A remote-controlled immunochemical system for nephelometric detection of human serum transferrin

Multipoint monitor of beer fermentation

This short communication is devoted to a fully-mechanized flow analysis system for the control of beer fermentation process. The developed system is based on microsolenoid flow controlling devices (valves and pumps) and a flow-through optoelectronic detector. All these components are powered and controlled by a Adruino-compatible microprocessor platform that creates an integrated, compact, and robust analytical tool. Multiplication of sample aspiration ports of the analytical system allows for simultaneous monitoring of several independently performed fermentation processes, as well as a single process at the different places of fermentation tank. To demonstrate its practical utility, the developed system has been applied for online and real-time monitoring of yeast propagation and distribution in beer worts in the course of various fermentation processes. Potentially, this flow analysis system can be easily expanded to the form of multianalyte monitor equipped with optoelectronic sensors and biosensors for the determination of other parameters and analytes.

Bioanalytical insight into the life of microbial populations: A chemical monitoring of ureolytic bacteria growth

In this publication an alternative approach to investigations of bacterial growth is proposed. Contrary to the conventional physical methods it is based on enzyme activity detection. The procedure for real-time and on-line monitoring of microbial ureolytic activity (applied as a model experimental biosystem) in the flow analysis format is presented. The developed fully-mechanized bioanalytical flow system is composed of solenoid micropumps and microvalves actuated by Arduino microcontroller. The photometric detection based on Nessler reaction is performed using dedicated flow-through optoelectronic detector made of paired light emitting diodes. The developed bioanalytical system allows discrete assaying of microbial urease in the wide range of activity up to 5.4 U mL^-1 with detection limit below 0.44 U mL^-1, a high sensitivity in the linear range of response (up to 200 mV U^-1 mL and relatively high throughput (9 detection per hour). The proposed differential procedure of measurements (i.e. a difference between peaks register for sample with and without external addition of urea is treated as an analytical signal) allows elimination of interfering effects from substrate and products of biocatalysed reaction as well as other components of medium used for microbial growth. The developed bioanalytical system was successfully applied for the control of growth of urease-positive bacteria strains (Proteus vulgaris, Klebsiella pneumoniae and Paracoccus yeei) including examination of effects from various microbial cultivation conditions like temperature, composition of culture medium and amount of substrate required for induction of bacterial enzymatic activity. The developed bioanalytical flow system can be applied for metabolic activity-based estimation of parameters of lag and log phases of microbial growth as well as for detection of decline phase.

The comparison between light-scattering detectors based on LED and photodiode for immunoprecipitation assays of transferrin and ferritin

Undoubtedly, light-emitting diodes (LEDs) and photodiodes (PDs) are indispensable optoelectronic devices in modern analytical chemistry. LEDs can serve as either light emitters or detectors, thus being an alternative to the most popular detection systems consisted of PD. In this contribution, a comparison between LED-LED and LED-PD detectors, operating in turbidimetric and nephelometric modes, has been carried out for immunoprecipitation detection of transferrin and ferritin. The greatest emphasis was placed on the study of detectors responses under different measurement conditions including current powering an emitter, amplification gain in the case of PD as detector or the construction of detection cells designed for the Multicommutated Flow Analysis (MCFA). The assumption was to obtain the fully-mechanized system with simple but efficient detection system to enable the determination of iron-binding proteins occurring at different concentration ranges in human body. As a result, the optimized arrangements of LED-LED and LED-PD setups were characterized by similar analytical characteristics, enabling the determination of transferrin with the detection limit (LOD) of 0.2 mg/L and RSDs of 2.8-4.8% for LED-LED, and LOD of 0.1 mg/L and RSDs of 0.9-3.6% for LED-PD. In the case of ferritin detection, only the response of the LED-PD detector was statistically distinguishable in the range of 130-198 μg/L of protein with recorded analytical signal change of 20 mV value. The addition of polymer for signal enhancement provided the increase of response range to 107-253 μg/L, enabling the developed system for detection of pathological serum ferritin levels.

Towards mechanized biparametric ceruloplasmin assay

Two analytical strategies for determination of both biocatalytic activity and concentration of ceruloplasmin conditions have been proposed. For this purpose, two constructions of fully-mechanized Multicommutated Flow Analysis (MCFA) systems were designed. The versatility of solenoid pumps and valves arrangement enabled to construct both manifolds using similar flow units, taking into account the different requirements for each method. In the case of ceruloplasmin catalytic activity assay, the kinetic measurements with the use of p-phenylenediamine and hydrogen peroxide were performed. The optimization process was focused on the selection of substrate and oxidizer concentration, incubation time as well as solving the issue of substrate autoxidation. It led to the development of the flow bioanalytical system characterized by following analytical parameters: LOD - 0.07 U mL^{- 1}, LOQ - 0.38 U mL^-1, RSD ≤6% with 8 μL consumption of human serum. In turn, for examination of ceruloplasmin concentration, the light-scattering detector was used in MCFA system adapted for immunoprecipitation measurements. In this case, the use of potentiator (polyethylene glycol) turned out to be necessary to obtain satisfactory analytical signals. Such a method allowed to obtain 35 measurements per hour with LOD and LOQ of 0.9 mg L^-1 and 3.2 mg L^-1, respectively. The usefulness of both MCFA systems was successfully examined by performing analyses of real human serum samples.