Saliva-coated titanium biosensor detects specific bacterial adhesion and bactericide caused mass loading upon cell death

Recent Advancements and Applications of Nanosensors in Oral Health: Revolutionizing Diagnosis and Treatment

Advances in the field of nanomaterials are laying the foundation for the fabrication of nanosensors that are sensitive, selective, specific, cost-effective, biocompatible, and versatile. Being highly sensitive and selective, nanosensors are crucial in detecting small quantities of analytes and early diagnosis of diseases. These devices, operating on the nanoscale, detect signals, such as physical, chemical, optical, electrochemical, or biological, and then transduce them into a readable form. They show great promise for real-time, point-of-care, and home-based applications in health care. With the integration of wireless technology, these nanosensors, specifically biosensors, can potentially revolutionize therapeutic techniques. These advancements particularly impact the oral cavity, the primary entry point for various bodily substances. Nanosensors can transform oral and dental health practices, enabling timely disease diagnosis and precise drug delivery. This review examines the recent advancements in nanobiosensors, exploring their applications in various oral health conditions while discussing their benefits and potential limitations.

Acoustofluidic one-step production of plasmonic Ag nanoparticles for portable paper-based ultrasensitive SERS detection of bactericides

SERS measurements for monitoring bactericides in dairy products are highly desired for food safety problems. However, the complicated preparation process of SERS substrates greatly impedes the promotion of SERS. Here, we propose acoustofluidic one-step synthesis of Ag nanoparticles on paper substrates for SERS detection. Our method is economical, fast, simple, and eco-friendly. We adopted laser cutting to cut out appropriate paper shapes, and aldehydes were simultaneously produced at the cutting edge in the pyrolysis of cellulose by laser which were leveraged as the reducing reagent. In the synthesis, only 5 μL of Ag precursor was added to complete the reaction, and no reducing agent was used. Our recently developed acoustofluidic device was employed to intensely mix Ag+ ions and aldehydes and spread the reduced Ag nanoparticles over the substrate. The SERS substrate was fabricated in 1 step and 3 min. The standard R6G solution measurement demonstrated the excellent signal and prominent uniformity of the fabricated SERS substrates. SERS detection of the safe concentration of three bactericides, including tetracycline hydrochloride, thiabendazole, and malachite green, from food samples can be achieved using fabricated substrates. We take the least cost, time, reagents, and steps to fabricate the SERS substrate with satisfying performance. Our work has an extraodinary meaning for the green preparation and large-scale application of SERS.

A balance of biocompatibility and antibacterial capability of 3D printed PEEK implants with natural totarol coating

OBJECTIVE

Polyetheretherketone (PEEK), a biomaterial with appropriate bone-like mechanical properties and excellent biocompatibility, is widely applied in cranio-maxillofacial and dental applications. However, the lack of antibacterial effect is an essential drawback of PEEK material and might lead to infection and osseointegration issues. This study aims to apply a natural antibacterial agent, totarol coating onto the 3D printed PEEK surface and find an optimized concentration with balanced cytocompatibility, osteogenesis, and antibacterial capability.

METHODS

In this study, a natural antibacterial agent, totarol, was applied as a coating to fused filament fabrication (FFF) 3D printed PEEK surfaces at a series of increasing concentrations (1 mg/ml, 5 mg/ml, 10 mg/ml, 15 mg/ml, and 20 mg/ml). The samples were then evaluated for cytocompatibility with L929 fibroblast and SAOS-2 osteoblast using live/dead staining and CCK-8 assay. The antibacterial capability was assessed by crystal violet staining, live/dead staining, and scanning electron microscopy (SEM) utilizing the oral primary colonizer S. gordonii and isolates of mixed oral bacteria in a stirring system simulating the oral environment. The appropriate safe working concentration for totarol coating is selected based on the results of the cytocompatibility and antibacterial test. Subsequently, the influence on osteogenic differentiation was evaluated by alkaline phosphatase (ALP) and alizarin red staining (ARS) analysis of pre-osteoblasts.

RESULTS

Our results showed that the optimal concentration of totarol solution for promising antibacterial coating was approximately 10 mg/ml. Such surfaces could play an excellent antibacterial role by inducing a contact-killing effect with an inhibitory effect against biofilm development without affecting the healing of soft and hard tissues around FFF 3D printed PEEK implants or abutments.

SIGNIFICANCE

This study indicates that the totarol coated PEEK has an improved antibacterial effect with excellent biocompatibility providing great clinical potential as an orthopedic/dental implant/abutment material.

Biomacromolecular Characterizations Using State-of-the-Art Quartz Crystal Microbalance with Dissipation

Biomolecular characterization is essential in fields such as drug discovery, glycomics, and cell biology. This feature article focuses on the experimental use of quartz crystal microbalance with dissipation (QCM-D) as a powerful analytical technique to probe biological events ranging from biomacromolecular interactions and conformational changes of biomacromolecules to surface immobilization of biomacromolecules and cell morphological changes.

A Review on Saliva-Based Health Diagnostics: Biomarker Selection and Future Directions

The human body has a unique way of saying when something is wrong with it. The molecules in the body fluids can be helpful in the early detection of diseases by enabling health and preventing disease progression. These biomarkers enabling better healthcare are becoming an extensive area of research interest. Biosensors that detect these biomarkers are becoming the future, especially Point Of Care (POC) biosensors that remove the need to be physically present in the hospital. Detection of complex and systemic diseases using biosensors has a long way to go. Saliva-based biosensors are gaining attention among body fluids due to their non-invasive collection and ability to detect periodontal disease and identify systemic diseases. The possibility of saliva-based diagnostic biosensors has gained much publicity, with companies sending home kits for ancestry prediction. Saliva-based testing for covid 19 has revealed effective clinical use and relevance of the economic collection. Based on universal biomarkers, the detection of systemic diseases is a booming research arena. Lots of research on saliva-based biosensors is available, but it still poses challenges and limitations as POC devices. This review paper talks about the relevance of saliva and its usefulness as a biosensor. Also, it has recommendations that need to be considered to enable it as a possible diagnostic tool.

Graphical Abstract

Chiral zinc oxide functionalized quartz crystal microbalance sensor for enantioselective recognition of amino acids

Chiral transition metal oxides with tunable structures and multiple physicochemical features have been increasingly applied for chiral sensing and detection. In this work, chiral zinc oxide (ZnO) was first applied as selector to construct quartz crystal microbalance (QCM) sensor for enantioselective recognition of amino acids. The chiral ZnO was prepared by a methionine-induced self-assembly strategy and its high topological chirality was confirmed by several techniques such as circular dichroism spectrum. The chiral discrimination factors were calculated by frequency shifts in response to aspartic acid, phenylalanine, lysine and arginine on L-ZnO surface, achieving 1.89 ± 0.04, 1.76 ± 0.11, 1.66 ± 0.07 and 1.54 ± 0.09, respectively. Notably, L-enantiomers preferred stronger absorptions on L-ZnO surface as compared to D-forms. It was further found that this sensor was appropriate for quantitative analysis and enantiomer excess analysis and adsorption kinetics study. Furthermore, molecular docking revealed the recognition mechanism, where chiral distinction was caused by the different steric interactions between enantiomers and chiral ZnO. This method enjoyed merits of high enantioselectivity, simple preparation and low cost, offering newly chiral sensing method for other molecules.

Advanced co-culture model: Soft tissue cell and bacteria interactions at the transgingival dental implant interface

OBJECTIVES

To better simulate and understand the clinical situation in which tissue cells and bacteria compete for settlement on an implant surface, the aim was to develop an improved transgingival co-culture model.

METHODS

For this model human gingival fibroblasts (HGF) were seeded on different titanium surfaces in the presence of the early colonizer Streptococcus gordonii or mixed oral bacteria. Subsequently adhesion and viability of HGF cells was analyzed.

RESULTS

Simultaneous co-culture showed no decrease in the viability of HGF cells at early stages compared to the control group. However, a moderate impact on HGF viability (76 ± 23 %) was observed after 4 h of co-culture, which then significantly decreased after 5 h (21 ± 2 %) of co-cultivation, resulting in cell death and detachment from the surface. Further experiments including saliva pre-treatment of smooth and structured titanium surfaces with Streptococcus gordonii or mixed oral bacteria suggested a cell-protective property of saliva.

SIGNIFICANCE

Our study revealed that during simultaneous co-culture of cells and bacteria, which resembles the clinical situation the closest, the viability of gingival cells is considerably high in the early phase, suggesting that increasing initial cell adhesion rather than antibacterial functionality is a major goal and a relevant aspect in the development and testing of transgingival implant and abutment surface modifications.

Ionic Strength-Dependent Attachment of Pseudomonas aeruginosa PAO1 on Graphene Oxide Surfaces

Graphene oxide (GO) is a widely used antimicrobial and antibiofouling material in surface modification. Although the antibacterial mechanisms of GO have been thoroughly elucidated, the dynamics of bacterial attachment on GO surfaces under environmentally relevant conditions remain largely unknown. In this study, quartz crystal microbalance with dissipation monitoring (QCM-D) was used to examine the dynamic attachment processes of a model organism Pseudomonas aeruginosa PAO1 onto GO surface under different ionic strengths (1-600 mM NaCl). Our results show the highest bacterial attachment at moderate ionic strengths (200-400 mM). The quantitative model of QCM-D reveals that the enhanced bacterial attachment is attributed to the higher contact area between bacterial cells and GO surface. The extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory and atomic force microscopy (AFM) analysis were employed to reveal the mechanisms of the bacteria-GO interactions under different ionic strengths. The strong electrostatic and steric repulsion at low ionic strengths (1-100 mM) was found to hinder the bacteria-GO interaction, while the limited polymer bridging caused by the collapse of biopolymer layers reduced cell attachment at a high ionic strength (600 mM). These findings advance our understanding of the ionic strength-dependent bacteria-GO interaction and provide implications to further improve the antibiofouling performance of GO-modified surfaces.

Appropriately adapted properties of hot-extruded Zn-0.5Cu-xFe alloys aimed for biodegradable guided bone regeneration membrane application

Appropriately adapted comprehensive mechanical properties, degradation behavior and biocompatibility are prerequisites for the application of Zn-based biodegradable implants. In this study, hot-extruded Zn-0.5Cu-xFe (x = 0.1, 0.2 and 0.4 wt%) alloys were fabricated as candidates for biodegradable materials for guided bone regeneration (GBR) membranes. The hot-extrusion process and Cu alloying were expected mostly to enhance the mechanical properties, and the Fe alloying was added mainly for regulating the degradation. The microstructure, mechanical properties and in vitro degradation behavior were systematically investigated. The ZnCuFe alloys were composed of a Zn matrix and FeZn₁₃ phase. With increasing Fe content, a higher FeZn₁₃ phase precipitation with larger particles was observed. Since elongation declined significantly until fracture with increasing Fe content up to 0.4 wt%, the ZnCuFe (0.2 wt%) alloy achieved a good balance between mechanical strength and ductility, with an ultimate tensile strength of 202.3 MPa and elongation at fracture of 41.2%. Moreover, the addition of Fe successfully accelerated the degradation of ZnCuFe alloys. The ZnCuFe (0.2 wt%) alloy showed relatively uniform corrosion in the long-term degradation test. Furthermore, extracts of the ZnCuFe (0.2 wt%) alloy showed no apparent cytotoxic effects against L929 fibroblasts, Saos-2 osteoblasts or TAg periosteal cells. The ZnCuFe (0.2 wt%) alloy exhibited the potential to inhibit bacterial adhesion of Streptococcus gordonii and mixed oral bacteria. Our study provides evidence that the ZnCuFe (0.2 wt%) alloy can represent a promising material for the application as a suitable GBR membrane.

Use of Protein Repellents to Enhance the Antimicrobial Functionality of Quaternary Ammonium Containing Dental Materials

An advancement in preventing secondary caries has been the incorporation of quaternary ammonium containing (QAC) compounds into a composite resin mixture. The permanent positive charge on the monomers allows for electrostatic-based killing of bacteria. Spontaneous adsorption of salivary proteins onto restorations dampens the antimicrobial capabilities of QAC compounds. Protein-repellent monomers can work with QAC restorations to achieve the technology's full potential. We discuss the theory behind macromolecular adsorption, direct and indirect characterization methods, and advances of protein repellent dental materials. The translation of protein adsorption to microbial colonization is covered, and the concerns and fallbacks of the state-of-the-art protein-resistant monomers are addressed. Last, we present new and exciting avenues for protein repellent monomer design that have yet to be explored in dental materials.

Application of totarol as natural antibacterial coating on dental implants for prevention of peri-implantitis

Peri-implantitis is the most important issue threatening the long-term survival rate of dental implants. Various efforts have been made to reduce implant surface plaque formation, which is one of the essential causes of peri-implantitis. In our study, we applied the natural antibacterial agent totarol as a coating on experimental silicon wafer and titanium implant surfaces. To analyze the interaction between the totarol coating and the oral primary colonizer S. gordonii and isolates of mixed oral bacteria, samples were incubated in a model system simulating the oral environment and analyzed by Live/Dead staining, crystal violet staining and scanning electron microscopy (SEM). After 4 d, 8 d, 12 d, 16 d, and 24 d salivary incubation, the stability and antibacterial efficiency of totarol coating was evaluated through SEM. The results indicated that totarol coatings on both silicon wafer and Ti surfaces caused efficient contact killing and an inhibition effect towards S. gordonii and mixed oral bacterial film growth after 4 h, 8 h, 24 h, and 48 h incubation. After longtime salivary incubation of 12 d, the bactericidal effect started to weaken, but the anti-adhesion and inhibition effect to biofilm development still exist after 24 d of salivary incubation. The application of a totarol coating on implant or abutment surfaces is a promising potential prophylactic approach against peri-implantitis.