Polymerization amplified SPR−DNA assay on noncovalently functionalized graphene

Biosensors Based on the Binding Events of Nitrilotriacetic Acid-Metal Complexes

Molecular immobilization and recognition are two key events for the development of biosensors. The general ways for the immobilization and recognition of biomolecules include covalent coupling reactions and non-covalent interactions of antigen-antibody, aptamer-target, glycan-lectin, avidin-biotin and boronic acid-diol. Tetradentate nitrilotriacetic acid (NTA) is one of the most common commercial ligands for chelating metal ions. The NTA-metal complexes show high and specific affinity toward hexahistidine tags. Such metal complexes have been widely utilized in protein separation and immobilization for diagnostic applications since most of commercialized proteins have been integrated with hexahistidine tags by synthetic or recombinant techniques. This review focused on the development of biosensors with NTA-metal complexes as the binding units, mainly including surface plasmon resonance, electrochemistry, fluorescence, colorimetry, surface-enhanced Raman scattering spectroscopy, chemiluminescence and so on.

Applications of liquid crystals in biosensing

Liquid crystals (LCs), as a promising branch of highly-sensitive, quick-response, and low-cost materials, are widely applied to the detection of weak external stimuli and have attracted significant attention. Over the past decade, many research groups have been devoted to developing LC-based biosensors due to their self-assembly potential and functional diversity. In this paper, recent investigations on the design and application of LC-based biosensors are reviewed, based on the phenomenon that the orientation of LCs can be directly influenced by the interactions between biomolecules and LC molecules. The sensing principle of LC-based biosensors, as well as their signal detection by probing interfacial interactions, is described to convert, amplify, and quantify the information from targets into optical and electrical parameters. Furthermore, commonly-used LC biosensing targets are introduced, including glucose, proteins, enzymes, nucleic acids, cells, microorganisms, ions, and other micromolecules that are critical to human health. Due to their self-assembly potential, chemical diversity, and high sensitivity, it has been reported that tunable stimuli-responsive LC biosensors show bright perspectives and high superiorities in biological applications. Finally, challenges and future prospects are discussed for the fabrication and application of LC biosensors to both enhance their performance and to realize their promise in the biosensing industry.

Progress in miRNA Detection Using Graphene Material-Based Biosensors

MicroRNAs (miRNAs) are short, endogenous, noncoding RNAs that play critical roles in physiologic and pathologic processes and are vital biomarkers for several disease diagnostics and therapeutics. Therefore, rapid, low-cost, sensitive, and selective detection of miRNAs is of paramount importance and has aroused increasing attention in the field of medical research. Among the various reported miRNA sensors, devices based on graphene and its derivatives, which form functional supramolecular nanoassemblies of π-conjugated molecules, have been revealed to have great potential due to their extraordinary electrical, chemical, optical, mechanical, and structural properties. This Review critically and comprehensively summarizes the recent progress in miRNA detection based on graphene and its derivative materials, with an emphasis on i) the underlying working principles of these types of sensors, and the unique roles and advantages of graphene materials; ii) state-of-the-art protocols recently developed for high-performance miRNA sensing, including representative examples; and iii) perspectives and current challenges for graphene sensors. This Review intends to provide readers with a deep understanding of the design and future of miRNA detection devices.

Surface plasmon resonance biosensor for the accurate and sensitive quantification of O-GlcNAc based on cleavage by β-D-N-acetylglucosaminidase

Abnormal O-linked-N-acetylglucosamine (O-GlcNAc) concentrations have been associated with a variety of diseases (e.g., cancer, Alzheimer's disease, cardiovascular disease, etc.). However, O-GlcNAc detection is complicated, time-consuming and has poor specificity, therefore, the accurate detection of O-GlcNAc is difficult. In this study, an accurate and sensitive surface plasmon resonance (SPR) biosensor for O-GlcNAc detection that is based on β-D-N-acetylglucosaminidase (OGA) and Au nanoparticles (AuNPs) was developed. In this strategy, AuNPs were used to amplify the SPR signal and improve the biosensor's sensitivity; OGA was used to cleave O-GlcNAc from O-GlcNAcylated biomolecules. The interaction between AuNPs labeled wheat germ agglutinin (AuNPs/WGA) and O-GlcNAcylated biomolecules on a modified Au film treated with and without OGA was recorded by SPR. The change of the SPR signal moves linearly with the amount of O-GlcNAc on the Au film and thus could be used for the detection of O-GlcNAc. By recording the difference of the SPR signals, this method can avoid disturbances from other sugars and nonspecific adsorption of AuNPs and thus enable the accurate detection of O-GlcNAc. The accurate detection range of O-GlcNAc was 4.65 × 10^-12 to 4.65 × 10^-7 M which was obtained by quantifying the amount of a standard O-GlcNAcylated peptide (O-GlcNAc-CREB), and the detection limit is 4.65 × 10^-13 M. More importantly, the strategy was successfully used to detect O-GlcNAc in a real α-crystallin protein, cancer cell lysates and blood samples with satisfactory results. The study's results imply that this accurate and sensitive method has the potential to be applied in the early clinical diagnosis of O-GlcNAc-related diseases.

A novel potentiometric immunoassay for carcinoma antigen 15-3 by coupling enzymatic biocatalytic precipitation with a nanogold labelling strategy

Methods based on potentiometric measurement have been developed for immunoassays, but most exhibit low sensitivities and are unsuitable for early diagnosis of disease.

Analysis of Protein Interactions by Surface Plasmon Resonance

Surface plasmon resonance is an optical technique that is utilized for detecting molecular interactions, such as interactions that occur between proteins or other classes of molecules. Binding of a mobile molecule (analyte) to a molecule immobilized on a thin metal film (ligand) changes the refractive index of the film. The angle of extinction of light that is completely reflected after polarized light impinges upon the film, is altered and monitored as a change in detector position for a dip in reflected intensity (the surface plasmon resonance phenomenon). Because the method strictly detects mass, there is no need to label the interacting components, thus eliminating possible changes of their molecular properties. In this chapter, we review essential SPR methodology and present applications to basic science and human disease.

Development and Validation of a Reproducible and Label-Free Surface Plasmon Resonance Immunosensor for Enrofloxacin Detection in Animal-Derived Foods

This study describes the development of a reproducible and label-free surface plasmon resonance (SPR) immunosensor and its application in the detection of harmful enrofloxacin (ENRO) in animal-derived foods. The experimental parameters for the immunosensor construction and regeneration, including the pH value (4.5), concentration for coating ENRO-ovalbumin conjugate (ENRO-OVA) (100 μg·mL⁻¹), concentration of anti-ENRO antibody (80 nM) and regeneration solution (0.1 mol·L⁻¹ HCl) were evaluated in detail. With the optimized parameters, the proposed SPR immunosensor obtained a good linear response to ENRO with high sensitivity (IC₅₀: 3.8 ng·mL⁻¹) and low detection limit (IC₁₅: 1.2 ng·mL⁻¹). The proposed SPR immunosensor was further validated to have favorable performances for ENRO residue detection in typical animal-derived foods after a simple matrix pretreatment procedure, as well as acceptable accuracy (recovery: 84.3–96.6%), precision (relative standard deviation (n = 3): 1.8–4.6%), and sensitivity (IC₁₅ ≤ 8.4 ng·mL⁻¹). Each SPR chip for analysis can be reused at least 100 times with good stability and the analysis cycle containing the steps of sample uploading/chip regeneration/baseline recovery can be completed within 6 min (one cycle) and auto-operated by a predetermined program. These results demonstrated that the proposed SPR immunosensor provided an effective strategy for accurate, sensitive, and rapid detection for ENRO residue, which has great potential for routine analysis of large numbers of samples for measuring different types of compounds.

Enzymatic oligomerization and polymerization of arylamines: state of the art and perspectives

The literature concerning the oxidative oligomerization and polymerization of various arylamines, e.g., aniline, substituted anilines, aminonaphthalene and its derivatives, catalyzed by oxidoreductases, such as laccases and peroxidases, in aqueous, organic, and mixed aqueous organic monophasic or biphasic media, is reviewed. An overview of template-free as well as template-assisted enzymatic syntheses of oligomers and polymers of arylamines is given. Special attention is paid to mechanistic aspects of these biocatalytic processes. Because of the nontoxicity of oxidoreductases and their high catalytic efficiency, as well as high selectivity of enzymatic oligomerizations/polymerizations under mild conditions-using mainly water as a solvent and often resulting in minimal byproduct formation-enzymatic oligomerizations and polymerizations of arylamines are environmentally friendly and significantly contribute to a "green" chemistry of conducting and redox-active oligomers and polymers. Current and potential future applications of enzymatic polymerization processes and enzymatically synthesized oligo/polyarylamines are discussed.