. The detection limit of the proposed biosensing platform was investigated to be 0.2 µg/mL of gp-120. Regarding selectivity of the developed platform, no response could be detected when gp-120 was replaced by other proteins, such as bovine serum albumin (BSA), hepatitis A virus capsid protein 1 (Hep A VP1) and immunoglobulin G protein (IgG). Due to attributes such as label-free, high specificity and no need for instrumental read-out, the presented biosensing platform provides the potential to develop a working device for the quick detection of HIV-1 gp-120.

Effect of Single/Mixed Surfactant Systems on Orientations of Liquid Crystals and Interaction of Proteins with Surfactants at Fluid Interfaces

A series of single surfactant systems, i.e, quaternary ammonium-based gemini surfactants with different spacers and alkyl chain lengths (m-n-m; m=12, n=2, 3, 4, 6; n=3, m=12, 14, 16), halogen-free surface-active ionic liquid (HF-SAILs) with different symmetries ([Cnmim][C12H25SO4]; n=6, 8, 10, 12), and single-chain cationic surfactants including 1-dodecyl-3-methylimidazolium bromide ([C12mim]Br) and dodecyltrimethylammonium bromide (DTAB), along with certain combinations of different surfactants (12-3-12/[C12mim]Br and 12-3-12/DTAB) were applied to an aqueous/liquid crystal interface (ALI). All the surfactants could induce an orientational transition of liquid crystals (LCs) from a planar to homeotropic state, which caused a bright-to-dark optical shift. It was proved that double-chain surfactants and the mixed surfactants inclined to adsorb at the ALI triggering the orientational transition. Inspiringly, a quicker and more sensitive dark-to-bright optical response was observed for mixed surfactant system-decorated interfaces in contact with proteins (such as bovine serum albumin (BSA), lysozyme, and trypsin) as opposed to the single surfactant systems. The ALI decorated by the 12-3-12/[C12mim]Br system was particularly efficient and exhibited the most sensitive optical response for BSA (0.01ngmL−1). The order parameters (SCD) of surfactants tails at the interface and the free energy of proteins with 12-3-12 and [C12mim]Br were calculated, respectively. The results explain that the 12-3-12/[C12mim]Br-laden ALI shows a quicker and more sensitive optical response for BSA. This work inspired us to study mixed surfactant systems-decorated LC interfaces and further provides new insights for different chemical and biological applications.

Label-Free, Real-Time Phospholipase-A Isoform Assay

Phospholipase-A (PLA) enzymes catalyze the hydrolysis of ester bonds in select glycerophospholipids. Sensors for rapidly measuring the PLA activity in biological samples have relevance in the study of venom compositions and in medical diagnostics for the diagnosis of diseases such as acute pancreatitis. Current PLA sensor technologies are often restricted by the time it takes to prepare an assay, the necessity of using fluorescent labels, or the fact they might require strict pH control of the buffer vehicles used. Here we present a tethered bilayer lipid membrane (tBLM) impedance sensor array for the rapid and real-time detection of PLA, which includes the ability to selectively detect phospholipase-A₂ (PLA₂) from phospholipase-A₁ (PLA₁) isoforms. Comparing the activity of PLA₁ and PLA₂ in an array of tBLMs composed of ether phospholipids, ester phospholipids or ether-ester phospholipids allows for the rapid and reliable distinction between the isoforms, as measured using swept-frequency electrical impedance spectroscopy. After testing the assay using pure enzymes, we demonstrate the capacity of the sensor to identify specific PLA₂-type, calcium-dependent activity from the venom of the South American bullet ant, Paraponera clavata, at a concentration of 1 μg/mL. The specificity of the phospholipase activity was corroborated using matrix-assisted laser-desorption/ionization time-of-flight mass spectrometry. As further validation, we tested the activities of a PLA₁ isoform in the presence of different buffers commonly used in biology and biochemistry experiments. Sensitivity testing shows that PLA₁ can be detected at an activity as low as 0.06 U/mL. The rapid and reliable detection of phospholipases presented in this study has potential applications in the study of animal venoms as well as in lipase bioreactors and point-of-care devices.

Seeing the Unseen: The Role of Liquid Crystals in Gas-Sensing Technologies

Fast, real-time detection of gases and volatile organic compounds (VOCs) is an emerging research field relevant to most aspects of modern society, from households to health facilities, industrial units, and military environments. Sensor features such as high sensitivity, selectivity, fast response, and low energy consumption are essential. Liquid crystal (LC)-based sensors fulfill these requirements due to their chemical diversity, inherent self-assembly potential, and reversible molecular order, resulting in tunable stimuliresponsive soft materials. Sensing platforms utilizing thermotropic uniaxial systems-nematic and smectic-that exploit not only interfacial phenomena, but also changes in the LC bulk, are demonstrated. Special focus is given to the different interaction mechanisms and tuned selectivity toward gas and VOC analytes. Furthermore, the different experimental methods used to transduce the presence of chemical analytes into macroscopic signals are discussed and detailed examples are provided. Future perspectives and trends in the field, in particular the opportunities for LC-based advanced materials in artificial olfaction, are also discussed.

Simultaneous Detection of Multiple Tumor Markers in Blood by Functional Liquid Crystal Sensors Assisted with Target-Induced Dissociation of Aptamer

Multiplex detection of tumor markers in blood with high specificity and high sensitivity is critical to cancer diagnosis, treatment, and prognosis. Herein, we demonstrate a strategy for simultaneous detection of multiple tumor markers in blood by functional liquid crystal (LC) sensors assisted with target-induced dissociation (TID) of an aptamer for the first time. Magnetic beads (MBs) coated with an aptamer (apt1) are employed to specifically capture target proteins in blood. After incubation of the obtained protein-coated MBs with duplexes of another aptamer (apt2) and signal DNA, sandwich complexes of apt1/protein/apt2 are formed on the MBs due to specific recognition of target proteins by apt2, which induces release of signal DNA into the aqueous solution. Subsequently, signal DNA is specifically recognized by highly sensitive DNA-laden LC sensors. Using this strategy, a 3D printed optical cell was employed to enable simultaneous detection of multiple tumor markers such as carcinoembryonic antigen (CEA), alpha-fetoprotein (AFP), and prostate specific antigen (PSA) with high specificity and high sensitivity. Overall, this effective and low-cost multiplex approach takes advantage of the easy separation of MBs, high specificity of aptamer-based recognition, and high sensitivity of functional LC sensors. Plus, it offers a performance that is competitive to that of commercial ELISA kits without potential interference from hemolysis, which makes it very promising in multiplex detection of tumor markers in clinical applications.

Application and Technique of Liquid Crystal-Based Biosensors

Liquid crystal biosensors are based on changes in the orientation of liquid crystal molecules induced by specific bonding events of biomolecules. These biosensors are expected to serve as a promising system to detect biomolecules, biomolecular activity, and even small chemical molecules because they are inexpensive, sensitive, simple, effective, and portable. Herein, we introduce the principle and fabrication of liquid crystal biosensors and review the research progress in signal-amplified technology for liquid crystal sensing and its application in the detection of viruses, bacteria, proteins, nucleic acids, and small chemical molecules. In addition, the current theoretical and practical issues related to liquid crystal biosensors were investigated.

Detection of Biomarkers in Blood Using Liquid Crystals Assisted with Aptamer-Target Recognition Triggered in Situ Rolling Circle Amplification on Magnetic Beads

Detection of biomarkers in body fluids is critical to both diagnosing the life-threatening diseases and optimizing therapeutic interventions. We herein report use of liquid crystals (LCs) to detect biomarkers in blood with high sensitivity and specificity by employing in situ rolling circle amplification (RCA) on magnetic beads (MBs). Specific recognition of cancer biomarkers, such as platelet derived growth factor BB (PDGF-BB) and adenosine, by aptamers leads to formation of a nucleic acid circle on MBs preassembled with ligation DNA, linear padlock DNA, and aptamers, thereby triggering in situ RCA. LCs change from dark to bright appearance after the in situ RCA products being transferred onto the LC interface decorated with octadecy trimethylammonium bromide (OTAB), which is particularly sensitive to the amplified DNA on MBs. Overall, this label-free approach takes advantages of high specificity of aptamer-based assay, efficient enrichment of signaling molecules on MBs, remarkable DNA elongation performance of the RCA reaction, and high sensitivity of LC-based assay. It successfully eliminates the matrix interference on the LC-based sensors and thus achieves at least 4 orders of magnitude improvement in sensitivity for detection of biomarkers compared to other LC-based sensors. In addition, performance of the developed sensor is comparable to that of the commercial ones. Thus, this study provides a simple, powerful, and promising approach to facilitate highly sensitive, specific, and label-free detection of biomarkers in body fluids.

Detection of sulfadimethoxine using optical images of liquid crystals

A label-free method for sulfadimethoxine (SDM) detection using an aptamer-based liquid crystal biosensor is developed. The sensor probe is fabricated by immobilizing amine-functionalized aptamers onto the glass slide decorating mixed self-assembled layers of triethoxysilylbutyraldehyde (TEA) and N,N-dimethyl-n-octadecyl-3-aminopropyltrimethoxysilylchloride (DMOAP). Liquid crystals (LCs) are supported on the surface and serve as response elements, which assume the homeotropic alignment and cause a dark optical appearance under crossed polarizers. In the presence of SDM, the formation of SDM-aptamer compounds induces a notable change in the topographical structure of the surface, which disturbs the original homeotropic orientation of LCs and results in a bright optical appearance. A detection limit of 10 μg L-1 is obtained, which is far lower than the maximum residue limit (100 μg L-1 in China). This facile method shows good specificity for SDM detection and may have great potential for detecting other small molecules.

Fiber Mach-Zehnder-interferometer-based liquid crystal biosensor for detecting enzymatic reactions of penicillinase

A novel, to the best of our knowledge, liquid crystal (LC) biosensor, based on an optical fiber Mach-Zehnder interferometer (MZI), is proposed. The proposed optical fiber MZI consists of two single-mode fibers and a tapered photonic crystal fiber (PCF). The PCF is coated with 4^'-pentyl-biphenyl-4-carboxylic acid (PBA)-doped 4-cyano-4^'-pentylbiphenyl (5CB). Being a pH-sensitive material, PBA can manipulate LC molecules to different orientations according to their pH values. When the orientation of LC molecules changes with varying pH, the effective refractive index of the cladding modes also is accordingly affected. Enzymatic reactions of penicillinase can release H⁺, which causes the decrease of the pH. Therefore, the enzymatic reactions of penicillinase can be sensed by monitoring the peak shift in the interference spectrum. The effects of the tapered diameter on the sensitivity of the sensor were experimentally investigated as well.

Thermotropic Liquid Crystal-Assisted Chemical and Biological Sensors

In this review article, we analyze recent progress in the application of liquid crystal-assisted advanced functional materials for sensing biological and chemical analytes. Multiple research groups demonstrate substantial interest in liquid crystal (LC) sensing platforms, generating an increasing number of scientific articles. We review trends in implementing LC sensing techniques and identify common problems related to the stability and reliability of the sensing materials as well as to experimental set-ups. Finally, we suggest possible means of bridging scientific findings to viable and attractive LC sensor platforms.

Liquid crystals based sensing platform-technological aspects

In bulk phase, liquid crystalline molecules are organized due to non-covalent interactions and due to delicate nature of the present forces; this organization can easily be disrupted by any small external stimuli. This delicate nature of force balance in liquid crystals organization forms the basis of Liquid-crystals based sensing scheme which has been exploited by many researchers for the optical visualization and sensing of many biological interactions as well as detection of number of analytes. In this review, we present not only an overview of the state of the art in liquid crystals based sensing scheme but also highlight its limitations. The approaches described below revolve around possibilities and limitations of key components of such sensing platform including bottom substrates, alignments layers, nature and type of liquid crystals, sensing compartments, various interfaces etc. This review also highlights potential materials to not only improve performance of the sensing scheme but also to bridge the gap between science and technology of liquid crystals based sensing scheme.

Liquid crystals as optical amplifiers for bacterial detection

Interactions of bacteria with target molecules (e.g. antibiotics) or other microorganisms are of growing interest. The first barrier for targeting gram-negative bacteria is layer of a Lipopolysaccharides (LPS). Liquid crystal (LC) based sensors covered with LPS monolayers, as presented in this study, offer a simple model to study and make use of this type of interface for detection and screening. This work describes in detail the production and application of such sensors based on three different LPS that have been investigated regarding their potential to serve as sensing layer to detect bacteria. The LPS O127:B8 in combination with a LC based sensor was identified to be most useful as biomimetic sensing surface. This LPS/LC combination interacts with three different bacteria species, one gram-positive and two gram-negative species, allowing the detection of bacterial presence regardless from their viability. It could be shown that even very low bacterial cell numbers (minimum 500 cell ml(-1)) could be detected within minutes (maximum 15 min). The readout mechanism is the adsorption of bacterial entities on surface bond LPS molecules with the LC serving as an optical amplifier.

A cationic surfactant-decorated liquid crystal sensing platform for simple and sensitive detection of acetylcholinesterase and its inhibitor

In this paper, construction of the liquid crystal (LC)-based sensing platform for simple and sensitive detection of acetylcholinesterase (AChE) and its inhibitor using a cationic surfactant-decorated LC interface was demonstrated. A change of the optical images of LCs from bright to dark appearance was observed when the cationic surfactant, myristoylcholine chloride (Myr), was transferred onto the aqueous/LC interface, due to the formation of a stable surfactant monolayer at the interface. A dark-to-bright change of the optical appearance was then observed when AChE was transferred onto the Myr-decorated LC interface. The sensitivity of this new type of LC-based sensor is 3 orders of magnitude higher in the serum albumin solution than that only in the buffer solution. Noteworthy is that the AChE LC sensor shows a very high sensitivity for the detection of the enzyme inhibitor, which is around 1 fM. The constructed low-cost LC-based sensor is quite simple and convenient, showing high promise for label-free detection of AChE and its inhibitors.