Target-inspired Zn2+-dependent DNAzyme for ultrasensitive impedimetric aptasensor based on polyacrylic acid nanogel as amplifier

A fluorescent aptasensor for highly sensitive and selective detection of carcinoembryonic antigen based on upconversion nanoparticles and WS2 nanosheets

A highly sensitive fluorescent aptasensor for carcinoembryonic antigen (CEA) was developed by employing upconversion nanoparticles (UCNPs) as an energy donor and WS2 nanosheets as an energy acceptor, respectively. Polyacrylic acid (PAA) modified NaYF4:Yb/Er UCNPs and an amine modified CEA aptamer were linked together by a covalent bond. Owing to the physical adsorption between WS2 nanosheets and the CEA aptamer, the UCNPs-aptamer was close to WS2 nanosheets, resulting in upconversion fluorescence energy transfer from UCNPs to WS2 nanosheets, and the UCNP fluorescence was quenched. With the introduction of CEA into the UCNPs-aptamer complex system, the aptamer preferentially bound to CEA resulting in a change in spatial conformation which caused UCNPs to depart from WS2 nanosheets. As a result, the energy transfer was inhibited and the fluorescence of UCNPs was observed again, and the degree of fluorescence recovery was linearly related to the concentration of CEA in a range of 0.05-10 ng mL-1 with a limit of detection of 0.008 ng mL-1. Furthermore, the aptasensor based on UCNPs and WS2 nanosheets could be competent for detecting CEA in human serum, which suggests the great application potential of the proposed aptasensor in clinical diagnosis.

Smart nanogels for cancer treatment from the perspective of functional groups

Introduction: Cancer remains a significant health challenge, with chemotherapy being a critical treatment modality. However, traditional chemotherapy faces limitations due to non-specificity and toxicity. Nanogels, as advanced drug carriers, offer potential for targeted and controlled drug release, improving therapeutic efficacy and reducing side effects. Methods: This review summarizes the latest developments in nanogel-based chemotherapy drug delivery systems, focusing on the role of functional groups in drug loading and the design of smart hydrogels with controlled release mechanisms. We discuss the preparation methods of various nanogels based on different functional groups and their application in cancer treatment. Results: Nanogels composed of natural and synthetic polymers, such as chitosan, alginate, and polyacrylic acid, have been developed for chemotherapy drug delivery. Functional groups like carboxyl, disulfide, and hydroxyl groups play crucial roles in drug encapsulation and release. Smart hydrogels have been engineered to respond to tumor microenvironmental cues, such as pH, redox potential, temperature, and external stimuli like light and ultrasound, enabling targeted drug release. Discussion: The use of functional groups in nanogel preparation allows for the creation of multifunctional nanogels with high drug loading capacity, controllable release, and good targeting. These nanogels have shown promising results in preclinical studies, with enhanced antitumor effects and reduced systemic toxicity compared to traditional chemotherapy. Conclusion: The development of smart nanogels with functional group-mediated drug delivery and controlled release strategies represents a promising direction in cancer therapy. These systems offer the potential for improved patient outcomes by enhancing drug targeting and minimizing adverse effects. Further research is needed to optimize nanogel design, evaluate their safety and efficacy in clinical trials, and explore their potential for personalized medicine.

Selective detection of Pb2+ ions based on a graphene field-effect transistor gated by DNAzymes in binding mode

Heavy metal contamination has become a severe threat to dairy products through contaminated feed and the environment water. Among them, Pb(II) is highly toxic to the human body even under minimal exposure. Therefore, establishing a fast and sensitive Pb2+ detection technology is significant for rapid screening of vast number of dairy products. Hererin, we report the development of a sensitive and selective Pb(II) biosensor based on a solution-gated graphene transistor (SGGT) with the gate modified by Pb2+-dependent DNAzyme probes. It has also been explored that the DNAzymes working in simple binding mode integrate better with the SGGT than those working in normal catalytic mode, showing significantly stronger channel current responses and lower detection limit down to 0.39 μg/L (or 1.9 nM). Finally, the biosensor was practicably applied to the detection of lead ions in pure milk samples with a high recovery rate. We believe that this work reveals the best strategy for integrating metal ion dependent DNAzyme probes with SGGT sensing platforms to selectively and sensitively detect many metal ions.

Z-scheme Cu2MoS4/CdS/In2S3 nanocages heterojunctions-based PEC aptasensor for ultrasensitive assay of fumonisin B1 via signal amplification with hollow PtPd–CoSnO3 nanozyme

Fumonisin B1 (FB1), the most prevalent and highest toxicity mycotoxins among fumonisins family, poses threats to human especially children and infants even at a trace level. Therefore, its facile and sensitive detection is of importance. Herein, Z-scheme Cu₂MoS₄/CdS/In₂S₃ nanocage-like heterojunctions (labeled Cu₂MoS₄/CdS/In₂S₃) were synthesized, whose photoelectrochemical (PEC) property and electron transfer mechanism were strictly investigated. The Cu₂MoS₄/CdS/In₂S₃ behaved as photoactive substrate for building a PEC sensing platform for detection of FB1, integrated with PtPd alloy modified hollow CoSnO₃ nanoboxes (labeled PtPd-CoSnO₃) nanozyme. By virtue of the stronger affinity between the target FB1 and its aptamer (FB1-Apt), the photocurrent was recovered by releasing the CoSnO₃-PtPd₃ modified FB1-Apt (FB1-Apt/PtPd-CoSnO₃) from the photoanode, which can terminate the catalytic precipitation reaction for its peroxidase-like property. The resultant PEC aptasensor exhibited a wider dynamic linear range from 1 × 10^-4 to 1 × 10² ng mL^-1 with a lower limit of detection (0.0723 pg mL^-1). Thus, this research provides a feasible PEC sensing platform for routine analysis of other mycotoxins in practice.

Ultra-sensitive detection of streptomycin in foods using a novel SERS switch sensor fabricated by AuNRs array and DNA hydrogel embedded with DNAzyme

Detrimental health effects caused by the intake of food contaminated with streptomycin have drawn concerns on effective monitoring using sensitive and selective methods. In this work, a DNA hydrogel surface enhanced Raman spectroscopy (SERS) sensor was successfully developed for the ultrasensitive determination of streptomycin residues in foods. The sensor used a DNA hydrogel containing DNAzyme (Pb-DNAzyme), triggering release of the Raman reporter 4-mercaptobenzonitrile, which was detected using a gold nanorods (AuNRs) array. The linear range of the sensor was 0.01-150 nM and the limit of detection was 4.85 × 10^-3 nM. Tests conducted with four streptomycin structural analogues confirmed the sensor was specific. Milk and honey samples spiked with streptomycin were analysed, resulting in standard recoveries in the range 98.2-117.3%. These findings demonstrated that such a sensor can be used for ultrasensitive detection of streptomycin in foods.

Ultrasenstive SERS biosensor based on Zn2+ from ZnO nanoparticle assisted DNA enzyme amplification for detection of miRNA

In this work, a simple and sensitive SERS biosensor was proposed for ultrasensitive detecting miRNA 122 based on ZnO nanoparticle amplification strategy and the full utilization of DNA chain. Firstly, ZnO@S1/S2 and CoFe₂O₄@S3 complexes can flock together with the assistance of target miRNA. Accompanied with the incremental amount of miRNA, the quantity of ZnO@S1/S2 would increase. Therefore, a significant amplification capability can be obtained by converting ZnO complexes into Zn²⁺ with the assistance of HCl. In this case, the DNA chain S2 can be obtained by the ZnO dissolving. In addition, through a clever design, the obtained Zn²⁺ can be further utilized to induce DNA enzyme cycle amplification to cleave S5 into DNA chain which was similar with DNA S2. This step greatly avoided the waste of DNA chains and improved the utilization efficiency of DNA chains. The S2 and abundant S2 analogues can complement with S4 on the Raman sensing interface to imbed lots of Raman probe DOX for obtaining strong Raman signal. By this way, with the increased number of miRNA, the S2 and abundant S2 analogues would increase, so the amount of DOX would increase to produce strong Raman signal to quantitatively detect target miRNA. As a result, this SERS biosensor based on Zn⁺ amplification and high utilization efficiency of DNA chain can obtain a low detection limit of 6.82 aM and wide linear range from 10 aM to 10 pM, which shown great potential in the clinical application and medical diagnosis.

An electrochemical aptasensor based on target triggered multiple-channel DNAzymes cycling amplification strategy with PtFe@Co-MOF as signal amplifier

A novel electrochemical aptasensor for the detection of Aflatoxin B1 (AFB1) was developed for the first time by using the target-triggered multiple-channel deoxyribozymes (DNAzymes) cycling amplified assay with Pt Fe doped NH₂-Co-MOF (PtFe@Co-MOF) as a signal amplifier. In the presence of AFB1, a self-assembling cross-over nucleic structure could be triggered by AFB1 via two aptamers' structure switching for strand displacement, resulting in four channels of Mg²⁺-dependent DNAzyme recycling simultaneously to multiply the detection signals. These DNAzymes cyclically split the substrate sequence to release the PtFe@Co-MOF labeled detection probe (DP), which is subsequently hybridized with the capture probes on the Au-deposited glassy carbon electrode. The fabrication procedure was characterized by differential pulse voltammetry, and the results of the morphological and element composition characteristics methods were analyzed to determine the successful preparation of PtFe@Co-MOF. The limit of detection (LOD) for AFB1 detection was 2 pg mL^-1 with a linear range from 5 pg mL^-1 to 80 ng mL^-1. By comparison, the enhanced detection sensitivity has been found to originate from the efficient shearing of DNAzymes, enhanced peroxidase-like capability, and multiple active sites of PtFe@Co-MOF. Besides, this aptasensor showed high specificity for AFB1 compared with similar mycotoxins and exhibited high accuracy with low experimental cost and easy operation. Furthermore, the unique design of electrochemical aptasensors could provide a promising platform for the onsite determination of AFB1, as well as other targets by replacing the aptamer and other core recognition sequences.

Electrochemistry/Photoelectrochemistry-Based Immunosensing and Aptasensing of Carcinoembryonic Antigen

Recently, electrochemistry- and photoelectrochemistry-based biosensors have been regarded as powerful tools for trace monitoring of carcinoembryonic antigen (CEA) due to the fact of their intrinsic advantages (e.g., high sensitivity, excellent selectivity, small background, and low cost), which play an important role in early cancer screening and diagnosis and benefit people's increasing demands for medical and health services. Thus, this mini-review will introduce the current trends in electrochemical and photoelectrochemical biosensors for CEA assay and classify them into two main categories according to the interactions between target and biorecognition elements: immunosensors and aptasensors. Some recent illustrative examples are summarized for interested readers, accompanied by simple descriptions of the related signaling strategies, advanced materials, and detection modes. Finally, the development prospects and challenges of future electrochemical and photoelectrochemical biosensors are considered.

Photoelectric effect driving PANI/PB multicolor visualized detection of CEA based on Ag2S NPs@ZnO NTs

In this work, a multicolor visual immunoassay platform was developed. The photoelectric effects of Ag₂S NPs@ZnO NTs made the color changes of PANI/PB, which enabled visual inspection of CEA. Under the visible light excitation, Ag₂S NPs@ZnO NTs generates electron-holes. Where, photoelectrons will pass electrical circuit to PB and photoinduced holes will oxidize PANI, which making the PANI/PB composite changes from emerald green-blue-purple-black colors. When CEA was incubated, the migration rate of photogenerated carriers is slowed down owing to the steric hindrance, resulting in different color changes of PANI/PB. In addition, the average green channel of PANI/PB read by photoshop has a certain correlated linear relationship with the concentration of CEA. Meanwhile, we can observe the color transformation of PANI/PB with our own eyes. By integrating advantages of photoelectrochemistry and colorimetry, the linear range of CEA detection was 0.1-20 ng/mL, and the detection limit was 0.05 ng/mL (S/N = 3). More importantly, this multicolor sensing method is very convenient, simple and low-cost. The photocarriers-modulated colorimetric strategy also provides a novel idea for visual portable platform design in clinical diagnosis.

Nanomaterials for Healthcare Biosensing Applications

In recent years, an increasing number of nanomaterials have been explored for their applications in biomedical diagnostics, making their applications in healthcare biosensing a rapidly evolving field. Nanomaterials introduce versatility to the sensing platforms and may even allow mobility between different detection mechanisms. The prospect of a combination of different nanomaterials allows an exploitation of their synergistic additive and novel properties for sensor development. This paper covers more than 290 research works since 2015, elaborating the diverse roles played by various nanomaterials in the biosensing field. Hence, we provide a comprehensive review of the healthcare sensing applications of nanomaterials, covering carbon allotrope-based, inorganic, and organic nanomaterials. These sensing systems are able to detect a wide variety of clinically relevant molecules, like nucleic acids, viruses, bacteria, cancer antigens, pharmaceuticals and narcotic drugs, toxins, contaminants, as well as entire cells in various sensing media, ranging from buffers to more complex environments such as urine, blood or sputum. Thus, the latest advancements reviewed in this paper hold tremendous potential for the application of nanomaterials in the early screening of diseases and point-of-care testing.

A novel label-free electrochemical impedance aptasensor for highly sensitive detection of human interferon-gamma based on target-induced exonuclease inhibition

In this paper, a novel label-free electrochemical impedance aptasensor for highly sensitive detection of IFN-γ based on target-induced exonuclease inhibition was constructed. For this purpose, we designed a DNA hairpin modified on the gold electrode whose loop was the aptamer of the IFN-γ, and the stem was 5'-thiol-modified. In the absence of IFN-γ, Exonuclease III (Exo III) and Exonuclease I (Exo I) digested the double-stranded and single-stranded strands of the hairpin DNA, respectively, causing smaller impedance value on the surface of the electrode. In the presence of IFN-γ, the function of Exo III was greatly inhibited by the binding of the aptamer with the target, and it stopped after cutting three bases of the hairpin DNA. Forming a major target-bound aptamer digestion product, it could not be digested by Exo I, so there was larger impedance on the electrode surface. The calibration curve for IFN-γ was linear in the range of 1 pM-50 nM with the detection limit (LOD) of 0.7 pM_. The proposed aptasensor proved good selectivity and reproducibility, and low cost. In addition, the biosensor was able to detect IFN-γ in serum samples successfully, which is expected to provide an efficient method for TB diagnosis at early stages.