Electrochemical aptasensor for the detection of adenosine by using PdCu@MWCNTs-supported bienzymes as labels

An electrochemical aptasensor based on multi-walled carbon nanotubes loaded with PtCu nanoparticles as signal label for ultrasensitive detection of adenosine

Adenosine, as an endogenous nucleoside modulator, plays an important role in heart rate regulation, neurotransmission, and control of the respiratory system and thus it is significantly important to realize its sensitive detection. Herein, a highly sensitive electrochemical aptasensor for adenosine detection was proposed by using multi-walled carbon nanotubes (MWCNTs) as support matrix loading PtCu nanoparticles (PtCu-MWCNTs) to amplify signal. On one hand, disposable screen-printing gold electrodes (SPGEs) were used as superb sensing base to ensure the stable connection of aptamers 1 (ssDNA1). On the other hand, the PtCu-MWCNTs complex was synthesized through a one-pot method, which not only can precisely control the proportion of metal mass in the product but also exhibited superior electrocatalytic activity towards H₂O₂. The recognition reactions were achieved by stepwise incubation of ssDNA1, ssDNA2-PtCu-MWCNTs (denoted as ssDNA2-label), and adenosine on the SPGEs. As a result, the constructed electrochemical aptasensor exhibited a wide linear range from 10 nM to 1.0 μM with a low detection limit of 1.0 nM (S/N = 3) for adenosine detection. The aptasensor also successfully realized the adenosine detection in human serum samples, which means that the proposed aptasensor holds a potential application in point-of-care detection.

Carbon-Based Electrochemical Sensors for In Vivo and In Vitro Neurotransmitter Detection

As essential neurological chemical messengers, neurotransmitters play an integral role in the maintenance of normal mammalian physiology. Aberrant neurotransmitter activity is associated with a range of neurological conditions including Parkinson's disease, Alzheimer's disease, and Huntington's disease. Many studies to date have tested different approaches to detecting neurotransmitters, yet the detection of these materials within the brain, due to the complex environment of the brain and the rapid metabolism of neurotransmitters, remains challenging and an area of active research. There is a clear need for the development of novel neurotransmitter sensing technologies capable of rapidly and sensitively monitoring specific analytes within the brain without adversely impacting the local microenvironment in which they are implanted. Owing to their excellent sensitivity, portability, ease-of-use, amenability to microprocessing, and low cost, electrochemical sensors methods have been widely studied in the context of neurotransmitter monitoring. The present review, thus, surveys current progress in this research field, discussing developed electrochemical neurotransmitter sensors capable of detecting dopamine (DA), serotonin (5-HT), acetylcholine (Ach), glutamate (Glu), nitric oxide (NO), adenosine (ADO), and so on. Of these technologies, those based on carbon nanostructures-modified electrodes including carbon nanotubes (CNTs), graphene (GR), gaphdiyne (GDY), carbon nanofibers (CNFs), and derivatives thereof hold particular promise owing to their excellent biocompatibility and electrocatalytic performance. The continued development of these and related technologies is, thus, likely to lead to major advances in the clinical diagnosis of neurological diseases and the detection of novel biomarkers thereof.

Carbon dots-sensitized amorphous MoSx photoanode: Sequential electrodeposition preparation and dual amplified photoelectrochemical aptasensing of adenosine

The design and fabrication of high visible-light activated photoelectrode are essential to precisely detect biomolecule in biological system. Herein, an ultrasensitive photoelectrochemical (PEC) aptasensor for specific recognition of adenosine is established based on carbon dots sensitized-amorphous molybdenum sulfide (a-MoS_x/CDs) photoanode and dual amplification strategy. The heterostructured photoanode achieved by sequential electrodeposition reveals significantly boosted photocurrent with good stability and repeatability under visible light illumination, giving the credit to highly activated visible light absorption, uniform coverage and good electric contact to the underlying substrate, as well as the energy-band alignment between the two components. By stepwisely immobilizing complementary DNA probe (NH₂-DNA) and adenosine aptamer (Apt), followed by methylene blue (MB) binding with the guanine base on Apt, a dual amplified self-powered PEC aptasensor for adenosine detection is constructed. Based on the co-sensitization effect of CDs and MB, ultrasensitive and high-affinitive determination of adenosine is realized over the concentration range of 0.01 nM-1000 nM at 0 V (vs. SCE), with satisfactory stability and reproducibility. The detection limit is as low as 3.3 pM, demonstrating a performance even surpassing most of the sensors reported so far. The prospective application of the co-sensitized a-MoS_x photoanode for ultrasensitive aptasensing is highlighted in this work.

Colorimetric adenosine assay based on the self-assembly of aptamer-functionalized gold nanorods

A colorimetric method is presented for ultrasensitive determination of adenosine. The assay is based on side-by-side self-assembly of aptamer-functionalized gold nanorods (Au NRs). It relies on the fact that the conjugation of the helper DNA predominantly occurs at the terminal ends of the Au NRs rather than at their sides. The adenosine aptamers consist of two pieces of ssDNA (termed C1 and C2) that were individually attached to the sides of Au NRs. In the presence of adenosine, it will be captured by C1 and C2 to form a stable sandwich structure. As a result, a side-to-side assembly of the Au NRs occurs. If the adenosine concentration is increased, the absorbance of the Au NRs at 742 nm gradually decreases, and the color changes from brick red to dark brown. Response is linear range in the 10 pM to 5 nM adenosine concentration range, and the detection limit is as low as 3.3 pM. Adenosine analogues such as uridine and cytidine do not interfere. The method was used to quantify adenosine in serum samples at concentrations as low as 10 pM. Graphical abstractSchematic representation of an effective colorimetric method for adenosine detection based on target adenosine-induced side-by-side self-assembly of gold nanorods (Au NRs).

A visible light photoelectrochemical sandwich aptasensor for adenosine triphosphate based on MgIn2S4-TiO2 nanoarray heterojunction

This work designed a MgIn₂S₄-TiONA heterojunction by growing MgIn₂S₄ nanoplates on TiO₂ nanowire array (TiONA) for preparation of visible light photoelectrochemical (PEC) sensing platform. The heterojunction exhibited strong absorption of visible light, large surface area and high loading of biomolecules, leading to high sensing sensitivity. Using adenosine triphosphate (ATP), a marker of cell vitality, as the target model, a PEC sandwich aptasensor was constructed by immobilizing capture DNA₁ on MgIn₂S₄ surface. In the presence of ATP and signal DNA₂ with terminal ferrocene as the electron donor, a sandwiched DNA₁-ATP-DNA₂ complex could be formed on the PEC aptasensor. The aptasensor showed excellent performance with a wide linear range from 50 fM to 100 nM and a detection limit of 20 fM. The sensing performance including specificity, reproducibility, stability and practical use were also evaluated, showing promising application of the MgIn₂S₄-TiONA heterojunction in PEC biosensing.

Electrochemical aptamer-based microsensor for real-time monitoring of adenosine in vivo

In this work, an implantable and minimally invasive micro-aptasensor for adenosine monitoring in vivo, based on flexible integrated electrodes, was developed. Firstly the sensor was made by the modification of a needle-type electrode with reduced graphene oxide and gold nanoclusters (rGO-AuNCs) using two-step electrodeposition. Secondly Sulfhydryl-terminated capture probe (ssDNA1) was immobilized on rGO-AuNCs modified electrode surface by self-assembly, and then it was hybridized with adenosine aptamer (ssDNA2). Lastly methylene blue (MB) as an electrochemical indicator was adsorbed on the aptamer through specific interaction of MB with guanine base. The peak current of MB decreased linearly with increasing adenosine concentration due to the formation of aptamer-adenosine complex and displacement of the aptamer from the modified electrode surface. The sensor showed a low detection limit of 0.1 nM with signal-to-noise ratio equal to 3 as well as a wide linear response range (0.1 nM-1 mM) in vitro. Also, a high selectivity was demonstrated for adenosine in relation to uridine, guanosine, and cytidine. Experiments in vivo demonstrated fast responses for a range of adenosine concentrations. This work demonstrates a promising path for implantable devices for the determination of biomolecules in vivo, thus allowing for health tests, detection of infectious diseases, and other medical conditions.

Advances in the design of nanomaterial-based electrochemical affinity and enzymatic biosensors for metabolic biomarkers: A review

This review (with 340 refs) focuses on methods for specific and sensitive detection of metabolites for diagnostic purposes, with particular emphasis on electrochemical nanomaterial-based sensors. It also covers novel candidate metabolites as potential biomarkers for diseases such as neurodegenerative diseases, autism spectrum disorder and hepatitis. Following an introduction into the field of metabolic biomarkers, a first major section classifies electrochemical biosensors according to the bioreceptor type (enzymatic, immuno, apta and peptide based sensors). A next section covers applications of nanomaterials in electrochemical biosensing (with subsections on the classification of nanomaterials, electrochemical approaches for signal generation and amplification using nanomaterials, and on nanomaterials as tags). A next large sections treats candidate metabolic biomarkers for diagnosis of diseases (in the context with metabolomics), with subsections on biomarkers for neurodegenerative diseases, autism spectrum disorder and hepatitis. The Conclusion addresses current challenges and future perspectives. Graphical abstract This review focuses on the recent developments in electrochemical biosensors based on the use of nanomaterials for the detection of metabolic biomarkers. It covers the critical metabolites for some diseases such as neurodegenerative diseases, autism spectrum disorder and hepatitis.

A turn-on chemiluminescence biosensor for selective and sensitive detection of adenosine based on HKUST-1 and QDs-luminol-aptamer conjugates

In this work, HKUST-1 and QDs-luminol-aptamer conjugates were prepared. The QDs-luminol-aptamer conjugates can be adsorbed by graphene oxide through π-π conjugation. When the adenosine was added, the QDs-luminol-aptamer conjugates were released from magnetic graphene oxide (MGO), the chemiluminescent switch was turned on. It was reported that HKUST-1 can catalyze the chemiluminescence reaction of luminol-H₂O₂ system in an alkaline medium, and improve the chemiluminescence resonance energy transfer (CRET) between chemiluminescence and QDs indirectly. Thus, the adenosine can be detected sensitively. Based on this phenomenon, the excellent platform for detection of adenosine was established. Under the optimized conditions, the linear detection range for adenosine was 1.0 × 10^-12-2.2 × 10^-10 mol/L with a detection limit of 2.1 × 10^-13 mol/L. The proposed method was successfully used for adenosine detection in biological samples.

Voltammetric sensing based on the use of advanced carbonaceous nanomaterials: a review

This review (with 210 references) summarizes recent developments in the design of voltammetric chemical sensors and biosensors based on the use of carbon nanomaterials (CNMs). It is divided into subsections starting with an introduction into the field and a description of its current state. This is followed by a large section on various types of voltammetric sensors and biosensors using CNMs with subsections on sensors based on the use of carbon nanotubes, graphene, graphene oxides, graphene nanoribbons, fullerenes, ionic liquid composites with CNMs, carbon nanohorns, diamond nanoparticles, carbon dots, carbon nanofibers and mesoporous carbon. The third section gives conclusion and an outlook. Tables are presented on the application of such sensors to voltammetric detection of neurotransmitters, metabolites, dietary minerals, proteins, heavy metals, gaseous molecules, pharmaceuticals, environmental pollutants, food, beverages, cosmetics, commercial goods and drugs of abuse. The authors also describe advanced approaches for the fabrication of robust functional carbon nano(bio)sensors for voltammetric quantification of multiple targets. Graphical Abstract Featuring execellent electrical, catalytic and surface properies, CNMs have gained enormous attention for designing voltammetric sensors and biosensors. Functionalized CNM-modified electrode interfaces have demonstrated their prominent role in biological, environmental, pharmaceutical, chemical, food and industrial analysis.

High sensitivity surface plasmon resonance biosensor for detection of microRNA and small molecule based on graphene oxide-gold nanoparticles composites

A versatile and sensitive surface plasmon resonance (SPR) biosensor based on two layers of graphene oxide-gold nanoparticles (GO-AuNPs) composites was designed for the detection of microRNA (miRNA) and small molecule adenosine. The bottom layer, which acted as a functionalized substrate on the sensor chip, provided a high specific surface area convenient for the immobilization of capture DNA molecules. The upper layer served as a signal-amplification element. By employing these two layers of GO-AuNPs composites, the dual amplification strategy was achieved so that a measurement of miRNA-141 with a detection limit of 0.1fM was obtained. Moreover, the developed SPR biosensor showed decent selectivity toward miRNA-200 family members. Especially, the SPR biosensor demonstrated its applicability for the detection of miRNA-141 in cancer cell extractions, and the results obtained were consistent with those obtained by qRT-PCR. Interestingly, small molecule adenosine could also be detected using this SPR biosensor in combination with a split aptamer. Considering the superior sensitivity, selectivity and generality, this work promised much potential for the detection of various biomolecules.

G-quadruplex based Exo III-assisted signal amplification aptasensor for the colorimetric detection of adenosine

Adenosine is an endogenous nucleotide pivotally involved in nucleic acid and energy metabolism. Its excessive existence may indicate tumorigenesis, typically lung cancer. Encouraged by its significance as the clinical biomarker, sensitive assay methods towards adenosine have been popularized, with high cost and tedious procedures as the inevitable defects. Herein, we report a label-free aptamer-based exonuclease III (Exo III) amplification colorimetric aptasensor for the highly sensitive and cost-effective detection of adenosine. The strategy employed two unlabeled hairpin DNA oligonucleotides (HP1 and HP2), where HP1 contained the aptamer towards adenosine and HP2 embedded the guanine-rich sequence (GRS). In the presence of adenosine, hairpin HP1 could form specific binding with adenosine and trigger the unfolding of HP1's hairpin structure. The resulting adenosine-HP1 complex could hybridize with HP2, generating the Exo III recognition site. After Exo III-assisted degradation, the GRS was released from HP2, and the adenosine-HP1 was released back to the solution to combine another HP2, inducing the cycling amplification. After multiple circulations, the released ample GRSs were induced to form G-quadruplex, further catalyzing the oxidation of TMB, yielding a color change which was finally mirrored in the absorbance change. On the contrary, the absence of adenosine failed to unfold HP1, remaining color unchanged eventually. Thanks to the amplification strategy, the limit of detection was lowered to 17 nM with a broad linear range from 50 nM to 6 μM. The proposed method was successfully applied to the detection of adenosine in biological samples and satisfying recoveries were acquired.

Instrument-free quantitative gold nanoparticle-based liquid-phase colorimetric assays for use in resource-poor environments

This work describes a new class of gold nanoparticle-based liquid-phase colorimetric assay (GNP-LPCA) termed as two dimensional (2D) GNP-LPCA that enables quantitative detection of model analytes with naked eye.

Label-free electrochemical aptasensor for adenosine detection based on cascade signal amplification strategy

In this work, a simple and highly sensitive label-free electrochemical aptasensor for adenosine detection was developed based on target-aptamer binding triggered nicking endonuclease-assisted strand-replacement DNA polymerization and rolling circle amplification (RCA) strategy. The magnetic beads (MB) probe, which was attached the aptamer of adenosine and mDNA, was firstly fabricated. In the presence of adenosine, mDNA was released from MB upon recognition of the aptamer to target adenosine. The released mDNA as the primer activated autonomous DNA polymerization/nicking process and accompanied by the continuous release of replicated DNA fragments. Subsequently, numerous released DNA fragments were captured on the working electrode, and then as initiators to trigger the downstream RCA process leading to the formation of a long ssDNA concatemer for loading large amounts of Ru(NH₃)₆³⁺. Therefore, a conspicuously amplified electrochemical signal through the developed dual-amplification strategy could be achieved. This method exhibited a high sensitivity toward adenosine with a detection limit of 0.032nM. Also, it exhibited high selectivity to different nucleoside families and good reproducibility. This design opens new horizons for integrating different disciplines, presenting a versatile tool for ultrasensitive detecting organic small molecules in medical research and clinical diagnosis.

Ultrasensitive electrochemical aptasensor for the detection of thrombin based on dual signal amplification strategy of Au@GS and DNA-CoPd NPs conjugates

In this work, an ultrasensitive electrochemical aptasensor for the detection of thrombin was developed based on Au nanoparticles decorated graphene sheet (Au@GS) and CoPd binary nanoparticles (CoPd NPs). A sulfydryl-labeled thrombin capture probe (Apt1) and a biotin-labeled thrombin reporter probe (Apt2) were designed to achieve a sandwich-type strategy. Au@GS was used as a sensing platform for the facile immobilization of Apt1 through Au-S bond, forming a sensing interface for thrombin. The specific recognition of thrombin induced the attachment of Apt2-CoPd NPs to the electrode. The labeled CoPd NPs showed good catalytic properties toward the reduction of H2O2, resulting in an amperometric signal. The amperometric response was correlated to the thrombin concentration in sample solutions. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) confirmed the successful fabrication of the aptasensor. A linear response to thrombin in the range of 0.01-2.00 ng mL(-1) with a low detection limit (5 pg mL(-1)) was achieved. The proposed aptasensor showed good selectivity, good reproducibility and acceptable stability. This proposed strategy may find many potential applications in the detection of other biomolecules.

A novel label-free aptasensor based on target-induced structure switching of aptamer-functionalized mesoporous silica nanoparticles

A strategy for high-performance liquid chromatography detection of adenosine triphosphate was developed based on mesoporous silica nanoparticles functionalized with an aptamer as a cap.