Switchable bioelectronics

Redox active plant phenolic, acetosyringone, for electrogenetic signaling

Redox is a unique, programmable modality capable of bridging communication between biology and electronics. Previous studies have shown that the E. coli redox-responsive OxyRS regulon can be re-wired to accept electrochemically generated hydrogen peroxide (H2O2) as an inducer of gene expression. Here we report that the redox-active phenolic plant signaling molecule acetosyringone (AS) can also induce gene expression from the OxyRS regulon. AS must be oxidized, however, as the reduced state present under normal conditions cannot induce gene expression. Thus, AS serves as a "pro-signaling molecule" that can be activated by its oxidation-in our case by application of oxidizing potential to an electrode. We show that the OxyRS regulon is not induced electrochemically if the imposed electrode potential is in the mid-physiological range. Electronically sliding the applied potential to either oxidative or reductive extremes induces this regulon but through different mechanisms: reduction of O2 to form H2O2 or oxidation of AS. Fundamentally, this work reinforces the emerging concept that redox signaling depends more on molecular activities than molecular structure. From an applications perspective, the creation of an electronically programmed "pro-signal" dramatically expands the toolbox for electronic control of biological responses in microbes, including in complex environments, cell-based materials, and biomanufacturing.

Gel-Based Luminescent Conductive Materials and Their Applications in Biosensors and Bioelectronics

The gel is an ideal platform for fabricating materials for bio-related applications due to its good biocompatibility, adjustable mechanical strength, and flexible and diversified functionalization. In recent decades, gel-based luminescent conductive materials that possess additional luminescence and conductivity simultaneously advanced applications in biosensors and bioelectronics. Herein, a comprehensive overview of gel-based luminescent conductive materials is summarized in this review. Gel-based luminescent conductive materials are firstly outlined, highlighting their fabrication methods, network structures, and functions. Then, their applications in biosensors and bioelectronics fields are illustrated. Finally, challenges and future perspectives of this emerging field are discussed with the hope of inspire additional ideas.

DNA Self-Switchable Microlaser

Advances in switchable microlasers have emerged as a building block with immense potential in controlling light-matter interactions and integrated photonics. Compared to artificially designed interfaces, a stimuli-responsive biointerface enables a higher level of functionalities and versatile ways of tailoring optical responses at the nanoscale. However, switching laser emission with biological recognition has yet to be addressed, particularly with reversibility and wavelength tunability over a broad spectral range. Here we demonstrate a self-switchable laser exploiting the biointerface between label-free DNA molecules and dye-doped liquid crystal matrix in a Fabry-Perot microcavity. Laser emission switching among different wavelengths was achieved by utilizing DNA conformation changes as the switching power, which alters the orientation of the liquid crystals. Our findings demonstrate that different concentrations of single-stranded DNA lead to different temporal switching of lasing wavelengths and intensities. The lasing wavelength could be reverted upon binding with the complementary sequence through DNA hybridization process. Both experimental and theoretical studies revealed that absorption strength is the key mechanism accounting for the laser shifting behavior. This study represents a milestone in achieving a biologically controlled laser, shedding light on the development of programmable photonic devices at the sub-nanoscale by exploiting the complexity and self-recognition of biomolecules.

Detection of the conformational changes of Discosoma red fluorescent proteins adhered on silver nanoparticles-based nanocomposites via surface-enhanced Raman scattering

Description of the relationship between protein structure and function remains a primary focus in molecular biology, biochemistry, protein engineering and bioelectronics. Moreover, the investigation of the protein conformational changes after adhesion and dehydration is of importance to tackle problems related to the interaction of proteins with solid surfaces. In this paper the conformational changes of wild-type Discosoma recombinant red fluorescent proteins (DsRed) adhered on silver nanoparticles (AgNPs)-based nanocomposites are explored via surface-enhanced Raman scattering (SERS). Originality in the present approach is to work on dehydrated DsRed thin protein layers in link with natural conditions during drying. To enable the SERS effect, plasmonic substrates consisting of a single layer of AgNPs encapsulated by an ultra-thin silica cover layer were elaborated by plasma process. The achieved enhancement of the electromagnetic field in the vicinity of the AgNPs is as high as 105. This very strong enhancement factor allowed detecting Raman signals from discontinuous layers of DsRed issued from solution with protein concentration of only 80 nM. Three different conformations of the DsRed proteins after adhesion and dehydration on the plasmonic substrates were identified. It was found that the DsRed chromophore structure of the adsorbed proteins undergoes optically assisted chemical transformations when interacting with the optical beam, which leads to reversible transitions between the three different conformations. The proposed time-evolution scenario endorses the dynamical character of the relationship between protein structure and function. It also confirms that the conformational changes of proteins with strong internal coherence, like DsRed proteins, are reversible.

Bioinspired Flexible Volatile Organic Compounds Sensor Based on Dynamic Surface Wrinkling with Dual-Signal Response

Living systems can respond to external stimuli by dynamic interface changes. Moreover, natural wrinkle structures allow the surface to switch dynamically and reversibly from flat to rough in response to specific stimuli. Artificial wrinkle structures have been developed for applications such as optical devices, mechanical sensors, and microfluidic devices. However, chemical molecule-triggered flexible sensors based on dynamic surface wrinkling have not been demonstrated. Inspired by human skin wrinkling, herein, a volatile organic compound (VOC)-responsive flexible sensor with a switchable dual-signal response (transparency and resistance) is achieved based on a multilayered Ag nanowire (AgNW)/SiO_x /polydimethylsiloxane (PDMS) film. Wrinkle structures can form dynamically in response to VOC vapors (such as ethanol, toluene, acetone, formaldehyde, and methanol) due to the instability of the multilayer induced by their different swelling capabilities. By controlling the modulus of PDMS and the thickness of the SiO_x layer, tunable sensitivities in resistance and transparency of the device are achieved. Additionally, the proximity mechanism of the solubility parameter is proposed, which explains the high selectivity of the device toward ethanol vapor compared with that of other VOCs well. This stimuli-responsive sensor exhibits the dynamic visual feedback and the quantitative electrical signal, which provide a novel approach for developing smart flexible electronics.

Adsorption properties of BSA and DsRed proteins deposited on thin SiO2 layers: optically non-absorbing versus absorbing proteins

Protein adsorption on solid surfaces is of interest for many industrial and biomedical applications, where it represents the conditioning step for micro-organism adhesion and biofilm formation. To understand the driving forces of such an interaction we focus in this paper on the investigation of the adsorption of bovine serum albumin (BSA) (optically non-absorbing, model protein) and DsRed (optically absorbing, naturally fluorescent protein) on silica surfaces. Specifically, we propose synthesis of thin protein layers by means of dip coating of the dielectric surface in protein solutions with different concentrations (0.01-5.0 g l^-1). We employed spectroscopic ellipsometry as the most suitable and non-destructive technique for evaluation of the protein layers' thickness and optical properties (refractive index and extinction coefficient) after dehydration, using two different optical models, Cauchy for BSA and Lorentz for DsRed. We demonstrate that the thickness, the optical properties and the wettability of the thin protein layers can be finely controlled by proper tuning of the protein concentration in the solution. These results are correlated with the thin layer morphology, investigated by AFM, FTIR and PL analyses. It is shown that the proteins do not undergo denaturation after dehydration on the silica surface. The proteins arrange themselves in a lace-like network for BSA and in a rod-like structure for DsRed to form mono- and multi-layers, due to different mechanisms driving the organization stage.

Poly(styrenesulfonate)-Modified Ni-Ti Layered Double Hydroxide Film: A Smart Drug-Eluting Platform

Drug-eluting stents (DESs) are widely used in the palliative treatment of many kinds of cancers. However, the covered polymers used in DESs are usually associated with stent migration and acute cholecystitis. Therefore, developing noncovered drug-loading layers on metal stents is of great importance. In this work, Ni-Ti layered double hydroxide (Ni-Ti LDH) films were prepared on the surface of nitinol via hydrothermal treatment, and the LDH films were further modified by poly(styrenesulfonate) (PSS). The anticancer drug doxorubicin could be effectively loaded onto the modified films, and drug release could be smartly controlled by the pH. Besides, the drug absorption amounts of cancer cells cultured on the films could be effectively improved. These results indicate that the PSS-modified LDH film may become a promising drug-loading platform that can be used in the design of DESs.

Programmable bioelectronics in a stimuli-encoded 3D graphene interface

The ability to program and mimic the dynamic microenvironment of living organisms is a crucial step towards the engineering of advanced bioelectronics. Here, we report for the first time a design for programmable bioelectronics, with 'built-in' switchable and tunable bio-catalytic performance that responds simultaneously to appropriate stimuli. The designed bio-electrodes comprise light and temperature responsive compartments, which allow the building of Boolean logic gates (i.e."OR" and "AND") based on enzymatic communications to deliver logic operations.

Acetylene-sourced CVD-synthesised catalytically active graphene for electrochemical biosensing

In this study, we have demonstrated the use of chemical vapour deposition (CVD) grown-graphene to develop a highly-ordered graphene-enzyme electrode for electrochemical biosensing. The graphene sheets were deposited on 1.00mm thick copper sheet at 850°C using acetylene (C₂H₂) as carbon source in an argon (Ar) and nitrogen (N₂) atmosphere. An anionic surfactant was used to increase wettability and hydrophilicity of graphene; thereby facilitating the assembly of biomolecules on the electrode surface. Meanwhile, the theoretical calculations confirmed the successful modification of hydrophobic nature of graphene through the anionic surface assembly, which allowed high-ordered immobilisation of glucose oxidase (GOx) on the graphene. The electrochemical sensing activities of the graphene-electrode was explored as a model for bioelectrocatalysis. The bioelectrode exhibited a linear response to glucose concentration ranging from 0.2 to 9.8mM, with sensitivity of 0.087µA/µM/cm² and a detection limit of 0.12µM (S/N=3). This work sets the stage for the use of acetylene-sourced CVD-grown graphene as a fundamental building block in the fabrication of electrochemical biosensors and other bioelectronic devices.

Switchable Bioelectrocatalysis Controlled by Dual Stimuli-Responsive Polymeric Interface

The engineering of bionanointerfaces using stimuli-responsive polymers offers a new dimension in the design of novel bioelectronic interfaces. The integration of electrode surfaces with stimuli-responsive molecular cues provides a direct control and ability to switch and tune physical and chemical properties of bioelectronic interfaces in various biodevices. Here, we report a dual-responsive biointerface employing a positively responding dual-switchable polymer, poly(NIPAAm-co-DEAEMA)-b-HEAAm, to control and regulate enzyme-based bioelectrocatalysis. The design interface exhibits reversible activation-deactivation of bioelectrocatalytic reactions in response to change in temperature and in pH, which allows manipulation of biomolecular interactions to produce on/off switchable conditions. Using electrochemical measurements, we demonstrate that interfacial bioelectrochemical properties can be tuned over a modest range of temperature (i.e., 20-60 °C) and pH (i.e., pH 4-8) of the medium. The resulting dual-switchable interface may have important implications not only for the design of responsive biocatalysis and on-demand operation of biosensors, but also as an aid to elucidating electron-transport pathways and mechanisms in living organisms by mimicking the dynamic properties of complex biological environments and processes.

pH-induced on/off-switchable graphene bioelectronics

Switchable interfaces can deliver functionally reversible reactivity with their corresponding analytes, which allows one to positively respond to the activity of biological elements, including enzymes and other biomolecules, through an encoded stimulus.