A highly sensitive quartz crystal microbalance immunosensor based on magnetic bead-supported bienzymes catalyzed mass enhancement strategy

An Unconventional Immunosensor for Biomolecule Detection via Nonspecific Gold Nanoparticle-Antibody Interactions

Immunogold, that is, gold nanoparticles (AuNPs) conjugated with biomolecules such as antibodies and peptides, have been widely used to construct sandwiched immunosensors for biodetection. Two main challenges in these immunoassays are difficulties in finding and validating a suitable antibody, and the nonspecific interaction between the substrate and immunogold, which lowers the detection sensitivity and even causes false results. To avoid these issues, we took advantage of the nonspecific interaction between AuNPs and capture antibodies and proposed a new sensing mechanism. That is, after the capture of analyte targets by the capture antibodies on the substrate, AuNPs of certain chemical functionality would preferably bind to the free capture antibodies. Consequently, the amount of deposited AuNPs will inversely depend on the concentration of the analytes. As a proof-of-concept, we designed a mass-based sensor where anti-IgG antibodies were coated on a quartz crystal microbalance substrate. After IgG was introduced, tannic acid-capped AuNPs were applied to bind with the free anti-IgG antibody molecules. A frequency change (Δf) of the quartz substrate was induced by the increased mass loading. To further amplify the loading mass, an Ag enhancer solution was added, and Ag growth was catalyzed by the bound AuNPs. The Δf response showed a concentration-dependent decrease when increasing IgG concentration with a detection limit of 2.6 ng/mL. This method relies on the nonspecific interaction between AuNPs and anti-IgG antibodies to realize sensitive detection of IgG and eliminates the use of detection antibodies. The concept is an alternative to many existing immunoassay technologies.

Magnetically Modulated Differential Quartz Crystal Microbalances for Rapid, Ultrasensitive, and Direct Probing of Prostate-Specific Antigens Conjugated with Magnetic Beads

The occurrence and development of diseases are closely related to overexpression of specific biomarkers in the serum of patients. Rapid and sensitive biomarker detection is beneficial for early diagnosis and treatment. However, the current laboratory processes and assays for biomarker detection are expensive and time-consuming, and their operation also requires a large number of professionals. We developed a magnetically modulated differential quartz crystal microbalance (MMD-QCM) method combined with magnetic bead (MB) labels for rapid and highly sensitive quantitative detection of prostate-specific antigen (PSA). Because MBs exhibit magnetized rotation motion under an applied AC magnetic field, a pair of QCMs are utilized to measure the difference between the magnetic motion intensities of the MBs and the MB-PSA immune complex to determine the PSA concentration. Experimental results demonstrate that the proposed method can be adopted to determine the PSA concentration in a wide range of 0.01-1000 ng/mL as well as exhibit a low detection limit of 0.065 ng/mL. In addition, the proposed scheme enables fast detection and low sample consumption. The single detection process takes less than 4 h and requires only 113 μL of sample solution. The proposed detection strategy is superior to the existing detection method and can be effectively used in early screening and prognostic diagnosis of cancer and other related diseases owing to its simplicity, low cost, and high speed.

Emerging Methods in Biosensing of Immunoglobin G-A Review

Human antibodies are produced due to the activation of immune system components upon exposure to an external agent or antigen. Human antibody G, or immunoglobin G (IgG), accounts for 75% of total serum antibody content. IgG controls several infections by eradicating disease-causing pathogens from the body through complementary interactions with toxins. Additionally, IgG is an important diagnostic tool for certain pathological conditions, such as autoimmune hepatitis, hepatitis B virus (HBV), chickenpox and MMR (measles, mumps, and rubella), and coronavirus-induced disease 19 (COVID-19). As an important biomarker, IgG has sparked interest in conducting research to produce robust, sensitive, selective, and economical biosensors for its detection. To date, researchers have used different strategies and explored various materials from macro- to nanoscale to be used in IgG biosensing. In this review, emerging biosensors for IgG detection have been reviewed along with their detection limits, especially electrochemical biosensors that, when coupled with nanomaterials, can help to achieve the characteristics of a reliable IgG biosensor. Furthermore, this review can assist scientists in developing strategies for future research not only for IgG biosensors but also for the development of other biosensing systems for diverse targets.

Concept of the "Universal Slope": Toward Substantially Shorter Decentralized Insulin Immunoassays

Decentralized sensing of analytes in remote locations is today a reality. However, the number of measurable analytes remains limited, mainly due to the requirement for time-consuming successive standard additions calibration used to address matrix effects and resulting in greatly delayed results, along with more complex and costly operation. This is particularly challenging in commonly used immunoassays of key biomarkers that typically require from 60 to 90 min for quantitation based on two standard additions, hence hindering their implementation for rapid and routine diagnostic applications, such as decentralized point-of-care (POC) insulin testing. In this work we have developed and demonstrated the theoretical framework for establishing a universal slope for direct calibration-free POC insulin immunoassays in serum samples using an electrochemical biosensor (developed originally for extended calibration by standard additions). The universal slope is presented as an averaged slope constant, relying on 68 standard additions-based insulin determinations in human sera. This new quantitative analysis approach offers reliable sample measurement without successive standard additions, leading to a dramatically simplified and faster assay (30 min vs 90 min when using 2 standard additions) and greatly reduced costs, without compromising the analytical performance while significantly reducing the analyses costs. The substantial improvements associated with the new universal slope concept have been demonstrated successfully for calibration-free measurements of serum insulin in 30 samples from individuals with type 1 diabetes using meticulous statistical analysis, supporting the prospects of applying this immunoassay protocol to routine decentralized POC insulin testing.

Low-fouling CNT-PEG-hydrogel coated quartz crystal microbalance sensor for saliva glucose detection

Saliva glucose detection based on a quartz crystal microbalance (QCM) sensor has emerged as a promising tool and a non-invasive diagnostic technique for diabetes. However, the low glucose concentration and strong protein interference in the saliva hinder the QCM sensors from practical applications. In this study, we present a robust and simple anti-fouling CNT-PEG-hydrogel film-coated QCM sensor for the detection of saliva glucose with high sensitivity. The CNT-PEG-hydrogel film consists of two layers; the bottom base PBA-hydrogel film is designed to recognize the glucose while the top CNT-PEG layer is used to restrict protein adsorption and improve the biocompatibility. Our results show that this CNT-PEG-hydrogel film exhibited a 10-fold enhancement on the detection limit compared to the PBA-hydrogel. Meanwhile, the adsorption of proteins on the surface of the CNT-PEG-hydrogel film, including bovine serum albumin (BSA), mucin (MUC), and fibrinogen (FIB), were reduced by 99.1%, 77.8%, and 83.7%, respectively. The CNT-PEG-hydrogel film could detect the typical saliva glucose level (0-50 mg L-1) in 10% saliva with a good responsivity. To sum up, this new tool with low-fouling film featuring high stability, specificity, and selectivity holds great potential for non-invasive monitoring of saliva glucose in human physiological levels.

AuNP array coated substrate for sensitive and homogeneous SERS-immunoassay detection of human immunoglobulin G

Owing to the high sensitivity, fast responsiveness and high specificity, immunoassays using surface-enhanced Raman scattering (SERS) as the readout signal displayed great potential in disease diagnosis. In this study, we developed a SERS-immunoassay method for the detection of human immunoglobulin G (HIgG). Upon involving well-ordered AuA on a SERSIA substrate, the LSPR effect was further enhanced to generate a strong and uniform Raman signal through the formation of sandwich structure with the addition of target HIgG and SERSIA tag. Optimization of the assay provided a wide linear range (0.1–200 μg mL⁻¹) and low limit of detection (0.1 μg mL⁻¹). In addition, the SERS-immunoassay method displayed excellent specificity and was homogeneous, which guaranteed the practical use of this method in the quantitative detection of HIgG. To validate this assay, human serum was analysed, which demonstrated the potential advantages of SERS-immunoassay technology in clinical diagnostics.

An AuNP array coated substrate was developed for the SERS-immunoassay detection of human immunoglobulin G.

A Portable, Label-Free, Reproducible Quartz Crystal Microbalance Immunochip for the Detection of Zearalenone in Food Samples

This research reports a portable immunochip, based on quartz crystal microbalance (QCM) for label-free, low-cost qualitative detection of zearalenone (ZEN) in food samples. The experimental parameters in the functionalization and working process were evaluated in detail, in order to achieve a high accuracy and sensitivity. Under optimal conditions, the ZEN concentration at an inhibition ratio of 50% and 15% of the proposed QCM immunochip achieved 3.41 µg L⁻¹ and 0.37 µg L⁻¹, respectively. This portable QCM immunochip also exhibited high specificity, no obvious cross-reaction to five structural analogs of ZEN, and showed other mycotoxins. It could finish the whole qualitative measurement within 30 min, showed good stability during the processes of preparation (SD < 5%, n = 9), storage (frequency response >90%, in PBS at 4 °C for 15 days), and application (frequency response >90% after being reused 6 times). The developed QCM immunochip obtained accurate and repeatable recovery results in ZEN analysis in the chosen food samples (corn, wheat flour, soy sauce, and milk), which had a high correlation (R² = 0.9844) with that achieved by the HPLC–MS/MS method. In short, this work developed a portable, stable, and reproducible QCM immunochip that could be used for rapid, low-cost, and sensitively measurement of ZEN content in real food samples.

Metal composite oxides Bi2MoO6/IL membrane as matrix for constructing ultrasensitive electrochemical immunosensor

In the process of diagnosis and disease monitoring, it is important to quickly and easily detect protein biomarkers. The strategy reported here is an attempt to prepare Bi₂MoO₆ nanomaterial with new three-dimensional holes morphology surrounded by rod and sheet to construct a simple and sensitive sensing platform, where Bi₂MoO₆/ionic liquid (IL) composite was modified on the carbon paste electrode (CPE). In order to monitor the assembly process of human IgG immunosensors, a plurality of electrochemical tests such as cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) was executed. The obtained BSA/anti-IgG/GA/Bi₂MoO6/IL-CPE displayed prominent conductivity and high sensitivity in detecting human immunoglobulin G (human IgG). Under the optimal experimental conditions, the results by differential pulse voltammetry (DPV) showed that the constructed label-free IgG immunosensor can detect IgG in the range of 0.01 to 1000 ng mL^-1, and limit of detection (LOD) was 4 pg mL^-1. The immunosensor displayed good performances including selectivity, reproducibility, and stability. Based on preliminary experiments, Bi₂MoO₆ and its composite materials are very promising for the construction of a variety biosensors for the analysis of other biological substances. Graphical abstract.

Antibody immobilization techniques in mass sensitive immunosensor: enhanced sensitivity through limited mass load

Background:

Biosensors are analytical devices that include a sample-delivery approach between a biological recognition element and a transducer required to convert the physicochemical change produced from the interaction of biological molecules-receptor interaction into signal. The immunosensor is a special type of biosensors that includes an antibody as a biorecognition element to detect analyte as antigens. In mass-sensitive sensors, antigen-antibody interactions can be specified by measuring the frequency change and most commonly knowns are surface acoustic wave, bulk acoustic wave, quartz crystal microbalance and microcantilevers.

Methods:

Different methods for antibody immobilization including functionalization of the transducer surface with specific groups have been reported for antibody immobilization. This stage affects the limit of detection and overall performance. In this review, perspectives on immobilization strategies of mass sensitive immunosensors according to transducer types will be presented. The choice of immobilization methods and their impact on performance in terms of capture molecule loading, orientation and signal improvement is will also be discussed.

Results:

One of the most critical point during configuration of the biorecognition layer is to improve the sensitivity. Therefore, we initially focused on comparisons of the antibody immobilization strategies in the biorecognition layer in terms of mass load level and high sensitivity.

Conclusion:

The lack of significant data on the mass accumulations up to the functionalization and antibody immobilization steps, which are the basis of immusensor production, has been identified. However, mass sensitive immunosensors have the potential to become more common and effective analytical devices for many application areas.

A portable pencil-like immunosensor for point-of-care testing of inflammatory biomarkers

Portable devices for immunoassays are in high demand for point-of-care testing (POCT) of biomarkers. Here, we report a robust portable pencil-like immunosensor (PPS) platform for the determination of three inflammatory biomarkers including interleukin-6 (IL-6), procalcitonin (PCT), and C-reactive protein (CRP) in human serum samples. The PPS platform is composed of a unique pencil-like optical-fiber-based sensor, a reagent strip consisting of a series of pencil-cap-like wells, and a battery-powered photon counting detector for recording chemiluminescence. The PPS probe moves from well to well with a plug-into/out approach and goes through the immunoassay steps. Each fiber probe in the PPS platform can be sequentially used in up to 10 assays by simply propelling the intact probe out of the pencil body. The PPS platform is well-integrated into a portable suitcase-like device (32 cm × 23 cm × 11 cm) and is only 3 kg in weight. The sensor has good repeatability and can maintain 90% response after 14 days of storage at room temperature, showing its ability for assays in the field. The good linear relationship and efficient dynamic range with a limit-of-detection (LOD) of 1.05 pg/mL for IL-6, 10.64 pg/mL for PCT, and 29.40 ng/mL for CRP are obtained. The assay results are compared with clinical methods, and the findings confirm the high accuracy and precision of the proposed method. The proposed PPS platform is versatile and operable with minimal instruments and technical skills and simplifies the process of immune analysis, thus has great prospects for POCT of biomarkers. Graphical abstract.

Label-free detection of γ-aminobutyric acid based on silicon nanowire biosensor

γ-Aminobutyric acid (GABA) is an important inhibitory neurotransmitter in the central nervous system (CNS), which acts as a major biomarker for neurological disorders such as Parkinson's disease and Meningitis. To this end, the precise measurement of GABA molecule arisen as an important subject for the effective diagnosis and treatment of neurological disorders. However, yet highly sensitive biosensor systems which can analyze a wide range of GABA molecule in a fast response manner have not been reported. In this study, for the first time, a silicon nanowire field-effect transistor (FET) device based immunosensor was developed to detect GABA molecule. Zig-zag shaped silicon nanowires has been fabricated by electron beam lithography and the electrical property p-type FET device was validated through semiconductor analyzer. The optimal immobilizing condition of antibody against GABA molecule was determined by the fluorescent signal measurement. Various concentrations of GABA ranging from 970 fM to 9.7 μM were sensitively measured by conductance change on silicon nanowire-based through the immunoreactions. Further, owing to the ease of miniaturization and label-free system, we believe that the suggested device system has a potential to be utilized for an implantable biosensor to detect neurotransmitter in the brain and can create new opportunities in the field of diagnosis and treatment of neurological disorders.

Applications of Gold Nanoparticles in Non-Optical Biosensors

Due to their unique properties, such as good biocompatibility, excellent conductivity, effective catalysis, high density, and high surface-to-volume ratio, gold nanoparticles (AuNPs) are widely used in the field of bioassay. Mainly, AuNPs used in optical biosensors have been described in some reviews. In this review, we highlight recent advances in AuNP-based non-optical bioassays, including piezoelectric biosensor, electrochemical biosensor, and inductively coupled plasma mass spectrometry (ICP-MS) bio-detection. Some representative examples are presented to illustrate the effect of AuNPs in non-optical bioassay and the mechanisms of AuNPs in improving detection performances are described. Finally, the review summarizes the future prospects of AuNPs in non-optical biosensors.

Umbelliferone as a Small Molecular Peroxidase Mimic towards Sensitive Detection of H2O2 and Glucose

In this work, umbelliferone, a kind of coumarin derivative, was proved to exhibit peroxidase-like activity that could catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of hydrogen peroxide to generate a blue-colored oxide (oxTMB). The catalytic mechanism is similar to that of native enzymes (e.g. horseradish peroxidase, HRP) and nanozymes, which follow the Michaelis-Menten kinetics behavior. Meanwhile, the 7-hydroxyl group of umbelliferone plays a significant role in the peroxidase-like activity. Compared with enzymes and nanozymes, this small molecular mimic enzyme possesses the advantages of low cost, simple molecular structures, small molecular weight and high stability against harsh conditions. Based on the favorable peroxidase mimetic activity of umbelliferone, a convenient, practical and sensitive H₂O₂ and glucose detection method was successfully established. This work not only opens some new inspirations into seeking for novel molecular enzyme mimetics with excellent catalytic activities, but also provides promising assays for clinical diagnosis.

Ultrasensitive label-free optical microfiber coupler biosensor for detection of cardiac troponin I based on interference turning point effect

Sensitive detection of cardiac biomarkers is critical for clinical diagnostics of myocardial infarction (MI) while such detection is quite challenging due to the ultra-low concentration of cardiac biomarkers. In this work, a label-free immunosensor based on optical microfiber coupler (OMC) has been developed for the ultrasensitive detection of cardiac troponin I (cTnI), a selective and highly sensitive biomarker of acute myocardial infarction (AMI). CTnI monoclonal antibodies were immobilized on the surface of the fiber through polyelectrolyte layer using layer-by-layer deposition technique. For refractive index sensing characterization, an ultra-high sensitivity of 91777.9 nm/RIU was achieved when the OMC works around the dispersion turning point, which is the highest experimental demonstration in the field of fiber-optic evanescent biosensors. For biosensing, the immunosensor with good specificity showed a linear wavelength shift in the range of 2-10 fg/mL and an ultra-low detection limit of 2 fg/mL. Such immunosensors have huge application potential for the detection of cardiac biomarkers of myocardial infarction due to simple detection scheme, quick response time, ease of handling and miniaturation.

QCM-nanomagnetic beads biosensor for lead ion detection

A QCM biosensor combined with NMBs has been proposed for Pb²⁺detection with a lower detection limit of 0.3 pM.

Catalytic chemistry of glucose oxidase in cancer diagnosis and treatment

This tutorial review focuses on the state-of-the-art progress in GOx-based cancer diagnosis and treatment, including the general principles for the design and construction of GOx-based biosensors and cancer therapeutic approaches, and their biological applications in detail. Moreover, the current trends and key problems, as well as the challenges and future prospects of GOx-based catalytic systems in biomedicine are also discussed in the end.

The Resistance-Amplitude-Frequency Effect of In-Liquid Quartz Crystal Microbalance

Due to the influence of liquid load, the equivalent resistance of in-liquid quartz crystal microbalance (QCM) increases sharply, and the quality factor and resonant frequency decreases. We found that the change in the resonant frequency of in-liquid QCM consisted of two parts: besides the frequency changes due to the mass and viscous load (which could be equivalent to motional inductance), the second part of frequency change was caused by the increase of motional resistance. The theoretical calculation and simulation proved that the increases of QCM motional resistance may indeed cause the decreases of resonant frequency, and revealed that the existence of static capacitance was the root cause of this frequency change. The second part of frequency change (due to the increases of motional resistance) was difficult to measure accurately, and may cause great error for in-liquid QCM applications. A technical method to reduce the interference caused by this effect is presented. The study contributes to the accurate determination of the frequency and amplitude change of in-liquid QCM caused by liquid load, which is significant for the QCM applications in the liquid phase.

A highly sensitive electrochemical immunosensor for hepatitis B virus surface antigen detection based on Hemin/G-quadruplex horseradish peroxidase-mimicking DNAzyme-signal amplification

Here we prepared an electrochemical immunosensor employing Au sheet as working electrode, Fe₃O₄ magnetic nanoparticles (MNPs) as supporting matrix and hemin/G-quadruplex DNAzyme as signal amplifier for determination of hepatitis B virus surface antigen (HBsAg). First, the primary antibody of HBs (Ab₁) was immobilized on the surface of the carboxyl-modified MNPs. Then, the assembly of antibody and alkylthiol/G-quadruplex DNA/hemin on gold nanoparticles was used as bio-bar-coded nanoparticle probe. Protein target was sandwiched between the primary antibody of HBs (Ab₁) immobilized on the MNPs and hemin bio-bar-coded AuNPs probe labeled antibody (Ab₂). Hemin/G-quadruplex structure as HRP mimicking-DNAzyme significantly improved the catalytic reduction of H₂O₂ by oxidation of methylene blue (MB). Square wave voltammetry signals of MB provided quantitative measurements of HBsAg with a linear concentration range of 0.3-1000 pgmL^-1 and detection limit of 0.19 pgmL^-1. Due to efficient catalytic activity of HRP mimicking-DNAzyme, the proposed immunosensor exhibited high sensitivity and it holds great promise for clinical application and provides a new platform for immunosensor development and fast disease diagnosis.

Effective antibodies immobilization and functionalized nanoparticles in a quartz-crystal microbalance-based immunosensor for the detection of parathion

BACKGROUND

Biosensor-based detection provides a rapid and low-cost alternative to conventional analytical methods for revealing the presence of the contaminants in water as well as solid matrices. Although important to be detected, small analytes (few hundreds of Daltons) are an issue in biosensing since the signal they induce in the transducer, and specifically in a Quartz-Crystal Microbalance, is undetectable. A pesticide like parathion (M = 292 Da) is a typical example of contaminant for which a signal amplification procedure is desirable.

METHODS/FINDINGS

The ballasting of the analyte by gold nanoparticles has been already applied to heavy target as proteins or bacteria to improve the limit of detection. In this paper, we extend the application of such a method to small analytes by showing that once the working surface of a Quartz-Crystal Microbalance (QCM) has been properly functionalized, a limit of detection lower than 1 ppb is reached for parathion. The effective surface functionalization is achieved by immobilizing antibodies upright oriented on the QCM gold surface by a simple photochemical technique (Photonic Immobilization Technique, PIT) based on the UV irradiation of the antibodies, whereas a simple protocol provided by the manufacturer is applied to functionalize the gold nanoparticles. Thus, in a non-competitive approach, the small analyte is made detectable by weighing it down through a "sandwich protocol" with a second antibody tethered to heavy gold nanoparticles. The immunosensor has been proved to be effective against the parathion while showing no cross reaction when a mixture of compounds very similar to parathion is analyzed.

CONCLUSION/SIGNIFICANCE

The immunosensor described in this paper can be easily applied to any small molecule for which polyclonal antibodies are available since both the functionalization procedure of the QCM probe surface and gold nanoparticle can be applied to any IgG, thereby making our device of general application in terms of target analyte.

A Highly Sensitive Immunosorbent Assay Based on Biotinylated Graphene Oxide and the Quartz Crystal Microbalance

A high-sensitivity flow-based immunoassay is reported based on a gold-coated quartz crystal microbalance (QCM) chip functionalized directly in the QCM without requiring covalent conjugation steps. Specifically, the irreversible adsorption of a biotinylated graphene oxide-avidin complex followed by loading of a biotinylated capture antibody is applied to avoid more complex conventional surface modification chemistries and enable chip functionalization and sensing all within the QCM instrument. The resulting immunosensors exhibit significantly lower nonspecific protein adsorption and stronger signal for antigen sensing relative to simple avidin-coated sensors. Reproducible quantification of rabbit IgG concentrations ranging from 0.1 ng/mL to 10 μg/mL (6 orders of magnitude) can be achieved depending on the approach used to quantify the binding with simple mass changes used to detect higher concentrations and a horseradish peroxidase-linked detection antibody that converts its substrate to a measurable precipitate used to detect very low analyte concentrations. Sensor fabrication and assay performance take ∼5 h in total, which is on par with or faster than other techniques. Quantitative sensing is possible in the presence of complex protein mixtures, such as human plasma. Given the broad availability of biotinylated capture antibodies, this method offers both an easy and flexible platform for the quantitative sensing of a variety of biomolecule targets.

A novel ratiometric dual-emission fluorescence magnetic nanohybrid for HIgG immunoassay

The proposed ratiometric dual-emission (carbon dots and QDs) fluorescence magnetic nanohybrid displayed excellent analytical performance for the detection of HIgG.