A self-powered biosensing device with an integrated hybrid biofuel cell for intermittent monitoring of analytes

Small but Mighty: A Microfluidic Biofuel Cell-Based Biosensor for the Determination of Ethanol

We developed a membraneless-microfluidic biofuel cell (MBFC) for the quantification of ethanol. The system employs anolyte and catholyte solutions, each containing a biocatalyst and redox mediator. The laminar flow conditions in the microfluidic chip minimize the mixing between anolyte and catholyte and obviate the need for a membrane to separate them. When ethanol is added to the anolyte, alcohol dehydrogenase (ADH) catalyzes its oxidation to acetaldehyde, releasing electrons to the anode. On the cathode, electrons are transferred to horseradish peroxidase (HRP), which reduces hydrogen peroxide in the catholyte to water. We optimized key design factors and operating conditions. We also studied the incorporation of glycerol as a viscosity modifier, which improved the power and current density supplied by the MBFC, with a maximum power output of 307 µW cm-2 and an open circuit voltage of 0.733 V. The proposed ethanol/hydrogen peroxide MBFC was successfully applied as a biofuel cell-based sensor for the quantification of ethanol in a commercial liquor.

Biofuel cell-based self-powered immunosensor for detection of 17β-estradiol by integrating the target-induced biofuel release and biogate immunoassay

A novel biofuel cell (BFC)-based self-powered electrochemical immunosensing platform was developed by integrating the target-induced biofuel release and biogate immunoassay for ultrasensitive 17β-estradiol (E2) detection. The carbon nanocages/gold nanoparticle composite was employed in the BFCs device as the electrode material, through which bilirubin oxidase and glucose oxidase were wired to form the biocathode and bioanode, respectively. Positively charged mesoporous silica nanoparticles (PMSN) were encapsulated with glucose molecules as biofuel and subsequently coated by the negatively charged AuNPs-labelled anti-E2 antibody (AuNPs-Ab) serving as a biogate. The biogate could be opened efficiently and the trapped glucose released once the target E2 was recognized and captured by AuNPs-Ab due to the decreased adhesion between the antigen-antibody complex and PMSN. Then, glucose oxidase oxidized the glucose to produce a large number of electrons, resulting in significantly increased open-circuit voltage (EOCV). Promisingly, the proposed BFC-based self-powered immunosensor demonstrated exceptional sensitivity for the detection of E2 in the concentration range from 1.0 pg mL-1 to 10.0 ng mL -1, with a detection limit of 0.32 pg mL-1 (S/N = 3). Furthermore, the prepared BFC-based self-powered homogeneous immunosensor showed significant potential for implementation as a viable prototype for a mobile and an on-site bioassay system in food and environmental safety applications.

A Disposable Sensor Chip Using a Paste Electrode with Surface-Imprinted Graphite Particles for Rapid and Reagentless Monitoring of Theophylline

This work focuses on a carbon-based imprinted polymer composite, employed as a molecular recognition and sensing interface in fabricating a disposable electrochemical sensor. The carbon-paste electrode was made of a molecularly imprinted polymer comprising a copolymer of methacrylic acid as the functional monomer and blended crosslinking monomers of N,N'-methylenebisacrylamide, and ethylene glycol dimethacrylate, with theophylline as the template. The analytical properties of the proposed theophylline sensor were investigated, and the findings revealed an increase in differential pulse voltammetric current compared to the non-imprinted electrode. Under optimized conditions, the sensor has shown high sensitivity, high selectivity, lower detection limit (2.5 µg/mL), and satisfactory long-term stability. Further, the sensor was tested in whole bovine blood and validated without any matrix effect and cross-reactivity. Additionally, chronoamperometry of the sensor chip supported a rapid determination of THO with a short response time of 3 s. This carbon-paste electrode is highly specific for theophylline and may be applied as a drug sensor for clinical use.

Biofuel Cell-Driven Robust Electrochemiluminescence Biosensing Platform

Electrochemiluminescence (ECL) is one powerful tool in the sensing field, in which the electrochemical workstation is necessary to achieve the electrical/optical signal conversion in the presence of luminescent agents. By contrast, biofuel cells (BFCs) can also provide electricity from renewable biofuels under moderate conditions. More importantly, BFCs with the features of adjustable voltage output and excellent compatibility would well meet the requirement of working voltages for different ECL devices. However, to the best of our knowledge, the BFC-driven luminous system has not been reported. In this work, we constructed, for the first time, a BFC-driven ECL system with fast and stable signal outputs. To demonstrate the proof-of-concept of the BFC-ECL system, the sensitive and selective detection of histidine was achieved, exhibiting great potential among point-of-care diagnoses in remote regions. Overall, this work not only paves a new way for the conversion of chemical energy, electrical energy, and luminous system but also explores the new application of BFC.

Advanced materials-integrated electrochemical sensors as promising medical diagnostics tools: A review

Electrochemical sensors have increasingly been linked with terms as modern biomedically effective highly selective and sensitive devices, wearable and wireless technology, portable electronics, smart textiles, energy storage, communication and user-friendly operating systems. The work brings the overview of the current advanced materials and their application strategies for improving performance, miniaturization and portability of sensing devices. It provides the extensive information on recently developed (bio)sensing platforms based on voltammetric, amperometric, potentiometric and impedimetric detection modes including portable, non-invasive, wireless, and self-driven miniaturized devices for monitoring human and animal health. Diagnostics of selected free radical precursors, low molecular biomarkers, nucleic acids and protein-based biomarkers, bacteria and viruses of today's interest is demonstrated.

Preparation of PbS NPs/RGO/NiO nanosheet arrays heterostructure: Function-switchable self-powered photoelectrochemical biosensor for H2O2 and glucose monitoring

On the basis of synthesized PbS nanoparticles (PbS NPs)/reduced graphene oxide (RGO)/NiO nanosheet arrays (NiO NSAs) heterostructure, we constructed a function-switchable self-powered PEC sensing platform for the analysis of H2O2 and glucose. Ordered NiO NSAs have high electron mobility, modifying RGO onto the surfaces of NiO NSAs can connect the NiO NSAs with the PbS NPs and promoted the electron transfer rate between them, as well as enhance their photocurrent response. The PbS NPs/RGO/NiO NSAs heterostructure own excellent catalase-like activity can achieve H2O2 detection, only with one more step, after introducing glucose oxidase (GOD) onto the surface of PbS NPs/RGO/NiO NSAs heterostructure, we realized the detection conversion between H2O2 and glucose. Under optimal conditions, the proposed biosensor exhibited superior analytical performance toward H2O2 and glucose, a limit of detection (LOD) of 0.018 mM (S/N = 3) and 5.3 × 10-8 M (S/N = 3) were obtained, respectively. Moreover, good accuracy was obtained in the real samples analysis of H2O2 disinfectant and human serum samples.

Optimization of rGO-PEI/Naph-SH/AgNWs/Frt/GOx nanocomposite anode for biofuel cell applications

The present study reports a new nanocomposite design using surface modified silver nanowires decorated on the surface of polyethyleneimine (PEI), a cationic polymer acting as glue for anchoring nanowires and reduced graphene oxide (rGO). The synthesized nanocomposite was employed as a promising electrode material for immobilization of biomolecules and effective transportation of electron, in enzymatic biofuel cell (EBFCs) application. The synthesized nanocomposite was confirmed by analytical techniques, for instance, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM). The electrochemical behaviour of the nanobioelectrocatalysts rGO-PEI/Frt/GOx, rGO-PEI/AgNWs/Frt/GOx, and rGO-PEI/Naph-SH/AgNWs/Frt/GOx was determined by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and linear sweep voltammetry (LSV). The maximum current density obtained by the modified bioanode was found to be 19.9 mA cm⁻² at the limiting glucose concentration of 50 mM in PBS (pH 7.0) as supporting electrolyte at a scan rate of 100 mVs⁻¹.

Self-Powered Portable Electronic Reader for Point-of-Care Amperometric Measurements

In this work, we present a self-powered electronic reader (e-reader) for point-of-care diagnostics based on the use of a fuel cell (FC) which works as a power source and as a sensor. The self-powered e-reader extracts the energy from the FC to supply the electronic components concomitantly, while performing the detection of the fuel concentration. The designed electronics rely on straightforward standards for low power consumption, resulting in a robust and low power device without needing an external power source. Besides, the custom electronic instrumentation platform can process and display fuel concentration without requiring any type of laboratory equipment. In this study, we present the electronics system in detail and describe all modules that make up the system. Furthermore, we validate the device’s operation with different emulated FCs and sensors presented in the literature. The e-reader can be adjusted to numerous current ranges up to 3 mA, with a 13 nA resolution and an uncertainty of 1.8%. Besides, it only consumes 900 µW in the low power mode of operation, and it can operate with a minimum voltage of 330 mV. This concept can be extended to a wide range of fields, from biomedical to environmental applications.

Tackling the Challenges of Enzymatic (Bio)Fuel Cells

The ever-increasing demands for clean and sustainable energy sources combined with rapid advances in biointegrated portable or implantable electronic devices have stimulated intensive research activities in enzymatic (bio)fuel cells (EFCs). The use of renewable biocatalysts, the utilization of abundant green, safe, and high energy density fuels, together with the capability of working at modest and biocompatible conditions make EFCs promising as next generation alternative power sources. However, the main challenges (low energy density, relatively low power density, poor operational stability, and limited voltage output) hinder future applications of EFCs. This review aims at exploring the underlying mechanism of EFCs and providing possible practical strategies, methodologies and insights to tackle these issues. First, this review summarizes approaches in achieving high energy densities in EFCs, particularly, employing enzyme cascades for the deep/complete oxidation of fuels. Second, strategies for increasing power densities in EFCs, including increasing enzyme activities, facilitating electron transfers, employing nanomaterials, and designing more efficient enzyme-electrode interfaces, are described. The potential of EFCs/(super)capacitor combination is discussed. Third, the review evaluates a range of strategies for improving the stability of EFCs, including the use of different enzyme immobilization approaches, tuning enzyme properties, designing protective matrixes, and using microbial surface displaying enzymes. Fourth, approaches for the improvement of the cell voltage of EFCs are highlighted. Finally, future developments and a prospective on EFCs are envisioned.

Light-driven self-powered biosensor for ultrasensitive organophosphate pesticide detection via integration of the conjugated polymer-sensitized CdS and enzyme inhibition strategy

A new light-driven self-powered biosensor based on a photoelectrochemical enzymatic fuel cell was proposed for the ultrasensitive detection of organophosphate pesticides.

Enzymatic biofuel cell-based self-powered biosensing of protein kinase activity and inhibition via thiophosphorylation-mediated interface engineering

We developed a facile and ultrasensitive EBFC-based self-powered biosensor of protein kinase A activity and inhibition via thiophosphorylation-mediated interface engineering.