Spatial-resolved electrochemiluminescence ratiometry based on bipolar electrode for bioanalysis

Dual "on-off" signal conversion strategy based on surface plasmon coupling and resonance energy transfer for visual electrochemiluminescence ratiometric analysis of MiRNA-141

An electrochemiluminescence (ECL) biosensor with a pair of new ECL emitters and a novel sensing mechanism was designed for the high-sensitivity detection of microRNA-141 (miRNA-141). Sulfur-doped boron nitrogen quantum dots (S-BN QDs) were initially employed to modify the cathode of the bipolar electrode (BPE), while the anode reservoir was [Ir(dfppy)2(bpy)]PF6/TPrA system. The next step involved attaching H1-bound ultra-small WO3-x nanodots (WO3-x NDs) to the S-BN QDs-modified BPE cathode via DNA hybridization. A strong surface plasmon coupling (SPC) effect was observed between S-BN QDs and WO3-x NDs, which allowed for the enhancement of the red and visible ECL emission from S-BN QDs. After target-induced cyclic amplification to produce abundant Zn2+ and Au NPs-DNA3-Au NPs (Au NPs-S3-Au NPs), Zn2+ could cleave DNA at a nucleotide sequence-specific recognition site to release the WO3-x NDs, resulting in the first diminution of cathode ECL signal and the first enhancement of anode ECL signal. Moreover, the ECL signal at cathode decreased for the second time and the emission of [Ir(dfppy)2(bpy)]PF6 was continuously enhanced after the introduction of Au nanoparticles-S3-Au nanoparticles on the cathode surface. Our sensing mode with a dual "on-off" signal conversion strategy shows a good detection capability for miRNAs ranging from 10-17 to 10-10 M, with a limit of detection (LOD) as low as 10-17 M, which has great application potential in biomedical research and clinical diagnosis.

A multichannel closed bipolar platform to visual electrochemiluminescence sensing of caffeic acid as a model: Potential for multiplex detection

In this study, a fully-featured electrochemiluminescence (ECL) sensing platform based on a multichannel closed bipolar system (closed-BP, C-BP) for the determination of caffeic acid (CA) was successfully developed. The system comprises three individual reservoirs connected to each other by two pairs of gold rods as bipolar electrodes. Moreover, a single pair of gold rods functions as the driving electrodes. Due to configuration consisting of three channels and double-bipolar electrodes, the detection of CA was accomplished in two oxidation and reduction pathways within a single device. Firstly, through close observation of the reactions occurring within the device and utilizing a universal pH indicator and bipolar electrodes, a precise mechanism for the current bipolar systems was initially proposed. Then, the concentration of CA was monitored in the reporting chamber through the following ECL intensities resulting from luminol oxidation and H2O2. The monitoring process was performed using both a photomultiplier tube (PMT) and a digital camera. In the process of analyte oxidation, the PMT and visual (camera)-based detection exhibited a linear response from 5 μmol L-1 to 700 μmol L-1 (limit of detection (LOD) 1.2 μmol L-1) and 50 μmol L-1 to 600 μmol L-1 (LOD 14.8 μmol L-1), respectively. In the analyte reduction pathway, the respective values were 30 μmol L-1 to 450 μmol L-1 (LOD 8.6 μmol L-1) and 55 μmol L-1 to 400 μmol L-1 (LOD 21.2 μmol L-1), for the PMT and visual-based detection, respectively. Our experiments have demonstrated the practical application of the sensor array for efficient and high-performance analysis. This innovative design holds significant potential for diverse fields and paves the way for the development of a user-friendly device.

Monitoring Bipolar Electrochemistry and Hydrogen Evolution Reaction of a Single Gold Microparticle under Sub-Micropipette Confinement

Herein, an approach to track the process of autorepeating bipolar reactions and hydrogen evolution reaction (HER) on a micro gold bipolar electrode (BPE) is established. Once blocking the channel of the sub-micropipette tip, the formed gold microparticle is polarized into the wireless BPE, which induces the dissolution of the gold at the anode and the HER at the cathode. The current response shows a periodic behavior with three regions: the bubble generation region (I), the bubble rupture/generation region (II), and the channel opening region (III). After a stable low baseline current of region I, a series of positive spike signals caused by single H2 nanobubbles rupture/generation are recorded standing for the beginning of region II. Meanwhile, the dissolution of the gold blocking at the orifice will create a new channel, increasing the baseline current for region III, where the synthesis of gold occurs again, resulting in another periodic response. Finite element simulations are applied to unveil the mechanism thermodynamically. In addition, the integral charge of the H2 nanobubbles in region II corresponds to the consumption of the anode gold. It simultaneously monitors autorepeating bipolar reactions of a single gold microparticle and HER of a single H2 nanobubble electrochemically, which reveals an insightful physicochemical mechanism in nanoscale confinement and makes the glass nanopore an ideal candidate to further reveal the heterogeneity of catalytic capability at the single particle level.

Shared-cathode closed bipolar electrochemiluminescence cloth-based chip for multiplex detection

Electrochemiluminescence (ECL) chips have been widely used in the field of medical diagnosis. However, most of these chips currently in use are costly and require high amounts of sample. In this work, we present, for the first time, a shared-cathode closed bipolar electrochemiluminescence (SC-CBP-ECL) cloth-based chip, which can be used for multiplex detection. The SC-CBP-ECL chips ($0.03-0.05 for each chip) are manufactured using carbon ink- and wax-based screen-printing techniques, without the need for expensive and complex fabrication equipment. Under optimised conditions, the SC-CBP-ECL chips were successfully used for coinstantaneous detection of glucose in double ECL systems (i.e., Ru(bpy)₃²⁺ and luminol), with corresponding linear ranges of 0.05-1 mM and 0.05-10 mM, and detection limits of 0.0382 mM and 0.0422 mM. To our knowledge, this is the first report on the application of fibre material-based closed bipolar electrodes (C-BPE) combined with double ECL systems. Furthermore, the SC-CBP-ECL chips exhibit an acceptable specificity and good reproducibility and stability and can be used for glucose detection in human serum samples with a good agreement compared with the clinical method. Finally, the SC-CBP-ECL chips could be successfully used for simultaneous detection of seven glucose samples and also show potential for simultaneous detection of three different targets (hydrogen peroxide [H₂O₂], glucose, and uric acid [UA]). Therefore, we believe that the chip described in this study has broad potential application in the field of cost-effective multiplex detection.

Proximity binding induced nucleic acid cascade amplification strategy for ultrasensitive homogeneous detection of PSA

In this work, based on the powerful cycle amplification cascades of proximity hybridization-induced hybridization chain reaction and catalyzed hairpin assembly, we engineered a nonenzymatic and ultrasensitive method which combined the Mg²⁺-DNAzyme recycling signal amplification for the analysis of the human prostate specific antigen. Herein, we adopted PSA-conjugates as triggers in the self-assembly process of two hairpin DNAs (H1, H2) into the products of the CHA which could activate the HCR to induce repeated hybridization. And both ends of each adjacent sequence of the HCR products could form a unit of Mg²⁺-DNAzyme which in presence of cofactor Mg²⁺ could recognize and cyclically cleave the hairpin probes in the solution and thus generate observably enhanced fluorescent signal. Benefit from the nucleic acid circuit amplification strategy, PSA of concentration low to 0.73 pg mL^-1 was detected in this system. This homogeneous sensing method in solution avoid the use of the sophisticated equipment and complex operation, as well as addition of artificial enzyme, thus greatly reducing the constraints and complexity of experimental conditions. Moreover, considering most protein biomarkers in serum don't have their corresponding aptamers, this sensing method provide a general sensing approach for homogeneous sensitive detection of these important protein biomarkers which transfer rough antigen-antibody interactivity to smart signal amplification sensing strategies, thus exhibiting a remarkable prospect in clinical application.

Bipolar (Bio)electroanalysis

This contribution reviews a selection of the most recent studies on the use of bipolar electrochemistry in the framework of analytical chemistry. Despite the fact that the concept is not new, with several important studies dating back to the middle of the last century, completely novel and very original approaches have emerged over the last decade. This current revival illustrates that scientists still (re)discover some exciting virtues of this approach, which are useful in many different areas, especially for tackling analytical challenges in an unconventional way. In several cases, this "wireless" electrochemistry strategy enables carrying out measurements that are simply not possible with classic electrochemical approaches. This review will hopefully stimulate new ideas and trigger scientists to integrate some aspects of bipolar electrochemistry in their work in order to drive the topic into yet unexplored and eventually completely unexpected directions.

Bipolar electrode ratiometric electrochemiluminescence biosensing analysis based on boron nitride quantum dots and biological release system

In this article, we developed a novel ECL ratiometry on a closed bipolar electrode (BPE) for the sensitively and accurately detection of miRNA-21. High quantum yield and low toxicity BNQDs was synthesized and coated at BPE cathode as an ECL emitter, while the anode of BPE was calibrated via another ECL material, Ir(df-ppy)₂(pic) (Firpic). The electron neutrality at both ends of the BPE electrically coupled the reactions on each pole of the BPE. Therefore, one electrochemical sensing reaction could be quantified at one end of the BPE. By the hybridization of target miRNA-21 and hairpin, the glucose blocked in MSNs by the hairpin was released and reacted with glucose oxidase (GOD) to generate H₂O₂, thereby reducing the ECL signal of the cathode BNQDs/K₂S₂O₈ system and promoting ECL signal of anode Firpic/TPrA. Further, the G-quadruplex formed by unreacted hairpin bases consumed H₂O₂, which not only recovered the ECL of BNQDs, but also further improved the ECL emission of Firpic. Therefore, the concentration of miRNA-21 could be measured by the ECL ratio of BNQDs and Firpic. The data showed that the detection limit was 10^-15 M (S/N = 3) with the linear range of 10^-15 M to 10^-9 M. The strategy of the BPE-ECL ratio method based on BNQDs showed a good prospect in clinical application.

Enhanced electrochemiluminescence ratiometric cytosensing based on surface plasmon resonance of Au nanoparticles and nanosucculent films

Ramos cells are human Burkitt's lymphoma cells, which are a kind of cancer cells to facilitate the monitoring of the relevant biological processes of cancers. Sensitive and accurate detection of Ramos cells using emerging ratiometric ECL biosensing technology shows increasing importance, however, the target analytes of current ratiometric ECL biosensors are mainly limited to DNA/RNA or proteins. In this study, we proposed a dual-potential ratiometric sensing strategy for the electrochemiluminescence detection of Ramos cells based on two types of electrochemiluminescence (ECL)-responding molecular. Au nanosucculent films (AuNFs) were electrodeposited on the fluorine doped tin oxide (FTO) electrode to increase the effective area of the electrode for more efficient assembly of DNA and effectively improving the conductivity of the sensing interfaces. In the presence of Ramos cells, aptamers capped with Au@luminol would conjugate with Ramos cells and then remove from AuNFs, accompanying the decrease of ECL signal from Au@luminol. Then, Au-DNA was captured and alternately hybridized with DNA-modified CdS nanocrystals (NCs) on the surface of AuNFs with the formation of a super reticulate structure. The reticulate structure not only raised another identified ECL signal from CdS NCs but also greatly promoted its ECL intensity from the surface plasmon resonance originating from Au NPs. The value of log (ECL_CdS/ECL_luminol) and the logarithm of the number of cells exhibit considerable linear relation ranging from 80 to 8 × 10⁵ cells mL^-1 with a low detection limit of 20 cells mL^-1 (S/N = 3). The selectivity and specificity of this dual-potential ECL sensor showed good performance and indicated considerable promise in avoiding false-positive results in detection.

Electrodeposition immobilized molybdenum disulfide quantum dots and their electrochemiluminescence application in the detection of melamine residues in milk powder

In this paper, one-step hydrothermal and electrodeposition methods were used to prepare a MoS2 quantum dot (QD) solid-phase electrochemiluminescent (ECL) electrode for the detection of melamine residues in milk powder. With the assistance of chitosan, MoS2 QDs fixed by the one-step electrodeposition method show better ECL performance than those by traditional deposition methods due to better dispersibility and stability. Based on the quenching of the MoS2 QDs ECL signal by melamine, quantitative detection of melamine in the sample was performed. The structure and morphology of a MoS2-CHIT/indium tin oxide (ITO) solid-phase ECL electrode were characterized by TEM and XPS, and melamine was detected by the ECL method using a three-electrode system. The proposed sensor exhibited good linearity in the range of 1.00 × 10-11 to 1.00 × 10-7 mol L-1 (ΔI = 12 100.62 + 1009.93 lg c (mol L-1), R2 = 0.997), and the method shows the advantages of simplicity and sensitivity compared to traditional detection methods. The interference of common ions in milk powder on the modified electrode was within 5%, and the recovery rate of real sample detection was within 97-98%. As a result, the proposed method is suitable for detecting melamine residues in milk powder.

Ultrasensitive Nucleic Acid Assay Based on Cyclometalated Iridium(III) Complex with High Electrochemiluminescence Efficiency

This work developed a sensitive electrochemiluminescence (ECL) biosensor based on a cyclometalated iridium(III) complex ((bt)₂Irbza), which was synthesized for the first time. Annihilation, reductive-oxidative, and oxidative-reductive ECL behaviors of (bt)₂Irbza were investigated, respectively. The oxidative-reductive ECL intensity was the strongest compared with the other two, which showed 16.7 times relative ECL efficiency compared with commercial [Ru(bpy)₃]²⁺ under the same experimental conditions. Therefore, an ECL biosensing system with (bt)₂Irbza as the anodic luminophore was established for miRNA detection based on a closed bipolar electrode (BPE). Combined with both steric hindrance and catalytic effects induced by hemin/G-quadruplex in the cathodic reservoir of BPE that changed the Faraday current of the cathode and thus mediated the ECL intensity of (bt)₂Irbza in the anode of BPE, the ECL sensor stated an ultrahigh sensitivity for microRNA (miRNA-122) analysis with a detection limit of 82 aM.

A ratiometric electrochemiluminescence sensing platform for robust ascorbic acid analysis based on a molecularly imprinted polymer modified bipolar electrode

Herein, a novel molecularly imprinted polymer (MIP) modified spatial-resolved "on-off" ratiometric electrochemiluminescence (ECL) sensing platform based on a closed bipolar electrode (BPE) has been reported for highly accurate and selective detection of ascorbic acid (AA). AA-imprinted MIP was decorated on the anode of the BPE, and Ru (bpy)₃²⁺ in the anode electrolyte served as anode-emitter, while ZnIn₂S₄ as the other ECL emitter was coated on the cathode. Rebinding of AA at anode promoted ECL response of ZnIn₂S₄ (440 nm) at cathode. Meanwhile, the ECL response at 605 nm decreased, arising from the hindered reaction of Ru (bpy)₃²⁺ on the anode surface. Therefore, an "on-off" BPE-ECL sensing platform was fabricated and showed distinguished performance in repeatability and selectivity thanks to the ratio correction effect and the specific recognition from MIP. The linear range for AA detection is from 50 nM to 3 μM with a low detection limit of 20 nM (S/N = 3). The assay deviation of the ratio responses largely declined by about 15 and 5 times compared with the ones from single pole in the aspect of repeatability and long-term stability, respectively. This work provides a reliable and stable sensing pattern for practical application, which also furnishes a strategy for designing simple and low-cost ECL sensing devices.

Enhanced biosensing strategies using electrogenerated chemiluminescence: recent progress and future prospects

An overview of enhancement strategies for highly sensitive ECL-based sensing of bioanalytes enabling early detection of cancer.

Introducing graphitic carbon nitride nanosheets as supersandwich-type assembly on porous electrode for ultrasensitive electrochemiluminescence immunosensing

Biomarkers in blood or tissue provide essential information for clinical screening and early disease diagnosis. However, increasing the sensitivity of detecting biomarkers remains a major challenge in a wide variety of electrochemical immunoassays. Herein, we present an electrochemiluminescence (ECL) immunosensing strategy with 1: Nⁿ amplification ratio (target-to-signal probe) for biomarkers detection on a porous gold electrode. The high porosity of the electrode surface provides enough bonding sites for capturing the target biomolecules and thus many DNA labels can be introduced. On the basis of this concept, a great number of graphitic carbon nitride (g-C₃N₄) nanosheets are employed to create a supersandwich-type assembly on a porous electrode via the DNA hybridization process. Furthermore, compared with the traditional sandwich immunoassay (the ratio of target-to-signal probe is 1 : 1), the supersandwich construction can introduce a large number of signal probes, thus resulting in a highly improved sensitivity. The proposed ECL immunosensor exhibits an excellent performance in a concentration range from 0.01 fg mL^-1 to 1 μg mL^-1 with an ultralow detection limit of 0.001 fg mL^-1 (S/N = 3) and excellent selectivity. This sensing strategy could be developed into a real-time assay for the disease-related molecular targets, with many practical applications in biotechnology and life science.

Dual amplification ratiometric biosensor based on a DNA tetrahedron nanostructure and hybridization chain reaction for the ultrasensitive detection of microRNA-133a

A novel ratiometric electrochemiluminescence (ECL)-electrochemical (EC) hybrid biosensor with a high accuracy and reproducibility was fabricated for the ultrasensitive detection of miRNA-133a. With the help of a DNA tetrahedron nanostructure and hybridization chain reaction dual amplification strategy, the detection limit of 12.17 aM for miRNA-133a was obtained.

Aptamer-based electrochemical cytosensors for tumor cell detection in cancer diagnosis: A review

Circulating tumor cells, a type of viable cancer cell circulating from primary or metastatic tumors in the blood stream, can lead to the parallel development of primary tumors and metastatic lesions. Highly selective and sensitive detection of tumor cells has become a hot research topic and can provide a basis for early diagnosis of cancers and anticancer drug evaluation to develop the best treatment plan. Aptamers are single-stranded oligonucleotides that can bind to target tumor cells in unique three-dimensional structures with high specificity and affinity. Aptamer-based methods or signal amplification methods using aptamers show great potential in improving the selectivity and sensitivity of electrochemical (EC) cytosensors for tumor cell detection. This review covers the remarkable developments in aptamer-based EC cytosensors for the identification of cell type, cell counting and detection of crucial proteins on the cell surface. Various EC techniques have been developed for cancer cell detection, including common voltammetry or impedance, electrochemiluminescence and photoelectrochemistry in a direct approach (aptamer-target cell), sandwich approach (capture probe-target cell-signaling probe) or other approach. The current challenges and promising opportunities in the establishment of EC aptamer cytosensors for tumor cell detection are also discussed.

Application of various optical and electrochemical aptasensors for detection of human prostate specific antigen: A review

Early stage detection of prostate cancer, one of the main causes of mortality among men, is of great importance for better treatment of the patients. Prostate specific antigen (PSA) is a glycoprotein which has been considered as the most potential serological biomarker for the detection of prostate cancer. Among the various techniques employed for PSA detection, aptamer-based biosensors (aptasensors) have achieved notable attention because of their unique features and great potentials as diagnostic tools. A variety of strategies such as integration of nanomaterials (NMs) into the structure of aptasensors have also been applied for enhancing the sensitivity of PSA detection. This article reviews recent advances in various optical and electrochemical aptasensors used for PSA detection.

Bipolar electrode-electrochemiluminescence (ECL) biosensor based on a hybridization chain reaction

A novel electrochemiluminescence (ECL) closed bipolar electrode (BPE) chip was designed based on a hybridization chain reaction (HCR)-induced ECL amplification strategy for the detection of both DNA and H₂O₂. Without the utilization of a patterned ITO bipolar electrode (BPE), this chip platform consisted of an ITO glass coated with two layers of PDMS slices. The ITO cathode was modified with Au nanoparticles for further functionalization of biomolecules, which could also amplify the ECL signal at the anode of the BPE. Based on the specific hybridization and hybridization chain reaction (HCR), DNA sequences were greatly extended, leading to a significant increase in the resistance of the cathode. The reduction of H₂O₂ was inhibited on the cathode of the BPE, resulting in a quenching effect on the ECL intensity on the anode of the BPE. The designed biosensor displayed a satisfactory linear relationship for the detection of both DNA and H₂O₂. Therefore, the biosensor could not only be employed for DNA assays but also used in enzyme reactions based on the generation of H₂O₂.

Recent advances of ratiometric electrochemiluminescence biosensors

Ratiometric electrochemiluminescence (ECL) assays have been widely applied in biosensing because of eliminated outside interferences and improved reliability in detection.

Direct Observation of Oxidation Reaction via Closed Bipolar Electrode-Anodic Electrochemiluminescence Protocol: Structural Property and Sensing Applications

In this work, we developed an innovative closed bipolar electrode (BPE)-electrochemiluminescence (ECL) sensing strategy with generality for target detection. Based on charge balance and 100% current efficiency between the closed BPE poles and the driving electrodes, one of the driving electrodes in one cell of the closed BPE system was employed as ECL sensing surface to reflect the target on the BPE pole in the opposite cell. Compared with traditional BPE-ECL sensing method, which in general adopted the anodic ECL reagents such as Ru(bpy)₃²⁺ and its coreactant on one pole (anode) to reflect the target (occurring reduction reaction) on the other pole (cathode), the difference was that the targets occurring oxidation reaction could be detected by the anodic ECL reagents based on this strategy. To verify the feasibility of this strategy, the detection principle was stated first, and Fe(CN)₆^4- as model target at anodic BPE pole were detected by anodic ECL reagents (Ru(bpy)₃²⁺ and TprA) on the driving electrode first. The ECL signals showed good performance for target detection. By changing the size and the material of the BPE pole where the targets were located, the detection of l-ascorbic acid (AA), uric acid (UA), and dopamine (DA) as other model targets with higher detection limit were accomplished. Visual and high-throughput detection of AA, UA, and DA were also successfully realized by an array of the closed BPE system. This closed BPE (array) system is an effective supplement of traditional BPE-ECL sensing and could greatly expand the scope of the detection target.

Spectrum-Resolved Triplex-Color Electrochemiluminescence Multiplexing Immunoassay with Highly-Passivated Nanocrystals as Tags

Nanocrystals (NCs) were extensively employed in optical-multiplexing with their size-dependent and narrow waveband photoluminescence (PL). Herein, to achieve NCs-based novel optical-multiplexing strategy with improved sensitivity, a spectrum-resolved triplex-color electrochemiluminescence (ECL) multiplexing immunoassay (MIA) was proposed for the first time by extensively exploring the color-different monochromatic ECL from dual-stabilizers-capped CdTe and CdSe NCs and the inherent lower background of ECL than PL. As a proof of concept, carcinoembryonic antigen (CEA), prostate specific antigen (PSA), and alpha fetoprotein (AFP) were adopted as model analytes and formed three antigen-NCs pairs at the glassy carbon electrode surface via a one-pot immune-reaction with CdSe(550), CdTe(650), and CdTe(776) NCs as tags, respectively. The spectral ECL responses of three antigen-NCs pairs were simultaneously measured via one-pot ECL assay, and the maximum ECL intensity of each tag was directly utilized to determine corresponding antigen without any assistance from either optical filters or signal deconvolution. This ECL-MIA displayed negligible cross-reactivity, high color-selectivity, and excellent sensitivity with limits of detection down to 1, 10, and 0.01 pg/mL for CEA, PSA, and AFP, respectively, which might provide a promising alternative to NCs PL multiplexing.

A novel mode of DNA assembly at electrode and its application to protein quantification

Sensitive and specific detection of protein is of great significance for early diagnosis and prognosis of many diseases. However, great challenges remain unsolved including relative low sensitivity, high cost, long testing time, complicated instrument and laborious operation. To improve the performance of protein detection methods, development of fine reaction interface for recognition and signal amplification is of great importance. In this work, we construct a novel mode of DNA assembly at electrode interface based on a tripodal surface anchor and an electrochemical aptasensor for protein assay is developed. The orientation of the immobilized DNA is optimized, which promises the efficiency of protein recognition. In addition, hybridization chain reaction is employed for further signal amplification. Therefore, this detection method shows high sensitivity with excellent specificity. The strategy can be universally applicable by simply modifying the sequences of used DNA probes.

Bidirectional Electrochemiluminescence Color Switch: An Application in Detecting Multimarkers of Prostate Cancer

A selective excitation of [Ir(df-ppy)₂(pic)] and [Ru(bpy)₃]²⁺ through tuning the electrode potential is reported in this work. Bidirectional color change from blue-green to red could be observed along with increase and decrease of the potential, which was ascribed to the dual-potential excitation property of [Ir(df-ppy)₂(pic)]. Similar to the three-electrode system, selective excitation of ECL could be achieved at the anode of the bipolar electrode (BPE). Both increase and decrease of the faradic reactions at the cathode of the BPE could induce ECL reporting color at the other pole switched from blue-green to red. We applied a closed BPE device for the bioanalysis of multicolor ECL since the organic solvent containing electrochemiluminophores could be separated from the bioanalytes. On the basis of BPE arrays coupled with the ECL switch, the detection of three biomarkers of prostate cancer, PSA, microRNA-141, and sarcosine were integrated in a same device. The cutoff values of the biomarkers could be recognized directly by the naked eye. Such a device holds great potential in the early diagnosis of prostate cancer.

Graphitic-phase carbon nitride-based electrochemiluminescence sensing analyses: recent advances and perspectives

This review describes the current trends in synthesis methods, signaling strategies, and sensing applications of g-C₃N₄-based ECL emitters.

Electrochemiluminescence biosensing based on different modes of switching signals

Electrochemiluminescence (ECL) has attracted much attention in various fields of analysis owing to low background signals, high sensitivity, and excellent controllability.

An ultrasensitive label-free electrochemiluminescent immunosensor for measuring Cry1Ab level and genetically modified crops content

The development of genetically modified (GM) insect-resistant crops has aroused great public concern about the risks on the eco-environment resulting from a release of toxic Cry proteins (such as Cry1Ab) to the soil. Therefore, it is of crucial importance to measure the Cry proteins level and the GM crops content. Here, we have tested for the first time a method that uses novel carbon nanospheres (CNPs) label-free electrochemiluminescent (ECL) immunosensor for the ultrasensitive quantification of Cry1Ab and GM crops. In this work, novel CNPs were prepared from printer toner with a very facile approach, and linked with anti-Cry1Ab antibodies to modify a golden working electrode. The immunoreaction between Cry1Ab and its antibody formed an immunocomplex on the bioreceptor region of the sensor, which inhibited electron transfer between the electrode surface and the ECL substance, leading to a decrease of ECL response. Under the optimal conditions, the fabricated label-free ECL immunosensor determined Cry1Ab down to 3.0pgmL^-1 within a linear range of 0.010-1.0ngmL^-1, showing significant improvement of sensitivity than that of most previous reports. Meanwhile, the proposed method was successfully applied for GM rice BT63 and GM maize MON810 detections down to 0.010% and 0.020%, respectively. Due to its outstanding advantages such as high sensitivity, ideal selectivity, simple fabrication, rapid detection, and low cost, the developed method can be considered as a powerful and pioneering tool for GM crops detection. Its use can also be extended to other toxin protein sensing in foods.

Bipolar Electrodes with 100% Current Efficiency for Sensors

A bipolar electrode (BPE) is an electron conductor that is embedded in the electrolyte solution without the direct connection with the external power source (driving electrode). When the sufficient voltage was provided, the two poles of BPE promote different oxidation and reduction reactions. During the past few years, BPEs with wireless feature and easy integration showed great promise in the various fields including asymmetric modification/synthesis, motion control, targets enrichment/separation, and chemical sensing/biosensing combined with the quantitative relationship between two poles of BPE. In this perspective paper, we first describe the concept and history of the BPE for analytical chemistry and then review the recent developments in the application of BPEs for sensing with ultrahigh current efficiency (η_c = i_BPE/i_channel) including the open and closed bipolar system. Finally, we offer the guide for possible challenge faced and solution in the future.

Determination of pentachlorophenol by anodic electrochemiluminescence of Ru(bpy)32+ based on nitrogen-doped graphene quantum dots as co-reactant

A novel ultrasensitive Ru(bpy)₃²⁺-based anodic ECL sensor using NGQDs as co-reactant was developed for PCP detection.

A bio-chemical application of N-GQDs and g-C3N4 QDs sensitized TiO2 nanopillars for the quantitative detection of pcDNA3-HBV

Herein, TiO₂ nanopillars (NPs)/N-doped graphene quantum dots (N-GQDs)/g-C₃N₄ QDs heterojunction efficiently suppressed the photogenerated charges recombination and improved photo-to-current conversion efficiency. The introduced N-GQDs and g-C₃N₄ QDs could result in more effective separation of the photogenerated charges, and thus produce a further increase of the photocurrent. TiO₂ NPs/N-GQDs/g-C₃N₄ QDs were firstly applied as the photoactive materials for the fabrication of the biosensors, and the primers of pcDNA3-HBV were then adsorbed on the TiO₂ NPs/N-GQDs/g-C₃N₄ QDs modified electrode under the activation of EDC/NHS. With increase of the pcDNA3-HBV concentration, the photocurrent reduced once the double helix between the primers and pcDNA3-HBV formed. The developed photoelectrochemical (PEC) biosensor showed a sensitive response to pcDNA3-HBV in a linear range of 0.01 fmol/L to 20nmol/L with a detection limit of 0.005 fmol/L under the optimal conditions. The biosensor exhibited high sensitivity, good selectivity, good stability and reproducibility.