Electrochemical latent redox ratiometric probes for real-time tracking and quantification of endogenous hydrogen sulfide production in living cells

Self-Immolative Electrochemical Redox Substrates: Emerging Artificial Receptors in Sensing and Biosensing

The development of artificial receptors has great significance in measurement science and technology. The need for a robust version of natural receptors is getting increased attention because the cost of natural receptors is still high along with storage difficulties. Aptamers, imprinted polymers, and nanozymes are some of the matured artificial receptors in analytical chemistry. Recently, a new direction has been discovered by organic chemists, who can synthesize robust, activity-based, self-immolative organic molecules that have artificial receptor properties for the targeted analytes. Specifically designed trigger moieties implant selectivity and sensitivity. These latent electrochemical redox substrates are highly stable, mass-producible, inexpensive, and eco-friendly. Combining redox substrates with the merits of electrochemical techniques is a good opportunity to establish a new direction in artificial receptors. This Review provides an overview of electrochemical redox substrate design, anatomy, benefits, and biosensing potential. A proper understanding of molecular design can lead to the development of a library of novel self-immolative redox molecules that would have huge implications for measurement science and technology.

Development of europium(III) complex fluorescent probe for hydrogen sulfide detection and its application in water samples

Hydrogen sulfide (H2 S) is a crucial endogenous signaling component in organisms that is involved in redox homeostasis and numerous biological processes. Modern medical research has confirmed that hydrogen sulfide plays an important role in the pathogenesis of many diseases. Herein, a fluorescent probe Eu(ttbd)3 abt based on europium(III) complex was designed and synthesized for the detection of H2 S. Eu(ttbd)3 abt exhibited significant quenching for H2 S at long emission wavelength (625 nm), with rapid detection ability (less than 2 min), high sensitivity [limit of detection (LOD) = 0.41 μM], and massive Stokes shift (300 nm). Additionally, this probe showed superior selectivity for H2 S despite the presence of other possible interference species such as biothiols. Furthermore, the probe Eu(ttbd)3 abt was successfully applied to detect H2 S in water samples.

Screening of H2S donors with a red emission mitochondria-targetable fluorescent probe: Toward discovering a new therapeutic strategy for Parkinson's disease

Parkinson's disease (PD) is a neurodegenerative disorder caused by various factors such as neuroinflammation, oxidative stress, mitochondrial dysfunction, and neuronal apoptosis. Recent studies have shown that H2S supplementation reverses neuronal loss and mitigates motor deficits in PD patients through anti-inflammatory, antioxidant, improved mitochondrial function and proautophagic. Therefore, the discovery and use of H2S donors may be an exciting and intriguing strategy for the treatment of PD. Herein, we report a red emission mitochondria-targetable fluorescent probe, Rho-H2S, which can specifically and sensitively detect H2S with a limit of detection of 62.5 nM. Bioimaging experiments have shown that the probe has excellent mitochondrial targeting and good imaging capabilities for the detection of exogenous and endogenous H2S in cells. More importantly, based on the Rho-H2S probe, we first confirmed the sulforaphane (SFN) among 15 glucosinolate and isothiocyanate compounds from cruciferous vegetables with an outstanding ability to release H2S and we further proved that SFN could alleviate the symptoms of PD in vivo. All results demonstrate that Rho-H2S could be an effective tool for screening H2S donors and can contribute to the development of new therapeutic strategies for PD.

Dual-Mode Ratiometric Electrochemical and Turn-On Fluorescent Detection of Butyrylcholinesterase Utilizing a Single Probe for the Diagnosis of Alzheimer's Disease

Biomarkers detection in blood with high accuracy is crucial for the diagnosis and treatment of many diseases. In this study, the proof-of-concept fabrication of a dual-mode sensor based on a single probe (Re-BChE) using a dual-signaling electrochemical ratiometric strategy and a "turn-on" fluorescent method is presented. The probe Re-BChE was synthesized in a single step and demonstrated dual mode response toward butyrylcholinesterase (BChE), a promising biomarker of Alzheimer's disease (AD). Due to the specific hydrolysis reaction, the probe Re-BChE demonstrated a turn-on current response for BChE at -0.28 V, followed by a turn-off current response at -0.18 V, while the fluorescence spectrum demonstrated a turn-on response with an emission wavelength of 600 nm. The developed ratiometric electrochemical sensor and fluorescence detection demonstrated high sensitivity with BChE concentrations with a low detection limit of 0.08 μg mL^-1 and 0.05 μg mL^-1, respectively. Importantly, the dual-mode sensor presents the following advantages: (1) dual-mode readout can correct the impact of systematic or background error, thereby achieving more accurate results; (2) the responses of dual-mode readout originate from two distinct mechanisms and relatively independent signal transduction, in which there is no interference between two signaling routes. Additionally, compared with the reported single-signal electrochemical assays for BChE, both redox potential signals were detected in the absence of biological interference within a negative potential window. Furthermore, it was discovered that the outcomes of direct dual-mode electrochemical and fluorescence quantifications of the level of BChE in serum were in agreement with those obtained from the use of commercially available assay kits for BChE sensing. This method has the potential to serve as a useful point-of-care tool for the early detection of AD.

Review of Chemical Sensors for Hydrogen Sulfide Detection in Organisms and Living Cells

As the third gasotransmitter, hydrogen sulfide (H₂S) is involved in a variety of physiological and pathological processes wherein abnormal levels of H₂S indicate various diseases. Therefore, an efficient and reliable monitoring of H₂S concentration in organisms and living cells is of great significance. Of diverse detection technologies, electrochemical sensors possess the unique advantages of miniaturization, fast detection, and high sensitivity, while the fluorescent and colorimetric ones exhibit exclusive visualization. All these chemical sensors are expected to be leveraged for H₂S detection in organisms and living cells, thus offering promising options for wearable devices. In this paper, the chemical sensors used to detect H₂S in the last 10 years are reviewed based on the different properties (metal affinity, reducibility, and nucleophilicity) of H₂S, simultaneously summarizing the detection materials, methods, linear range, detection limits, selectivity, etc. Meanwhile, the existing problems of such sensors and possible solutions are put forward. This review indicates that these types of chemical sensors competently serve as specific, accurate, highly selective, and sensitive sensor platforms for H₂S detection in organisms and living cells.

Water-Stable Eu6-Cluster-Based fcu-MOF with Exposed Vinyl Groups for Ratiometric and Fluorescent Visual Sensing of Hydrogen Sulfide

Detection of H₂S in the biological system has attracted enormous attention in recent years. In this work, a new vinyl-functionalized metal-organic framework (MOF), [(Me₂NH₂)₂] [Eu₆(μ₃-OH)₈(BDC-CH═CH₂)₆(H₂O)₆] (Eu-BDC-CH═CH₂, BDC-CH═CH₂ = 2-vinylterephthalic acid), was synthesized under solvothermal conditions. The vinyl groups in the ligands can not only modulate the "antenna effect" of the ligand on Eu³⁺ ions but also serve as an exposed reactive site to allow for the quantitative detection of H₂S by Eu-BDC-CH═CH₂. The ratiometric fluorescent probe has the advantages of water stability, acid-base stability (pH = 2-11), fast response (<2 min), high selectivity, and sensitivity (LOD = 38.4 μM). We also used Eu-BDC-CH═CH₂ to detect and analyze H₂S in tap and lake waters, demonstrating the potential of the probe for biological and environmental applications. In addition, the MOF-based agarose hydrogel film allows for the visual detection of H₂S via a smartphone by identifying the RGB values. The vinyl-functionalized MOF can thus be a powerful sensing platform for H₂S.

Aptamer-Target Recognition-Promoted Ratiometric Electrochemical Strategy for Evaluating the Microcystin-LR Residue in Fish without Interferences

Given the significance of food safety, it is highly urgent to develop a sensitive yet reliable sensor for the practical analysis of algal toxins. As most of the developed sensors are disturbed by interfering substances and the target toxin is detected in a single-signal manner based on the immunoassay technology. Herein, we developed an aptamer-based dual-signal ratiometric electrochemical sensor for the sensitive and accurate analysis of microcystin-LR (MC-LR), using it as a proof-of-concept analyte. Methylene blue-tagged ssDNA (MB-ssDNA) was immobilized at the gold electrode surface accompanied with the absence of ferrocene-tagged ssDNA (Fc-ssDNA), resulting in a high differential pulse voltammetry (DPV) current of MB and a low DPV current of Fc. The recognition of MB-ssDNA by MC-LR stimulated the formation of MC-LR@MB-ssDNA, which induced the removal of MB-ssDNA from the electrode and the exposure of SH-ssDNA, enabling Fc-ssDNA to be captured at the electrode surface via nucleic acid hybridization. In comparison with MC-LR deficiency, the DPV signal of MB dropped along with an improved DPV signal of Fc, contributing to the ratiometric detection of MC-LR, with the limit of detection down to 0.0015 nM. Furthermore, this ratiometric electrochemical sensor was successfully explored to assess the bioaccumulated amount of MC-LR in the liver and meat of fish. The aptamer-based ratiometric strategy to develop an electrochemical MC-LR assay will offer a promising avenue to develop high-performance sensors, and the sensor will find more useful application in MC-LR-related aquatic product safety studies.

Biocompatible Electrochemical Sensor Based on Platinum-Nickel Alloy Nanoparticles for In Situ Monitoring of Hydrogen Sulfide in Breast Cancer Cells

Hydrogen sulfide (H₂S), an endogenous gasotransmitter, is produced in mammalian systems and is closely associated with pathological and physiological functions. Nevertheless, the complete conversion of H₂S is still unpredictable owing to the limited number of sensors for accurate and quantitative detection of H₂S in biological samples. In this study, we constructed a disposable electrochemical sensor based on PtNi alloy nanoparticles (PtNi NPs) for sensitive and specific in situ monitoring of H₂S released by human breast cancer cells. PtNi alloy NPs with an average size of 5.6 nm were prepared by a simple hydrothermal approach. The conversion of different forms of sulfides (e.g., H₂S, HS^-, and S^2-) under various physiological conditions hindered the direct detection of H₂S in live cells. PtNi NPs catalyze the electrochemical oxidation of H₂S in a neutral phosphate buffer (PB, pH 7.0). The PtNi-based sensing platform demonstrated a linear detection range of 0.013-1031 µM and the limit of detection was 0.004 µM (S/N = 3). Moreover, the PtNi sensor exhibited a sensitivity of 0.323 μA μM^-1 cm^-2. In addition, the stability, repeatability, reproducibility, and anti-interference ability of the PtNi sensor exhibited satisfactory results. The PtNi sensor was able to successfully quantify H₂S in pond water, urine, and saliva samples. Finally, the biocompatible PtNi electrode was effectively employed for the real-time quantification of H₂S released from breast cancer cells and mouse fibroblasts.

Progress on the reaction-based methods for detection of endogenous hydrogen sulfide

Hydrogen sulfide (H₂S) is a biologically signaling molecule that mediates a wide range of physiological functions, which is frequently misregulated in numerous pathological processes. As such, measurement of H₂S holds great attention due to its unique physiological and pathophysiological roles. Currently, a variety of methods based on the H₂S-involved reactions have been reported for detection of endogenous H₂S, bearing the advantages of good specificity and high sensitivity. This review describes in detail the types of reactions, their mechanisms, and their applications in biological research, thus hopefully providing some guidelines to the researchers in this field for further investigation.

Ratiometric Electrochemistry: Improving the Robustness, Reproducibility and Reliability of Biosensors

Electrochemical biosensors are an increasingly attractive option for the development of a novel analyte detection method, especially when integration within a point-of-use device is the overall objective. In this context, accuracy and sensitivity are not compromised when working with opaque samples as the electrical readout signal can be directly read by a device without the need for any signal transduction. However, electrochemical detection can be susceptible to substantial signal drift and increased signal error. This is most apparent when analysing complex mixtures and when using small, single-use, screen-printed electrodes. Over recent years, analytical scientists have taken inspiration from self-referencing ratiometric fluorescence methods to counteract these problems and have begun to develop ratiometric electrochemical protocols to improve sensor accuracy and reliability. This review will provide coverage of key developments in ratiometric electrochemical (bio)sensors, highlighting innovative assay design, and the experiments performed that challenge assay robustness and reliability.

Gd doped molybdenum selenide/carbon nanofibers: an excellent electrocatalyst for monitoring endogenous H2S

Design and synthesis of Gd doped molybdenum selenide/carbon nanofibers for monitoring H₂S.

Facile synthesis of ultrahigh fluorescence N,S-self-doped carbon nanodots and their multiple applications for H2S sensing, bioimaging in live cells and zebrafish, and anti-counterfeiting

Green-emissive N,S-self-doped carbon nanodots (N,S-self-CNDs) with an ultrahigh fluorescence (FL) quantum yield (QY) of 60% were synthesized using methyl blue as the only source by a facile hydrothermal approach. The -NH- and -SOx- groups of methyl blue were simultaneously used as nitrogen and sulfur co-dopants to dope into CNDs. The prepared N,S-self-CNDs have an extremely large Stokes shift (∼130 nm) and excitation-independent fluorescence, and are demonstrated to have multiple applications for H2S sensing, bioimaging and anti-counterfeiting. Taking advantage of their excellent optical properties, N,S-self-CNDs could act as a label-free nanoprobe for the detection of H2S. The FL of N,S-self-CNDs could be significantly quenched by H2S because of dynamic quenching, along with excellent selectivity toward H2S from 0.5-15 μM with a detection limit of 46.8 nM. They were successfully employed for the analysis of H2S content in actual samples. Additionally, the nanoprobe was extended to bioimaging in both living PC12 cells and zebrafish, and monitoring H2S in live cells. Furthermore, N,S-self-CNDs have been used to prepare highly fluorescent polymer films by incorporating N,S-self-CNDs in polyvinyl alcohol (PVA). The as-prepared N,S-self-CNDs/PVA films show a prominent dual-mode FL property, implying that they are potential nanomaterials in the anti-counterfeiting field.

Dual mode electrochemical-photoelectrochemical sensing platform for hydrogen sulfide detection based on the inhibition effect of titanium dioxide/bismuth tungstate/silver heterojunction

A novel dual mode sensing platform is constructed for highly selective detection of H₂S, attributing to the efficient electrochemical (EC) and photoelectrochemical (PEC) signal responses of the TiO₂/Bi₂WO₆/Ag heterojunction. On the one hand, TiO₂/Bi₂WO₆/Ag heterojunction with excellent catalytic performance for the reduction of H₂O₂ could be employed act as a probe, providing a remarkable EC response through an amperometric i-t method. On the other hand, this hybrid provides a photoelectric beacon with a favorable energy-band configuration. More interestingly, the EC and PEC responses of the functionalized electrodes are proportionately decreased in response to the generation of Bi₂S₃ and Ag₂S nanoparticles upon exposure to sulfide ions. The decreased EC and PEC signals could be ascribed to the poor catalytic properties and the recombination of photoexcited electron - hole pairs of the Bi₂S₃ and Ag₂S. Under the optimal conditions, the dual mode sensor exhibits a wide linear response in the range from 0.5 μM to 300 μM with a detection limit of 0.08 μM for the detection of H₂S. Enabled by this unique sensitization mechanism, the proposed sensing platform displays an excellent analytical performance with good selectivity, reproducibility and stability, which providing an alternative pathway of H₂S detecting in practical application.

Ratiometric Strategy for Electrochemical Sensing of Carbaryl Residue in Water and Vegetable Samples

Accurate analysis of pesticide residue in real samples is essential for food safety and environmental protection. However, a traditional electrochemical sensor based on single-signal output is easily affected by background noise, environmental conditions, electrode diversity, and a complex matrix of samples, leading to extremely low accuracy. Hence, in this paper, a ratiometric strategy based on dual-signal output was adopted to build inner correction for sensing of widely-used carbaryl (CBL) for the first time. By comparison, Nile blue A (NB) was selected as reference probe, due to its well-defined peak, few effects on the target peak of CBL, and excellent stability. The effects of a derivatization method, technique mode, and pH were also investigated. Then the performance of the proposed ratiometric sensor was assessed in terms of three aspects including the elimination of system noise, electrode deviation and matrix effect. Compared with traditional single-signal sensor, the ratiometric sensor showed a much better linear correlation coefficient (r > 0.99), reproducibility (RSD < 10%), and limit of detection (LOD = 1.0 μM). The results indicated the introduction of proper reference probe could ensure the interdependence of target and reference signal on the same sensing environment, thus inner correction was fulfilled, which provided a promising tool for accurate analysis.

An Ultrasensitive Non-Enzymatic Sensor for Quantitation of Anti-Cancer Substance Chicoric Acid Based on Bimetallic Nanoalloy with Polyetherimide-Capped Reduced Graphene Oxide

Exploiting effective therapies to fight tumor growth is an important part of modern cancer research. The anti-cancer activities of many plant-derived substances are well known, in part because the substances are often extensively distributed. Chicoric acid, a phenolic compound widely distributed in many plants, has drawn widespread attention in recent years because of its extraordinary anti-cancer activities. However, traditional methods for quantifying chicoric acid are inefficient and time-consuming. In this study, an ultrasensitive non-enzymatic sensor for the determination of chicoric acid was developed based on the use of an Au@Pt-polyetherimide-reduced graphene oxide (PEI-RGO) nanohybrid-modified glassy carbon electrode. Owing to the considerable conductivity of PEI-functionalized RGO and the efficient electrocatalytic activity of Au@Pt nanoalloys, the designed sensor exhibited a high capacity for chicoric acid measurement, with a low detection limit of 4.8 nM (signal-to-noise ratio of 3) and a broad linear range of four orders of magnitude. With the advantages provided by the synergistic effects of Au@Pt nanocomposites and PEI-RGO, the developed sensor also revealed exceptional electrochemical characteristics, including superior sensitivity, fast response, acceptable long-term stability, and favorable selectivity. This work provides a powerful new platform for the highly accurate measurement of chicoric acid quantities, facilitating further research into its potential as a cancer treatment.

Electrochemical substrate for active profiling of cellular surface leucine aminopeptidase activity and drug resistance in cancer cells

Leucine aminopeptidase (LAP) is an essential proteolytic enzyme and potential biomarker for liver malignancy. Overexpression of LAP is directly linked with some fatal physiological and pathological disorders. In this regard, we have designed an activity based electrochemical substrate leucine-benzyl ferrocene carbamate (Leu-FC) for selective profiling of LAP activity in live cells. In practice, LAP instantaneously hydrolyze the Leu residue of the substrate Leu-FC to eliminate the unmasked electrochemical reporter amino ferrocene via predefined self-immolative cascade. The electrochemical signal is distinctly specific for LAP and free of other electroactive biological interference. The substrate Leu-FC empowered sensor displayed broad dynamic range with admirable detection limits. On top of this, the probe Leu-FC was employed in real-time active profiling of cellular LAP activity in HepG2 cells and effect of LAP inhibitor. In extent, the substrate Leu-FC can effectively monitor cisplatin induced overexpression of LAP activity in HepG2 cells in presence and absence of bestatin. The sensor showcased an excellent reliability towards monitoring cellular LAP activity in HepG2 cells. Unlike the traditional antibody-based immunoassays, our approach is capable of monitoring in-situ activity of LAP in live cells.

Electronically-tuned triarylmethine scaffolds for fast and continuous monitoring of H2S levels in biological samples

A sensor for the detection and quantification of H2S in biological samples should ideally meet a set of criteria such as fast detection, high sensitivity in the desired concentration range, high selectivity, non-interference from biomolecules like proteins, ease of synthesis, long-term stability and water solubility. Although a number of H2S probes are known, none of them possess all the above attributes that are relevant for practical applications. As part of a program to develop reliable chemical probes for continuous monitoring of this gasotransmitter in the blood plasma of sepsis-prone individuals in post-operative wards, we have looked at the possibility of improving the reactivity and selectivity profile of triarylmethine dyes towards different nucleophiles. After achieving high sensitivity through electronic control, the interference from sulfite, thiosulfate and metabisulfite was addressed by introducing a metal salt-mediated desulfuration step that results in dye regeneration selectively from its H2S adduct. Typically, if the analyte contains only H2S, the loss of absorbance in the first step gets completely reinstated after the second step; absorbance changes in both steps vary linearly with sulfide concentration and either of these two steps can be used for the quantification of H2S with the help of standard plots. In the presence of interfering ions, the first step will show decolourization due to the presence of all of them whereas only the H2S-adduct will undergo desulfuration in the second step which can be used for quantification. The decolourization step is instantaneous while the desulfuration requires only about 50 s, making the entire protocol complete in less than a minute. The methodology optimized here also meets the requirements mentioned above for real-life applications.

Latent Redox Reporter of 4-Methoxyphenol as Electrochemical Signal Proxy for Real-Time Profiling of Endogenous H2O2 in Living Cells

Hydrogen peroxide (H₂O₂) plays a persuasive role in the human cell physiology. Developing an efficient assay platform and a highly sensitive tracking and quantification of H₂O₂ in a physiological system is crucial to understand the neoplastic changes and/or redox homeostasis of cells. In this study, a novel turn-on latent electrochemical redox probe coupled with electrocatalytic signal amplification strategy is proposed. A custom-made readily available turn-on latent electrochemical probe 4-methoxyphenylboronic acid pinacol ester (4-MPBP) have been designed for the selective detection of endogenous H₂O₂ in live cells. The electrochemical probe composed of a latent electrochemical reporter (4-methoxy phenol, 4-MP) bearing a recognition unit (boronic acid pinacol ester) for H₂O₂ sensing. The selective analyte-triggered chemical transformation releases free electrochemical reporter 4-MP. The amount of H₂O₂ was evaluated electrochemically at glassy carbon electrode (GCE) with a broad detection range of 0.5 μM-1 mM. An amplified signal response of released 4-MP to build a highly sensitive assay tool has been achieved via replacing the GCE transducer electrode with polydopamine@carbonnanotube-molebtinumdisulfie hybrid modified GCE as it delivered an exceptional dynamic detection range of 0.01-100 μM. The innovative blend of electrochemical molecular probe strategy, with electrocatalytic signal amplification technique has delivered outstanding assay performance at trace level sensing of H₂O₂. Next, we set up a platform for real-time in vivo monitoring of the endogenously produced H₂O₂ in Caco-2 and MCF-7 cells through spermine-polyamine analogue and phorbol 12-myristate 13-acetate induction in SSAT/PAO gene and protein kinase C, respectively. As expected, the 4-MPBP latent probe coupled with electrocatalytic signal amplification strategy delivered outstanding performance for in situ H₂O₂ release and tracking over time.

Real Time Microwave Biochemical Sensor Based on Circular SIW Approach for Aqueous Dielectric Detection

In this study, a critical evaluation of analyte dielectric properties in a microvolume was undertaken, using a microwave biochemical sensor based on a circular substrate integrated waveguide (CSIW) topology. These dielectric properties were numerically investigated based on the resonant perturbation method, as this method provides the best sensing performance as a real-time biochemical detector. To validate these findings, shifts of the resonant frequency in the presence of aqueous solvents were compared with an ideal permittivity. The sensor prototype required a 2.5 µL volume of the liquid sample each time, which still offered an overall accuracy of better than 99.06%, with an average error measurement of ±0.44%, compared with the commercial and ideal permittivity values. The unloaded Q_u factor of the circular substrate-integrated waveguide (CSIW) sensor achieved more than 400 to ensure a precise measurement. At 4.4 GHz, a good agreement was observed between simulated and measured results within a broad frequency range, from 1 to 6 GHz. The proposed sensor, therefore, offers high sensitivity detection, a simple structural design, a fast-sensing response, and cost-effectiveness. The proposed sensor in this study will facilitate real improvements in any material characterization applications such as pharmaceutical, bio-sensing, and food processing applications.

A novel lysosome-targeted fluorogenic probe based on 5-triazole-quinoline for the rapid detection of hydrogen sulfide in living cells

A fluorogenic probe based on the novel fluorophore 5-triazole-quinoline was developed for the detection of hydrogen sulfide, an endogenous signaling molecule associated with the development of various diseases. The lysosome-targeted probe Lyso-HS was synthesized via C-H direct azidation from 8-aminoquinoline; it was able to detect H₂S in 1 min and exhibited excellent turn-on ability with 95-fold fluorescence enhancement based on a new fluorochrome. The high quenching efficiency was further verified using time-dependent density functional theory (TDDFT). The probe also exhibited high selectivity and a low detection limit (as low as 214.5 nM), which has practical applications for disease detection and monitoring.

A Facile Electrochemical Sensor Labeled by Ferrocenoyl Cysteine Conjugate for the Detection of Nitrite in Pickle Juice

Simple and facile electrochemical sensors for nitrite detection were fabricated by directly depositing ferrocenoyl cysteine conjugates Fc[CO-Cys(Trt)-OMe]₂ [Fc(Cys)₂] or Fc[CO-Glu-Cys-Gly-OH] [Fc-ECG] on screen-printed electrodes (SPEs). The modified carbon electrodes were characterized by scanning electron microscopy (SEM), cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Results indicated that Fc-ECG/SPE sensor showed enhanced current response and a lower overpotential than Fc(Cys)₂/SPE sensor for nitrite detection. Optimal operating conditions were estimated for nitrite detection by DPV. The concentration of nitrite showed a good linear relationship with the current response in the range of 1.0–50 μmol·L⁻¹ and with 0.3 μmol·L⁻¹ as the concentration for limit of detection. There were no interferences from most common ions. The development of this electrochemical sensor was used for nitrite detection in pickled juice with a R.S.D. lower than 2.1% and average recovery lower than 101.5%, which indicated that disposable electrochemical sensor system can be applied for rapid and precise nitrite detection in foods.

Recent advances of ratiometric electrochemiluminescence biosensors

Ratiometric electrochemiluminescence (ECL) assays have been widely applied in biosensing because of eliminated outside interferences and improved reliability in detection.

Electrochemical Molecular Switch for the Selective Profiling of Cysteine in Live Cells and Whole Blood and for the Quantification of Aminoacylase-1

A first-of-a-kind latent electrochemical redox probe, ferrocene carbamate phenyl acrylate (FCPA), was developed for the selective detection of cysteine (Cys) and aminoacylase (ACY-1). The electrochemical signal generated by this probe was shown to be highly specific to Cys and insensitive to other amino acids and biological redox reactants. The FCPA-incorporated electrochemical sensor exhibited a broad dynamic range of 0.25-100 μM toward Cys. This probe also proficiently monitored the ACY-1-catalyzed biochemical transformation of N-acetylcysteine (NAC) into Cys, and this proficiency was used to develop an electrochemical assay for quantifying active ACY-1, which it did so in a dynamic range of 10-200 pM (0.1-2 mU/cm³) with a detection limit of 1 pM (0.01 mU/cm³). Furthermore, the probe was utilized in real-time tracking and quantification of cellular Cys production, specifically in Escherichia coli W3110, along with a whole blood assay to determine levels of Cys and spiked ACY-1 in blood with a reliable analytical performance.

In Situ Immobilized Sesamol-Quinone/Carbon Nanoblack-Based Electrochemical Redox Platform for Efficient Bioelectrocatalytic and Immunosensor Applications

Most of the common redox mediators such as organic dyes and cyanide ligand-associated metal complex systems that have been used for various electrochemical applications are hazardous nature. Sesamol, a vital nutrient that exists in natural products like sesame seeds and oil, shows several therapeutic benefits including anticancer, antidiabetic, cardiovascular protective properties, etc. Herein, we introduce a new electrochemical redox platform based on a sesamol derivative, sesamol-quinone (Ses-Qn; oxidized sesamol), prepared by the in situ electrochemical oxidation method on a carbon nanoblack chemically modified glassy carbon electrode surface (GCE/CB@Ses-Qn) in pH 7 phosphate buffer solution, for nontoxic and sustainable electrochemical, electroanalytical, and bioelectroanalytical applications. The new Ses-Qn-modified electrode showed a well-defined redox peak at E ^o = 0.1 V vs Ag/AgCl without any surface-fouling behavior. Following three representative applications were demonstrated with this new redox system: (i) simple and quick estimation of sesamol content in the natural herbal products by electrochemical oxidation on GCE/CB followed by analyzing the oxidation current signal. (ii) Utilization of the GCE/CB@Ses-Qn as a transducer, bioelectrocatalytic reduction, and sensing of H₂O₂ after absorbing the horseradish peroxidase (HRP)-based enzymatic system on the underlying surface. The biosensor showed a highly selective H₂O₂ signal with current sensitivity and detection limit values 0.1303 μA μM^-1 and 990 nM, respectively, with tolerable interference from the common biochemicals like dissolved oxygen, cysteine, ascorbic acid, glucose, xanthine, hypoxanthine, uric acid, and hydrazine. (iii) Electrochemical immunosensing of white spot syndrome virus by sequentially modifying primary antibody, antigen, secondary antibody (HRP-linked), and bovine serum albumin on the redox electrode, followed by selective bioelectrochemical detection of H₂O₂.

A ratiometric nanoprobe based on silver nanoclusters and carbon dots for the fluorescent detection of biothiols

Ratiometric fluorescent probes could eliminate the influence from experimental factors and improve the detection accuracy. In this article, a ratiometric nanoprobe was constructed based on silver nanoclusters (AgNCs) with nitrogen-doped carbon dots (NCDs) and used for the detection of biothiols. The fluorescence peak of AgNCs was observed at 650nm with excitation wavelength at 370nm. In order to construct the ratiometric fluorescent probe, NCDs with the excitation and emission wavelengths at 370nm and 450nm were selected. After adding AgNCs, the fluorescence of NCDs was quenched. The mechanism of the fluorescence quenching was studied by fluorescence, UV-Vis absorption and the fluorescence lifetime spectra. The results indicated that the quenching could be ascribed to the inner filter effect (IFE). With the addition of biothiols, the fluorescence of AgNCs at 650nm decreased due to the breakdown of AgNCs, and the fluorescence of NCDs at 450nm recovered accordingly. Thus, the relationship between the ratio of the fluorescence intensities (I₄₅₀/I₆₅₀) and biothiol concentration was used to establish the determination method for biothiols. Cysteine (Cys) was taken as the model of biothiols, and the working curve for Cys was I₄₅₀/I₆₅₀=0.60C_Cys-1.86 (C_Cys: μmol/L) with the detection limit of 0.14μmol/L (S/N=3). Then, the method was used for the detection of Cys in human urine and serum samples with satisfactory accuracy and recovery ratios. Furthermore, the probe could be applied for the visual semi-quantitative determination of Cys by naked eyes.

Dynamic mapping of spontaneously produced H2S in the entire cell space and in live animals using a rationally designed molecular switch

A rationally designed molecular switch created to detect and dynamically map spontaneous production of H₂S in whole cells and the organs of live zebrafish.