Label-free, sensitivity detection of fibrillar fibrin using gold nanoparticle-based chemiluminescence system

The outputs of molecular sensors detectable by human senses

Molecular sensors respond to the presence of biological analytes by producing signals that are either directly perceivable by human sensory systems or converted into electric signals, which require electronic devices for communicating the signals to humans. Here, we review the outputs of molecular sensors detectable directly by human senses. According to the literature, sensors with visual outputs dominate. Undeservedly unnoticed, sensors that release gases might be particularly useful since the gas output can be detected with the several human senses in a quantifiable format. Relatively new sensors with tactile outputs can be accessed by visually impaired people. Molecular sensors communicating their outputs directly to human senses bypassing electronic devices may contribute to the development of point-of-care testing technologies, as well as providing the direct communication of molecular nanorobots with humans.

A two-step electrochemical biosensor based on Tetrazyme for the detection of fibrin

In this study, an electrochemical biosensor was constructed for the detection of fibrin, specifically by a simple two-step approach, with a novel artificial enzyme (Tetrazyme) based on the DNA tetrahedral framework as signal probe. The multichannel screen-printed electrode with the activated surface cannot only remove some biological impurities, but also serve as a carrier to immobilize a large number of antigen proteins. The DNA tetrahedral nanostructure was employed to ensure the high sensitivity of the probe for biological analysis. The hemin was chimeric into the G-quadruplex to constitute the complex with peroxidase catalytic activity (hemin/G4-DNAzyme), subsequently, Tetrazyme was formed through combining of this complex and DNA tetrahedral nucleic acid framework. The artificial enzyme signal probe formed by the covalent combination of the homing peptide (Cys-Arg-Glu-Lys-Ala, CREKA), which is the aptamer of fibrin and the new artificial enzyme is fixed on the surface of the multichannel carbon electrode by CREKA-specific recognition, so as to realize the sensitive detection of fibrin. The feasibility of sensing platform was validated by cyclic voltammetry (CV) and amperometric i-t curve (IT) methods. Effects of Tetrazyme concentration, CREKA concentrations and hybridization time on the sensor were explored. Under the best optimal conditions of 0.6 μmol/L Tetrazyme, 80 μmol/L CREKA, and 2.5 h reaction time, the immunosensor had two linear detection ranges, 10-40 nmol/L, with linear regression equation Y = 0.01487X - 0.011 (R2 = 0.992), and 50-100 nmol/L, with linear regression equation Y = 0.00137X + 0.6405 (R2 = 0.998), the detection limit was 9.4 nmol/L, S/N ≥ 3. The biosensor could provide a new method with great potential for the detection of fibrin with good selectivity, stability, and reproducibility.

Cu/Au nanoclusters with peroxidase-like activity for chemiluminescence detection of α-amylase

Herein, a novel chemiluminescence method was developed for efficient and sensitive detection of α-amylase activity. α-Amylase is closely related to our life, and α-amylase concentration is a marker for the diagnosis of acute pancreatitis. In this paper, Cu/Au nanoclusters with peroxidase-like activity were prepared using starch as a stabilizer. Cu/Au nanoclusters can catalyze H₂O₂ to generate reactive oxygen species and increase the CL signal. The addition of α-amylase makes the starch decompose and causes the nanoclusters to aggregate. The aggregation of the nanoclusters caused them to increase in size and decrease in the peroxidase-like activity, resulting in a decrease in the CL signal. α-Amylase was detected by the CL method of signal changes caused by dispersion-aggregation in the range of 0.05-8 U mL^-1 with a low detection limit of 0.006 U mL^-1. The chemiluminescence scheme based on the luminol-H₂O₂-Cu/Au NC system is of great significance for the sensitive and selective determination of α-amylase in real samples, and the detection time is short. This work provides new ideas for the detection of α-amylase based on the chemiluminescence method and the signal lasts for a long time, which can realize timely detection.

Development of lucigenin-N-hydroxyphthalimide chemiluminescence system and its application to sensitive detection of Co2

N-hydroxyphthalimide (NHPI) is an efficient organic catalyst and an important chemical raw material which can be used as an intermediate in organic synthesis of drugs and pesticides. In this study, NHPI has been used as a coreactant of lucigenin chemiluminescence (CL) for the first time. The CL of the developed system is significantly enhanced in the presence of Co²⁺. Therefore, we developed a novel lucigenin-NHPI CL method coupled with flow injection analysis for the sensitive, precise, and selective determination of Co²⁺. The linear range of this method is 1-1000 nM, and the detection limit is 67 pM (S/N = 3). In addition, this method has a good selectivity for Co²⁺. It has been applied to the detection of Co²⁺ in lake water, and the standard recovery rate is 95.9-103.2%, indicating that the method is feasible.

Homing peptide combined with DNAzyme-based ELISA-like assay for highly specific and sensitive detection of fibrin

A highly sensitive and specific ELISA-like chemiluminescence method for detection of fibrin has been developed. In the sensing platform, the homing peptide (CREKA), as recognition molecule, which can specially recognize the fibrin on microtiter plate, combined with G-quadruplex-based DNAzyme to form the probe of G-quadruplex-hemin DNAzyme-CREKA. After the sample solution was coated on the plates, the probe was crosslinked with fibrin through the interaction of CREKA and fibrin. Finally, luminol-H₂O₂ chemiluminesecence (CL) reaction was exploited for quantitative analysis of fibrin. The liner range for fibrin detection was from 0.112 pmol L^-1 to 5.6 pmol L^-1 with the detection limit of fibrin as low as 0.04 pmol L^-1, based on a signal-to-noise ratio (S/N) of 3. Furthermore, on the basis of the high amplification efficiency of the rolling circle amplification (RCA) reaction, the method enabled to analyze fibrin with a detection limit corresponding to 0.06 fmol L^-1, whose sensitivity increased 3 orders of magnitude than that of above method in the absence of RCA reaction. In particular, combined with the separation and washing steps of ELISA, the proposed method possessed higher selectivity, high-throughput and low cost, which shows promise for applications in clinical diagnosis.

Microfluidic paper device with on-site heating to produce reactive peroxide species for enhanced smartphone enabled chemiluminescence signal

Chemiluminescence signal amplification (CLSA) is of huge interest because of its sensitive detection in various applications such as food analysis, biomedical diagnosis and environmental monitoring. Due to this, there is a manifold attention to develop rapidly prototyped and miniaturized devices for CLSA. In this context, herein, a novel CLSA approach is demonstrated on a 3D printed microfluidic paper-based analytical device (μPADs), fabricated using Fused deposition modeling (FDM) printing technology. Influence of working temperature, ranging 30 °C-110 °C, on CL signal generation from well-established Luminol/Co⁺² - H₂O₂ reaction was analyzed using a screen-printed flexible heater onto the 3D printed reaction platform. A smartphone-based capturing/detection system provided the amenability for a point-of-care testing system. For the first time, strong and stable CLSA was found with about 255% ± 5% increase in its signal intensity without using any additional external enhancers. The on-site working temperature was directly in proportional to the intensity of CL signal generated from Luminol/Co⁺² - H₂O₂ reaction under optimum conditions, wherein the device had a wide linear range from 50 nM to 1 μM with a detection limit of 35 nM for H₂O₂ detection. The reliability of the developed amplification method was tested for practicability to detect the concentration of H₂O₂ in milk as real sample analysis. Overall, such CLSA mechanism in miniaturized μPADs will have strong potential for multiple CL based detection and monitoring application.

Integration of 3D Hydrodynamic Focused Microreactor with Microfluidic Chemiluminescence Sensing for Online Synthesis and Catalytical Characterization of Gold Nanoparticles

Chemiluminescence assays have shown great advantages compared with other optical techniques. Gold nanoparticles have drawn much attention in chemiluminescence analysis systems as an enzyme-free catalyst. The catalytic activity of gold nanoparticles for chemiluminescence sensing depends on size, shape and the surface charge property, which is hard to characterize in batches. As there is no positive or negative correlation between chemiluminescence signals and sizes of gold nanoparticles, the best way to get optimal gold nanoparticles is to control the reaction conditions via online chemiluminescence sensing systems. Therefore, a new method was developed for online synthesis of gold nanoparticles with a three-dimension hydrodynamic focusing microreactor, directly coupled with a microfluidic chemiluminescence sensing chip, which was coupled to a charge-coupled device camera for direct catalytical characterization of gold nanoparticles. All operations were performed in an automatic way with a program controlled by Matlab. Gold nanoparticles were synthesized through a single-phase reaction using glucose as a reducing agent and stabilizer at room temperature. The property of gold nanoparticles was easily controlled with the three-dimension microreactor during synthesis. The catalyst property of synthesized gold nanoparticles was characterized in a luminol-NaOCl chemiluminescence system. After optimizing parameters of synthesis, the chemiluminescence signal was enhanced to a factor of 171. The gold nanoparticles synthesized under optimal conditions for the luminol-NaOCl system were stable for at least one month. To further investigate the catalytic activity of synthesized gold nanoparticles in various situations, two methods were used to change the property of gold nanoparticles. After adding a certain amount of salt (NaCl), gold nanoparticles aggregated with a changed surface charge property and the catalytic activity was greatly enhanced. Glutathione was used as an example of molecules with thiol groups which interact with gold nanoparticles and reduce the catalytic activity. The chemiluminescence intensity was reduced by 98.9%. Therefore, we could show that using a microreactor for gold nanoparticles synthesis and direct coupling with microfluidic chemiluminescence sensing offers a promising monitoring method to find the best synthesis condition of gold nanoparticles for catalytic activity.

Detection of ascorbic acid based on its quenching effect on luminol-artemisinin chemiluminescence

We find that luminol can react with artemisinin (ART) to produce chemiluminescence (CL) in the absence of a catalyst and ascorbic acid (AA) can quench luminol-ART CL. Based on its efficient inhibition effect on luminol-ART CL, a new AA detection method is established. The calibration curve for the determination of AA is in the linear range of 5 × 10^-7 M to 1 × 10^-4 M with a detection limit of 50 nM, which is more sensitive than many other reported methods. This CL approach was utilized to detect AA in vitamin C tablets by applying the standard addition method, and the recoveries of 104.0%, 96.8% and 103.4% were obtained, respectively, at concentrations of 1 μM, 5 μM and 10 μM with a RSD value of less than 3.6%. This developed method for AA assay is distinguished by its fastness, reproducibility, easy operation and good selectivity.

Nanomaterial-enhanced chemiluminescence reactions and their applications

Chemiluminescence (CL) analysis is a trace analytical method that possesses advantages including high sensitivity, wide linear range, easy operation, and simple instruments. With the development of nanotechnology, many nanomaterial (NM)-enhanced CL systems have been established in recent years and applied for the CL detection of metal ions, anions, small molecules, tumor markers, sequence-specific DNA, and RNA. This review summarizes the research progress of the nanomaterial-enhanced CL systems the past five years. These CL reactions include luminol, peroxyoxalate, lucigenin, ultraweak CL reactions, and so on. The CL mechanisms of the nanomaterial-enhanced CL systems are discussed in the first section. Nanomaterials take part in the CL reactions as the catalyst, CL emitter, energy acceptor, and reductant. Their applications are summarized in the second section. Finally, the challenges and opportunities are discussed.

A highly selective and sensitive detection of insulin with chemiluminescence biosensor based on aptamer and oligonucleotide-AuNPs functionalized nanosilica @ graphene oxide aerogel

A novel, highly selective and sensitive chemiluminescence (CL) biosensor for insulin (INS) detection was proposed based on aptamer and oligonucleotide-gold nanoparticles functionalized nanosilica @ graphene oxide aerogel. Initially, nanosilica functionalized graphene oxide aerogel (SiO₂@GOAG) was successfully prepared and the composite showed rich pore distribution, large specific surface area and good biocompatibility. Insulin aptamer (IGA3) was used as a biorecognition element and oligonucleotide functionalized gold nanoparticles (ssDNA-AuNPs) was used as CL signal amplification materials, which were functionalized on the surface of SiO₂@GOAG. The multi-functionalized composite - ssDNA-AuNPs/IGA3/SiO₂@ GOAG was obtained and used to construct the CL biosensor for insulin detection. When insulin is present in a sample, the insulin will bind to the IGA3, which will result in the release of ssDNA-AuNPs. The released ssDNA-AuNPs would catalyze the luminescence of luminol and H₂O₂. The linear range of the CL biosensor for insulin detection was 7.5 × 10^-12 to 5.0 × 10^-9 moL/L and the detection limit was 1.6 × 10^-12 moL/L (S/N = 3). The selectivity and stability of the CL biosensor were also studied and the results showed that the biosensor exhibited high selectivity and good stability due to the introduction of ssDNA-AuNPs/IGA3/SiO₂@GOAG. The CL biosensor was finally used for recombinant human insulin detection in recombinant human insulin injection and the results were satisfactory.

Inhibition of catalytic activity of fibrinogen-stabilized gold nanoparticles via thrombin-induced inclusion of nanoparticle into fibrin: Application for thrombin sensing with more than 104-fold selectivity

Citrate-capped gold nanoparticles (AuNPs) modified with thrombin-binding aptamer are often implemented for colorimetric, fluorescent, and electrochemical detection of thrombin in an aqueous solution. However, researchers have rarely explored the application of fibrinogen-modified AuNPs (F-AuNPs) for thrombin sensing. We present a simple, inexpensive, sensitive, and selective probe for colorimetric assay of thrombin through combining thrombin-induced inclusion of F-AuNPs into Fibrin and F-AuNPs-catalyzed reduction of 4-nitrophenol with an excess amount of NaBH₄. Considering that fibrinogen stabilized citrate-capped AuNPs against a high-ionic-strength buffer, F-AuNPs efficiently catalyzed the NaBH₄-mediated decrease of yellow 4-nitrophenol to colorless 4-aminophenol. The presence of thrombin converted fibrinogen into fibrin on the nanoparticle surface, leading to the inclusion of nanoparticles into fibrin. The formation of fibrin inhibited that the AuNPs catalyzed the NaBH₄-mediated reduction of 4-nitrophenol. Consequently, the color of the solution gradually varied from colorless to yellow with increasing thrombin concentration. The proposed system was shown to be accurate in the quantification of small differences in the concentration of human thrombin over the range of 4-60 pM. The lowest detectable concentration of human thrombin by the naked eye was as low as 16 pM. We demonstrated the practical application of the proposed system in quantifying 1-15 nM human thrombin in human plasma.

Recent advances and developments on integrating nanotechnology with chemiluminescence assays

Chemiluminescence (CL) techniques are extensively utilized for detection of analytes due to their high sensitivity, rapidity and selectivity. With the advent of nanotechnology and incorporation of the nanoparticles in the CL system has revolutionized the assays due to their unique optical and mechanical properties. Several CL-based reactions have been developed where these nanoparticle based CL sensors have evolved as excellent prospects for sensing in various analytical applications. This review article addresses the nanoparticles based CL detection system that are recently developed, the mechanisms has been summarized and the role of luminophors have been discussed. This article critically analyzes the optimal conditions for the CL detection along with quantitative assessment of the analytes. We have included the use of semiconductor nanoparticles, metal nanoparticles, graphene based nanostructures, mesoporous nanospheres, layered double hydroxides, clays for CL detection. The scope and application of these nanoscale material based CL system in various branches of science and technology including chemistry, biomedical applications, pharmaceutics, food, environmental and toxicological applications has been critically summarized.

Sensitive fluorescent detection of fibrin based on the inner filter effect of gold nanoparticles

A simple, rapid and sensitive fluorescent assay for determination of fibrin has been developed based on the inner filter effect (IFE) of gold nanoparticles (AuNPs).

The Applications of Gold Nanoparticle-Initialed Chemiluminescence in Biomedical Detection

Chemiluminescence technique as a novel detection method has gained much attention in recent years owning to the merits of high sensitivity, wider linear ranges, and low background signal. Similarly, nanotechnology especially for gold nanoparticles has emerged as detection tools due to their unique physical and chemical properties. Recently, it has become increasingly popular to couple gold nanoparticles with chemiluminescence technique in biological agents' detection. In this review, we describe the superiority of both chemiluminescence and gold nanoparticles and conclude the different applications of gold nanoparticle-initialed chemiluminescence in biomedical detection.

Au NCs-enhanced chemiluminescence from NaHSO3–H2O2 and its analytical application

It was found that the ultra-weak chemiluminescence (CL) emission from the sodium bisulfite (NaHSO₃)–H₂O₂ system could be enhanced by gold nanoclusters (Au NCs).