Ultrasensitive enzyme-free electrochemical immunoassay for free thyroxine based on three dimensionally ordered macroporous chitosan–Au nanoparticles hybrid film

New Au/chitosan nanocomposite modified carbon paste sensor for voltammetric detection of nicotine

A profoundly touchy voltammetric sensor for detection of nicotine (NIC) in urine and tobacco specimens has been developed in light of the boosted electrochemical response of NIC at gold and chitosan nanocomposite modified carbon paste electrode (ACMCPE). Material characterization techniques Scanning Electron Microscope and Energy Dispersive X-ray (SEM & EDX) were utilized to describe the ACMCPE surface material. The impedance spectroscopy technique (EIS), cyclic voltammetry (CV), chronoamperometry (CA), and differential pulse voltammetry (DPV) were employed to explore the electrochemical sensing of NIC at ACMCPE. The created sensor exhibits an exceptional electrochemical sensitivity to NIC in a universal Britton-Robinson (B-R) buffer solution with a pH range of 2.0 to 8.0. The sensor shows a linear response over NIC concentration ranges of 4.0-320.0 µM, with the detection limit (LOD) of 7.6 µM. The prepared sensor has been shown to be exceptionally viable in detecting NIC with amazing selectivity and reproducibility. We suggest it as a trustworthy and useful electrochemical sensor for NIC location.

The Applications of Electrochemical Immunosensors in the Detection of Disease Biomarkers: A Review

Disease-related biomarkers may serve as indicators of human disease. The clinical diagnosis of diseases may largely benefit from timely and accurate detection of biomarkers, which has been the subject of extensive investigations. Due to the specificity of antibody and antigen recognition, electrochemical immunosensors can accurately detect multiple disease biomarkers, including proteins, antigens, and enzymes. This review deals with the fundamentals and types of electrochemical immunosensors. The electrochemical immunosensors are developed using three different catalysts: redox couples, typical biological enzymes, and nanomimetic enzymes. This review also focuses on the applications of those immunosensors in the detection of cancer, Alzheimer's disease, novel coronavirus pneumonia and other diseases. Finally, the future trends in electrochemical immunosensors are addressed in terms of achieving lower detection limits, improving electrode modification capabilities and developing composite functional materials.

Preparation of Carbon nanotubes and Polyhedral oligomeric-Reinforced Molecularly Imprinted Polymer Composites for Drug Delivery of Gallic acid

In this paper, an enhanced imprinting effect of utilizing single wall carbon nanotubes (SWCNT) and polyhedral oligomeric silsesquioxanes (POSS) was suggested to improve drug delivery. The combination of 1-butyl-3-methylimidazoliumtetrafluoroborate ([BMIM]BF₄), tetrahydrofuran (THF) and choline chloride-ethylene glycol (ChCl / EG) were used as a ternary porogen to prepare molecularly imprinted polymer (MIPs) doped with SWCNT and POSS. In the presence of gallic acid (GAL), 4-vinylpyridine (4-VP) and ethylene glycol dimethacrylate (EDMA) was functional monomer and crosslinker, respectively. The structure and morphological parameters of the MIP composite, such as surface area and pore size distribution, were also measured. In the studies of in vitro releases, superior controlled release characteristics can be achieved due to the enhanced imprinting effect of the MIPs doped with POSS and SWCNT. In vivo release studies showed that the POSS-SWCNT MIP had the maximum plasma concentration after 4 hours. Compared with the control MIPs and NIP, the POSS-SWCNT MIP displayed a maximum AUC_0-9 of 544.73 (ng h mL^-1), while only 327.48, 212.91, 230.35 and 275.13 (ng h mL^-1) for the POSS MIP, SWCNT MIP, MIP and POSS-SWCNT NIP, respectively.

An electrochemical aptasensor for the milk allergen β-lactoglobulin detection based on a target-induced nicking site reconstruction strategy

Food allergy is an immune system reaction to a particular food, milk being the most common one. β-Lactoglobulin (β-Lg) is the main ingredient of milk protein and the main cause of infant milk allergy. On such an occasion, the determination of β-Lg is very important and the electrochemical sensors are a good alternative for this purpose since they are sensitive, selective and inexpensive. In this work, an electrochemical aptasensor was fabricated for the quantitative detection of β-Lg in hypoallergenic formula (HF) milk. A tri-functional hairpin (HP) was designed, which was composed of an aptamer sequence, a nicking site and a DNA sequence (T1). In the absence of β-Lg, the aptamer part hybridized with T1 to form a stable stem-loop structure. However, in the presence of β-Lg, the capture of the aptamer sequence towards β-Lg caused the reconstruction of HP and thus the nicking sites were exposed. Then, the nicking enzyme was activated and T1 could be released, which bound with the end of the hairpin 1-methylene blue (HP1-MB)/HP2-MB conjugation on the Au nanoparticle (AuNP) modified electrode surface. Thus, the insulating property of the electrode was enhanced and the current response of MB decreased, which built the quantitative basis for β-Lg detection. In this way, the proposed aptasensor exhibited a wide linear range of 0.01-100 ng mL^-1 and a low detection limit of 5.7 pg mL^-1. This aptasensor also displayed high selectivity, reproducibility and stability, and became a promising platform for β-Lg detection in real food samples.

Characterization and Electrical Properties of PVA Films with Self-Assembled Chitosan-AuNPs/SWCNT-COOH Nanostructures

Nanostructured films with electrical conductivity in the semiconductor region were prepared in a polymeric matrix of poly(vinyl alcohol) (PVA) with nanostructures of chitosan-gold nanoparticles (AuNPs)/single-wall carbon nanotubes carboxylic acid functionalized (SWCNT-COOH) (chitosan-AuNPs/SWCNT-COOH) self-assembled. Dispersion light scattering (DLS) was used to determine the average particle sizes of chitosan-AuNPs, z-average particle size (Dz) and number average particle size (Dn), and the formation of crystalline domains of AuNPs was demonstrated by X-ray diffraction (XRD) patterns and observed by means of transmission electron microscopy (TEM). The electrostatic interaction was verified by Fourier transform infrared spectroscopy (FTIR). The electrical conductivity of PVA/chitosan-AuNPs/SWCNT-COOH was determined by the four-point technique and photocurrent. The calculated Dn values of the chitosan-AuNPs decreased as the concentration of gold (III) chloride trihydrate (HAuCl₄·3H₂O) increased: the concentrations of 0.4 and 1.3 mM were 209 and 90 nm, respectively. Average crystal size (L) and number average size (D) of the AuNPs were calculated in the range of 13 to 24 nm. Electrical conductivity of PVA/chitosan-AuNPs/SWCNT-COOH films was 3.7 × 10^-5 σ/cm determined by the four-point technique and 6.5 × 10^-4 σ/cm by photocurrent for the SWCNT-COOH concentration of 0.5 wt.% and HAuCl₄·3H₂O concentration of 0.4 mM. In this investigation, the protonation of the amine group of chitosan is fundamental to prepare PVA films with nanostructures of self-assembled chitosan-AuNPs/SWCNT-COOH.

Simple and rapid monitoring of doxorubicin using streptavidin-modified microparticle-based time-resolved fluorescence immunoassay

Developing a simple analytical method suitable for therapeutic drug monitoring in a clinical setting is key to establishing guidelines on accurate dose administration and the advancement of precision medicine. We devised a simple rapid analytical method through the combination of streptavidin-modified microparticles and a time-resolved fluorescence immunoassay for therapeutic drug monitoring. The analytical performance of this method was investigated and validated using clinical samples. By determination of doxorubicin concentration, the proposed assay has shown a satisfactory linear range of detection (3.8-3000 ng mL-1) with a limit of detection of 3.8 ng mL-1 and an IC50 of 903.9 ng mL-1. The intra and inter-assay coefficients of variation were 4.12-5.72% and 5.48-6.91%, respectively, and the recovery was acceptable. The applicability of the proposed assay was assessed by comparing the determined results with those measured by LC-MS/MS, presenting a satisfactory correlation (R 2 = 0.9868). The proposed assay, which shows satisfactory analytical performance, has great potential for application in the field of TDM in the future.

Sensors Based on Bio and Biomimetic Receptors in Medical Diagnostic, Environment, and Food Analysis

Analytical chemistry is now developing mainly in two areas: automation and the creation of complexes that allow, on the one hand, for simultaneously analyzing a large number of samples without the participation of an operator, and on the other, the development of portable miniature devices for personalized medicine and the monitoring of a human habitat. The sensor devices, the great majority of which are biosensors and chemical sensors, perform the role of the latter. That last line is considered in the proposed review. Attention is paid to transducers, receptors, techniques of immobilization of the receptor layer on the transducer surface, processes of signal generation and detection, and methods for increasing sensitivity and accuracy. The features of sensors based on synthetic receptors and additional components (aptamers, molecular imprinted polymers, biomimetics) are discussed. Examples of bio- and chemical sensors' application are given. Miniaturization paths, new power supply means, and wearable and printed sensors are described. Progress in this area opens a revolutionary era in the development of methods of on-site and in-situ monitoring, that is, paving the way from the "test-tube to the smartphone".

An ultrasensitive sandwich type electrochemiluminescence immunosensor for triiodothyronine detection using silver nanoparticle-decorated graphene oxide as a nanocarrier

An ultrasensitive electrochemiluminescence (ECL) immunosensor was constructed to detect 3,3',5-triiodothyronine (T3). The system employed T3-conjugated, silver nanoparticle-decorated carboxylic graphene oxide (Ag@fGO-T3) as a carrier and anti-T3 antibody-tris(2,2'-bipyridyl) ruthenium(II) (Ru(bpy)3(2+)) as a probe. The Ag@fGO-T3 and Ru(bpy)3(2+) complex could be mobilized rapidly to the anode in the reaction chamber through electrophoresis. The fGO is reduced electrochemically at the electrode, and the electrons could transfer from an anode to the Ru(bpy)3(2+). The complex is excited at the electrode and an ECL signal is produced upon reacting with tripropylamine (TPrA). Because of its large surface area and excellent conductivity, Ag@fGO could enhance ECL signal significantly in the system. Quantitative measurement of T3 could be achieved in the range from 0.1 pg/mL to 0.8 ng/mL with a detection limit of 0.05 pg/mL. In addition, the novel immunosensor showed good specificity in the presence of serum, indicating its high potential in clinical use.

An electrochemical sensing strategy based on a three dimensional ordered macroporous polyaniline–platinum platform and a mercury(ii) ion-mediated DNAzyme functionalized nanolabel

An Hg²⁺-switched DNA biosensor using a three dimensional ordered macroporous polyaniline–platinum platform and a G-rich sequence recognition probe was developed, with the detection limit of 8.7 × 10⁻¹⁴ M.

Signal-enhanced electrochemical immunosensor for CD36 based on cascade catalysis of a GOx labeled Prussian blue functionalized Ceria nanohybrid

A novel electrochemical immunosensor was constructed for human scavenger receptor B type CD36 with glucose oxidase labeled Prussian blue nanoparticles functionalized ceria nanoparticles as the signal enhancer.

Dual amplified electrochemical immunosensor for highly sensitive detection of Pantoea stewartii sbusp. stewartii

Accurate and highly sensitive detection of Pantoea stewartii sbusp. stewartii-NCPPB 449 (PSS) is urgently required for international shipments due to tremendous agricultural economic losses. Herein, a dual amplified electrochemical sandwich immunosensor for PSS detection was developed, utilizing the good specificity and low cost of electrochemical immunoassay, the favorable conductivity and large specific surface area of gold nanoparticles (Au NPs), and the excellent catalytic ability of and horseradish peroxidase (HRP). A linear curve between current response and PSS concentration was established, and the limit of detection (LOD) was 7.8 × 10(3) cfu/mL, which is 20 times lower than that for conventional enzyme-linked immunosorbent assay (ELISA). This strategy is a useful approach for the highly sensitive detection of plant pathogenic bacterium.

Enzymatic amplification detection of peanut allergen Ara h1 using a stem-loop DNA biosensor modified with a chitosan-mutiwalled carbon nanotube nanocomposite and spongy gold film

In this paper, a highly sensitive biosensor was constructed for peanut allergen Ara h1 detection. The biosensor was constructed by coating a glassy carbon electrode with a chitosan-mutiwalled carbon nanotube nanocomposite and then adding a spongy gold film via electro-deposition to increase the effective area. The probe switched from an "on" to an "off" state in the presence of target DNA, which detached biotin from the electrode surface. This also detached streptavidin-horseradish peroxidase (HRP-SA), which was bound to the electrode via specific interaction with biotin. The HRP-SA catalyzed chemical oxidation of hydroquinone by H2O2 to form benzoquinone, and when it was detached, electrochemical reduction of the signal of benzoquinone could be used to monitor DNA hybridization via chronoamperometry. Under optimum conditions, a wide dynamic detection range (3.91 × 10(-17)-1.25 × 10(-15) mol L(-1)) and a low detection limit (1.3 × 10(-17) mol L(-1)) were achieved for the complementary sequence. Furthermore, the DNA biosensor exhibited an excellent ability to discriminate between a complementary target and a one-base mismatch or non-complementary sequence. The sensor was successfully applied to Ara h1 analysis in peanuts.