Edge promoted ultrasensitive electrochemical detection of organic bio-molecules on epitaxial graphene nanowalls

Hydrogen-Terminated Two-Dimensional Germanane/Silicane Alloys as Self-Powered Photodetectors and Sensors

2D monoelemental materials, particularly germanene and silicene (the single layer of germanium and silicon), which are the base materials for modern electronic devices demonstrated tremendous attraction for their 2D layer structure along with the tuneable electronics and optical band gap. The major shortcoming of synthesized thermodynamically very unstable layered germanene and silicene with their inclination toward oxidation was overcome by topochemical deintercalation of a Zintl phase (CaGe₂, CaGe_1.5Si_0.5, and CaGeSi) in a protic environment. The exfoliated Ge-H, Ge_0.75Si_0.25H, and Ge_0.5Si_0.5H were successfully synthesized and employed as the active layer for photoelectrochemical photodetectors, which showed broad response (420-940 nm), unprecedented responsivity, and detectivity on the order of 168 μA W^-1 and 3.45 × 10⁸ cm Hz^1/2 W^-1, respectively. The sensing capability of exfoliated germanane and silicane composites was explored using electrochemical impedance spectroscopy with ultrafast response and recovery time of less than 1 s. These positive findings serve as the application of exfoliated germanene and silicene composites and can pave a new path to practical applications in efficient future devices.

2D Few-Layered PdPS: Toward High-Efficient Self-Powered Broadband Photodetector and Sensors

Photodetectors and sensors have a prominent role in our lives and cover a wide range of applications, including intelligent systems and the detection of harmful and toxic elements. Although there have been several studies in this direction, their practical applications have been hindered by slow response and low responsiveness. To overcome these problems, we have presented here a self-powered (photoelectrochemical, PEC), ultrasensitive, and ultrafast photodetector platform. For this purpose, a novel few-layered palladium-phosphorus-sulfur (PdPS) was fabricated by shear exfoliation for effective photodetection as a practical assessment. The characterization of this self-powered broadband photodetector demonstrated superior responsivity and specific detectivity in the order of 33 mA W^-1 and 9.87 × 10¹⁰ cm Hz^1/2 W^-1, respectively. The PEC photodetector also exhibits a broadband photodetection capability ranging from UV to IR spectrum, with the ultrafast response (∼40 ms) and recovery time (∼50 ms). In addition, the novel few-layered PdPS showed superior sensing ability to organic vapors with ultrafast response and a recovery time of less than 1 s. Finally, the photocatalytic activity in the form of hydrogen evolution reaction was explored due to the suitable band alignment and pronounced light absorption capability. The self-powered sensing platforms and superior catalytic activity will pave the way for practical applications in efficient future devices.

Graphene and Its Derivatives: Synthesis and Application in the Electrochemical Detection of Analytes in Sweat

Wearable sensors and invasive devices have been studied extensively in recent years as the demand for real-time human healthcare applications and seamless human-machine interaction has risen exponentially. An explosion in sensor research throughout the globe has been ignited by the unique features such as thermal, electrical, and mechanical properties of graphene. This includes wearable sensors and implants, which can detect a wide range of data, including body temperature, pulse oxygenation, blood pressure, glucose, and the other analytes present in sweat. Graphene-based sensors for real-time human health monitoring are also being developed. This review is a comprehensive discussion about the properties of graphene, routes to its synthesis, derivatives of graphene, etc. Moreover, the basic features of a biosensor along with the chemistry of sweat are also discussed in detail. The review mainly focusses on the graphene and its derivative-based wearable sensors for the detection of analytes in sweat. Graphene-based sensors for health monitoring will be examined and explained in this study as an overview of the most current innovations in sensor designs, sensing processes, technological advancements, sensor system components, and potential hurdles. The future holds great opportunities for the development of efficient and advanced graphene-based sensors for the detection of analytes in sweat.

Graphene and Carbon Nanotube-based Electrochemical Sensing Platforms for Dopamine

Dopamine (DA) is an important neurotransmitter, which is created and released from the central nervous system. It plays a crucial role in human activities, like cognition, emotions, and response to anything. Maladjustment of DA in human blood serum results in different neural diseases, like Parkinson's and Schizophrenia. Consequently, researchers have started working on DA detection in blood serum, which is undoubtedly a hot research area. Electrochemical sensing techniques are more promising to detect DA in real samples. However, utilizing conventional electrodes for selective determination of DA encounters numerous problems due to the coexistence of other materials, such as uric acid and ascorbic acid, which have an oxidation potential close to DA. To overcome such problems, researchers have put their focus on the modification of bare electrodes. The aim of this review is to present recent advances in modifications of most used bare electrodes with carbonaceous materials, especially graphene, its derivatives, and carbon nanotubes, for electrochemical detection of DA. A brief discussion about the mechanistic phenomena at the electrode interface has also been included in this review.

Self-Powered Broadband Photodetector and Sensor Based on Novel Few-Layered Pd3(PS4)2 Nanosheets

Optoelectronics and sensing devices are of enormous importance in our modern lives, which has propelled the scientific community to explore new two-dimensional (2D) nanomaterials to meet the requirements of future devices. Herein, we present the exfoliation of palladium thiophosphate (Pd₃(PS₄)₂) by mechanical shear force exfoliation. The Pd₃(PS₄)₂-based photoelectrochemical (PEC) device demonstrated self-powered broadband photodetection in the range of 385-940 nm with an unprecedented responsivity of 2 A W^-1 and a specific detectivity of about 8.67 × 10¹¹ cm Hz^1/2 W^-1 under the illumination of 420 nm LED light. The crucial parameters such as photoresponsivity, response, and recovery time of the device can be controlled by an externally applied voltage and the analyte concentration. Moreover, Pd₃(PS₄)₂-based vapor-sensing devices exhibited frequency-dependent selective acetone sensing in the presence of other organic vapors with an ultrafast response and a recovery time of less than 1 s. Finally, the photocatalytic activity of Pd₃(PS₄)₂ was revealed, which can be attributed to the presence of an appropriate band alignment with the catalytic activity of Pd. This novel material with the aforementioned fascinating phenomenon will pave the way toward practical future applications in optoelectronics and sensing.

Sensitive, Reusable, Surface-Enhanced Raman Scattering Sensors Constructed with a 3D Graphene/Si Hybrid

Surface-enhanced Raman scattering (SERS) substrates based on graphene and its derivatives have recently attracted attention among those interested in the detection of trace molecules; however, these substrates generally show poor uniformity, an unsatisfactory enhancement factor, and require a complex fabrication process. Herein, we design and fabricate three-dimensional (3D) graphene/silicon (3D-Gr/Si) heterojunction SERS substrates to detect various types of molecules. Notably, the detection limit of 3D-Gr/Si can reach 10^-10 M for rhodamine 6G (R6G) and rhodamine B (RB), 10^-7 M for crystal violet (CRV), copper(II) phthalocyanine (CuPc), and methylene blue (MB), 10^-8 M for dopamine (DA), 10^-6 M for bovine serum albumin (BSA), and 10^-5 M for melamine (Mel), which is superior to most reported graphene-based SERS substrates. Besides, the proposed 3D-Gr/Si heterojunction SERS substrates can achieve a high uniformity with relative standard deviations (RSDs) of less than 5%. Moreover, the 3D-Gr/Si SERS substrates are reusable after washing with ethyl alcohol to remove the adsorbed molecules. These excellent SERS performances are attributed to the novel 3D structure and abundantly exposed atomically thin edges, which facilitate charge transfer between 3D-Gr and probe molecules. We believe that the 3D-Gr/Si heterojunction SERS substrates offer potential for practical applications in biochemical molecule detection and provide insight into the design of high-performance SERS substrates.

Progress in modifications of 3D graphene-based adsorbents for environmental applications

3D graphene-based materials are promising adsorbents for environmental applications. Furthermore, increasing attention has been paid to the improvement of 3D graphene adsorbents for removing pollutants. In this article, the progress in the modification of 3D graphene materials and their performance for removing pollutants were reviewed. The modification strategies, which were classified as (1) the activation with CO₂ (steam and other oxidants) and (2) the surface functionalization with polymers (metals, and metal oxides), were evaluated. The performances of modified 3D graphene materials were assessed for the removal of waste gases (such as CO₂), refractory organics, and heavy metals. The challenges and future research directions were discussed for the environmental applications of 3D graphene materials.

Edge-Rich Interconnected Graphene Mesh Electrode with High Electrochemical Reactivity Applicable for Glucose Detection

The development of graphene structures with controlled edges is greatly desired for understanding heterogeneous electrochemical (EC) transfer and boosting EC applications of graphene-based electrodes. We herein report a facile, scalable, and robust method to produce graphene mesh (GM) electrodes with tailorable edge lengths. Specifically, the GMs were fabricated at 850 °C under a vacuum level of 0.6 Pa using catalytic nickel templates obtained based on a crack lithography. As the edge lengths of the GM electrodes increased from 5.48 to 24.04 m, their electron transfer rates linearly increased from 0.08 to 0.16 cm∙s⁻¹, which are considerably greater than that (0.056 ± 0.007 cm∙s⁻¹) of basal graphene structures (defined as zero edge length electrodes). To illustrate the EC sensing potentiality of the GM, a high-sensitivity glucose detection was conducted on the graphene/Ni hybrid mesh with the longest edge length. At a detection potential of 0.6 V, the edge-rich graphene/Ni hybrid mesh sensor exhibited a wide linear response range from 10.0 μM to 2.5 mM with a limit of detection of 1.8 μM and a high sensitivity of 1118.9 μA∙mM⁻¹∙cm⁻². Our findings suggest that edge-rich GMs can be valuable platforms in various graphene applications such as graphene-based EC sensors with controlled and improved performance.

Sarcosine Prostate Cancer Biomarker Detection by Controlling Oxygen in NiOx Membrane on Vertical Silicon Nanowires in Electrolyte-Insulator-Nanowire Structure

Sarcosine prostate cancer biomarker with the low concentration of 1 pM has been detected by controlling oxygen from 1 to 15 sccm in a NiO_x membrane on chemically etched vertical Si nanowires (SiNWs) in an electrolyte-insulator-nanowire (EIN) structure. The vertical Si nanowires with approximately 17 μm length and polycrystalline NiO_x membrane are observed by both field-emission scanning electron microscope (FE-SEM) and high-resolution transmission electron microscope (HRTEM) images, respectively. The optimized NiO_x membrane with oxygen content of 4 sccm on planar SiO_x/Si substrate shows good pH sensitivity of approximately 50 mV/pH, low hysteresis of 3.4 mV, and low drift rate of 2.4 mV/h as compared to other oxygen content membranes of 1, 10, and 15 sccm. Further, uric acid with the concentration of 0.1 μM is detected directly by using the optimized NiO_x membrane. In addition, repeatable H₂O₂ sensing with the low concentration of 10 pM as well as prostate cancer biomarker is detected, which is owing to the reduction-oxidation phenomena of the NiO_x membranes. The sensing mechanism is owing to the Ni²⁺/Ni³⁺ oxidation states of the NiO_x membrane, which is confirmed by X-ray photoelectron spectroscopy. The optimized NiO_x membrane on vertical Si nanowire in the EIN structure shows a good drift rate of 3.84 mV/h and sarcosine detection with improvement of approximately 1000 times as compared to the planar Si in an electrolyte-insulator-semiconductor (EIS) structure. This sensor paves a way to detect early-stage diagnosis of prostate cancer rapidly in the near future.

Emerging pnictogen-based 2D semiconductors: sensing and electronic devices

Pnictogens are an intensively studied group of monoelemental two-dimensional materials. This group of elements consists of phosphorus, arsenic, antimony, and bismuth. In this group, the elements adopt two different layered structural allotropes, orthorhombic structure with true van der Waals layered interactions and rhombohedral structure, where covalent interactions between layers are also present. The orthorhombic structure is well known for phosphorus and arsenic, and the rhombohedral structure is the most thermodynamically stable allotropic modification of arsenic, antimony, and bismuth. Due to the electronic structure of pnictogen layers and their semiconducting character, these materials have huge application potential for electronic devices such as transistors and sensors including photosensitive devices as well as gas and electrochemical sensors. While photodetection and gas sensing applications are often related to lithography processed materials, chemical sensing proceeds in a liquid environment (either aqueous or non-aqueous) and can be influenced by surface oxidation of these materials. In this review, we explore the current state of pnictogen applications in sensing and electronic devices including transistors, photodetectors, gas sensors, and chemical/electrochemical sensors.

Ultrasensitive Gas Sensors Based on Vertical Graphene Nanowalls/SiC/Si Heterostructure

Gas sensors, which play an important role in the safety of human life, cover a wide range of applications including intelligent systems and detection of harmful and toxic gases. It is known that graphene is an ideal and attractive candidate for gas sensing due to its high surface area and excellent mechanical, electrical, optical, and thermal properties. However, in order to fully realize its potential as a commercial gas sensor, demand for a graphene-based device of low-limit detection, high sensitivity, and fast response time needs to be met. Here, we demonstrate a metal/insulator/semiconductor (MIS) based gas sensor consisting of as-grown epitaxial graphene nanowalls (EGNWs)/silicon carbide (SiC)/silicon (Si) structure. The unique edge dominant three-dimensional (3D) EGNWs based MIS device achieved an extraordinarily low limit of detection (0.5 ppm) and unprecedented sensitivity (82 μA/ppm/cm² for H₂) with a fast response of shorter than 500 ms. These unique properties of our MIS device are attributed to the abundance of vertically oriented nanographitic edges and structural defects that act as extra-favorable adsorption sites and exhibit fast electron-transfer kinetics through the edges. Our experimental findings can pave the way for the realization of high-performance 3D graphene-based gas sensor devices.

Non-enzymatic glucose sensing by enhanced Raman spectroscopy on flexible ‘as-grown’ CVD graphene

Unmodified, as-grown few layer graphene (on copper) have been used for glucose sensing using Raman spectroscopy. The origin of the graphene enhanced Raman spectroscopy (GERS) signal of glucose is attributed to a charge transfer from glucose to graphene.