Fluorescent aptasensor for chloramphenicol detection using DIL-encapsulated liposome as nanotracer

ZnO/C nanocomposite grafted molecularly imprinted polymers as photoelectrochemical sensing interface for ultrasensitive and selective detection of chloramphenicol

Nanomaterials-based photoelectrochemical (PEC) detection is becoming a rapidly-developing analytical technique in chemical and biological assays due to its unique advantages of easy miniaturization, high sensitivity, and rapid turnaround time. Herein, a molecularly imprinted polymer-assisted PEC sensor based on ZnO/C nanocomposite was successfully fabricated for the highly sensitive and selective determination of chloramphenicol (CAP). Benefiting from the hydrophilic functional groups (-OH, -COOH) and large surface area of bio-templated ZnO/C nanocomposite, the tight grafting of MIP with excellent recognition ability on substrate is easier and more stable than traditional PEC sensor, thus significantly increasing the performance. Under optimal conditions, the PEC sensor exhibited significant CAP detection performance in the range of 0.01-5000 ng mL^-1 with a detection LOD of 5.08 pg mL^-1 (S/N = 3) and successfully applied to the detection of CAP in milk sample. Our results show that ZnO/C nanocomposite and MIP can act as an efficient photo-responsible matrix to fabricate PEC sensor, providing important application potentials for pollutants control in food and environment.

Aptamer-based NanoBioSensors for seafood safety

Chemical and biological contaminants are of primary concern in ensuring seafood safety. Rapid detection of such contaminants is needed to keep us safe from being affected. For over three decades, immunoassay (IA) technology has been used for the detection of contaminants in seafood products. However, limitations inherent to antibody generation against small molecular targets that cannot elicit an immune response, along with the instability of antibodies under ambient conditions greatly limit their wider application for developing robust detection and monitoring tools, particularly for non-biomedical applications. As an alternative, aptamer-based biosensors (aptasensors) have emerged as a powerful yet robust analytical tool for the detection of a wide range of analytes. Due to the high specificity of aptamers in recognising targets ranging from small molecules to large proteins and even whole cells, these have been suggested to be viable molecular recognition elements (MREs) in the development of new diagnostic and biosensing tools for detecting a wide range of contaminants including heavy metals, antibiotics, pesticides, pathogens and biotoxins. In this review, we discuss the recent progress made in the field of aptasensors for detection of contaminants in seafood products with a view of effectively managing their potential human health hazards. A critical outlook is also provided to facilitate translation of aptasensors from academic laboratories to the mainstream seafood industry and consumer applications.

Nanomaterial-Based Fluorescent Biosensor for Food Safety Analysis

Food safety issues have become a major threat to public health and have garnered considerable attention. Rapid and effective detection methods are crucial for ensuring food safety. Recently, nanostructured fluorescent materials have shown considerable potential for monitoring the quality and safety of food because of their fascinating optical characteristics at the nanoscale. In this review, we first introduce biomaterials and nanomaterials for food safety analysis. Subsequently, we perform a comprehensive analysis of food safety using fluorescent biosensors based on nanomaterials, including mycotoxins, heavy metals, antibiotics, pesticide residues, foodborne pathogens, and illegal additives. Finally, we provide new insights and discuss future approaches for the development of food safety detection, with the aim of improving fluorescence detection methods for the practical application of nanomaterials to ensure food safety and protect human health.

Self-coordinated nanozyme on Cu3BiS3 nanorods for high-performance aptasensing

A novel strategy is reported to access high-performance nanozymes via the self-coordination of ferrocyanides ([Fe(CN)₆]^4-) onto the surface of the Cu₃BiS₃ (CBS) nanorods. Notably, the in situ formed nanozymes had high catalytic activity, good stability, low cost, and easy mass production. The formed nanozyme catalyzed the oxidation of the typical chromogenic substrate of 3,3',5,5'-tetramethylbenzidine (TMB) with a distinctive absorption peak at 652 nm, accompanied by a blue color development. Moreover, the attachment of deoxyribonucleoside 5'-monophosphates (dNMP) beforehand onto the surface of CBS prevented coordination of ferrocyanides and resulted in the tunable formation of the nanozyme, thereby enabling the construction of an exquisite biosensing platform. Taking the aptasensing of chloramphenicol (CAP) as an example, the engineered nanozyme allowed the construction of a homogenous, label-free, and high-performance bioassay in terms of its convenience and high sensitivity. Under the optimal conditions, changes in the absorption intensity at 652 nm for the oxidized TMB provides a good linear correlation with the logarithm of CAP concentrations in the range 0.1 pM to 100 nM, and the limit of detection was 0.033 pM (calculated from 3σ/s). Considering a vast number of bioreactions can be connected to dNMP production, we expect the engineerable nanozyme as a universal signal transduction scaffold for versatile applications in bioassays. Through the attachment of deoxyribonucleoside 5'-monophosphate (dNMP) on the surface of CBS to regulate the generation of self-coordinated nanozyme CBS/BiHCF, a homogeneous, label-free, and high-performance universal aptasensing platform was constructed.

Enhancement of Antitumor Efficacy of Paclitaxel-Loaded PEGylated Liposomes by N,N-Dimethyl Tertiary Amino Moiety in Pancreatic Cancer

Introduction

Pancreatic cancer, or pancreatic duct adenocarcinoma (PDAC), remains one of the most lethal cancers and features insidious onset, highly aggressive behavior and early distant metastasis. The dense fibrotic stroma surrounding tumor cells is thought to be a shield to resist the permeation of chemotherapy drugs in the treatment of PDAC. Thus, we synthesized a pancreas-targeting paclitaxel-loaded PEGylated liposome and investigated its antitumor efficacy in the patient-derived orthotopic xenograft (PDOX) nude mouse models of PDAC.

Methods

The PTX-loaded PEGylated liposomes were prepared by film dispersion-ultrasonic method and modified by an N,N-dimethyl tertiary amino residue. Morphology characteristics of the PTX-loaded liposomes were observed by transmission electron microscope (TEM). The PDOX models of PDAC were established by orthotopic implantation and imaged by a micro positron emission tomography/computed tomography (PET/CT) imaging system. The in vivo distribution and antitumor study were then carried out to observe the pancreas-targeting accumulation and the antitumor efficacy of the proposed PTX liposomes.

Results

PTX loaded well into both modified (PTX-Lip2N) and unmodified (PTX-Lip) PEGylated liposomes with spherical shapes and suitable parameters for the endocytosis process. The PDOX nude mouse models were successfully created in which high ¹⁸F-FDG intaking regions were observed by micro-PET/CT. In addition to higher cellular uptakes of PTX-Lip2N by the BxPC-3 cells, the proposed nanoparticle had a notable penetrating ability towards PDAC tumor tissues, and consequently, the antitumor ability of PTX-Lip2N was significantly superior to the unmodified PTX-Lip in vivo PDOX models and even more effective than nab-PTX in restraining tumor growth.

Conclusion

The modified pancreas-targeting PTX-loaded PEGylated liposomes provide a promising platform for the treatment of pancreatic cancer.

Green Enzyme-Linked Immunosorbent Assay Based on the Single-Stranded Binding Protein-Assisted Aptamer for the Detection of Mycotoxin

In this work, a green enzyme-linked immunosorbent assay (ELISA) based on the single-stranded binding protein (SSB)-assisted aptamer was designed for biosensing applications. Combined with the biotin-streptavidin (SA) system and the high catalytic activity of horseradish peroxidase (HRP), this SSB-assisted aptamer sensor was applied for the detection of aflatoxin B1, ochratoxin A, and zearalenone. In this novel ELISA, mycotoxin-protein conjugations were replaced by SSB to avoid the hazard of mycotoxin, whereas antibodies were replaced by aptamer to avoid the complex and tedious preparation of antibodies. In the absence of target mycotoxins, SSB can bind the aptamer-biotin specifically. Detection was performed using the strong combination of biotin and SA after adding SA-HRP and substrate/chromogen solution, thereby resulting in a strong yellow color signal. In the presence of target mycotoxins, the aptamer-biotin cannot bind to the SSB, thereby leading to a weak yellow color signal. Under optimal conditions, the designed method was successfully applied for the determination of real sample and exhibited high specificity and low limits of detection in corn (112 ng L^-1 for aflatoxin B1, 319 ng L^-1 for ochratoxin A, and 377 ng L^-1 for zearalenone). The green ELISA may also be extended to the detection of other biohazardous targets by changing the aptamer.

The Growing Interest in Development of Innovative Optical Aptasensors for the Detection of Antimicrobial Residues in Food Products

The presence of antimicrobial residues in food-producing animals can lead to harmful effects on the consumer (e.g., allergies, antimicrobial resistance, toxicological effects) and cause issues in food transformation (i.e., cheese, yogurts production). Therefore, to control antimicrobial residues in food products of animal origin, screening methods are of utmost importance. Microbiological and immunological methods (e.g., ELISA, dipsticks) are conventional screening methods. Biosensors are an innovative solution for the development of more performant screening methods. Among the different kinds of biosensing elements (e.g., antibodies, aptamers, molecularly imprinted polymers (MIP), enzymes), aptamers for targeting antimicrobial residues are in continuous development since 2000. Therefore, this review has highlighted recent advances in the development of aptasensors, which present multiple advantages over immunosensors. Most of the aptasensors described in the literature for the detection of antimicrobial residues in animal-derived food products are either optical or electrochemical sensors. In this review, I have focused on optical aptasensors and showed how nanotechnologies (nanomaterials, micro/nanofluidics, and signal amplification techniques) largely contribute to the improvement of their performance (sensitivity, specificity, miniaturization, portability). Finally, I have explored different techniques to develop multiplex screening methods. Multiplex screening methods are necessary for the wide spectrum detection of antimicrobials authorized for animal treatment (i.e., having maximum residue limits).

A simple fluorescent strategy based on triple-helix molecular switch for sensitive detection of chloramphenicol

A simple fluorescent strategy based on the formation of triple-helix molecular switch (THMS) between a signal transduction probe (STP) and an aptamer (Apt) was constructed for the determination of chloramphenicol (CAP). A weak fluorescence intensity was observed for STP solution due to the proximity of fluorophore and quencher through intramolecular DNA hybridization, causing the fluorescence quenching. The fluorescence intensity of the system was significantly enhanced after the addition of Apt. It was attributed to the formation of THMS between the Apt and STP through the Watson-Crick and Hoogsteen base pairing, resulting in the restoration of fluorescence because of the long distance between the fluorophore and quencher of STP. The fluorescence intensity of the system decreased due to the release of STP caused by the specific binding between Apt and CAP. The quantitative analysis of CAP could be achieved based on the decreased fluorescence intensity. The parameters affecting the performance of THMS including the Apt arm length, pH of buffer solution, Mg²⁺ concentration and the formation time of THMS were investigated in detail. Under the optimal conditions (Apt arm length of 9 bases, pH of 6.5, 2.5 × 10³ μmol L^-1 Mg²⁺, THMS formation time of 30 min), the decreased fluorescence intensity and the concentration of chloramphenicol were linear in the range of 5.0 × 10^-3-2.0 × 10^-1 μmol L^-1 with the correlation coefficient of 0.9963. The limit of detection was 1.2 nmol L^-1. Subsequently, the developed method was applied to the analysis of chloramphenicol in honey sample, and the recovery was between 84.5% and 103.0% with relative standard deviation less than 4.6%.

Aptasensors as the future of antibiotics test kits-a case study of the aptamer application in the chloramphenicol detection

Antibiotics are a type of antimicrobial drug with the ubiquitous presence in foodstuff that effectively applied to treat the diseases and promote the animal growth worldwide. Chloramphenicol as one of the antibiotics with the broad action spectrum against Gram-positive and Gram-negative bacteria is widely applied for the effective treatment of infectious diseases in humans and animals. Unfortunately, the serious side effects of chloramphenicol, such as aplastic anemia, kidney damage, nausea, and diarrhea restrict its application in foodstuff and biomedical fields. Development of the sufficiently sensitive methods to detect chloramphenicol residues in food and clinical diagnosis seems to be an essential demand. Biosensors have been introduced as the promising tools to overcome the requirement. As one of the newest types of the biosensors, aptamer-based biosensors (aptasensors) are the efficient sensing platforms for the chloramphenicol monitoring. In the present review, we summarize the recent achievements of the accessible aptasensors for qualitative detection and quantitative determination of chloramphenicol as a candidate of the antibiotics. The present chloramphenicol aptasensors can be classified in two main optical and electrochemical categories. Also, the other formats of the aptasensing assays like the high performance liquid chromatography (HPLC) and microchip electrophoresis (MCE) have been reviewed. The enormous interest in utilizing the diverse nanomaterials is also highlighted in the fabrication of the chloramphenicol aptasensors. Finally, some results are presented based on the advantages and disadvantages of the studied aptasensors to achieve a promising perspective for designing the novel antibiotics test kits.

Tungsten disulfide (WS2) nanosheet-based photoelectrochemical aptasensing of chloramphenicol

A method is described for photoelectrochemical determination of chloramphenicol (CLOA). It is based on the use of (a) aptamers protected with photoactive WS₂ nanosheets, and (b) DNase I-assisted target recycling. The DNA aptamer without label was employed for recognition of CLOA. In the absence of CLOA, the aptamer is adsorbed on the surface of WS₂. This leads to a decrease of photocurrent due to the steric-hindrance effect of aptamer DNA. The adsorption of WS₂ also protects the aptamer from digestion by DNase. In the presence of CLOA, the aptamer will be desorbed from the WS₂ surface due to formation of an aptamer/CLOA conjugate. This results in an increased photocurrent due to a decreased amount of aptamer DNA on the electrode surface. The increase of photocurrent can be further improved by applying DNase triggered catalytic recycling of CLOA. Under optimal experimental conditions, the response is linear 10 pM - 10 nM CLOA concentration range, with a 3.6 pM lower detection limit (at 3σ). This method is acceptably selective, accurate and stable. It was applied to the determination of CLOA in spiked milk samples and gave satisfactory results. Graphical abstract A simple and sensitive photoelectrochemical apta-biosensor was fabricated for chloramphenicol detection. In this work, WS₂ nanosheets were employed as photoactive material, and DNase I catalytic chloramphenicol recycling strategy was adopted to amplify the detection signal.

Dual-mode fluorescent and colorimetric immunoassay for the ultrasensitive detection of alpha-fetoprotein in serum samples

We present a novel dual-mode fluorescent and colorimetric immunosensor based on conventional immunoassay platforms by utilizing a gold nanoflower (AuNF)-loaded fluorescein molecule (AuNF@Fluorescein) as signal output. The AuNFs were modified with thiolated carboxyl ligand, which consisted of a hydrophobic alkane chain as hydrophobic wallet for fluorescein encapsulation, a tetra (ethylene glycol) unit for biocompatibility and solubility, and a functional carboxyl group for the conjugation of biorecognition molecules for biosensing. The resultant AuNFs showed a high loading capacity of 3.74 × 10⁶ fluorescein molecules per AuNF because of its flower-like shape with many complex branches. By adjusting the solution pH to 8.0, the fluorescein molecules can almost entirely be released from the hydrophobic wallet of AuNF@Fluorescein, which led to strong fluorescent-signal amplification. Under the optimal detection conditions, the proposed immunoassay based on fluorescent signal exhibited ultrahigh sensitivity for alpha-fetoprotein (AFP) detection, with a limit of detection (LOD) of 29 fg/mL. This value is approximately 9.3 × 10³-fold lower than that of corresponding horseradish peroxidase (HRP)-based immunoassay (LOD = 270 pg/mL). The fluorescein molecule also had intrinsic peroxidase-like activity to catalyze 3,3',5,5'-tetramethylbenzidine oxidation with hydrogen peroxide for colorimetric signal. The proposed method with colorimetric mode further exhibited a sensitivity with a LOD of 17.7 pg/mL, which is about 15-fold lower than that of conventional HRP-based immunoassay. The recoveries of the proposed dual-mode immunoassay for AFP spiked serum samples ranged within 89.85%-100.0%, with the coefficient of variations ranging from 0.5% to 2.4%, indicating acceptable accuracy and precision for AFP quantitative detection. The reliability of the developed dual-mode immunoassay was further compared with a commercial chemiluminescence immunoassay kit by analyzing 20 clinical serum samples, showing that the two methods well agreed with each other, with high correlation coefficients of 0.997 and 0.986 based on recorded fluorescence and colorimetric signals, respectively. In summary, the proposed method was highly suitable for the ultrasensitive analysis of biomarkers or infectious diseases by fluorescence mode and can be used for routine clinical diagnosis by colorimetric mode.

Aptamer-Based Biosensors for Antibiotic Detection: A Review

Antibiotic resistance and, accordingly, their pollution because of uncontrolled usage has emerged as a serious problem in recent years. Hence, there is an increased demand to develop robust, easy, and sensitive methods for rapid evaluation of antibiotics and their residues. Among different analytical methods, the aptamer-based biosensors (aptasensors) have attracted considerable attention because of good selectivity, specificity, and sensitivity. This review gives an overview about recently-developed aptasensors for antibiotic detection. The use of various aptamer assays to determine different groups of antibiotics, like β-lactams, aminoglycosides, anthracyclines, chloramphenicol, (fluoro)quinolones, lincosamide, tetracyclines, and sulfonamides are presented in this paper.

Dual-competitive lateral flow aptasensor for detection of aflatoxin B1 in food and feedstuffs

A novel dual-competitive lateral flow aptasensor (LFA) benefited from aptamer and lateral flow strips was first designed by using aflatoxin B₁ (AFB₁) as the model target. In this LFA assay, the target AFB₁ competed with AFB₁-hapten at T line for binding to Cy5-labeled AFB₁ aptamer and the complementary strand competed with the target AFB₁ for binding to Cy5-labeled AFB₁ aptamer at C line. The ratio of their fluorescent intensities at the T line and C line (ST/SC ratio) was employed in order to increase the sensitivity for target AFB₁ detection. This technique has the limit of detection (LOD) of 0.1ng/mL for AFB₁ within the linear range from 0.1ng/mL to 1000ng/mL. Subsequently, the LFA approach was validated using 11 kinds of food and feedstuff samples with a simple aqueous extraction protocol. The test results with different naturally contaminated feedstuffs indicated a good correlation between this LFA and a commercial ELISA kit. The assay can be completed within 20min and its sensitivity, specificity and reproducibility are highly satisfactory. This is the first LFA that has been rigorously validated, which will be greatly beneficial to development of commercial aptamer-based biosensors for food safety, environmental analysis, particularly in clinical diagnosis.

Highly sensitive colorimetric aptasensor for ochratoxin A detection based on enzyme-encapsulated liposome

A simple, low-cost, and sensitive liposome-based colorimetric aptasensor has been developed to detect ochratoxin A (OTA). Specifically, a dumbbell-shaped probe was designed, including magnetic beads (MBs), double-stranded DNA (dsDNA), and enzyme-encapsulated liposome. The dsDNA formed by the hybridization between OTA aptamer and its complementary probe. And the dsDNA was used to contact the MBs and the enzyme-encapsulated liposome. In the presence of OTA, the aptamer preferred to combine with OTA to form G-quadruplex, resulting in the release of the detection probe and the enzyme-encapsulated liposome. Each liposome contained a large amount of HRP. Thus, when the liposome was lysed by adding the mixed solution of 3,3',5,5'-tetramethylbenzidine (TMB) and H₂O₂, a large number of HRP were released. HRP could catalyze the H₂O₂-mediated oxidation of TMB and hence resulted in the color change from colorless to blue with the OTA concentration varying, and this variation can be observed by naked eyes easily. The result showed that the absorption intensity at 652 nm enhanced with the increase of OTA concentration ranging from 0.05 to 2.0 ng mL^-1, and the limit of detection was calculated to be 0.023 ng mL^-1 (S/N = 3). The developed colorimetric aptasensor has been applied to detect OTA concentration in corn samples with satisfied results.

Liposomes and lipid bilayers in biosensors

Biosensors for the rapid, specific, and sensitive detection of analytes play a vital role in healthcare, drug discovery, food safety, and environmental monitoring. Although a number of sensing concepts and devices have been developed, many longstanding challenges to obtain inexpensive, easy-to-use, and reliable sensor platforms remain largely unmet. Nanomaterials offer exciting possibilities for enhancing the assay sensitivity and for lowering the detection limits down to single-molecule resolution. In this review, we present an overview of liposomes and lipid bilayers in biosensing applications. Lipid assemblies in the form of spherical liposomes or two-dimensional planar membranes have been widely used in the design of biosensing assays; in particular, we highlight a number of recent promising developments of biosensors based on liposomes in suspension, liposome arrays, and lipid bilayers arrays. Assay sensitivity and specificity are discussed, advantages and drawbacks are reviewed, and possible further developments are outlined.

A novel SERS-based magnetic aptasensor for prostate specific antigen assay with high sensitivity

The accurate and highly sensitive detection of prostate specific antigen (PSA) is particularly important, especially for obese men and patients. In this report, we present a novel aptamer-based surface-enhanced Raman scattering (SERS) sensor that employs magnetic nanoparticles (MNPs) core-Au nanoparticles (AuNPs) satellite assemblies to detect PSA. The high specific biorecognition between aptamer and PSA caused the dissolution of the core-satellite assemblies, thus the concentration of functionalized AuNPs (signal probes) existing in the supernatant was on the rise with the continual addition of PSA. The aptamer-modified MNPs were used as supporting materials and separation tools in the present sensor. With the assistance of magnet, the mixture was removed from the supernatant for the concentration effects. It was found that the corresponding SERS signals from the supernatant were in direct correlation to PSA concentrations over a wide range and the limit of detection (LOD) was as low as 5.0pg/mL. Excellent recovery was also obtained to assess the feasibility of this method for human serum samples detection. All of these results show a promising application of this method. And this novel sensor can be used for the accurate and highly sensitive detection of PSA in clinic samples in the future.

A homogenous “signal-on” aptasensor for antibiotics based on a single stranded DNA binding protein-quantum dot aptamer probe coupling exonuclease-assisted target recycling for signal amplification

The method is based on replacement reaction, just by mixing the probes with targets for detection, which is simple and easy for manipulation.

Fluorescent microsphere immunochromatographic assays for detecting bone alkaline phosphatase based on biolayer interferometry-selected antibody

A convenient, reliable, highly sensitive, and competitive fluorescent microsphere-lateral flow immunochromatographic assay (FM-LFIA) was developed for the quantitative detection of BAP for the first time.

Novel single-stranded DNA binding protein-assisted fluorescence aptamer switch based on FRET for homogeneous detection of antibiotics

Herein, a smart single-stranded DNA binding protein (SSB)-assisted fluorescence aptamer switch based on fluorescence resonance energy transfer (FRET) was designed. The FRET switch was synthesized by connecting SSB labeled quantum dots (QDs@SSB) as donor with aptamer (apt) labeled gold nanoparticles (AuNPs@apt) as acceptor, and it was employed for detecting chloramphenicol (CAP) in a homogenous solution. In the assay, the interaction between core-shell QDs@SSB and AuNPs@apt leads to a dramatic quenching (turning off). After adding CAP in the detection system, AuNPs@apt can bind the target specifically then separate QDs@SSB with AuNPs@apt-target, resulting in restoring the fluorescence intensity of QDs (turning on). Consequently, the fluorescence intensity recovers and the recovery extent can be used for detection of CAP in homogenous phase via optical responses. Under optimal conditions, the fluorescence intensity increased linearly with increasing concentrations of CAP from 0.005 to 100ngmL^-1. The limit of this fluorescence aptamer switch was around 3pgmL^-1 for CAP detection. When the analyte is changed, the assay can be applied to detect other targets only by changing relative aptamer in AuNPs@apt probe. Furthermore, it has potential to be served as a simple, sensitive and portable platform for antibiotic contaminants detection in biological and environmental samples.

A triple-amplification SPR electrochemiluminescence assay for chloramphenicol based on polymer enzyme-linked nanotracers and exonuclease-assisted target recycling

The present study aimed to explore a novel triple-amplification electrochemiluminescence (ECL) assay for detecting of chloramphenicol (CAP). This strategy was based on single-stranded DNA-binding protein (SSB) and horseradish peroxidase (HRP) enzyme-linked polymer (EnVision reagent, EV) labeled on Au nanoparticles (EV-Au-SSB) as nanotracer and exonuclease-assisted target recycling. The composite probes were prepared via immunoreactions between the CdS nanocrystal (CdS NC)-functionalized partial complementary DNA and aptamer (CdSNCs/Apt-ssDNA1) as capture probes, and EV-Au-SSB as nanotracer. When the composite probe solution co-existed with CAP and Exo I, the aptamer on the capture probes preferentially combined with CAP, and then CAP-Apt and nanotracer complex were released into the solution. Subsequently, Exo I in the solution could further digest the CAP-Apt from the 3'-end of the aptamer and release CAP, which could participate in further reaction with the probes. It was worth mentioning that EV contained a large number of HRPs on its dendritic chain. In the EV-Au-SSB, Au could enhance ECL intensity of CdS NCs by surface plasmon resonance. What's more, HRPs on EV could catalyze the reaction of H2O2, which could obviously enhance ECL intensity of CdS NCs. This study demonstrated excellent performance of the triple-amplification ECL assay, which makes this aptasensor system suitable and promising for the practical application of CAP residues in fish samples. Moreover, the assay might provide a promising avenue to develop efficient aptasensors to determine small-molecule harmful substances in environmental monitoring and food safety.