Highly-sensitive liquid crystal biosensor based on DNA dendrimers-mediated optical reorientation

A cost-effective label-free biosensor for rapid detection of multiple viral respiratory infections base on liquid crystals: Fabrication and modeling

The high transmission rate and incurability of recurrent Herpes Simplex Virus (HSV) infection require an accurate and fast detection approach for its efficient prevention. In an attempt to find a novel sensitive and simple optical diagnostic technique which enables on-spot testing, here we developed label-free biosensors based on E7 nematic liquid crystals (LCs) for specific detection of HSV DNA. For this purpose, homeotropically oriented LCs as smart materials are spread on the textile grid to make their both upper and lower surfaces be in contact with ambient air. HSV DNA of concentration between 1.4 nM and 5.5 nM is added to the platform, and DNA elution buffer is used as a control. Then, the reorientation of LCs occurs due to the coupling of electrical dipoles between LCs and DNA molecules. Creating a unique pattern that is projected onto CCD by putting the sample in a cross-polarizer and using white light. To model the LC's director distribution, LC's free energy equation is solved using the variational method and finite difference method (FDM). Overall, our LC-based sensor is a user-friendly, cost-effective, highly sensitive, and fast way for specific detection of HSV without the need for experts and expensive equipment.

Liquid crystal based sensor for antimony ions detection using poly-adenine oligonucleotides

Antimony is highly toxic and a key water pollutant, which needs to be monitored closely. To date, however, most analytical methods for antimony detection are quite limited because they are complicated, expensive, and not suitable for real-time monitoring of antimony. In this study, a label-free and rapid method for antimony ions (Sb3+) detection is developed based on liquid crystals and a 10-mer poly-adenine oligonucleotide as a specific recognition probe for the first time. The working principle is based on the binding of the oligonucleotide to Sb3+, which weakens the interaction between the oligonucleotide and cationic surfactants. As a result, the event induces a planar-to-homeotropic orientational change of liquid crystals and a bright-to-dark optical change under crossed polars. This liquid crystal-based optical sensor exhibits a rapid response to Sb3+ in 10 s, a detection range between 20 nM and 5 μM, and a detection limit at 6.7 nM calculated from 10-mins assay time. It also shows good selectivity against other metal ions including Ag+, Cd2+, Cu2+, Fe3+, K+, Mg2+, Mn2+, Na+, Pb2+, and Zn2+. Moreover, this system can be used to detect Sb3+ in aqueous solutions with different pH or ionic strengths. This simple, fast, and low-cost liquid crystal-based sensing approach with high sensitivity and selectivity has a high potential for detecting Sb3+ in natural environments and industrial wastewater.

Harnessing Liquid Crystal Sensors for High-Throughput Real-Time Detection of Structural Changes in Lysozyme during Refolding Processes

Despite the rapid advances in process analytical technology, the assessment of protein refolding efficiency has largely relied on off-line protein-specific assays and/or chromatographic procedures such as reversed-phase high-performance liquid chromatography and size exclusion chromatography. Due to the inherent time gap pertaining to traditional methods, exploring optimum refolding conditions for many recombinant proteins, often expressed as insoluble inclusion bodies, has proven challenging. The present study describes a novel protein refolding sensor that utilizes liquid crystals (LCs) to discriminate varying protein structures during unfolding and refolding. An LC layer containing 4-cyano-4'-pentylbiphenyl (5CB) intercalated with 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) is used as a sensing platform, and its proof-of-concept performance is demonstrated using lysozyme as a model protein. As proteins unfold or refold, a local charge fluctuation at their surfaces modulates their interaction with zwitterionic phospholipid DOPE. This alters the alignment of DOPE molecules at the aqueous/LC interface, affecting the orientational ordering of bulk LC (i.e., homeotropic to planar for refolding and planar to homeotropic for unfolding). Differential polarized optical microscope images of the LC layer are subsequently generated, whose brightness directly linked to conformational changes of lysozyme molecules is quantified by gray scale analysis. Importantly, our LC-based refolding sensor is compatible with diverse refolding milieus for real-time analysis of lysozyme refolding and thus likely to facilitate the refolding studies of many proteins, especially those lacking a method to determine structure-dependent biological activity.

Liquid crystal-assisted optical biosensor for early-stage diagnosis of mammary glands using HER-2

Breast cancer (BC) is one of the most commonly diagnosed cancers and the second leading cause of cancer mortality among women around the world. The purpose of this study is to present a non-labeled liquid crystal (LC) biosensor, based on the inherent feature of nematic LCs, for the evaluation of BC using the human epidermal growth factor receptor-2 (HER-2) biomarker. The mechanism of this sensing is supported by surface modification with dimethyloctadecyl [3-(trimethoxysilyl) propyl] ammonium chloride (DMOAP) encouraging the long alkyl chains that induce a homeotropic orientation of the LC molecules at the interface. To enhance the binding efficacy of more HER-2 antibody (Ab) on LC aligning agents, a simple ultraviolet radiation-assisted method was also used to increase functional groups on the DMOAP coated slides, thereby improving binding affinity and efficiency onto HER-2 Abs. The designed biosensor makes use of the specific binding of HER-2 protein to HER-2 Ab and disruption of the orientation of LCs. This orientation change leads to a transition of the optical appearance from dark to birefringent, enabling the detection of HER-2. This novel biosensor exhibits a linear optical response to HER-2 concentration in the wide dynamic range of 10^-6-10² ng/mL, with an ultra-low detection limit of 1 fg/mL. As a proof of concept, the designed LC biosensor was successfully investigated for the quantification of HER-2 protein in patients suffering from BC. Owing to the sensitivity, selectivity, and label-free detection, this biosensor may amplify the application of LC-based biosensors for the detection of most types of cancers.

Liquid Crystal Biosensors: Principles, Structure and Applications

Liquid crystals (LCs) have been widely used as sensitive elements to construct LC biosensors based on the principle that specific bonding events between biomolecules can affect the orientation of LC molecules. On the basis of the sensing interface of LC molecules, LC biosensors can be classified into three types: LC-solid interface sensing platforms, LC-aqueous interface sensing platforms, and LC-droplet interface sensing platforms. In addition, as a signal amplification method, the combination of LCs and whispering gallery mode (WGM) optical microcavities can provide higher detection sensitivity due to the extremely high quality factor and the small mode volume of the WGM optical microcavity, which enhances the interaction between the light field and biotargets. In this review, we present an overview of the basic principles, the structure, and the applications of LC biosensors. We discuss the important properties of LC and the principle of LC biosensors. The different geometries of LCs in the biosensing systems as well as their applications in the biological detection are then described. The fabrication and the application of the LC-based WGM microcavity optofluidic sensor in the biological detection are also introduced. Finally, challenges and potential research opportunities in the development of LC-based biosensors are discussed.

State-of-the-Art Development in Liquid Crystal Biochemical Sensors

As an emerging stimuli-responsive material, liquid crystal (LC) has attracted great attentions beyond display applications, especially in the area of biochemical sensors. Its high sensitivity and fast response to various biological or chemical analytes make it possible to fabricate a simple, real-time, label-free, and cost-effective LC-based detection platform. Advancements have been achieved in the development of LC-based sensors, both in fundamental research and practical applications. This paper briefly reviews the state-of-the-art research on LC sensors in the biochemical field, from basic properties of LC material to the detection mechanisms of LC sensors that are categorized into LC-solid, LC-aqueous, and LC droplet platforms. In addition, various analytes detected by LCs are presented as a proof of the application value, including metal ions, nucleic acids, proteins, glucose, and some toxic chemical substances. Furthermore, a machine-learning-assisted LC sensing platform is realized to provide a foundation for device intelligence and automatization. It is believed that a portable, convenient, and user-friendly LC-based biochemical sensing device will be achieved in the future.

Chiral nematic liquid crystal droplets as a basis for sensor systems

For a series of phospholipid coated calamitic nematic liquid crystal droplets (5CB, 6CB, 7CB, E7 and MLC7023) of diameter ∼18 μm, the addition of chiral dopant leaves the sign of surface anchoring unchanged. Herein we report that for these chiral nematic droplets an analyte induced transition from a Frank-Pryce structure (with planar anchoring) to a nested-cup structure (with perpendicular anchoring) is accompanied by changes in the intensity of reflected light. We propose this system as both a general scheme for understanding director fields in chiral nematic liquid crystal droplets with perpendicular anchoring and as an ideal candidate to be utilised as the basis for developing cheap, single use LC-based sensor devices.

Partial induced reorientation of 5CB in a liquid crystal microarray and a signal-on sensing assay for the detection of aflatoxin B1

Herein, a signal-on liquid crystal microarray (LCM) sensor is designed for the first time with a micro-spectral optical sensing signal. Depending on the change of the orientation of the LC molecules in the LCM films and the intensity of the spectral peaks of the PhCs, the signal-on LCM biosensor achieves the detection of AFB1 and the Partial Response Mechanism (PSM) of the LCM films is discovered.

Development and Application of Liquid Crystals as Stimuli-Responsive Sensors

This focused review presents various approaches or formats in which liquid crystals (LCs) have been used as stimuli-responsive sensors. In these sensors, the LC molecules adopt some well-defined arrangement based on the sensor composition and the chemistry of the system. The sensor usually consists of a molecule or functionality in the system that engages in some form of specific interaction with the analyte of interest. The presence of analyte brings about the specific interaction, which then triggers an orientational transition of the LC molecules, which is optically discernible via a polarized optical image that shows up as dark or bright, depending on the orientation of the LC molecules in the system (usually a homeotropic or planar arrangement). The various applications of LCs as biosensors for glucose, protein and peptide detection, biomarkers, drug molecules and metabolites are extensively reviewed. The review also presents applications of LC-based sensors in the detection of heavy metals, anionic species, gases, volatile organic compounds (VOCs), toxic substances and in pH monitoring. Additionally discussed are the various ways in which LCs have been used in the field of material science. Specific attention has been given to the sensing mechanism of each sensor and it is important to note that in all cases, LC-based sensing involves some form of orientational transition of the LC molecules in the presence of a given analyte. Finally, the review concludes by giving future perspectives on LC-based sensors.

A portable digital optical kanamycin sensor developed by surface-anchored liquid crystal droplets

There is an increase in demand to develop simple, convenient, and low-cost approaches for rapid and label-free detection of antibiotics. Herein, we propose a new principle for the detection of kanamycin using the surface-anchored liquid crystal (LC) droplets. The optical images of the LC droplets uniformly change from four-clover, uniformly dark, and dark cross appearance gradually with the increase of surfactant concentration. The detection of kanamycin is fulfilled with the aid of a cationic surfactant cetyltrimethylammonium bromide (CTAB) and a kanamycin aptamer. The LC droplets show uniformly dark appearance and four-clover appearance in the presence of the aqueous solutions of CTAB and CTAB/aptamer complex, respectively. However, the specific binding of kanamycin to its aptamer can release the CTAB, which induces the uniformly dark appearance of the LC droplets. A portable device is built to measure the optical luminance of the LC droplets. This system can detect kanamycin with a concentration below 0.1 ng/mL (~0.17 nM) and also allows the detection of kanamycin in real samples such as milk and honey. Therefore, it is very promising in the development of new types of LC-based sensors by the surface-anchored LC droplets assisted with a portable optical device.

Applications of Microfluidics in Liquid Crystal-Based Biosensors

Liquid crystals (LCs) with stimuli-responsive configuration transition and optical anisotropic properties have attracted enormous interest in the development of simple and label-free biosensors. The combination of microfluidics and the LCs offers great advantages over traditional LC-based biosensors including small sample consumption, fast analysis and low cost. Moreover, microfluidic techniques provide a promising tool to fabricate uniform and reproducible LC-based sensing platforms. In this review, we emphasize the recent development of microfluidics in the fabrication and integration of LC-based biosensors, including LC planar sensing platforms and LC droplets. Fabrication and integration of LC-based planar platforms with microfluidics for biosensing applications are first introduced. The generation and entrapment of monodisperse LC droplets with different microfluidic structures, as well as their applications in the detection of chemical and biological species, are then summarized. Finally, the challenges and future perspectives of the development of LC-based microfluidic biosensors are proposed. This review will promote the understanding of microfluidic techniques in LC-based biosensors and facilitate the development of LC-based microfluidic biosensing devices with high performance.

Catalytic hairpin DNA assembly-based chemiluminescent assay for the detection of short SARS-CoV-2 target cDNA

Colorimetric sensors are recognized as a promising means for target molecule detection as they provide rapid, cost-effective, and facile sensing visible to the naked eye. Challenges remain though in terms of their detection sensitivity and specificity for short-length target genes. Herein, we demonstrate the successful combination of the catalytic hairpin DNA assembly (CHA) approach with enzyme-linked immunosorbent assay (ELISA)-mimicking techniques for a simple, sensitive, and sequence-specific colorimetric assay to detect short SARS-CoV-2 target cDNA. In the developed CHA-based chemiluminescent assay, a low concentration of target cDNA is continuously recycled to amplify dimeric DNA probes from two biotinylated hairpin DNA until the hairpin DNA is completely consumed. The dimeric DNA probes are effectively immobilized in a neutravidin-coated microplate well and then capture neutravidin-conjugated horseradish peroxidase via biotin-neutravidin interactions, resulting in a sensitive and selective colorless-to-blue color change. The developed sensing system exhibits a high sensitivity with a detection limit of ~1 nM for target cDNA as well as the ability to precisely distinguish a single-base mismatched mutant gene within 2 h. As the proposed system does not require complex protocols or expensive equipment to amplify target cDNA, it has the potential to be utilized as a powerful tool to improve the detection sensitivity of target genes for clinical diagnostics with colorimetric detection.

Liquid crystal-amplified optofluidic biosensor for ultra-highly sensitive and stable protein assay

Protein assays show great importance in medical research and disease diagnoses. Liquid crystals (LCs), as a branch of sensitive materials, offer promising applicability in the field of biosensing. Herein, we developed an ultrasensitive biosensor for the detection of low-concentration protein molecules, employing LC-amplified optofluidic resonators. In this design, the orientation of LCs was disturbed by immobilized protein molecules through the reduction of the vertical anchoring force from the alignment layer. A biosensing platform based on the whispering-gallery mode (WGM) from the LC-amplified optofluidic resonator was developed and explored, in which the spectral wavelength shift was monitored as the sensing parameter. The microbubble structure provided a stable and reliable WGM resonator with a high Q factor for LCs. It is demonstrated that the wall thickness of the microbubble played a key role in enhancing the sensitivity of the LC-amplified WGM microcavity. It is also found that protein molecules coated on the internal surface of microbubble led to their interactions with laser beams and the orientation transition of LCs. Both effects amplified the target information and triggered a sensitive wavelength shift in WGM spectra. A detection limit of 1 fM for bovine serum albumin (BSA) was achieved to demonstrate the high-sensitivity of our sensing platform in protein assays. Compared to the detection using a conventional polarized optical microscope (POM), the sensitivity was improved by seven orders of magnitude. Furthermore, multiple types of proteins and specific biosensing were also investigated to verify the potential of LC-amplified optofluidic resonators in the biomolecular detection. Our studies indicate that LC-amplified optofluidic resonators offer a new solution for the ultrasensitive real-time biosensing and the characterization of biomolecular interactions.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1186/s43074-021-00041-1.

Control of Liquid Crystal Microarray Optical Signals Using a Microspectral Mode Based on Photonic Crystal Structures

Herein, a novel liquid crystal microarray (LCM) film with optical regulation ability is first constructed by combining liquid crystals (LC) and the highly ordered microporous structure of inverse opal photonic crystals (IOPhCs). The LCM films are fabricated by infiltrating LC molecules into the LC polymer with the structure of IOPhCs, and their properties are very different from those without the LC. Interestingly, the optical property of LCM films can be controlled by changing the orientation of LC molecules, which varies with the interfacial force. In combination with polarization images, spectral reflection peak, circular dichroism spectra, potential difference, and fluorescence images of LCM films, the mechanism of this change is investigated. It is found that the exposed basic group of single-stranded DNA is the key to the change of the optical property of LC microarrays. Meanwhile, the optical signals of LC microarrays based on the PhCs provide a novel LC signal mode for an LC sensing system (microspectral signal mode), and it can be recorded by a fiber-optic spectrometer, which is a great improvement on LC sensing signals. Therefore, the LC microarray sensing signal can be used for accurate analysis of targets by the change of the reflection peak intensity of PhCs. When the LC molecules are induced by different aptamers, the LC microarray sensing interface can be further used for the determination of different targets, such as cocaine and Hg²⁺. The research on LCM films is of significant value for the development of LC sensing technology and also shows great application prospects in biochemical sensing fields.

A novel liquid crystal-based aptasensor for ultra-low detection of ochratoxin a using a π-shaped DNA structure: Promising for future on-site detection test strips

Ochratoxin A (OTA) as the most dangerous mycotoxin is produced by Aspergillus Ochraceus and Penicillium verrucosum. OTA can be found in beverages and foodstuffs that induces the teratogenic, nephrotoxic, carcinogenic, and immunosuppressive effects on humans. Hence, developing highly sensitive methods for its detection is of great importance. Herein, a novel aptasensor was designed for the label-free monitoring of the ultra-low OTA levels by a combination of the superiority of aptamers and long-range orientational order of liquid crystals (LCs). The aptasensing strategy was based on the conformational switch of the immobilized π-shaped DNA structure on the glass substrate in presence of the target. A shift in the orientation of LCs from random to homeotropic state led to the apparent alteration of the optical appearance of the aptasensor platform from bright to dark. The LC-based aptasensor especially detects OTA at the ultra-trace level as low as 0.63 aM with comparable selectivity. The aptasensor could detect OTA successfully in the grape juice, coffee, and human serum samples. The LC-based aptasensor paves a way for developing portable and real-time sensing probes with high performance for food safety control and clinical application.

Applications of liquid crystals in biosensing

Liquid crystals (LCs), as a promising branch of highly-sensitive, quick-response, and low-cost materials, are widely applied to the detection of weak external stimuli and have attracted significant attention. Over the past decade, many research groups have been devoted to developing LC-based biosensors due to their self-assembly potential and functional diversity. In this paper, recent investigations on the design and application of LC-based biosensors are reviewed, based on the phenomenon that the orientation of LCs can be directly influenced by the interactions between biomolecules and LC molecules. The sensing principle of LC-based biosensors, as well as their signal detection by probing interfacial interactions, is described to convert, amplify, and quantify the information from targets into optical and electrical parameters. Furthermore, commonly-used LC biosensing targets are introduced, including glucose, proteins, enzymes, nucleic acids, cells, microorganisms, ions, and other micromolecules that are critical to human health. Due to their self-assembly potential, chemical diversity, and high sensitivity, it has been reported that tunable stimuli-responsive LC biosensors show bright perspectives and high superiorities in biological applications. Finally, challenges and future prospects are discussed for the fabrication and application of LC biosensors to both enhance their performance and to realize their promise in the biosensing industry.

Development of liquid crystal biosensor for the detection of amyloid beta-42 levels associated with Alzheimer's disease

This study represents the development of a biosensor which is based on the liquid crystal (LC) orientation as a function of the peptide concentration to detect an amyloid-beta-42 (Aβ42) antibody-antigen binding events. The Aβ42 peptide binds to the Aβ42 antibody forming an immunocomplex which is immobilized on the Dimethyloctadecyl[3-(trimethoxysilyl)propyl] ammonium chloride (DMOAP) coated surface. The disturbed orientation of LCs as a result of the binding of the formed immunocomplex was observed using the polarized optical microscope (POM) as a function of decreasing Aβ42 peptide concentration from 1000 to 1 pg/ml. The concentration, as low as 1 pg/ml of Aβ42 peptide was able to be successfully detected in our system. Apolipoprotein E4 (ApoE4), that specifically bound to the Aβ42 peptide, was added into the system and a remarkable change in reflection spectra of samples was observed with increasing Aβ42 peptide concentration. The concentration of ApoE4 protein was detected in the range of 0.1-30 nM by this system due to the interaction between the two proteins.

Detection of bleomycin and its hydrolase by the cationic surfactant-doped liquid crystal-based sensing platform

Bleomycin (BLM) is a broadly used antibiotic to treat different types of cancer. It can be hydrolyzed by bleomycin hydrolase (BLMH), which eventually influences the anti-tumor efficacy of BLM. Therefore, it is particularly important to detect BLM and BLMH. Herein, we demonstrated highly sensitive detection of BLM and BLMH by a simple and convenient liquid crystal (LC)-based sensing platform for the first time. 5CB (a nematic LC) doped with the cationic surfactant OTAB was working as the sensing platform. When the OTAB-laden 5CB interface was in contact with an aqueous solution of ssDNA, LCs displayed a bright image due to disruption of the arrangement of OTAB monolayers by ssDNA, indicating the planar orientation of LCs at the aqueous/LC interface. When BLM·Fe(II) and ssDNA were both present in the aqueous solution, ssDNA underwent irreversible cleavage, which prevented disruption of the arrangement of OTAB monolayers. Accordingly, LCs showed a dark image, suggesting the homeotropic orientation of LCs at the aqueous/LC interface. However, when BLM·Fe(II) was enzymatically hydrolyzed by BLMH, LCs remained the bright image. This approach showed high sensitivity for the detection of BLM and BLMH with the limits of detection of 0.2 nM and 0.3 ng/mL, respectively. Besides, the detection of BLM and BLMH was successfully achieved in human serum. This method has the advantages of high sensitivity, robust stability, simple operation, low cost, and easy detection through naked eyes, which makes it a potential candidate for applications in clinical analysis.

An ultrasensitive platform for PCB77 detection: New strategy for liquid crystal-based aptasensor fabrication

Polychlorinated biphenyls (PCBs) are considered persistent bio-accumulative toxicants which threats global food safety and environmental health. Traditional analytical techniques for detection of PCBs are time-consuming and they do not satisfy urgent need for rapid and accurate monitoring of these persistent pollutants. Biosensor technology may be promising in this respect. Here we demonstrate a novel liquid crystal (LC)-based aptasensing platform as a promising label-free and rapid biosensor for PCB77 detection. This novel molecular strategy utilize triple-helix molecular conformational switch which is mediated formation of duplex on sensing platform in presence of target. Duplex forming leads to optical change from dark to bright in a liquid crystal based aptasensor. The limit of quantification of the LC-aptasensor to PCB77 is 1.5 × 10^-5 μg/L with comparable selectivity. Besides, we also demonstrated that this system is able to detect PCB77 in tap water, environmental water and milk. This strategy has potential for label-free and portable detection of different targets without any aptamer sequence length restrictions.

Multifunctional DNA dendrimer nanostructures for biomedical applications

DNA nanomaterials have attracted ever-increasing attention over the past decades due to their incomparable programmability and multifunctionality. In particular, DNA dendrimer nanostructures, as a major research focus, have been applied in the fields of biosensing, therapeutics, and protein engineering, benefiting from their highly branched configuration. With the aid of specific recognition probes and inherent signal amplification, DNA dendrimers can achieve ultrasensitive detection of nucleic acids, proteins, cells, and other substances, such as lipopolysaccharides (LPS), adenosine triphosphate (ATP), and exosomes. By virtue of their void-containing structures and biocompatibility, DNA dendrimers can deliver drugs or functional nucleic acids into target cells in chemotherapy, immunotherapy, and gene therapy. Furthermore, DNA dendrimers are being applied in protein engineering for efficient directed evolution of proteins. This review summarizes the main research progress of DNA dendrimers, concerning their assembly methods and biomedical applications as well as the emerging challenges and perspectives for future research.

Application and Technique of Liquid Crystal-Based Biosensors

Liquid crystal biosensors are based on changes in the orientation of liquid crystal molecules induced by specific bonding events of biomolecules. These biosensors are expected to serve as a promising system to detect biomolecules, biomolecular activity, and even small chemical molecules because they are inexpensive, sensitive, simple, effective, and portable. Herein, we introduce the principle and fabrication of liquid crystal biosensors and review the research progress in signal-amplified technology for liquid crystal sensing and its application in the detection of viruses, bacteria, proteins, nucleic acids, and small chemical molecules. In addition, the current theoretical and practical issues related to liquid crystal biosensors were investigated.

Electric-field-assisted signal amplification for label-free liquid-crystal-based detection of biomolecules

The fundamental principle of liquid-crystal (LC)-based biosensing is the sensitive response of LC orientation to external stimuli. Biomolecules such as proteins or DNAs immobilized on the glass substrate of a LC cell are detected through disrupting the LC alignment and, in turn, altering the birefringence, resulting in changes in the optical texture that can be readily observed under a polarizing optical microscope. With an additional weak electric field across a sandwiched LC cell, we demonstrate in this study a novel label-free biodetection technique with amplified signal and improved detection limit. By applying the binarization analysis as the quantitative approach, the increase in the light leakage area in the optical texture of LCs with increasing amount of biomolecules can be quantitated with a bright-area-ratio (BAR)-versus-concentration curve. The reported biosensing technique exploits both the optical and electrical properties of LCs and is potentially applicable to other LC-based rapid screening and bioassays.

Preparation of DNA-functionalized surfaces for simultaneous homeotropic orientation of liquid crystals and optical recognition of analytes: application to the determination of progesterone

The work describes a simplified method for the preparation of liquid crystal (LC) bioassay using DNA-based capture molecules and having lower detection limits. The capture DNA probes of the stem-loop structure were immobilized on the surface of a glass slide. A homeotropic orientation of LC molecules can be obtained with the proper surface coverage of capture DNA probes. In the presence of analytes (specifically shown here for the progesterone as a model analyte), the molecular binding between capture DNA probes and progesterone opens the loop of the capture DNA probes. The opened sequence is then amenable to hybridization with a reporter DNA probe that is immobilized on gold nanoparticles. This changes the surface microstructure, disrupts the orientation of LC molecules, and results in an enhanced optical response, expressed as the average grey value of the images. This new kind of surface treatment for simultaneous recognition of target molecules and homeotropic anchoring of LCs reduces the number of preparation steps and makes the process of LC bioassay easier. This method has a detection limit as low as 0.1 pmol·L^-1 of progesterone. Graphical abstract Schematic presentation of the liquid crystal-based DNA assay. DMOAP: Dimethyloctadecyl[3-(trimethoxysilyl)propyl]ammonium chloride; TEA: Triethoxsilylbutyraldehyde; 5CB: 4-cyano-4'-pentylbiphenyl; P4: progesterone.

Lipid coated liquid crystal droplets for the on-chip detection of antimicrobial peptides

We describe a novel biosensor based on phospholipid-coated nematic liquid crystal (LC) droplets and demonstrate the detection of Smp43, a model antimicrobial peptide (AMP) from the venom of North African scorpion Scorpio maurus palmatus. Mono-disperse lipid-coated LC droplets of diameter 16.7 ± 0.2 μm were generated using PDMS microfluidic devices with a flow-focusing configuration and were the target for AMPs. The droplets were trapped in a bespoke microfluidic trap structure and were simultaneously treated with Smp43 at gradient concentrations in six different chambers. The disruption of the lipid monolayer by the Smp43 was detected (<6 μM) at concentrations well within its biologically active range, indicated by a dramatic change in the appearance of the droplets associated with the transition from a typical radial configuration to a bipolar configuration, which is readily observed by polarizing microscopy. This suggests the system has feasibility as a drug-discovery screening tool. Further, compared to previously reported LC droplet biosensors, this LC droplet biosensor with a lipid coating is more biologically relevant and its ease of use in detecting membrane-related biological processes and interactions has the potential for development as a reliable, low-cost and disposable point of care diagnostic tool.

Investigation of the Assembly Behavior of an Amphiphilic Lipopeptide at the Liquid Crystal-Aqueous Interface

In this article, we designed an amphiphilic lipopeptide molecule, 5(6)-carboxyfluorescein-KKKKKKSKTK-Cys(C₁₂H₂₅)-OMe (FAM-lipopeptide-C12), and studied its assembly behavior at the 4-cyano-4'-pentylbiphenyl (5CB)-aqueous interface. The ordering transitions of liquid crystals (LCs) revealed that FAM-lipopeptide-C12 can assemble at the LC-aqueous interface (both planar and curved interfaces). The assembly can be destroyed by adding trypsin, which catalyzes the hydrolysis of lipopeptides. Fluorescence measurements further confirmed the assembly and deassembly behavior of FAM-lipopeptide-C12 at the LC-aqueous interface. Overall, our work provides a general method for the construction of a biointerface by directly assembling amphiphilic lipopeptides at the LC-aqueous interface, which can potentially be used in selectively detecting the activity of specific enzymes and other biomolecular interactions.

Application of hairpin DNA-based biosensors with various signal amplification strategies in clinical diagnosis

Biosensors have been commonly used in biomedical diagnostic tools in recent years, because of a wide range of application, such as point-of-care monitoring of treatment and disease progression, drug discovery, commonly use food control, environmental monitoring and biomedical research. Additionally, development of DNA biosensors has been increased enormously over the past few years as confirmed by the large number of scientific publications in this field. A wide range of techniques can be used for the development of DNA biosensors, such as DNA nano-machines and various signal amplification strategies. This article selectively reviews the recent advances in DNA base biosensors with various signal amplification strategies for detection of cancer DNA and microRNA, infectious microorganisms, and toxic metal ions.

Gold nanoparticle-mediated signal amplification of liquid crystal biosensors for dopamine

A new design was developed for detection of dopamine using a boronic acid based amphiphile at aqueous–liquid crystal interface. The detection was highly enhanced in presence of gold nanoparticles.

Liquid Crystals: A Novel Approach for Cancer Detection and Treatment

Liquid crystals are defined as the fourth state of matter forming between solid and liquid states. Earlier the applications of liquid crystals were confined to electronic instruments, but recent research findings suggest multiple applications of liquid crystals in biology and medicine. Here, the purpose of this review article is to discuss the potential biological impacts of liquid crystals in the diagnosis and prognosis of cancer along with the risk assessment. In this review, we also discussed the recent advances of liquid crystals in cancer biomarker detection and treatment in multiple cell line models. Cases reviewed here will demonstrate that cancer diagnostics based on the multidisciplinary technology and intriguingly utilization of liquid crystals may become an alternative to regular cancer detection methodologies. Additionally, we discussed the formidable challenges and problems in applying liquid crystal technologies. Solving these problems will require great effort and the way forward is through the multidisciplinary collaboration of physicists, biologists, chemists, material-scientists, clinicians, and engineers. The triumphant outcome of these liquid crystals and their applications in cancer research would be convenient testing for the detection of cancer and may result in treating the cancer patients non-invasively.

A novel logic gate based on liquid-crystals responding to the DNA conformational transition

Described herein is a novel liquid crystal (LC)-based DNA logic gate constructed via employing the reorientation of LCs triggered by metal-ion-mediated DNA probe conformational changes.

Programmable and Multifunctional DNA-Based Materials for Biomedical Applications

DNA encodes the genetic information; recently, it has also become a key player in material science. Given the specific Watson-Crick base-pairing interactions between only four types of nucleotides, well-designed DNA self-assembly can be programmable and predictable. Stem-loops, sticky ends, Holliday junctions, DNA tiles, and lattices are typical motifs for forming DNA-based structures. The oligonucleotides experience thermal annealing in a near-neutral buffer containing a divalent cation (usually Mg²⁺ ) to produce a variety of DNA nanostructures. These structures not only show beautiful landscape, but can also be endowed with multifaceted functionalities. This Review begins with the fundamental characterization and evolutionary trajectory of DNA-based artificial structures, but concentrates on their biomedical applications. The coverage spans from controlled drug delivery to high therapeutic profile and accurate diagnosis. A variety of DNA-based materials, including aptamers, hydrogels, origamis, and tetrahedrons, are widely utilized in different biomedical fields. In addition, to achieve better performance and functionality, material hybridization is widely witnessed, and DNA nanostructure modification is also discussed. Although there are impressive advances and high expectations, the development of DNA-based structures/technologies is still hindered by several commonly recognized challenges, such as nuclease instability, lack of pharmacokinetics data, and relatively high synthesis cost.

Label-free liquid crystal biosensor for cecropin B detection

A label-free liquid crystal (LC) biosensor based on orientation changes of LC molecules was reported for the detection of cecropin B. The homeotropic-to-tilted alignment transition of LC molecules, induced by the specific binding event between cecropin B and anti-cecropin B antibody immobilized via glutaraldehyde, could result in obvious change of the optical appearance from a dark to a bright response and as a result, the detection limit of cecropin B was as low as 50 ng/mL. The average gray-scale intensities (GIs) of optical appearances were calculated to quantitatively analyse cecropin B concentrations. This study offers a simple, highly sensitive and specific, lable-free method for cecropin B detection.

Poly(l-lysine)-Coated Liquid Crystal Droplets for Sensitive Detection of DNA and Their Applications in Controlled Release of Drug Molecules

Interactions between DNA and adsorbed poly(l-lysine) (PLL) on liquid crystal (LC) droplets were investigated using polarizing optical microcopy and epi-fluorescence microscopy. Earlier, we demonstrated that adsorption of PLL to the LC/aqueous interface resulted in homeotropic orientation of the LC and thus exhibited a radial configuration of the LC confined within the droplets. Subsequent adsorption of DNA (single-stranded DNA/double-stranded DNA) at PLL-coated LC droplets was found to trigger an LC reorientation within the droplets, leading to preradial/bipolar configuration of those droplets. To our surprise, subsequent exposure of complementary ssDNA to ssDNA/adsorbed PLL-modified LC droplets did not cause the LC reorientation. This is likely due to the formation of polyplexes (DNA-PLL complex) as confirmed by fluorescence microscopy and atomic force microscopy. In addition, dsDNA-adsorbed PLL droplets have been found to be effectively useful to displace (controlled release) propidium iodide (a model drug) encapsulated within dsDNA over time. These observations suggest the potential for a label-free droplet-based LC detection system that can respond to DNA and may provide a simple method to develop DNA-based drug nanocarriers.

Thermotropic liquid crystal films for biosensors and beyond

Recent results on structural properties and possible bio-sensing applications of planar liquid crystal films are reviewed.

Elastic response and phase behavior in binary liquid crystal mixtures

Utilizing density-of-states simulations, we perform a full mapping of the phase behavior and elastic responses of binary liquid crystalline mixtures represented by the multicomponent Lebwohl-Lasher model. Our techniques are able to characterize the complete phase diagram, including nematic-nematic phase separation predicted by mean-field theories, but previously not observed in simulations. Mapping this phase diagram permits detailed study of elastic properties across the miscible nematic region. Importantly, we observe for the first time local phase separation and disordering driven by the application of small linear perturbations near the transition temperature and more significantly through nonlinear stresses. These findings are of key importance in systems of blended nematics which contain particulate inclusions, or are otherwise confined.

Liquid crystals based sensing platform-technological aspects

In bulk phase, liquid crystalline molecules are organized due to non-covalent interactions and due to delicate nature of the present forces; this organization can easily be disrupted by any small external stimuli. This delicate nature of force balance in liquid crystals organization forms the basis of Liquid-crystals based sensing scheme which has been exploited by many researchers for the optical visualization and sensing of many biological interactions as well as detection of number of analytes. In this review, we present not only an overview of the state of the art in liquid crystals based sensing scheme but also highlight its limitations. The approaches described below revolve around possibilities and limitations of key components of such sensing platform including bottom substrates, alignments layers, nature and type of liquid crystals, sensing compartments, various interfaces etc. This review also highlights potential materials to not only improve performance of the sensing scheme but also to bridge the gap between science and technology of liquid crystals based sensing scheme.