An enzymatic calculation system based on electrochemiluminescence and fluorescence of luminol and cyclic voltammetry of ferrocene methanol

An elaborate biomolecular keypad lock based on electrochromism of viologen derivatives and bioelectrocatalytic reduction of CO2 at supramolecular hydrogel film electrodes

Herein, the short peptide N-fluorenemethoxycarbonyl diphenylalanine (Fmoc-FF) was used to immobilize both diallyl viologen (DAV) and the enzyme formate dehydrogenase (FDH) to form Fmoc-FF/DAV/FDH supramolecular hydrogel films on an electrode surface by a simple solvent-controlled self-assembly method. The DAV component in the films exhibited multiple properties, such as electrochromism and electrofluorochromism, and acted as an electrochemical mediator. A high efficiency of bioelectrocatalytic reduction of CO2 to formate (HCOO-) was obtained by the natural FDH enzyme and the artificial coenzyme factor DAV both immobilized in the same films. The supramolecular hydrogel films with CO2, voltage and light as stimulating factors and current, fluorescence and UV-vis extinction as responsive signals, were further applied for the construction of complex biomolecular logic systems and information encryption. A 3-input/7-output biomolecular logic gate and several logic devices, including an encoder/decoder, a parity checker, and a keypad lock, were constructed. Especially, the biomolecular keypad lock with 3 types of signals as outputs significantly enhanced the security level of information encryption. In this work, a supramolecular self-assembly interface was simply fabricated with complex biomolecular computational functions using immobilized molecules as the computational core, greatly broadening the application range of supramolecular hydrogel films and providing an idea for new designs of bioinformation encryption through the use of a simple film system.

Engineering Molecular Emission Centers of Carbon Dots to Boost the Electrochemiluminescence for the Detection of Cancer Cells

Despite the fact that electrochemiluminescent (ECL) performance of carbon dots (CDs) could be improved by modulating their surface defects, they are still restricted by inferior controllability and poor reproducibility. In this work, we disclosed a new approach for synthesizing luminescent groups rich in CDs (Lu-CDs) by engineering the luminol as molecular emission centers into the CDs, which exhibited an 80-fold stronger ECL intensity at an ECL onset potential of 0.6 V than the CDs without pre-implanted luminol. Different from the significant deviation between the ECL and fluorescence emission of other surface state-dominated CDs, the ECL emission of Lu-CDs was nearly consistent with its fluorescence emission at 465 nm, which was defined as the molecular emission dominated-ECL CDs herein. To prove this principle, the Lu-CDs were employed to construct an ECL biosensor for MCF-7 cell analysis based on the cell direct recognition and amplification strategy, which made the MCF-7 cells as nanomachines via specific binding with aptamer signal probes on the DNA triangular scaffold. The proposed biosensor displayed a wide detection range from 101 to 104 cell mL-1 and a low detection limit of 8.91 cells mL-1. Overall, this work not only presents a new strategy for preparing CDs with high controllability and excellent reproducibility but also provides a platform for tumor cell sensing.

Electrochemiluminescent biosensor for ultrasensitive detection of lymphoma at the early stage using CD20 markers as B cell-specific antigens

Herein, by taking advantage of the special binding of an aptamer to the membrane surface of a B cell and accumulation of the positive charges of a nanocomposite, including luminol-chitosan-platinum nanoparticles (L-Cs-Pt NPs), on the negatively charge of the aptamer phosphate backbone, a sensitive, simple, selective and rapid strategy for the detection of lymphoma cells by a new label-free electrogenerated chemiluminescence (ECL) aptasensor has been introduced. With increasing concentrations of B lymphoma cells, the nanocomposite detaches from the aptamer, leading to a decrease in the ECL of a luminol and H₂O₂ system. With high loading of luminol and Pt NPs on a chitosan, together with the electrocatalytic effect of Pt NPs, enhanced sensitive detection of cancer cells with a limit of detection of 31 cells/mL was achieved. Step-by-step modification and biosensor response to cancer cells was monitored by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and ECL. The aptasensor exhibited excellent specificity for lymphoma cells vs breast cancer (MCF-7) and human embryonic kidney (HEK293) cell lines as potential interferents. Finally, the performance of the aptasensor in blood samples was assessed against a commercial flow cytometric method. Satisfactory results confirmed the applicability of the proposed biosensing platform.

A versatile molecular logic system based on Eu(III) coordination polymer film electrodes combined with multiple properties of NADH

Herein, a new type of lanthanide coordination polymer film made up of europium (Eu(iii)) and poly(N-methacryloylglycine) (Eu(iii)-PMAG) was prepared on an ITO electrode surface driven by the coordination between N-methacryloylglycine (MAG) and Eu(iii) through a single-step polymerization process. The fluorescence signal of Eu(iii)-PMAG films at 617 nm originating from Eu(iii) could be well retained in the buffer solution but was regulated by the concentration of Cu(ii) and the complexing agent EDTA. The switching of fluorescence by Cu(ii) was attributed to the inhibition of the "antenna effect" between Eu(iii) and the MAG ligand in the films. The coexistence of reduced β-nicotinamide adenine dinucleotide (NADH) in the solution can apparently quench the fluorescence of Eu(iii)-PMAG films through the internal filtration effect of UV absorbance overlapping the excitation wavelength, but itself exhibiting a fluorescence emission at 468 nm. In addition, the electrocatalytic oxidation of NADH with the help of the ferrocenedicarboxylic acid (FcDA) probe demonstrated a cyclic voltammetry (CV) signal at 0.45 V (vs. SCE). Based on various reversible stimulus-responsive behaviours, a 4-input/10-output logic network was built using Cu(ii), EDTA, NADH and FcDA as inputs and the signals of fluorescence from Eu(iii)-PMAG (617 nm) and NADH (468 nm), the CV response from FcDA and the UV-vis absorbance from the Cu(ii)-EDTA complex as outputs. Meanwhile, 6 different functional logic devices were constructed based on the same versatile platform, including a 2-to-1 encoder, a 1-to-2 decoder, a 1-to-2 demultiplexer, a parity checker, a transfer gate and a reprogrammable 3-input/2-output keypad lock. Combined with the new type of lanthanide coordination polymer film, NADH played central roles in designing sophisticated computing systems with its fluorescence, UV and electrocatalytic properties. This work might provide a novel avenue to develop intelligent multi-analyte sensing and information processing at the molecular level based on one single platform.

MnOx MFs as a coreaction accelerator for the construction of a novel ternary electrochemiluminescence system: ultrasensitive detection of microRNA

By using multivalent manganese oxides microflowers (MnOx MFs) as prominent a coreaction accelerator in luminol/dissolved oxygen system, and by combining these with DNA nanostructures for efficient immobilization of the electrochemiluminescence (ECL) quencher doxorubicin-ferrocenecarboxylic acid (Dox-FcCOOH), an ultrasensitive biosensing platform was constructed to conduct a microRNA assay in tumour cells.

A biocomputing platform with electrochemical and fluorescent signal outputs based on multi-sensitive copolymer film electrodes with entrapped Au nanoclusters and tetraphenylethene and electrocatalysis of NADH

In this work, poly(N,N'-dimethylaminoethylmethacrylate-co-N-isopropylacrylamide) copolymer films were polymerized on the surface of Au electrodes with a facile one-step method, and Au nanoclusters (AuNCs) and tetraphenylethene (TPE) were synchronously embedded in the films, designated as P(DMA-co-NIPA)/AuNCs/TPE. Ferrocene dicarboxylic acid (FDA), an electroactive probe in solution displayed inverse pH- and SO42--sensitive on-off cyclic voltammetric (CV) behaviors at the film electrodes. The electrocatalytic oxidation of nicotinamide adenine dinucleotide (NADH) mediated by FDA in solution could substantially amplify the CV response difference between the on and off states. Moreover, the two fluorescence emission (FL) signals from the TPE constituent at 450 nm and AuNCs component at 660 nm in the films also demonstrated SO42-- and pH-sensitive behaviors. Based on the aforementioned results, a 4-input/9-output biomolecular logic circuit was constructed with pH, Na2SO4, FDA and NADH as the inputs, and the CV signals and the FL responses at 450 and 660 nm at different levels as the outputs. Additionally, some functional non-Boolean devices were elaborately designed on an identical platform, including a 1-to-2 decoder, a 2-to-1 encoder, a 1-to-2 demultiplexer and different types of keypad locks. This work combines copolymer films, bioelectrocatalysis, and fluorescence together so that more complicated biocomputing systems could be established. This work may pave a new way to develop advanced and sophisticated biocomputing logic circuits and functional devices in the future.

An enzyme-free electrochemiluminescence biosensor for ultrasensitive assay of Group B Streptococci based on self-enhanced luminol complex functionalized CuMn-CeO2 nanospheres

Herein, a novel and pragmatic electrochemiluminescence (ECL) biosensing method was developed for ultrasensitive and specific detection of Group B Streptococci (GBS) by combining self-enhanced luminol complex functionalized CuMn-CeO₂ (CuMn-CeO₂-PEI-luminol) with MNAzyme-mediated target-recycling amplification. First, the efficient self-enhanced PEI-luminol luminophore was prepared by combining PEI co-reactant with luminol in one molecular, which shortened electron transfer distance and enhanced ECL signal. And CuMn-CeO₂ was applied to load a large number of PEI-luminol and strengthen luminous efficiency of luminol by the high catalytic activity toward H₂O₂ oxidation. Then, target-driven MNAzyme system was used to realize the circulation of GBS nucleic acid sequence, producing plentiful triggers to initiate the hybridization reaction on the surface of electrode. The developed enzyme-free ECL biosensor showed ultra-sensitivity for target DNA detection with detection limits of 68 aM (synthetic DNA) and 5 × 10² CFU mL^-1 (genomic DNA extracted from GBS strain). More importantly, this biosensor was successfully applied for detection of genomic DNA of GBS extracted from clinical vaginal/anal swabs as low as 320 copies. Thus, this proposed strategy might be an pragmatic ECL platform for ultrasensitive and specific detection of GBS in clinical vaginal/anal swabs.

Construction of Multiple Switchable Sensors and Logic Gates Based on Carboxylated Multi-Walled Carbon Nanotubes/Poly(N,N-Diethylacrylamide)

In this work, binary hydrogel films based on carboxylated multi-walled carbon nanotubes/poly(N,N-diethylacrylamide) (c-MWCNTs/PDEA) were successfully polymerized and assembled on a glassy carbon (GC) electrode surface. The electroactive drug probes matrine and sophoridine in solution showed reversible thermal-, salt-, methanol- and pH-responsive switchable cyclic voltammetric (CV) behaviors at the film electrodes. The control experiments showed that the pH-responsive property of the system could be ascribed to the drug components of the solutions, whereas the thermal-, salt- and methanol-sensitive behaviors were attributed to the PDEA constituent of the films. The CV signals particularly, of matrine and sophoridine were significantly amplified by the electrocatalysis of c-MWCNTs in the films at 1.02 V and 0.91 V, respectively. Moreover, the addition of esterase, urease, ethyl butyrate, and urea to the solution also changed the pH of the system, and produced similar CV peaks as with dilution by HCl or NaOH. Based on these experiments, a 6-input/5-output logic gate system and 2-to-1 encoder were successfully constructed. The present system may lead to the development of novel types of molecular computing systems.