A differentially selective probe based on diketopyrrolopyrrole with fluorescence turn-on response to Fe3+, and dual-mode turn-on and ratiometric response to Au3+, and its application in living cell imaging

A Dihydropyridine Derivative as a Highly Selective Fluorometric Probe for Quantification of Au3+ Residue in Gold Nanoparticle Solution

Novel dihydroquinoline derivatives (DHP and DHP-OH) were synthesized in one pot via a tandem trimerization-cyclization of methylpropiolate. DHP and DHP-OH possess strong blue fluorescence with high quantum efficiencies over 0.70 in aqueous media. DHP-OH displays a remarkable fluorescence quenching selectively to the presence of Au3+ through the oxidation of dihydropyridine to pyridinium ion as confirmed by NMR and HRMS. DHP-OH was used to demonstrate the quantitative analysis of Au3+ in water samples with the limit of detection of 33 ppb and excellent recovery (>95%). This fluorescent probe was also applied for the determination of Au3+ residue in the gold nanoparticle solution and a paper-based sensing strip for the on-site detection of Au3+.

Research Progress on Multifunctional Fluorescent Probes for Biological Imaging, Food and Environmental Detection

There has been rapid progress in the development of fast, sensitive, cheap and low-cytotoxicity micro-molecule fluorescent probes for application in various fields, including disease diagnosis, food safety and environmental safety. As an analytical tool, dual-function fluorescent probes with dual-emission responses have attracted considerable attention due to their cost-effectiveness and efficiency over single-function sensors. This review primarily describes research progress on multifunctional probes in terms of the reaction type and coordination type, as well as the general design principles of probes. The analytes include reactive oxygen species (ROS), reactive sulfur species (RSS), harmful cations and anions, etc. Multifunctional probes for food, medical and environmental applications are listed for future research. To improve the development of rapid detection methods, trends and strategies in the development of multifunctional fluorescent probes are also discussed.

A novel AIEE active anti-B18H22derivative-based Cu2+and Fe3+fluorescence off-on-off sensor

A novel fluorescence sensor for successive detection of Cu²⁺and Fe³⁺based on anti-B₁₈H₂₂derivative which possesses 5-hydroxyisoquinoline as an ionophore was synthesized via a one-pot and its structure and photophysical properties were characterized by NMR, HRMS, FTIR, UV-vis, PL and theoretical calculation. The fluorophore displays two emission peaks at 460 nm and 670 nm in THF solution coming from the emission of the locally excited state and intramolecular charge transfer fluorescence, respectively. The complex exhibited obvious aggregation-induced emission enhancement (AIEE) characteristics in THF/H₂O solution by increasing the aqueous concentration from 70% to 95%. The AIEE molecules showed a high selectivity towards Cu²⁺over other metal ions by forming a 2:1 metal-to-ligand complex in THF/H₂O (fw = 20%) solution, the fluorescence intensity increased as a linear function of the Cu²⁺concentration at 460 nm due to the inhibition of PET effect. The fluorescent emission was quenched linearly by the addition of Fe³⁺, which provides a method for successive determination of Cu²⁺and Fe³⁺based on 'off-on-off' fluorescence of the fluorescent. The detection limit of Cu²⁺and Fe³⁺was 5.7 × 10^-6M and 7.2 × 10^-5M respectively. Morever, a rapid identification of Cu²⁺in the aqueous solution by naked eyes can be realized. In addition, the molecules were pH-sensitive, the fluorescence quenching can be observed in strongly alkaline environment. The method has been applied to the determination of copper ions in water samples with satisfactory results.

Thiophene-Bipyridine Appended Diketopyrrolopyrrole Ligands and Platinum(II) Complexes

Straightforward palladium(II) catalyzed direct cross-coupling reaction between decyl, (S)-2-methyl-butyl, and dodecyl N-substituted diketopyrrolopyrrole thiophene (DPPT), including a 3-methoxy-thiophene derivative, and 6-bromo-2,2'-bipyridine afforded a series of mono- and bis-bipyridine substituted DPPT ligands 1-3. Complexation reactions with PtCl₂(DMSO)₂ provided ortho-metalated platinum(II) complexes 1-Pt and 2-Pt, together with the N^N^O complex 3d-Pt(N^N^O) resulted from the O-Me activation of the intermediary complex 3d-Pt(N^N). The ligand 1b and the mononuclear complexes 1a-Pt and 1b-Pt have been structurally characterized by single crystal X-ray structure, evidencing the establishment of numerous intermolecular π-π interactions in the solid state. Moreover, in the crystal structure of the model complex DMTB-Pt(N^N^O) (DMTB = 3,4-dimethoxy-(2,2'-bipyridine)) the chelating tridentate N^N^O mode is clearly evidenced. The chiral ligand 1b and its mononuclear complex 1b-Pt do not show any CD signal in solution, but they are CD active in the solid state with bisignate bands in the low energy region, opposite in sign between the ligand and the complex, suggesting helical supramolecular arrangement of the dpp chromophore in the solid state. Photophysical investigations demonstrate that all of the ligands are fluorescent with high quantum yields, while the emission is quenched for the complexes, except partially in 3d-Pt(N^N), very likely through an intersystem crossing mechanism promoted by the heavy metal. Density functional theory calculations support the differences observed between the absorption properties of the ligands, ortho- and non-ortho-metalated complexes. The highly fluorescent bipyridine ligands reported herein open the way toward multifunctional transition metal complexes and their use in organic electronics.

A cystine-based dual chemosensor for fluorescent-colorimetric detection of CN- and fluorescent detection of Fe3+ in aqueous media: Synthesis, spectroscopic, and DFT studies

A new dual-responsive chiral cystine based chemosensor, Cys(cou)₂, has been designed and characterized by ¹H NMR, ¹³C NMR, FT-IR, UV-vis as well as elemental analysis. This sensor exhibited an excellent response towards Fe³⁺ and CN^- with high selectivity and sensitivity by fluorescence turn-off mechanism. The binding mode of Cys(cou)₂ with Fe³⁺, and CN^- was confirmed by ESI-MS, ¹H NMR, and fluorescence titration and also quantum chemical calculation. These results showed that the stoichiometric ratio of Cys(cou)₂-Fe³⁺ and Cys(cou)₂-CN is 1:1 and 1:3 in DMSO/Tris aqueous buffer (1:1, v/v), respectively. The linear relationship of the Stern-Volmer plot illustrates the static quenching mechanism at different concentrations. The detection limit (LOD) and binding constant (K_a) for Fe³⁺ and CN^- are 0.029 μM, 1.28 × 10⁴ and 0.51 μM, 9.94 × 10⁶, respectively. Moreover, Cys(cou)₂ can act as a colorimetric sensor for CN^- in DMSO with the color change from colorless to yellow.

Utilizing the interfacial reaction of naphthalenyl thiosemicarbazide-modified carbon dots for the ultrasensitive determination of Fe (III) ions

Since thiosemicarbazide contains numerous nitrogen and sulfur atoms in its structural formula that enhance its strong coordinating abilities with metal ions, it is always selected as the mother molecule for the design of metal-ion sensors. In this report, a thiosemicarbazide derivative (4-naphthalenyl-3-thiosemicarbazide (NTSC)) was synthesized via a single step process and covalently conjugated onto the surfaces of carbon dots (CDs). The modified CDs demonstrated excellent monodispersity, good photostability, and tunable luminescence properties. More importantly, the CDs retained a highly specific Fe³⁺ recognition capacity in contrast to other competing metal ions. Fe³⁺ can efficiently quench the fluorescence of CDs even at fairly low concentration (30μM) with a detection limit as low as 1.68nM. The fluorescence quenching kinetics are likely to involve static quenching, which is caused by specific interactions between NTSC-CDs and Fe³⁺ toward the formation of a ground state complex. Due to their excellent optical performance, low toxicity, and good biocompatibility the NTSC-CDs may be applied to the imaging and monitoring of Fe³⁺ in bacillus subtilis. In effect we successfully fabricated an effective fluorescent nanosensor for both the quantitative detection of Fe³⁺ in aqueous solutions, and its real-time imaging in vivo.

Recent Advances on Iron(III) Selective Fluorescent Probes with Possible Applications in Bioimaging

Iron(III) is well-known to play a vital role in a variety of metabolic processes in almost all living systems, including the human body. However, the excess or deficiency of Fe3+ from the normal permissible limit can cause serious health problems. Therefore, novel analytical methods are developed for the simple, direct, and cost-effective monitoring of Fe3+ concentration in various environmental and biological samples. Because of the high selectivity and sensitivity, fast response time, and simplicity, the fluorescent-based molecular probes have been developed extensively in the past few decades to detect Fe3+. This review was narrated to summarize the Fe3+-selective fluorescent probes that show fluorescence enhancement (turn-on) and ratiometric response. The Fe3+ sensing ability, mechanisms along with the analytical novelties of recently reported 77 fluorescent probes are discussed.

Two sugar-rhodamine "turn-on" fluorescent probes for the selective detection of Fe3

Two new sugar-rhodamine fluorescent probes (RDG1 and RDG2) have been synthesized and characterized by ¹H NMR, ¹³C NMR and HRMS. Their UV-Vis, fluorescence spectra and fluorescence-response to Fe³⁺ are investigated and discussed. RDG1 had a very nice linear relationship between UV absorbance and Fe³⁺ concentration with the correlation coefficient as high as 0.997 and the detection limit is 3.46×10^-6M. Upon the addition of Fe³⁺, the spirolactam ring of RDG1 was opened and a 1:1 metal ligand complex was formed from Job's plot. The results showed that RDG1 can be used as an effective fluorescent probe for selective detection of Fe³⁺ in water. RDG2 was incorporated the well-known rhodamine group and a water-soluble d-glucose group within one molecule and can be used for detecting Fe³⁺ in natural water as a selective fluorescent sensor. The addition of Fe³⁺ into RDG2 resulted in a strongly enhanced fluorescence as well as color change of solution from colorless to pink. Job's plot of RDG2 indicated 1:1 stoichiometry of RDG2-Fe³⁺. RDG2 can serve as a probe for Fe³⁺ between pH=4.0 to 7.0 and it's detection limit is 2.09×10^-6M. The OFF-ON fluorescent mechanisms of RDG1-Fe³⁺ and RDG2-Fe³⁺ are proposed.

A dual-responsive colorimetric and fluorescent chemosensor based on diketopyrrolopyrrole derivative for naked-eye detection of Fe3+ and its practical application

A novel dual-responsive colorimetric and fluorescent chemosensor L based on diketopyrrolopyrrole derivative for Fe³⁺ detection was designed and synthesized. In presence of Fe³⁺, sensor L displayed strong colorimetric response as amaranth to rose pink and significant fluorescence enhancement and chromogenic change, which served as a naked-eye indicator by an obvious color change from purple to red. The binding constant for L-Fe³⁺ complex was found as 2.4×10⁴ with the lower detection limit of 14.3nM. The sensing mechanism was investigated in detail by fluorescence measurements, IR and ¹H NMR spectra. Sensor L for Fe³⁺ detection also exhibited high anti-interference performance, good reversibility, wide pH response range and instantaneous response time. Furthermore, the sensor L has been used to quantify Fe³⁺ ions in practical water samples with good recovery.

Design of a two-photon fluorescent probe for selective recognition of Au(III) over Au(I) and its application of imaging in vitro and in vivo

A highly selective two-photon fluorescent probe (PyCM-1) for Au³⁺ was developed with distinct "turn on" fluorescence response, low detection limit (22nM) and large two-photon absorption cross-sections (696 GM at 860nm). Its high selectivity for Au³⁺ over Au⁺ was achieved via the modification on the type of coordination atoms in the Schiff base receptor. Co-staining experiments showed that the probe PyCM-1 could co-localize specifically with mitochondria. Moreover, the two-photon confocal fluorescence imaging results demonstrated the probe's capability for visualizing Au³⁺in vitro and in vivo.

Highly selective ratiometric fluorescent probe based on diketopyrrolopyrrole for Au3+: an experimental and theoretical study

A diketopyrrolopyrrole-based fluorescent probe 1 was explored as a ratiometric probe for selective detection of Au³⁺, with the detection limit of 18 nM.

A dendrimer-based highly sensitive and selective fluorescence-quenching sensor for Fe(3+) both in solution and as film

A novel fluorescent dendrimer PYTPAG2, with pyrene as the interior core and triphenylamine (TPA) as the exterior periphery, is studied as a fluorescence-quenching sensor for iron (ш) ions (Fe(3+)), both in solution and as a film. This dendrimer-based sensor possesses preferential detection of Fe(3+) by a very strong fluorescence quenching not found for other metal ions. The fluorescent detection limits of this PYTPAG2 sensor for Fe(3+) in solution and thin-film are 6.5×10(-7)M and 5.0×10(-7)M, respectively. The possible mechanism of this process is explained by the complexation between the peripheral TPA units of PYTPAG2 and Fe(3+) ions, which may disrupt the fluorescence resonance energy transfer (FRET) from the TPA groups to the pyrene core (intramolecular of PYTPAG2) and results in the fluorescence quenching. Moreover, this striking performance could not be disturbed by pH, the interference with other metal ions, counter anions, or surrounding environment. In addition, biological fluorescence imaging studies of Fe(3+) in living roundworms demonstrate its valuable practical application.

A diketopyrrolopyrrole-based fluorescence turn-on probe for the detection of Pb2+in aqueous solution and living cells

A diketopyrrolopyrrole-based fluorescent probeDPP-HBTbearing a benzothiazole hydrazone motif exhibited an obvious fluorescent turn-on response toward Pb²⁺ions with a low detection limit of 2.3 × 10⁻¹⁰M in aqueous solution.