Electrogenerated chemiluminescence of Si quantum dots in neutral aqueous solution and its biosensing application

Observation of anodic electrochemiluminescence from silicon quantum dots for the detection of hydrogen peroxide

Silicon quantum dots (QDs) with stable positively charged intermediates are prepared using chemical etching to generate strong anodic electrochemiluminescence (ECL) under a positive potential. Their surfaces could be passivated in the presence of strong oxidants, leading to enhanced ECL and offering the ability to carry out analysis for hydrogen peroxide.

Electrochemiluminescence resonance energy transfer immunoassay based on a porphyrin metal-organic framework and AuNPs/NSG for the sensitive detection of zearalenone

In this study, a novel electrochemiluminescence resonance energy transfer (ECL-RET) immunoassay was developed for the first time for the detection of zearalenone (ZEN). A porphyrin metal-organic framework (PCN-222), an emerging porphyrin-based ECL luminophore, was prepared by a simple hydrothermal method using tetrakis(4-carboxyphenyl) porphyrin, which has excellent ECL emission as well as good ECL efficiency. Because the ECL emission spectrum of PCN-222 is highly matched to the absorption spectrum of gold nanoparticle-modified graphene oxide (AuNPs/NSG) nanocomposites, they were used as donor-acceptor counterparts in this work for the ECL-RET strategy. Under optimal conditions, the ECL immunosensor showed a sensitive response to ZEN in a wide detection range, with a linearity of 0.0005-1000 ng mL-1 and a detection limit of 0.15 pg mL-1. In addition, the sensor showed good potential for application in the detection of wheat and corn samples, providing a new approach for the detection of mycotoxin-like contaminants such as ZEN in food grains.

Electrochemiluminescent CdS Quantum Dots Biosensor for Cancer Mutation Detection at Different Positions on Linear DNA Analytes

PCR-based techniques routinely employed for the detection of mutated linear DNA molecules, including circulating tumor DNA (ctDNA), require large nucleotide sections on both sides of the mutation for primer annealing. This means that DNA fragments with a mutation positioned closer to the extremities are unlikely to be detected. Thus, sensors capable of recognizing linear DNA with characteristic mutations closer to the ends would be advantageous over the state-of-the-art approaches. Here, an electrochemiluminescence-resonance energy transfer (ECL-RET) biosensor comprising capped CdS quantum dots and hairpin DNA probes labeled with Au nanoparticles was developed for the detection of epidermal growth factor receptor (EGFR) ctDNA carrying the critical T790M lung cancer mutation. The ECL-RET system detected different DNA molecules including single-stranded 18-nucleotides (nt) and 40-nt as well as double-stranded 100-nt with the single nucleotide polymorphism (SNP) coding for T790M located either in the middle or only 7 nt from one end. For all target DNA, the sensor's limits of detection (LODs) were in the aM range, with excellent selectivity. It was the case of 100-nt target linear ctDNA fragments with LODs of 8.1 and 3.4 aM when the EGFR T790M SNP was either in the middle or at the end, respectively. These results show that ECL-RET systems can sense mutations in DNA fragments that would remain undetected by standard techniques.

Electrochemiluminescence of Semiconductor Quantum Dots and Its Biosensing Applications: A Comprehensive Review

Electrochemiluminescence (ECL) is the chemiluminescence triggered by electrochemical reactions. Due to the unique excitation mode and inherent low background, ECL has been a powerful analytical technique to be widely used in biosensing and imaging. As an emerging ECL luminophore, semiconductor quantum dots (QDs) have apparent advantages over traditional molecular luminophores in terms of luminescence efficiency and signal modulation ability. Therefore, the development of an efficient ECL system with QDs as luminophores is of great significance to improve the sensitivity and detection flux of ECL biosensors. In this review, we give a comprehensive summary of recent advances in ECL using semiconductor QDs as luminophores. The luminescence process and ECL mechanism of semiconductor QDs with various coreactants are discussed first. Specifically, the influence of surface defects on ECL performance of semiconductor QDs is emphasized and several typical ECL enhancement strategies are summarized. Then, the applications of semiconductor QDs in ECL biosensing are overviewed, including immunoassay, nucleic acid analysis and the detection of small molecules. Finally, the challenges and prospects of semiconductor QDs as ECL luminophores in biosensing are featured.

A dry chemistry-based electrochemiluminescence device for point-of-care testing of alanine transaminase

Liver disease causes serious public health problems because of its high prevalence, particularly affecting low- and middle-income countries. Alanine transaminase (ALT) is considered to be one of the most sensitive indicators for diagnosing liver disease. Although many strategies have been reported for ALT detection, few of them have solved the problem of automatic detection. In this work, for the first time, a dry chemistry-based electrochemiluminescence (DC-ECL) device is developed for point-of-care testing (POCT) of ALT, achieving real sample-to-answer detection. The proposed DC-ECL device consists of the following two components: (a) a DC-ECL chip consisting of the outer shell (including the top cap and pedestal) and detection layer (including the baseplate, electrode pad and carrier pad) and (b) an automatic ECL analyzer mainly including the data processing and instrument control unit, imaging detection unit, electrochemical reaction excitation unit, open detection window unit and rechargeable power supply. Under optimized conditions, the device had a wide detection range (0-1000 U/L), the ECL intensity linearly increased with ALT concentration (5-50 U/L) and logarithmic ALT concentration (50-1000 U/L), and the limit of detection was calculated to be 1.702 U/L. In addition, the DC-ECL device had the ability to measure ALT levels in human serum samples and showed acceptable selectivity, stability and repeatability. These results reveal that the DC-ECL device can overcome the disadvantages of traditional methods for ALT detection (such as high cost and requirement of professional technicians) and potentially opens the door to the development of similar POCT analyzers.

Gold nanoparticle-based signal amplified electrochemiluminescence for biosensing applications

Since the content levels of biomarkers at the early stage of many diseases are generally lower than the detection threshold concentration, achieving ultrasensitive and accurate detection of these biomarkers is still one of the major goals in bio-analysis. To achieve ultrasensitive and reliable bioassay, it requires developing highly sensitive biosensors. Among all kinds of biosensors, electrogenerated chemiluminescence (ECL) based biosensors have attracted enormous attention due to their excellent properties. In order to improve the performance of ECL biosensors, gold nanoparticles (Au NPs) have been widely utilized as signal amplification tags. The introduction of Au NPs could dramatically enhance the performance of the constructed ECL biosensors via diverse ways such as electrode modification material, efficient energy acceptor in ECL resonant energy transfer (ECL-RET), reaction catalyst, surface plasmon resonance (SPR) enhancer, and as nanocarrier. Herein, we summarize recent developments and progress of ECL biosensors based on Au NPs signal amplification strategies. We will cover ECL applications of Au NPs as a signal amplification tag in the detection of proteins, metal ions, nucleic acids, small molecules, living cells, exosomes, and cell imaging. Finally, brief summary and future outlooks of this field will be presented.

Fluorescence determination of lactate dehydrogenase activity based on silicon quantum dots

Silicon quantum dots (SiQDs) synthesized based on 3-aminopropyltrimethoxysilane (ATPMS) as silicon source were used to detect the activity of lactate dehydrogenase (LDH) through changes of fluorescence intensity of SiQDs. In this system, the fluorescence of SiQDs was first quenched by nicotinamide adenine dinucleotide (NADH), and then recovered with the addition of LDH, as NADH was consumed by catalytic reaction of LDH. A linear calibration chart of LDH is obtained in the range of 0.77-385 U/mL. The assay displays high selectivity towards LDH detection, and was successfully applied to the analysis of LDH in human serum samples. This assay has great prospects for the diagnosis and prognosis of various diseases, especially melanoma.

An electrochemiluminescence resonance energy transfer biosensor for the detection of circulating tumor DNA from blood plasma

A liquid biopsy is a noninvasive approach for detecting double-stranded circulating tumor DNA (ctDNA) of 90-320 nucleotides in blood plasma from patients with cancer. Most techniques employed for ctDNA detection are time consuming and require expensive DNA purification kits. Electrochemiluminescence resonance energy transfer (ECL-RET) biosensors exhibit high sensitivity, a wide response range, and are promising for straightforward sensing applications. Until now, ECL-RET biosensors have been designed for sensing short single-stranded oligonucleotides of less than 45 nucleotides. In this work, an ECL-RET biosensor comprising graphitic carbon nitride quantum dots was assessed for the amplification-free detection in the blood plasma of DNA molecules coding for the EGFR L858R mutation, which is associated with non-small-cell lung cancer. Following a low-cost pre-treatment, the highly specific ECL-RET biosensor quantified double-stranded EGFR L858R DNA of 159 nucleotides diluted into the blood within a linear range of 0.01 fM to 1 pM, demonstrating its potential for noninvasive biopsies.

Hydrophilic silicon nanoparticles as a turn-off and colorimetric fluorescent probe for curcuminoids detection in food samples and cell imaging

Hydrophilic fluorescent silicon nanoparticles (SiNPs) with good pH stability, salt-tolerance and anti-photobleaching were for the first time prepared from hydrophobic 3-glycidoxypropyltrimethoxysilane. Employing SiNPs as the fluorescence probe, selective quantification of curcuminoids based on the quenching effect was realized with a linearity of 0.046-7.4 μg/mL and a limit of detection of 17.6 ng/mL. Moreover, in light of fluorescence redshift of SiNPs corresponding to the elevated concentration of curcuminoids, a fluorescence colorimetric method was established based on only one extra probe, i.e. herein SiNPs. Thus, semi-quantification of curcuminoids (0-14.7 μg/mL) was visualized from blue to yellow color. Both the developed quantitative and semi-quantitative probe were successfully applied to determine curcuminoids in various actual food samples. Furthermore, SiNPs possessed low cytotoxicity and succeeded in intracellular curcuminoids imaging. The proposed SiNPs could be a promising fluorescence probe for multiple applications.

Determination of Fe(Ⅲ) ion and cellular bioimaging based on a novel photoluminescent silicon nanoparticles

The determination approaches of Fe (Ⅲ) in biological samples were developed by a novel water-soluble silicon nanoparticles (SiNPs). The SiNPs were synthesized by a facile microwave-assisted method, and simultaneously featured strong blue fluorescence (photoluminescence quantum yield: 25.2%), long lifetime (~13.29 ns) and good photo-stability. The fluorescence intensities of SiNPs were gradually quenched with Fe (Ⅲ) concentration increasing from 2.0 to 50 μmol/L. The detection limit of the established method was 0.56 μmol/L and the precision for eleven replicate detections of 20 μmol/L Fe (Ⅲ) was 3.2% (relative standard deviation, RSD). The spiked recoveries were 99.0%-104.5%. Results of the lifetime decay and cyclic voltammetry (CV) evidenced that the electron transfer was responsible for the fluorescence quenching mechanism of SiNPs and Fe (Ⅲ). Moreover, the SiNPs were successfully applied in the determination of Fe(Ⅲ) in different environmental waters and human serum. Finally, the resulting SiNPs exhibited the green fluorescence in HeLa cells as the optical probe.

Ultrasensitive detection of cyclin D1 by a self-enhanced ECL immunosensor based on Bi2S3 quantum dots

Bismuth sulfide quantum dots (Bi₂S₃ QDs), which have excellent optical and thermoelectric properties, represent a green and non-toxic semiconductor material that has been widely used in catalysis and photoelectric conversion devices. At present, research on this material has gradually expanded into the biological field. Herein, the biomineralization method mediated by bovine serum albumin (BSA) was utilized to synthesize Bi₂S₃ QDs with monodispersity, excellent colloidal stability, and good biocompatibility. This is the first study on the electrochemiluminescence (ECL) characteristics of Bi₂S₃ QDs and related ECL mechanisms in detail. In addition, on the basis of Bi₂S₃ QDs, an ECL immunosensor was used for the ultrasensitive measurement of cyclin D1 (CCND1). The composite material, namely Au@Cu-Bi₂S₃ QDs was used as a high-sensitivity ECL probe, in which AuNPs were connected with Bi₂S₃ QDs through a copper(ii) ion bridge. PDA-AgNPs made of dopamine (DA) and silver nanoparticles (AgNPs) were utilized as a carrier for fixing the primary antibody (Ab₁), ultimately presenting a relatively wide detection range of 10 fg mL^-1-1 μg mL^-1. Moreover, quite a low detection limit (6.34 fg mL^-1) was also obtained for an assay of CCND1. Results indicated that the immunosensor can provide a potential platform with fine stability and creditable reproducibility for clinical diagnosis.

Advances in chemiluminescence and electrogenerated chemiluminescence based on silicon nanomaterials

Since 1950, when chemiluminescence (CL) of siloxane upon treatment with strong oxidants was discovered by Kurtz, many silicon-based nanomaterials with different elements, specific molecules, shapes and sizes have been developed as light emitters, energy acceptors, and catalyzers to provide valuable CL and electrogenerated CL (ECL) detection platforms in analytical chemistry fields. This review mainly focuses on the recent development of their mechanisms and sensing methodologies for small molecules, free radicals, ion, enzyme, protein, DNA, cancer cells, and metabolites based on specific reactions such as aptamer sensing and enzymatic reaction. Additionally, the future trend is discussed.

Electrochemiluminescence biosensing based on different modes of switching signals

Electrochemiluminescence (ECL) has attracted much attention in various fields of analysis owing to low background signals, high sensitivity, and excellent controllability.

Toward Universal SERS Detection of Disease Signaling Bioanalytes Using 3D Self-Assembled Nonplasmonic near-Quantum-Scale Silicon Probe

Currently, the quantum-scale surface-enhanced Raman scattering (SERS) properties of Si materials have yet to be discovered for universal biosensing applications. In this study, a potential universal biosensing probe is generated by activating the SERS functionality of Si nanostructures through near quantum-scale (nQS) engineering. We introduce herein 3D nonplasmonic Si nanomesh structure with nQS defects for SERS biosensing applications. Through ionization of a single-crystal defect-free Si wafer, highly defect-rich Si subnano-orbs (sNOs) are fabricated and self-assemble as connective 3D Si nanomesh structures with enhanced SERS biosensing activity. By amending the laser ionization and ion-ion interactions, we observe the controlled synthesis of engineered nQS defects in the form of nQS-grain boundary disorder or surface nQS voids within the interconnected Si sNOs. To our knowledge, it is shown here for the first time that defect-rich Si nanomesh structures exhibit enhanced Raman activity, with the nQS morphological and crystallographic defects acting as the prime SERS contributors without a plasmonic contribution. The SERS biosensing sensitivity with the synthesized defect-rich Si nanomesh structures without an additional plasmonic material was evaluated using of a tripeptide biomarker l-glutathione (GSH); we observe an enhancement factor value of ∼10² for the GSH biomolecules with 10^-9 M sensitivity, a phenomena to our knowledge that has yet to be reported. Additionally, the SERS detection of multiple disease-signaling biomolecules (cysteine, tryptophan, and methionine) is achieved at very low analyte concentration (10^-9 M). These results indicate a potential new dimension to universal SERS biosensing applications with these unique nonplasmonic defect-rich 3D nQS-Si nanostructures.

Novel Biomimic Crystalline Colloidal Array for Fast Detection of Trace Parathion

A novel gold doped inverse opal photonic crystal (IO PC) was successfully fabricated with combination of molecularly imprinted technical for the fast determination of parathion. First, a closest silica array arrangement behaved as the 3D photonic crystal precursors to build the opal photonic crystal (O PC). Second, the parathion-containing polymeric solution with gold nanoparticles was drawn into the 3D array cracks. After polymerization, the well-designed O PC was treated with HF solution for the etching of the silica skeleton. Finally, the template parathion was removed and the Au-MIP IO PCs were obtained. The morphology of SiO₂ and Au NPs was characterized by transmission electron microscopy (TEM), and the eluted influence of the IO PCs was monitored by scanning electron microscopy (SEM). The cross-linking effect was well optimized according to the best spectrum signal of parathion. The as-synthesized Au-MIP IO PCs displayed the specificity toward parathion and the selectivity to other competitive pesticide molecules. The response time was only 5 min, and the parathion could be well detected from real water samples. The recoveries were between 95.5% and 101.5%.

Effect of argon flow on promoting boron doping for in-situ grown silicon nitride thin films containing silicon quantum dots

Boron-doped silicon nitride thin films (SiN_x) containing silicon quantum dots (Si QD) were prepared in situ by plasma enhanced chemical vapor deposition. With the aim of optimizing the performance of thin films, the mixed gas including argon and hydrogen was applied as dilution. The effects of Ar flow on the structural, electrical and optical properties of B-doped SiN_x thin films were systemically studied through various characterizations. By tuning the Ar flow, the properties, such as QD size, crystallinity and optical band gap, can be effectively controlled. The B-doping efficiency in thin films was proved to be promoted by introducing moderate Ar flow. The maximum values of dark conductivity (1.52 S cm^-1) and carrier concentration (2.41 × 10¹⁹ cm^-3) were obtained for the B-doped SiN_x thin films at the Ar flow of 200 sccm. Furthermore, the mechanism on the promotion in B-doping was illustrated in detail in this paper.