Paper-based fluorescent sensor for rapid naked-eye detection of acetylcholinesterase activity and organophosphorus pesticides with high sensitivity and selectivity

A novel fluorescent and photothermal probe based on nanozyme-mediated cascade reaction for detecting organophosphorus pesticide residues

In this study, a nanozyme (ZIF-Co-Cys) with high oxidase-like catalytic activity was prepared, and a ratiometric fluorescent/photothermal dual-mode probe was constructed for organophosphorus pesticides (OPs) detection based on the competitive effect of ZIF-Co-Cys and the enzymatic reaction product of acid phosphatase (ACP) on o-phenylenediamine and the inhibition effect of OPs on ACP activity. Using dimethyl dichloroviny phosphate (DDVP) as the model, both the fluorescence intensity ratio and the temperature change of the probe solution exhibited an excellent correlation with OPs concentration. The detection limits were 1.64 ng/mL and 0.084 ng/mL, respectively. Additionally, the detection of DDVP residues in real samples verified the outstanding anti-interference and accuracy of the probe. This work not only provided a complementary dual-mode method for the accurate and rapid detection of OPs residues in complex samples, but also supplied a new insight into the design of a multi-mode sensing platform based on the cascade reaction of nanozyme.

Silver coated PS microsphere array SERS microfluidic chip for pesticide detection

Carbendazim and acetamidine are pesticides that widely used to control pests and diseases in oilseed rape. In this paper, a rapid, accurate and reliable method was proposed for the detection of carbendazim and acetamidine with SERS microfluidic chip technology. Ag-ps(Polystyrene microspheres) microsphere SERS substrate was prepared by spin coating and magnetron sputtering deposition of Ag. The enhancement factor of prepared SERS substrate was 2.4 × 1010. The SERS detection working curves were well fitted and the linear parameters R2 were 0.987 and 0.994, respectively. The limit of detection was 0.01 mg/mL. The use of SERS microfluidic chip to detect carbendazim and acetamidine is expected to provide a way for the detection of pesticide residues in crops, which has broad application prospects in the field of food safety.

"On-On-Off" Recyclable Fluorescence Battery for Direct and Selective Detection of Glyphosate and Cu2

Residues of environmental organophosphorus pesticides (OPs) will seriously endanger human health. Most reported OP sensors utilized the restrictions capacity of OPs on the catalytic capacity of acetylcholinesterase (AChE) to acetylthiocholine chloride (ATCh), which suffers from high costs, weak stability, long reaction time, and unrecyclable. Herein, a recyclable strategy was proposed for selective and sensitive detection of glyphosate (Gly). The weak fluorescence of UIO-66-NH2 at 450 nm was enhanced almost 10-fold after reacting with Gly because of the rotation-restricted emission enhancement mechanism. Moreover, inspired by the process of charging and discharging the batteries, we introduced Cu2+ to chelate with Gly. Because of the strong chelation between Cu2+ and Gly, the Gly was removed from UIO-66-NH2, which resulted in the quenching of fluorescence intensity and making UIO-66-NH2 recycle. This method proposed is fast, recyclable, easily conducted, and with a low 0.33 μM LOD in dd H2O based on 3σ/S. The recovery rates of Gly in tap water ranged from 93.07 to 104.35% within a satisfied 7.75% RSD. The Cu2+ LOD is 0.01 mM based on 3σ/S and 94.37-118.34% recovery rates within 6.48% RSD in tap water. We believe that the findings in this work provide a meaningful and promising strategy to detect Gly and Cu2+ in real samples. This sensor first successfully achieves the recycling use of the material in OP fluorescence detection, which greatly decreases the cost of the designed sensor and reduces the possibility of secondary pollution to the environment, broadens a new circulation dimension of fluorescence detection methods in detecting OPs, and has the potential to remove glyphosate from water. It also provides a method to utilize functionalized metal-organic frameworks to establish various sensors.

Construction of an autofluorescence interference-free phosphorescence biosensor for the specific detection of TK1 mRNA

The anti-interference ability of biosensors is critical for detection in biological samples. Fluorescence-based sensors are subject to interference from self-luminescent substances in biological matrices. Therefore, phosphorescent sensors stand out among biosensors due to their lack of self-luminescence background. In this study, a phosphorescent sensor was constructed, which can accurately detect thymidine kinase 1 (TK1) mRNA in biological samples and avoid autofluorescence interference. When there is no target, polydopamine (PDA) is used as the phosphorescence resonance energy transfer (PRET) acceptor to quench the phosphorescence of the persistently luminescent (PL) nanomaterial. When there is a target, the DNA modified by the PL nanomaterial is replaced by the hairpin H and removed away from the PDA, resulting in a rebound in phosphorescence. The phosphorescent sensor exhibits a good linear relationship in the TK1 mRNA concentration range of 0-200 nM, and the detection limit was 1.74 nM. The sensor fabricated in this study can effectively avoid interference from spontaneous fluorescence in complex biological samples, and sensitively and precisely detect TK1 mRNA in serum samples, providing a powerful tool to more accurately detect biomarkers in biological samples.

Self-indicating polymers: a pathway to intelligent materials

Self-indicating polymers have emerged as a promising class of smart materials that possess the unique ability to undergo detectable variations in their physical or chemical properties in response to various stimuli. This article presents an overview of the most important mechanisms through which these materials exhibit self-indication, including aggregation, phase transition, covalent and non-covalent bond cleavage, isomerization, charge transfer, and energy transfer. Aggregation is a prevalent mechanism observed in self-indicating polymers, where changes in the degree of molecular organization result in variations in optical or electrical properties. Phase transition-induced self-indication relies on the transformation between different phases, such as liquid-to-solid or crystalline-to-amorphous transitions, leading to observable changes in color or conductivity. Covalent bond cleavage-based self-indicating polymers undergo controlled degradation or fragmentation upon exposure to specific triggers, resulting in noticeable variations in their structural or mechanical properties. Isomerization is another crucial mechanism exploited in self-indicating polymers, where the reversible transformation between the different isomeric forms induces detectable changes in fluorescence or absorption spectra. Charge transfer-based self-indicating polymers rely on the modulation of electron or hole transfer within the polymer backbone, manifesting as changes in electrical conductivity or redox properties. Energy transfer is an essential mechanism utilized by certain self-indicating polymers, where energy transfer between chromophores or fluorophores leads to variations in the emission characteristics. Furthermore, this review article highlights the diverse range of applications for self-indicating polymers. These materials find particular use in sensing and monitoring applications, where their responsive nature enables them to act as sensors for specific analytes, environmental parameters, or mechanical stress. Self-indicating polymers have also been used in the development of smart materials, including stimuli-responsive coatings, drug delivery systems, food sensors, wearable devices, and molecular switches. The unique combination of tunable properties and responsiveness makes self-indicating polymers highly promising for future advancements in the fields of biotechnology, materials science, and electronics.

Determination of Acetylcholinesterase Activity Based on Ratiometric Fluorescence Signal Sensing

Acetylcholinesterase (AChE) plays an important role in the treatment of human diseases, environmental security and global food supply. In this study, the simple fluorescent indicators and MnO2 nanosheets were developed and integrated to establish a ratiometric fluorescence sensing system for the detection of AChE activity. Two fluorescence signals could be recorded independently at the same excitation wavelength, which extended the detection range and enhanced the visibility of results. Fluorescence of F-PDA was quenched by MnO2 nanosheets on account of inner filtering effect. Meanwhile, the nonfluorescent OPD was catalytically oxidized to 2,3-diaminophenazine by MnO2 nanosheets. The acetylcholine (ATCh) was catalytically hydrolyzed by AChE to enzymatic thiocholine, which decomposed MnO2 to Mn2+, recovered the fluorescence of F-PDA and reduced the emission of ox-OPD. Utilizing the fluorescence intensity ratio F468/F558 as the signal readout, the ratiometric fluorescence method was established to detect AChE activity. Under the excitation wavelength of 410 nm, the ratio F460/F558 against the AChE concentration demonstrated two linear relationships in the range 0.05 -1.0 and 1.0-50 U·L- 1 with a limit of detection (LOD) of 0.073 U·L- 1. The method was applied to the detection of AChE activity and the analysis of the inhibitor Huperzine-A. Due to the advantages of high sensitivity and favorable selectivity, the method possesses an application prospect in the activity deteceion of AChE and the screening of inhibitors.

Highly specific and sensitive chromo-fluorogenic detection of sarin, tabun, and mustard gas stimulants: a multianalyte recognition approach

Nerve agents are the most notorious substances, which can be fatal to an individual because they block the activity of acetylcholinesterase. Fighting against unpredictable terrorist assaults and wars requires the simple and quick detection of chemical warfare agent vapor. In the present contribution, we have introduced a rhodamine-based chemosensor, BDHA, for the detection of nerve gas-mimicking agents diethylchlorophosphate (DCP) and diethylcyanophosphonate (DCNP) and mustard gas-mimicking agent 2-chloroethyl ethyl sulfide (CEES), both in the liquid and vapor phase. Probe BDHA provides the ability for detection by the naked eye in terms of colorimetric and fluorometric changes. It has been revealed that the interaction between nerve agents mimics and probe BDHA facilitates spirolactam ring opening due to the phosphorylation process. Thus, the highly fluorescent and colored species developed while probe BDHA is colorless and non-fluorescent due to the intramolecular spirolactam ring. Moreover, probe BDHA can effectively recognize DCP, DCNP, and CEES in the µM range despite many toxic analytes and could be identified based on the response times and quantum yield values. Inexpensive, easily carried paper strips-based test kits were developed for the quick, on-location solid and vapor phase detection of these mustard gas imitating agents (CEES) and nerve gas mimicking agents (DCP and DCNP) without needing expensive equipment or skilled personnel. More remarkably, the test strips' color and fluorescence can be rapidly restored, exposing them to triethyl amine (TEA) for cyclic use, suggesting a potential application in the real-time identification of chemical warfare agents. To accomplish the on-location application of BDHA, we have experimented with soil samples to find traces of DCP. Therefore, the chromo-fluorogenic probe BDHA is a promising, instantaneous, and on-the-spot monitoring tool for the selective detection of DCP, DCNP, and CEES in the presence of others.

Co-based Nanozymatic Profiling: Advances Spanning Chemistry, Biomedical, and Environmental Sciences

Nanozymes, next-generation enzyme-mimicking nanomaterials, have entered an era of rational design; among them, Co-based nanozymes have emerged as captivating players over times. Co-based nanozymes have been developed and have garnered significant attention over the past five years. Their extraordinary properties, including regulatable enzymatic activity, stability, and multifunctionality stemming from magnetic properties, photothermal conversion effects, cavitation effects, and relaxation efficiency, have made Co-based nanozymes a rising star. This review presents the first comprehensive profiling of the Co-based nanozymes in the chemistry, biology, and environmental sciences. The review begins by scrutinizing the various synthetic methods employed for Co-based nanozyme fabrication, such as template and sol-gel methods, highlighting their distinctive merits from a chemical standpoint. Furthermore, a detailed exploration of their wide-ranging applications in biosensing and biomedical therapeutics, as well as their contributions to environmental monitoring and remediation is provided. Notably, drawing inspiration from state-of-the-art techniques such as omics, a comprehensive analysis of Co-based nanozymes is undertaken, employing analogous statistical methodologies to provide valuable guidance. To conclude, a comprehensive outlook on the challenges and prospects for Co-based nanozymes is presented, spanning from microscopic physicochemical mechanisms to macroscopic clinical translational applications.

Bifunctional TiO2 Nanoflower-Induced H4TCBPE Aggregation Enhanced Electrochemiluminescence for an Ultrasensitive Assay of Organophosphorus

In this work, the aggregation-induced emission ligand 1,1,2,2-tetra(4-carboxylbiphenyl)ethylene (H4TCBPE) was rigidified in the Ti-O network to form novel electrochemiluminescence (ECL) emitter H4TCBPE-TiO2 nanospheres, which acted as an effective ECL emitter to construct an "on-off" ECL biosensor for ultrasensitive detection of malathion (Mal). H4TCBPE-TiO2 exhibited excellent ECL responses due to the Ti-O network that can restrict the intramolecular free motions within H4TCBPE and then reduce the nonradiative relaxation. Moreover, TiO2 can act as an ECL co-reaction accelerator to promote the generation of sulfate radical anion (SO4•-), which interacts with H4TCBPE in the Ti-O network to produce enhanced ECL response. In the presence of Mal, numerous ligated probes (probe 1 to probe 2, P1-P2) were formed and released by copper-free click nucleic acid ligation reaction, which then hybridized with hairpin probe 1 (H1)-modified H4TCBPE-TiO2-based electrode surface. The P1-P2 probes can initiate the target-assisted terminal deoxynucleoside transferase (TdTase) extended reaction to produce long tails of deoxyadenine with abundant biotin, which can load numerous streptavidin-functionalized ferrocenedicarboxylic acid polymer (SA-PFc), causing quenching of the ECL signal. Thus, the ultrasensitive ECL biosensor based on H4TCBPE-TiO2 ECL emitter and click chemistry-actuated TdTase amplification strategy presents a desirable range from 0.001 to 100 ng/mL and a detection limit low to 9.9 fg/mL. Overall, this work has paved an avenue for the development of novel ECL emitters, which has opened up new prospects for ECL biosensing.

A Multi-Enzyme Cascade Response for the Colorimetric Recognition of Organophosphorus Pesticides Utilizing Core-Shell Pd@Pt Nanoparticles with High Peroxidase-like Activity

In modern agricultural practices, organophosphorus pesticides or insecticides (OPs) are regularly used to restrain pests. Their limits are closely monitored since their residual hinders the capability of acetylcholinesterase (AChE) and brings out a threatening accumulation of the neurotransmitter acetylcholine (ACh), which affects human well-being. Therefore, spotting OPs in food and the environment is compulsory to prevent human health. Several techniques are available to identify OPs but encounter shortcomings like time-consuming, operating costs, and slow results achievement, which calls for further solutions. Herein, we present a rapid colorimetric sensor for quantifying OPs in foods using TMB as a substrate, a multi-enzyme cascade system, and the synergistic property of core-shell Palladinum@Platinum (Pd@Pt) nanoparticles. The multi-enzyme cascade response framework is a straightforward and effective strategy for OPs recognition and can resolve the previously mentioned concerns. Numerous OPs, including Carbofuran, Malathion, Parathion, Phoxim, Rojor, and Phosmet, were successfully quantified at different concentrations. The cascade method established using Pd@Pt had a simple and easy operation, a lower detection limit range of (1-2.5 ng/mL), and a short detection time of about 50 min. With an R2 value of over 0.93, OPs showed a linear range of 10-200 ng/mL, portraying its achievement in quantifying pesticide residue. Lastly, the approach was utilized in food samples and recovered more than 80% of the residual OPs.

Aggregation-Induced Emission (AIE), Life and Health

Light has profoundly impacted modern medicine and healthcare, with numerous luminescent agents and imaging techniques currently being used to assess health and treat diseases. As an emerging concept in luminescence, aggregation-induced emission (AIE) has shown great potential in biological applications due to its advantages in terms of brightness, biocompatibility, photostability, and positive correlation with concentration. This review provides a comprehensive summary of AIE luminogens applied in imaging of biological structure and dynamic physiological processes, disease diagnosis and treatment, and detection and monitoring of specific analytes, followed by representative works. Discussions on critical issues and perspectives on future directions are also included. This review aims to stimulate the interest of researchers from different fields, including chemistry, biology, materials science, medicine, etc., thus promoting the development of AIE in the fields of life and health.

Two Fe(III)/Eu(III) Salophen complex-based optical sensors for determination of organophosphorus pesticide monocrotophos

Monocrotophos (MP), an organophosphorus pesticide, poses a serious threat to human health, so a rapid and simple technique is needed to detect it. In this study, two novel optical sensors for MP detection were created using the Fe(III) Salophen complex and Eu(III) Salophen complex, respectively. One sensor is an Fe(III) Salophen complex (I-N-Sal), which can bind MP selectively and form a supramolecule, resulting in a strong resonance light scattering (RLS) signal at 300 nm. Under the optimum conditions, the detection limit was 30 nM, the linear range was 0.1-1.1 μM, the correlation coefficient R² = 0.9919, and the recovery rate range was 97.0-103.1%. Interaction properties between the sensor I-N-Sal and MP and the RLS mechanism were investigated using density functional theory (DFT). And another sensor is based on the Eu(III) Salophen complex and 5-aminofluorescein derivatives. The Eu(III) Salophen complex was immobilized on the surface of amino-silica gel (Sigel-NH₂) particles as the solid phase receptor (ESS) of MP and 5-aminofluorescein derivatives as the fluorescent (FL)-labeled receptor (N-5-AF) of MP, which can selectively bind the MP and form a sandwich-type supramolecule. Under the optimum conditions, the detection limit was 0.4 μM, the linear range was 1.3-7.0 μM, the correlation coefficient R² = 0.9983, and the recovery rate range was 96.6-101.1%. Interaction properties between the sensor and MP were investigated by UV-vis, FT-IR, and XRD. Both sensors were successfully applied to the determination of MP content in tap water and camellia.

Ultrasensitivity Detecting AChE through "Covalent Assembly" and Signal Amplification Strategic Approaches and Applied to Screen Its Inhibitor

An ultrasensitivity detecting assay for acetylcholinesterase (AChE) activity was developed based on "covalent assembly" and signal amplification strategic approaches. After hydrolyzing thioacetylcholine by AChE and participation of thiol in a self-inducing cascade accelerated by the Meldrum acid derivatives of 2-[bis(methylthio) methylene] malonitrile (CA-2), mercaptans triggered an intramolecular cyclization assembly by the probe of 2-(2,2-dicyanovinyl)-5-(diethylamino) phenyl 2,4-dinitrobenzenesulfonate (Sd-I) to produce strong fluorescence. The limit of detection for AChE activity was as low as 0.0048 mU/mL. The detection system also had a good detecting effect on AChE activity in human serum and could also be used to screen its inhibitors. By constructing a Sd-I@agarose hydrogel with a smartphone, a point-of-care detection of AChE activity was achieved again.

Direct and Specific Detection of Glyphosate Using a Phosphatase-like Nanozyme-Mediated Chemiluminescence Strategy

Most organophosphorus pesticide (OP) sensors reported in the literature rely on the inhibition effect of OPs on the activity of acetylcholinesterase (AChE), which suffer from the drawbacks of lack of selective recognition of OPs, high cost, and poor stability. Herein, we proposed a novel chemiluminescence (CL) strategy for the direct detection of glyphosate (an organophosphorus herbicide) with high sensitivity and specificity, which is based on the porous hydroxy zirconium oxide nanozyme (ZrO_X-OH) obtained via a facile alkali solution treatment of UIO-66. ZrO_X-OH displayed excellent phosphatase-like activity, which could catalyze the dephosphorylation of 3-(2'-spiroadamantyl)-4-methoxy-4-(3'-phosphoryloxyphenyl)-1,2-dioxetane (AMPPD) to generate strong CL. The experimental results showed that the phosphatase-like activity of ZrO_X-OH is closely related to the content of hydroxyl groups on their surface. Interestingly, ZrO_X-OH with phosphatase-like properties exhibited a unique response to glyphosate because of the consumption of the surface hydroxyl group by the unique carboxyl group of glyphosates and was thus employed to develop a CL sensor for direct and selective detection of glyphosate without using bio-enzymes. The recovery for glyphosate detection of cabbage juice ranged from 96.8 to 103.0%. We believe that the as-proposed CL sensor based on ZrO_X-OH with phosphatase-like properties supplies a simpler and more highly selective approach for OP assay and provides a new method for the development of CL sensors for the direct analysis of OPs in real samples.

A surfactant-assisted approach enables the fluorescence tracking of benfluralin in plants

Developing an effective detection method for benfluralin (BFA) is of great significance, since BFA as most widely used herbicides can be bioaccumulated by aquatic organisms in environment, possessing potential risks to human health. Owing to aggregation-caused quenching effect, most fluorescent detection methods based on donor-acceptor organic fluorophores suffered from very low sensitivity towards BFA in water system, hampering the bioimaging application in plants. In this work, we reported a novel surfactant-assisted fluorescent probe enabling detection of BFA in water with a high sensitivity. The involvement of specific surfactant Triton X100 (TX100) could amplify the response signal of probe more than 100-fold. The detection limit for BFA was determined to be 80 nM, satisfying the environmental protection requirements. Moreover, we demonstrated applications of this strategy for the fluorescent imaging of BFA in plant. The absorbance of BFA into roots of Arabidopsis thaliana and castor seedlings was successfully observed based on this method.

Biosensors for the Detection of Enzymes Based on Aggregation-Induced Emission

Enzymes play a critical role in most complex biochemical processes. Some of them can be regarded as biomarkers for disease diagnosis. Taking advantage of aggregation-induced emission (AIE)-based biosensors, a series of fluorogens with AIE characteristics (AIEgens) have been designed and synthesized for the detection and imaging of enzymes. In this work, we summarized the advances in AIEgens-based probes and sensing platforms for the fluorescent detection of enzymes, including proteases, phosphatases, glycosidases, cholinesterases, telomerase and others. The AIEgens involve organic dyes and metal nanoclusters. This work provides valuable references for the design of novel AIE-based sensing platforms.

Recent Advances in Rapid Detection Techniques for Pesticide Residue: A Review

As an important chemical pollutant affecting the safety of agricultural products, the on-site and efficient detection of pesticide residues has become a global trend and hotspot in research. These methodologies were developed for simplicity, high sensitivity, and multiresidue detection. This review introduces the currently available technologies based on electrochemistry, optical analysis, biotechnology, and some innovative and novel technologies for the rapid detection of pesticide residues, focusing on the characteristics, research status, and application of the most innovative and novel technologies in the past 10 years, and analyzes challenges and future development prospects. The current review could be a good reference for researchers to choose the appropriate research direction in pesticide residue detection.

Dual-mode colorimetric-photothermal sensing platform of acetylcholinesterase activity based on the peroxidase-like activity of Fe-N-C nanozyme

Sensors based on colorimetry, fluorescence, and electrochemistry have been widely employed to detect acetylcholinesterase and its inhibitors, however, there are only a minority of strategies for AChE detection based on photothermal method. This work reports a versatile dual-mode colorimetric and photothermal biosensing platform for acetylcholinesterase (AChE) detection and its inhibitor (paraoxon-ethyl, a model of AChE inhibitors) monitor based on Fe-N-C/H₂O₂/3,3',5,5'-tetramethylbenzidine (TMB) system. The Fe-N-C with abundant active Fe-Nx sites shows outstanding peroxidase-mimicking activity and can be used to promote the generation of •OH by H₂O₂ to oxidize TMB. However, the introduction of mercapto molecules tending to coordinate with metal atoms result in the block of action site in Fe-N-C, thereby decrease its peroxidase-mimetic activity. The designed biosensor principle is based on the block of active sites of Fe-N-C by thiocholine (TCh, one kind of mercapto molecules) that can be produced by acetylthiocholine (ATCh) in the presence of AChE. Under optimum conditions, the limit of detection (LOD) for AChE activity is 1.9 mU mL^-1 (colorimetric) and 2.2 mU mL^-1 (photothermal), while for paraoxon-ethyl is 0.012 μg mL^-1 (colorimetric) and 0.013 μg mL^-1 (photothermal), respectively. The assay we proposed not only can be designed to monitor AChE detection and its inhibitors, but also can be easily extended for the detection of other biomolecules relate to the generation or consumption of H₂O₂.

Nanobody-based fluorescent immunoassay using carbon dots anchored cobalt oxyhydroxide composite for the sensitive detection of fenitrothion

Fenitrothion (FN) residue in food is a serious threat to public health. Consequently, a sensitive, cost-effective, and convenient immunoassay for FN urgently needs to be fabricated to safeguard human health. Herein, a nanobody-alkaline phosphatase fusion protein (Nb-ALP)-based fluorescent ELISA using red emissive carbon dots (r-CDs) anchored cobalt oxyhydroxide nanosheet (CoOOH NS) composite was developed for detecting FN. Briefly, a Nb-ALP was obtained by autoinduction expression and employed as a recognition, signal transduction, and amplification element. As the fluorescence signal source, r-CDs were assembled with CoOOH NS to yield the r-CDs@CoOOH NS composite, leading to the fluorescence quenching of r-CDs via Förster resonance energy transfer (FRET). After competitive immunoreaction, the Nb-ALP bounded to the immobilized antigen can mediate the production of ascorbic acid, which can reduce the CoOOH NS to Co²⁺, breaking the FRET between r-CDs and CoOOH NS, accompanied by the fluorescence recovery of r-CDs. This fluorescent ELISA is highly sensitive to FN with a detection limit of 0.14 ng mL^-1, which is 25-fold lower than that of conventional colorimetric ELISAs. The recovery test of food samples and the validation by GC-MS/MS further demonstrated the proposed assay was an ideal tool for detecting FN.

Fly-antennae-inspired biomass-based fluorescent platform for NH3 quantitative detection and visual real-time monitoring of seafood spoilage

Traditional strategies for quantitative detection of NH₃ and monitoring of seafood spoilage still have some pervasive issues of cumbersome operation, time-consuming, high-cost, and inefficient real-time monitoring, and visualization. Integration of biomass-based materials and aggregation-induced emission (AIE) fluorescence probes exhibit conceivable potential in seafood detection and environmental monitoring. Herein, a fly-antennae-inspired biomass-based solid-state fluorescent platform (PAA-FP) with effective, easy-to-use, reusable, low-cost and highly sensitive characteristics is nanoengineered for NH₃ quantitative detection (detection limit = 0.5 ppm) and visual real-time monitoring of seafood spoilage using smartphones. The PAA-FP possesses an anticipative "fly-antennae-like" microstructure and offers selective recognition of NH₃ by naked eyes in daylight with excellent solid-state fluorescence properties. Moreover, PAA-FP is simply reused at least 5 times after AcOH fumigation. Comprehensive application experiments substantiate that PAA-FP successfully achieves quantitative detection of NH₃ and realizes the visual real-time daylight monitoring of food spoilage using a simple color recognizing smartphone software. The present study demonstrates an effective fabrication strategy to explore various multifunctional biomass-based materials for sensing hazardous and noxious substances.

Progress in Nanomaterials-Based Enzyme and Aptamer Biosensor for the Detection of Organophosphorus Pesticides

With the improvement of people's safety awareness, the requirement of pesticide detection is gradually increasing, and many new detection methods toward Organophosphorus pesticide (OPs) has been further developed and applied. Nanomaterials-based biosensors have played an important role in the trace detection of OPs. This article mainly introduces the detection principle of enzymes and aptamers as the identification element of biosensors. Various nanomaterials (i.e., metals and metal oxides, carbon nanotubes, graphene and graphene oxide, quantum dots, metal organic frameworks, molecular imprinted polymers, etc.) possess their unique properties and play different roles in the enzyme and aptamer-based biosensors toward OPs: (a) to produce the optical or electrochemical signal; (b) as a carrier to load the enzyme or aptamer; (c) to enhance the signal response. Besides, the intelligent portable devices provide the possibility to realize the onsite and real-time detection. The limitations of some nanomaterials and the future development are discussed. Finally, the future of enzyme and aptamer-based biosensors has prospected.

Eu doped Ti3C2 quantum dots to form a ratiometric fluorescence platform for visual and quantitative point-of-care testing of tetracycline derivatives

Antibiotic residues have become a public health issues, the fast detection of tetracycline (Tc) in the environment is urgently required. In this work, Ti₃C₂ quantum dots (Ti₃C₂ QDs) and Europium ions jointly constructed a ratiometric fluorescence (FL) platform for the detection of Tc, based on synergistic impact of the Foster Resonance Energy Transfer (FRET) from Ti₃C₂ QDs to Eu³⁺ ions and the Antenna Effect (AE) between Tc and Eu³⁺ ions. And we proposed a ratiometric FL platform for detecting Tc with good linear response range (100-1000 uM) and low detection limit (48.79 nM). Meanwhile, we applied this platform to detect a serious of β-diketone ligands of Eu³⁺ ions, demonstrating the platform's versatility for this category of chemical. Furthermore, based on the color changes of QDs@Eu³⁺ from blue to red at 365 nm ultraviolet light, an intelligent detection smart device was built for the visual semi-quantitative detection of Tc in actual samples. We proved the applicability of the device in complicated samples and the potential for rapid, sensitive, intuitive and point-of-care detection in the field of environment, food, pharmaceutical and agriculture.

CRISPR-Cas12a based fluorescence assay for organophosphorus pesticides in agricultural products

Herein, we propose a sensitive fluorescent assay for organophosphorus pesticides (OPs) detection based on a novel strategy of activating the CRISPR-Cas12a system. Specifically, acetylcholinesterase (AChE) hydrolyzes acetylthiocholine into thiocholine (TCh). Subsequently, TCh induces the degradation of MnO₂ nanosheets and generates sufficient Mn²⁺ ions to activate the Mn²⁺-dependent DNAzyme. Then, as the catalytic product of activated DNAzyme, the short DNA strand activates the CRISPR-Cas12a system to cleave the fluorophore-quencher-labeled DNA reporter (FQ) probe effectively; thus, increasing the fluorescence intensity (FI) in the solution. However, in the presence of OPs, the activity of AChE is suppressed, resulting in a decrease in FI. Under optimized conditions, the limits of detection for paraoxon, dichlorvos, and demeton were 270, 406, and 218 pg/mL, respectively. Benefiting from the outstanding MnO₂ nanosheets properties and three rounds of enzymatic signal amplification, the proposed fluorescence assay holds great potential for the detection of OPs in agricultural products.

High-Throughput Aptamer Microarrays for Fluorescent Detection of Multiple Organophosphorus Pesticides in Food

A novel high-throughput aptamer microarray fluorescent method based on thioflavin T (ThT) was established for the sensitive detection of phoxim, parathion, fensulfothion, and isocarbophos. In this work, the aptamers in binding buffer tended to have the antiparallel G-quadruplex structure, which can bind ThT and release its potential fluorescence signal. However, when the organophosphorus pesticides (OPs) were present, partial aptamers preferred to bind them, forcing the displacement of ThT from the G-quadruplex and resulting in the significant decrease in fluorescence signal. Under optimal experimental conditions (12T spacer, 300 nM aptamer, and 80 μM ThT), the OP aptamer microarray has low limits of detection of 25.4 ng/mL for phoxim, 12.0 ng/mL for parathion, 7.7 ng/mL for fensulfothion, and 9.9 ng/mL for isocarbophos. The accuracy and reliability of the method is further verified by testing the recovery rate of OPs spiked in two different complicated sample matrices (pears and radishes). It is worth mentioning that not only the developed aptamer microarray technology has low sensitivity and a broad spectrum, but it also allows for high-throughput and rapid analysis of a variety OPs, which overcomes some of the shortcomings of other OP detection methods.

Background-free sensing platform for on-site detection of carbamate pesticide through upconversion nanoparticles-based hydrogel suit

On-site monitoring of carbamate pesticide in complex matrix remians as a challenge in terms of the real-time control of food safety and supervision of environmental quality. Herein, we fabricated robust upconversion nanoparticles (UCNPS)/polydopamine (PDA)-based hydrogel portable suit that precisely quantified carbaryl in complex tea samples with smartphone detector. UCNPS/PDA nanoprobe was developed by polymerization of dopamine monomers on the surface of NaErF₄: 0.5% Tm³⁺@NaYF₄ through electrostatic interaction, leading to efficient red luminescence quenching of UCNPS under near-infrared excitation, which circumvented autofluorescence and background interference in complicated environment. Such a luminescence quenching could be suppressed by thiocholine that was produced by acetylcholinesterase-mediated catalytic reaction, thus enabling carbaryl bioassay by inhibiting the activity of enzyme. Bestowed with the feasibility analysis of fluorescent output, portable platform was designed by integrating UCNPS-embedded sodium alginate hydrogel with 3D-printed smartphone device for quantitatively on-site monitoring of carbaryl in the range of 0.5-200 ng mL^-1 in tea sample, accompanied by a detection limit of 0.5 ng mL^-1. Owing to specific UCNPS signatures and hydrogel immobilization, this modular platform displayed sensitive response, portability and anti-interference capability in complex matrix analysis, thus holding great potential in point-of-care application.

Electrochemical detection of methyl-paraoxon based on bifunctional cerium oxide nanozyme with catalytic activity and signal amplification effect

A new electrochemical sensor for organophosphate pesticide (methyl-paraoxon) detection based on bifunctional cerium oxide (CeO₂) nanozyme is here reported for the first time. Methyl-paraoxon was degraded into p-nitrophenol by using CeO₂ with phosphatase mimicking activity. The CeO₂ nanozyme-modified electrode was then synthesized to detect p-nitrophenol. Cyclic voltammetry was applied to investigate the electrochemical behavior of the modified electrode, which indicates that the signal enhancement effect may attribute to the coating of CeO₂ nanozyme. The current research also studied and discussed the main parameters affecting the analytical signal, including accumulation potential, accumulation time, and pH. Under the optimum conditions, the present method provided a wider linear range from 0.1 to 100 μmol/L for methyl-paraoxon with a detection limit of 0.06 μmol/L. To validate the proof of concept, the electrochemical sensor was then successfully applied for the determination of methyl-paraoxon in three herb samples, i.e., Coix lacryma-jobi, Adenophora stricta and Semen nelumbinis. Our findings may provide new insights into the application of bifunctional nanozyme in electrochemical detection of organophosphorus pesticide.

•

A new electrochemical method for methyl-paraoxon detection by using bifunctional nanozyme was presented.

•

The cerium oxide nanozyme modified glassy carbon electrode was prepared to improve the sensitivity.

•

The developed method has been successfully applied in three herbal plant samples.

Nanoparticle-based colorimetric sensors to detect neurodegenerative disease biomarkers

Neurodegenerative disorders (NDDs) are progressive, incurable health conditions that primarily affect brain cells, and result in loss of brain mass and impaired function. Current sensing technologies for NDD detection are limited by high cost, long sample preparation, and/or require skilled personnel. To overcome these limitations, optical sensors, specifically colorimetric sensors, have garnered increasing attention towards the development of a cost-effective, simple, and rapid alternative approach. In this review, we evaluate colorimetric sensing strategies of NDD biomarkers (e.g. proteins, neurotransmitters, bio-thiols, and sulfide), address the limitations and challenges of optical sensor technologies, and provide our outlook on the future of this field.

Disposable Paper-Based Biosensors for the Point-of-Care Detection of Hazardous Contaminations-A Review

The fast detection of trace amounts of hazardous contaminations can prevent serious damage to the environment. Paper-based sensors offer a new perspective on the world of analytical methods, overcoming previous limitations by fabricating a simple device with valuable benefits such as flexibility, biocompatibility, disposability, biodegradability, easy operation, large surface-to-volume ratio, and cost-effectiveness. Depending on the performance type, the device can be used to analyze the analyte in the liquid or vapor phase. For liquid samples, various structures (including a dipstick, as well as microfluidic and lateral flow) have been constructed. Paper-based 3D sensors are prepared by gluing and folding different layers of a piece of paper, being more user-friendly, due to the combination of several preparation methods, the integration of different sensor elements, and the connection between two methods of detection in a small set. Paper sensors can be used in chromatographic, electrochemical, and colorimetric processes, depending on the type of transducer. Additionally, in recent years, the applicability of these sensors has been investigated in various applications, such as food and water quality, environmental monitoring, disease diagnosis, and medical sciences. Here, we review the development (from 2010 to 2021) of paper methods in the field of the detection and determination of toxic substances.

Integrating target-responsive CD-CdTe QD-based ratiometric fluorescence hydrogel with smartphone for visual and on-site determination of dichlorvos

A facile, economic, and portable test kit based on target-responsive hydrogel with smartphone detection was fabricated for the accurate determination of dichlorvos in tap water and food samples. Carbon dots (CDs) and CdTe quantum dots (QDs) embedded hydrogel were employed as indicator, and fluorescence of CdTe QDs (645 nm) was dynamically quenched by Cu²⁺ while that of CDs (490 nm) were non-response for Cu²⁺, em erging a typical ratiometric fluorescence signal. Acetylcholinesterase hydrolyzed acetylthiocholine to generate thiocholine that bound with Cu²⁺ strongly via S-Cu-S bond. Dichlorvos as competitive inhibitor for acetylcholinesterase prevented the generation of thiocholine, which blocked the formation of Cu-thiocholine complex and changed the ratiometric fluorescence signal. The signal of the test kit, which was recorded by smartphone's camera, was transduced by ImageJ software into the color parameter that was linearly proportional to the logarithm of dichlorvos concentration. This portable test kit showed wide linear range of 1 to 40 ppb and low detection limit of 0.38 ppb for dichlorvos. This test kit exhibited rapid sample-to-answer detection time (50 min) of dichlorvos in tap water and food samples, and the recoveries were in the range 81.3 to 111% with relative standard deviations of less than 9.1%. A facile and economic portable test kit based on CD-CdTe QD target-responsive hydrogel with smartphone was innovatively fabricated for the accurate determination of organophosphorus pesticides. This portable test kit showed low detection limit of 0.38 ppb for dichlorvos and rapid sample-to-answer detection time (50 min) in tap water and food samples, which offered a new sight for portable monitoring of environmental pollution and food safety.

3D-Printed, Portable, Fluorescent-Sensing Platform for Smartphone-Capable Detection of Organophosphorus Residue Using Reaction-Based Aggregation Induced Emission Luminogens

Development of an easy-to-use, low-cost, household device can help the consumer quickly identify an organophosphorus (OP) residue concentration level. In this work, we demonstrate a 3D-printed, portable, fluorescent-sensing platform for smartphone-capable detection of OPs in vegetables. For development of the proposed device, we utilize the smartphone for capturing the strong thiol-activated fluorescence, which was produced by hydrolysis of OPs in the presence of alkali. The thiol-responsive AIEgen (maleimide-functionalized tetraphenylethylene) was non-emissive in both solution and the solid state but could be readily lighted up by the click addition of thiol to its MI pendant. An android application "Detection" has been developed on the basis of the gray value to analyze the different concentration levels of OPs in vegetable samples. The gray value was linearly related with the concentration of five kinds of organophosphorus residue, ranging from 0 to 20 μg/mL. It was also applied for determination of OPs residue in the leaves of cowpea, celery, and Chinese cabbage. Different from acetylcholinesterase enzyme-based sensors for poor stability under high temperature, the proposed method was a direct detection method for OPs and can be used for rapid monitoring of OPs residue concentration levels before LC-MS analysis.

Ultrafast-response, highly-sensitive and recyclable colorimetric/fluorometric dual-channel chemical warfare agent probes

In this paper, two donor (D)-acceptor (A) type of small organic fluorescent molecules (T1 and T2) based on terpyridine group are synthesized, characterized and used as colorimetric/fluorometric dual-channel probes towards diethylchlorophosphate (DCP, the mimic of chemical warfare agent sarin) not only in solution but also in gas phase featuring instantaneous responses, excellent recyclability, high selectivity and sensitivity. Interestingly though the discriminated units of both chemosensors are terpyridine, their fluorescent responded signals are different, which is due to the different electron-donating substituents of T1 and T2 caused the different responded mechanism to DCP. And the possible sensing mechanism was proved by using nuclear magnetic resonance (¹H NMR, ³¹P NMR) spectra and natural transition orbitals calculations. Furthermore, facile testing filter paper-constructed strips with the visualization of colorimetric/fluorometric dual-channel responses based on T1 and T2 have been fabricated for real-time, on-site high selective and sensitive, recyclable monitor of DCP vapor.

Recent advances of environmental pollutants detection via paper-based sensing strategy

Paper has become one of the most promising substrates for building low-cost and powerful sensing platforms due to its self-pumping ability and compatibility with multiple patterning methods. Paper-based sensors have been greatly developed in the field of environmental monitoring. In this review, we introduced the research and application of paper-based sensors in environmental monitoring, focusing on the deposition and patterning methods of building paper-based sensors, and summarized the applications of detecting environmental pollutants, including metal ions, anions, explosives, neurotoxins, volatile organic compounds, and small molecules. In addition, the development prospects and challenges of promoting paper-based sensors are also discussed. The current review will provide references for the construction of portable paper-based sensors, and has implications for the field of on-site real-time detection of the environment.

Recent Advances on Detection of Insecticides Using Optical Sensors

Insecticides are enormously important to industry requirements and market demands in agriculture. Despite their usefulness, these insecticides can pose a dangerous risk to the safety of food, environment and all living things through various mechanisms of action. Concern about the environmental impact of repeated use of insecticides has prompted many researchers to develop rapid, economical, uncomplicated and user-friendly analytical method for the detection of insecticides. In this regards, optical sensors are considered as favorable methods for insecticides analysis because of their special features including rapid detection time, low cost, easy to use and high selectivity and sensitivity. In this review, current progresses of incorporation between recognition elements and optical sensors for insecticide detection are discussed and evaluated well, by categorizing it based on insecticide chemical classes, including the range of detection and limit of detection. Additionally, this review aims to provide powerful insights to researchers for the future development of optical sensors in the detection of insecticides.

Paper-Based Microfluidic Sensors for Onsite Environmental Detection: A Critical Review

A newly developed research topic, fabricated paper-based microfluidic sensors, was discussed in the field of low-cost environmental detection. Distinguished with the traditional dipstick or lateral-flow setups, these paper-based microfluidic sensors can serve as a tool for onsite quantitative and semi-quantitative measurements, without risks to cause environmental pollution. They have attracted increasing interest since the first easy-fabricated paper-based setup reported by Whitesides group in 2007. Most of the publications utilized paper-based sensors in clinical detection. In recent years, some groups started to use these sensors in environmental measurement, leading to precise, easy operation, low-cost, and eco-friendly methods for onsite detection. In this review, paper-based microfluidic sensors were briefly introduced, followed by literatures review and discussion for future perspectives.

An OliGreen-responsive fluorescence sensor for sensitive detection of organophosphorus pesticide based on its specific selectivity towards T-Hg2+-T DNA structure

In this paper, it was found that OliGreen emitted much stronger fluorescence in rigid T-Hg²⁺-T DNA structure than that in the presence of poly T. Thus, an OliGreen-responsive label-free fluorescent sensor was proposed for sensitive detection of organophosphorus pesticides (OPs) by constructing T-Hg²⁺-T DNA structure. OliGreen emits strong fluorescence in T-Hg²⁺-T structures. The rigid DNA structure of T-Hg²⁺-T is prone to be destroyed by thiocholine (TCh) that hydrolyzed by acetylcholinesterase (AChE) because of the high affinity of TCh with Hg²⁺. As a result, T-Hg²⁺-T DNA structure broke down and the fluorescence intensity of OliGreen decreased greatly. With the inhibition of AChE by OPs, fluorescence intensity of OliGreen remained strong because of the rigid T-Hg²⁺-T DNA structure. Thus, a "turn-on" fluorescent sensor which avoids synthesis of nanomaterials and complex label procedures is proposed based on the fluorescence intensity of OliGreen. DDVP were detected with a wide linear range from 0.005 to 25.0 ng/mL and the detection limit was 2.9 pg/mL, which is more sensitive than previously reported methods.

Red-to-blue paper-based colorimetric sensor integrated with smartphone for point-of-use analysis of cerebral AChE upon Cd2+ exposure

Herein, combined with a pervasive smartphone installed with a color recognition app, dual-responsive CDs@Eu/GMP ICPs were designed as a red-to-blue paper-based colorimetric sensor for the point-of-use analysis of cerebral acetylcholinesterase (AChE) upon Cd2+ exposure. Blue-emitting CDs with multi-functional groups as guests were encapsulated into the network of Eu/GMP ICPs to obtain CDs@Eu/GMP ICPs with the sensitized red fluorescence of Eu3+. With the presence of thiocholine (TCh), derived from acetylthiocholine (ATCh) hydrolyzed by AChE, the coordination environment of the CDs@Eu/GMP ICPs was interrupted, leading to the collapse of the CDs@Eu/GMP ICP network and the corresponding release of guest CDs into the surrounding environment. Consequently, the sensitized red fluorescence of Eu3+ decreased and the blue fluorescence of the CDs increased. This obvious red-to-blue fluorescent color changes of CDs@Eu/GMP ICPs on test paper could then be integrated with the smartphone for point-of-use analysis of cerebral AChE upon Cd2+ exposure, which not only offers a new analytical platform for a better understanding of the environmental risk of Alzheimer's Dementia (AD), but also holds great potential in the early diagnosis of AD even at the asymptomatic stage with the decrease in CSF AChE as an early biomarker.

Detecting Pesticide Dodine by Displacement of Fluorescent Acridine from Cucurbit[10]uril Macrocycle

According to a simple guest-replacement fluorescence turn-on mechanism, we constructed a fluorescent probe system based on cucurbit[10]uril (Q[10]) and protonated acridine (AD) to detect the pesticide dodine (DD). Formation of a homoternary inclusion complex AD₂@Q[10] in both aqueous solution and solid state was studied by means of ¹H NMR spectroscopy and X-ray crystallography. Although AD can emit strong fluorescence in aqueous solution, the homoternary inclusion complex AD₂@Q[10] does not exhibit any fluorescence. Upon the addition of the pesticide DD into the aqueous solution of AD₂@Q[10], the AD molecules in the Q[10] cavity are displaced by the pesticide DD, and strong fluorescence recovers. The fluorescent probe system based on Q[10] and AD provided a wide determination of DD from 0 to 4.0 × 10^-5 mol·L^-1 with a low limit of detection of 1.827 × 10^-6 mol·L^-1. The guest-replacement fluorescence turn-on mechanism is also confirmed by ¹H NMR spectroscopy. Further, the fluorescent probe can directly detect DD residues in real agricultural products, and obvious fluorescence signal was observed under UV irradiation.

Cu2+-Regulated reversible coordination interaction of GQD@Tb/GMP ICP nanoparticles: towards directly monitoring cerebrospinal acetylcholinesterase as a biomarker for cholinic brain dysfunction

This work demonstrates a new strategy for sensing cerebrospinal acetylcholinesterase (AChE) as a cholinergic biomarker for brain dysfunction based on graphene quantum dot (GQD)-functionalized lanthanide infinite coordination polymer (Ln-ICP) nanoparticles. The ICPs used in this work were comprised of two components, i.e. a supramolecular Ln-ICP host formed by the coordination between the GMP ligand and central metal ion Tb3+, and guest GQDs with abundant functional groups, which were utilized as antenna ligands to further sensitize the fluorescence of Tb/GMP. Upon excitation at 300 nm, the obtained GQD@Tb/GMP ICP nanoparticles exhibited enhanced green fluorescence from Tb/GMP. With the addition of Cu2+, the competitive coordination between Cu2+ and GQDs weakened the antenna effect, leading to a decrease in the fluorescence of GQD@Tb/GMP ICPs. However, in the presence of thiocholine (TCh), a thiol-containing compound hydrolyzed from acetylthiocholine (ATCh) by AChE, a stronger coordination interaction between Cu2+ and TCh occurred, resulting in the restoration of the fluorescence of GQD@Tb/GMP ICPs. Using the method established herein, the cerebrospinal AChE fluctuation of rats with acute organophosphorus pesticide (OP) poisoning or chronic Alzheimer's disease (AD) could be monitored. This study essentially provides a novel approach to realize the direct monitoring of a biomarker for brain dysfunction by regulating the competitive coordination interaction reversibly, which is critical in the early diagnosis and therapy of brain diseases.

A New Strategy Using a Fluorescent Probe Combined with Polydopamine for Detecting the Activity of Acetylcholinesterase

A water-soluble and sensitive fluorescent probe N,N′-bis[tris-(2-aminoethyl)amine]-3,4,9,10-perylenetetracarboxylic diimide (PTRIS) was synthesized and, in combination with polydopamine (PDA), utilised in the detection of acetylcholinesterase (AChE) activity. PDA is spontaneously polymerized from dopamine (DA) in aerobic and alkaline solutions. The excellent absorption of PDA results in the aggregation of PTRIS around PDA as well as π–π stacking between them, which consequently quenched the fluorescence of PTRIS due to aggregation induced quenching (AIQ) in 9min. The hydrolysis product of acetylthiocholine (ATCh) catalyzed by AChE, thiocholine (TCh), was proved to inhibit the polymerization of DA, therefore the free monomeric PTRIS retained its strong fluorescence intensity. The fluorescence was switched off and on depending on the activity of AChE. According to the change of fluorescence intensity at 550nm, the detection limit of AChE was quantified as 0.02mUmL−1. It was also proved that this probe possessed excellent selectivity for AChE. Tacrine and the organophosphate pesticide diazinon were further evaluated for inhibitor screening. The half-maximal inhibitory concentration value of tacrine and diazinon was calculated to be 1.4 and 1.6μM respectively, revealing potential applications for inhibition and pesticide detecting.

A NiAg-graphene quantum dot-graphene hybrid with high oxidase-like catalytic activity for sensitive colorimetric detection of malathion

This paper reports the synthesis of a nickel-silver-graphene quantum dot-graphene hybrid.

Sensitive and reversible perylene derivative-based fluorescent probe for acetylcholinesterase activity monitoring and its inhibitor

A reversible fluorescence probe for acetylcholinesterase activity detection was developed based on water soluble perylene derivative, N,N'-di(2-aspartic acid)-perylene-3,4,9,10-tetracarboxylic diimide (PASP). Based on the photo-induced electron transfer (PET), PASP fluorescence in aqueous is quenched after combining with copper ions (Cu²⁺). Acetylcholinesterase (AChE) is well known to catalyze the hydrolysis of acetylcholine (ATCh) to produce thiocholine, whose affinity is strong enough to capture Cu²⁺ by thiol (-SH) group from the complex PASP-Cu, resulting in the fluorescence signal of PASP recovers up to 90%. This optical switch is highly sensitive depended on the coordination and dissociation between PASP and Cu²⁺. We proposed its application for AChE activity detection, as well as its inhibitor screening. According to the change of fluorescence intensity, quantifying the detection limit of AChE was 1.78 mU·mL^-1. Classical inhibitors, tacrine and organophosphate pesticide diazinon, were further evaluated for drug screening. The IC₅₀ value of tacrine was calculated to be 0.43 μM, and the detection limit of diazinon was 0.22 μM. Both of these performances were much better than previous results, revealing our probe is sensitive and reversible for screening applications.