Sensor for ampicillin based on a microwave electrodynamic resonator

Dual-channel fluorescent sensors based on chitosan-coated Mn-doped ZnS micromaterials to detect ampicillin

The global threat of antibiotic resistance has increased the importance of the detection of antibiotics. Conventional methods to detect antibiotics are time-consuming and require expensive specialized equipment. Here, we present a simple and rapid biosensor for detecting ampicillin, a commonly used antibiotic. Our method is based on the fluorescent properties of chitosan-coated Mn-doped ZnS micromaterials combined with the β-lactamase enzyme. The biosensors exhibited the highest sensitivity in a linear working range of 13.1-72.2 pM with a limit of detection of 8.24 pM in deionized water. In addition, due to the biological specificity of β-lactamase, the proposed sensors have demonstrated high selectivity over penicillin, tetracycline, and glucose through the enhancing and quenching effects at wavelengths of 510 nm and 614 nm, respectively. These proposed sensors also showed promising results when tested in various matrices, including tap water, bottled water, and milk. Our work reports for the first time the cost-effective (Mn:ZnS)Chitosan micromaterial was used for ampicillin detection. The results will facilitate the monitoring of antibiotics in clinical and environmental contexts.

In-human testing of a non-invasive continuous low-energy microwave glucose sensor with advanced machine learning capabilities

Continuous glucose monitoring schemes that avoid finger pricking are of utmost importance to enhance the comfort and lifestyle of diabetic patients. To this aim, we propose a microwave planar sensing platform as a potent sensing technology that extends its applications to biomedical analytes. In this paper, a compact planar resonator-based sensor is introduced for noncontact sensing of glucose. Furthermore, in vivo and in-vitro tests using a microfluidic channel system and in clinical trial settings demonstrate its reliable operation. The proposed sensor offers real-time response and a high linear correlation (R2 ∼ 0.913) between the measured sensor response and the blood glucose level (GL). The sensor is also enhanced with machine learning to predict the variation of body glucose levels for non-diabetic and diabetic patients. This addition is instrumental in triggering preemptive measures in cases of unusual glucose level trends. In addition, it allows for the detection of common artifacts of the sensor as anomalies so that they can be removed from the measured data. The proposed system is designed to noninvasively monitor interstitial glucose levels in humans, introducing the opportunity to create a customized wearable apparatus with the ability to learn.

Microwave resonator-based sensor system for specific antibody detection

An antibody-detecting sensor is described that is based on a microwave electrodynamic resonator. A polystyrene film with immobilized bacteria deposited on a lithium niobate plate was placed at one end of the resonator and was used as the sensing element. The second end was electrically shorted. The frequency and depth of the reflection coefficient S11 for three resonances in the range 6.5-8.5 GHz were used as an analytical signal to examine antibody interactions with bacteria and determine the time required for cell immobilization. The sensor distinguished between situations in which bacteria interacted with specific antibodies and those in which no such interaction occurred (control). Although the cell-antibody interaction changed the frequency and depth of the second and third resonance peaks, the parameters of the first resonance peak did not change. The interaction of cells with nonspecific antibodies did not change the parameters of any of the peaks. These results are promising for use in the design of methods to detect specific antibodies, which can supplement the existing methods of antibody analysis.

Microbial acoustic sensor test-system based on a piezoelectric resonator with a lateral electric field for kanamycin detection in liquid

A microbial test-system for real-time determination of low/residual concentrations of kanamycin in a liquid without the need for special labels is presented. The main element of the system was a piezoelectric resonator excited by a lateral electric field based on an X-cut lithium niobate plate 0.5 mm thick with two rectangular electrodes on one side. On the other side of the resonator, there was a 1.5 ml liquid container. As a sensory element we used Escherichia coli B-878 microbial cells, which are sensitive to kanamycin. For measurement 1 ml of this cells suspension was placed in a liquid container and then the test liquid in the amount of 2 μl containing kanamycin was added. The change in the real part of the electrical impedance of the resonator before and after the test liquid addition was used as an analytical signal which indicated the presence of kanamycin. The lower limit of determination of kanamycin turned out to be 1.0 μg/ml with an analysis time of 10 min. The test-system allows to detect kanamycin in the presence of such antibiotic as ampicillin and polymixin.

Bacteria-based electro-optical platform for ampicillin detection in aquatic solutions

We have shown for the first time that it is possible to use a bacteria-based sensory system consisting of the bacterium Pseudomonas putida TSh-18 and an electro-optical sensor to detect ampicillin in the concentration range 0.5-600 μg/mL. Changes in the anisotropy of cell polarizability were detected at 900 and 2100 kHz; these represented the state of the cytoplasm and of the cell membrane, respectively. The changes indicate the quickest cell response to changes in the characteristics of the bacterial culture exposed to ampicillin. We have also shown that it is possible to monitor the ampicillin in the presence of kanamycin. In control experiments, we examined the effects of ampicillin and kanamycin on bacterial cells by phase-contrast microscopy and by standard microbiological tests on solid media. P. putida TSh-18 is recommended as a sensor system for ampicillin detection. Electro-optical analysis ensures detection of ampicillin in aquatic solutions in real-time, takes 10 min, and offers a lower limit of ampicillin detection of 0.5 μg/mL, which is lower than the European Community's maximum residue limit standards for penicillin antibiotics.

A novel label-free photoelectrochemical aptasensor for the sensitive detection of ampicillin based on carbon-coated Bi2S3 nanorods

The prepared Bi2S3@C nanorods with remarkable photoelectrochemical properties served as a PEC sensor platform for the ultrasensitive analysis of ampicillin.

Electrochemical assay of ampicillin using Fe3N-Co2N nanoarray coated with molecularly imprinted polymer

Self-supported Fe₃N-Co₂N nanoarray with high electric conductivity and large surface area was prepared for growth of MIPs and further constructing a sensitive and stable electrochemical sensor. For the evaluation of its performance, Fe₃N-Co₂N is used as sensing electrode material, and AMP is used as template molecule to construct the MIP electrochemical sensor. Under the optimized conditions, the developed MIPs electrochemical sensor detects AMP with a low detection limit of 3.65 × 10^-10 mol L^-1 and shows outstanding reproducibility and stability. When the MIPs electrochemical sensor was applied to detect AMP in milk samples via standard addition method, the recovery within 97.06-102.43% with RSD of 1.05-2.11% was obtained. The fabrication of MIPs electrochemical sensor is highly promising for sensitive and selective electrochemical measurement and food safety testing. This work can provide theoretical guidance for truly challenging problems. Graphical abstract Principle diagram of MIP-EC sensor for detecting AMP Molecular imprinted polymers (MIPs) are widely performed for construction of electrochemical (EC) sensors especially for detecting small molecules in complex environment. However, the large-scale and robust preparation of MIPs in situ on sensor platform limits their practical applications. We fabricated a MIPs EC sensor based on Fe₃N-Co₂N in situ grown on carbon cloth (CC) as the substrate platform (Fe₃N-Co₂N/CC) combining with MIPs as the target recognition element for the label-free detection of AMP. Under the optimal conditions, the developed MIPs EC sensor can detect AMP with a low detection limit of 3.65 × 10^-10 mol L^-1. When the AMP in milk is detected by the proposed EC sensor, it shows ideal results. Therefore, the use of self-supported Fe₃N-Co₂N nanoarray as the platform for the fabrication of MIPs EC sensors is highly promising for sensitive and selective EC measurement and point-of-care testing.

An aptasensor for the detection of ampicillin in milk using a personal glucose meter

Antibiotic residues in foods have aroused wide public concern because of their potential side-effects. It is imperative to develop a simple, accurate and reliable method for the detection of antibiotic residues in foods. In this paper, we report a novel, facile and sensitive method for the detection of ampicillin in milk using a commercial personal glucose meter (PGM). Magnetic beads (MBs) were employed as the platform, an ampicillin aptamer was used as the recognition element and streptavidin was utilized as the bridge to link invertase and the aptamer. After the hydrolysis of sucrose to glucose, the concentration of glucose was quantitatively measured using the PGM. The difference of PGM signals with and without addition of ampicillin exhibits a good linear correlation with the logarithm of ampicillin concentrations in the range of 2.5 × 10-10 mol L-1 to 1.0 × 10-7 mol L-1 with a detection limit of 2.5 × 10-10 mol L-1 (S/N = 3). Finally, the proposed method was successfully applied for the detection of ampicillin residue in milk.

A fiber optic nanoplasmonic biosensor for the sensitive detection of ampicillin and its analogs

A novel optical immunosensor for the screening of ampicillin (Amp) residues has been developed. The biosensor is based on fiber optic particle plasmon resonance detection and uses an enhancement method called as fiber optic nanogold-linked immunosorbent assay (FONLISA) for the sensitive detection of antibiotics. A commercial antibody which had a higher affinity for ampicillin than for other β-lactam antibiotics was chosen. A surface competitive binding assay was used in which a fixed concentration of antibiotic-conjugated gold nanoparticles (AuNPs) competes with free unlabeled antibiotic molecules to measure the amount of binding with antibody molecules immobilized on an optical fiber. The synthesis of the 11-mercaptoundecanoic acid (MUA)-ampicillin conjugate facilitates the attachment of the Amp molecules to AuNPs via MUA which acts as a linker between them. This AuNP-Amp conjugate was then used for the detection of β-lactam antibiotics. The practical limit of detection obtained for Amp was 0.74 ppb (7.4 × 10^-10 g/mL) which is lower than the recommended maximum residue limit (MRL) for β-lactams. The method also shows a wide linear range of 4 orders. Its applicability to the determination of ampicillin in spiked milk samples has been demonstrated with good recovery and reproducibility. Graphical abstract.